Great video. Personally. I would run everything through fuses. Better to be safe than sorry

In general, the TI units are faster in response to inputs. This is seen when quickly switching between sonar, downscan, chart, and split screens kzread.infoUgkxeAxH15LxhjGlg5-CRYqjTGTEH0tbY4vk recommend The Hook units will show some lag on button pushes and screen switching. The big ticket item though is maps. If you install a mapping card such as Navionics or the free C-Map Genesis which has a lot of map detail, then moving around the map with the cursor or when running down the lake can lag significantly on the Hook units, but is seamless with the TI units.

1 1/8 keyhole saw is the right size for drilling the holes for those accessories, no sanding or grinding needed. Wago electric connectors are the best for wiring saves a lot of time.

Great build! Wire strippers are nice also add step bits for holes and cutting pliers for them wires.

Nice idea on the box. These portable power boxes are fantastic. Im going to get busy working on one for my kayak. One thing i know that works great for drilling larger holes in plastic are step drills. Harbor freight sells a 3 pc. Set and they work great. Nice build, and thanks for a few ideas!👍

Thanks for the great video. No experience of electronics but managed to build a box following your video.

Great information, I shall be trying this out shortly, thank you!!

I’ve been wanting to make some of these for a while, you’re video is very instructional and you can see exactly how you did it, which other video’s don’t show. I also just purchased that fish finder and wanted to make sure I had the right idea for powering it, great minds think alike!

@TheSpeedofTim

2 жыл бұрын

Glad you found it beneficial Travis. And you'll love that fishfinder, it's changed the game for me. Tight lines!

Great job. Thank you for the video, it was really helpful and nice. Thanks

Thanks, I’m now going to build one.

step up bit works great for those holes. Great work.

@TheSpeedofTim

3 жыл бұрын

I agree, just couldn't find mine. Probably time to pick up a replacement.

This was awesome!!!! I want to make one of these!!!!

@TheSpeedofTim

3 жыл бұрын

Go for it! They're not too tough to build and come in super handy on the kayak and in camp.

@southcoastairsports

2 жыл бұрын

@@TheSpeedofTim could you make one and wire it up for me and ship and ill pay the costs

Very nice. Thanks for sharing

@TheSpeedofTim

3 жыл бұрын

Hope it was beneficial. Have a good one!

Great video! Thanks!

@TheSpeedofTim

3 жыл бұрын

Glad you enjoyed it. Have a good one. Tight lines!

Great job.... 🙏🏻

Hell yea man good stuff keep it up

@TheSpeedofTim

3 жыл бұрын

Thank you my friend

Nice job.

@TheSpeedofTim

3 жыл бұрын

Thanks!

thx. great video.

@TheSpeedofTim

3 жыл бұрын

Glad it was helpful. Tight lines!

Great tutorial! thanks !

@TheSpeedofTim

3 жыл бұрын

Hope it was helpful, and thanks!

You can plug a small solar panel battery maintauner that SAE plug too. I did that on my 97 Blazer and it works perfect.

@TheSpeedofTim

3 жыл бұрын

Great tip. I was thinking of adding a way to charge via solar soon. Good to know it works. Thanks!

Great job. The battery boxes here in Australia (and probably every where) are either really crappy or way over priced. This has better features and a battery and heaps cheaper and I found all the parts easily. Stoked. Thankyou!

@TheSpeedofTim

3 жыл бұрын

Glad to hear! I noticed the same here as well. Lots of additional cost for pretty much the same thing. Best of luck with your build!

Crimper. Thanks nice video

Thank you for the video, very helpful! What economical battery charger would you suggest?

If you want to make a quick improvement, change your wiring from serial to parallel; this will negate the voltage drop you have at each consecutive power outlet.

@TheSpeedofTim

3 жыл бұрын

Thanks for the tip! This was my first and I plan to build an improved model in the near future.

@forgetyourlife

2 жыл бұрын

Can you describe the change that needs to be done? How do you make it parallel?

@KayleighSionnach

2 жыл бұрын

@@forgetyourlife Google can probably explain it better, but serial is where your circuit goes from one device to another, to another, to another, etc. You will get a Voltage drop after each device, and if one device goes out your entire circuit will break. Parallel is more like having two trunks, one for positive and one for negative and your devices connect to the trunk....there will still be a voltage drop because power is being used, but it will be the same voltage delivered to all devices rather than stepping down after each device; which can get complicated to compute for voltage sensitive things like LEDs. Also if a device in parallel fails, your circuit will not break.

@tatefinkbeiner8000

2 жыл бұрын

So on this setup what would I need to change to make it parallel instead of series?

Nice layout! I suggest a step bit for the holes, much cleaner and less to clean up afterwards.

@TheSpeedofTim

2 жыл бұрын

I agree! Still need to grab one next time I'm at harbor freight

@allkindsofoutdooractivities

2 жыл бұрын

They definitely make your life easier. I got mine on Amazon

Great video brother nice job 👍 New sub

@TheSpeedofTim

3 жыл бұрын

Thanks my friend

Nice video. What happens when your turn on the power switch when you turn on the fish finder?

4:14 Paddle bits have no place in my toolbox. Use a step drill to get really tidy holes in thin plastic or alloy.

Awesome video, thanks for showing all of the dirty work it takes to achieve a clean look. Do you think you would ever need a 7.5 fuse going from the battery to the quick connect plug? I know it is recommended when connecting a trolling motor to a larger battery but just not sure if it is needed here. The main reason I ask is that I'm working on a similar setup and in my stash of wires I have an in-line 7.5 fuse.

@TheSpeedofTim

3 жыл бұрын

Good question. My wiring to my fish finder +which I use this for) already has an online fuse. There's no fuse on the provided charger, so I opted to not have one. Wouldn't hurt though, as long as you're still allowing enough juice through. Glad it was helpful!

All your batteries should be fused (at the Positive Pole) whether or not they're connected to something that's fused... Batteries will have a melt down if shorted and not fused... Ask me how I know.

I like the way you made the power box when make mine I will be using it for Amateur radio portable Ham Station. THANKS for the idea.73 AE4OY WILLIE P.EM-81uf 🤓⚡🔥😁

@TheSpeedofTim

3 жыл бұрын

That's super cool! I remember my dad had a friend that was into Ham radio. Always loved check out his gear and chatting. Best of luck on the build!

@brianmartin7964

3 жыл бұрын

Ya me too. I just need a bigger battery and a Anderson connection plug. I would like to see a ham build a box but only seems like the fishing guys have it.

@joerowland7350

2 жыл бұрын

@@brianmartin7964look up hamo can Ham have built them for year I use a biger battery Anderson power poles n a set of binder that use banana plugs in along ever thing he used but the fish finer plug but wire in series not parallel N use a hole saw to drill the holes N run it in reverse n a bit slower The hole be cleaner I built a anttna for 20m that set in my kayak i work hf out on the water n i got extra hach for front bulk head so i coud mount a soler panel 73 n good dx n9prf JOE

I never use those cheap lawnmower battery charger connectors. XT60, gold plated, rated at 60 amps, is my standard for inline connectors. Also, replace (dangerous) cigar lighter plugs/sockets with DIN standard fittings.

How long do you get out of a charge I’m looking to run led boat lighting phone charger off of it

Hello,…. Can a lithium 12v 8ah battery be used for a 30amp trolling motor?

Looks great, but how do you charge it back up? Do I need special charger or can I just plug it into a USB cable? What about water proofing it?

@TheSpeedofTim

3 жыл бұрын

I just use the charger that came with the battery. I wired it to another saw connector so I just just plug it in when I get home. I haven't tried making it fully waterproof. I keep this in the hull of my kayak while out and it has never gotten wet, so don't have many concerns. The biggest thing your have to figure out is waterproof connectors and implements. Best of luck!

I built a similar box, a little bigger more power, more lights, more stuff in general, added solar, the whole nine, was wondering do you like the inline blade fuse holder or the inline round fuse holder better? Which has held up the best? Any differences you have found between the two? thanks, cool video.

@rs4425

4 ай бұрын

pictures?

Great video! I too have a Garmin Striker and am looking to do something very similar. Question - when charging the battery, did you attach an SAE connector to your charger so you can plug it into the sidewall port you installed? That’d be a big improvement over my current method of alligator clips (and messing with the female disconnects which always come undone). Thanks again!

@TheSpeedofTim

3 жыл бұрын

That's exactly what I do. I purchased a set of two to make things super easy on me. The clips and exposed connections just made me too nervous.

@race_addict

Жыл бұрын

@@TheSpeedofTim This was the exact question I came into the Comments to ask... charging input through the SAE output. Cheers.

How would one add a way to charge this via usb-c?

How are you going to charge the battery?

How do you charge the battery?

Should've added a fuse block for later acc.

Man that's is a nice battery box. I really need one of those for my kayak. Just trying to find the time to grab everything And put it together. After everything all set and done How much do you think you have invested in the battery box? I would like to do the same thing for my kayak. Great video man thank you for sharing.

@TheSpeedofTim

3 жыл бұрын

Just off the top of my head, probably around $50 or so. I'd like to make another one before too long with some enhancements. I like the box as I use it as a general camping battery, helping to keep all things charged when out for the weekend.

@mackjenkins7721

3 жыл бұрын

@@TheSpeedofTim Okay that's not bad that's pretty cheap. I need to try to find those accessories and the box so I can build me one for When I out fishing and kayak camping.

@TheSpeedofTim

3 жыл бұрын

I found a lot of the switches and such on Ebay. They were in a bundle, usually arranged on a plastic plate next to each other. I just popped them out of that plate and put them where I wanted. This is the one I purchased: www.ebay.com/itm/Dual-USB-Port-Marine-Boat-Car-RV-Voltmeter-12V-Socket-4-Hole-Panel-Switch-Kit-US/383287630051?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649

What is the name of the wiring component you first installed and what is the gauge of the wires used?

@TheSpeedofTim

3 жыл бұрын

It's an SAE power plug, and I used 16 gauge wire I had around the house. Here's the SAE plug I used: www.amazon.com/gp/product/B07V6NJ37P/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1

Add like a bigger battery 👍

@TheSpeedofTim

2 жыл бұрын

Yeah, definitely need to do that this next season.

@Matthew07080

2 жыл бұрын

@@TheSpeedofTim good content through , I'm new to the channel 🤝

@TheSpeedofTim

2 жыл бұрын

Thanks my friend. I need to get back at it soon. Last year was ROUGH

Do you need ventilation for the battery to prevent overheating?

@TheSpeedofTim

2 жыл бұрын

I haven't run into any overheating issues, even with this in the box and in the sealed hull of my kayak on hit days. May be different if it's bigger and with more electric draw

@AW-Services

Жыл бұрын

No as it's a sealed lead acid. Doesn't vent and if it gets warm under charge it won't affect anything

Very cool, but why not go with a lithium iron-phosphate battery? A lot more power for the size/weight and a much longer service life.

@TheSpeedofTim

2 жыл бұрын

Mostly just cost and availability. Would love to do another build with a more powerful, longer lasting battery.

@jasonbroom7147

2 жыл бұрын

@@TheSpeedofTim - The LiFePO4 batteries cost more, up front, but you really get what you pay for, especially in an application like this.

@TheSpeedofTim

2 жыл бұрын

Nice. I'll take a look for my next build. Thanks for the tip.

Could you provide a list of all materials and tools required for this project.

@pewpewlife8210

3 жыл бұрын

I know I want to know what part is that

@TheSpeedofTim

3 жыл бұрын

Sure - I added the below to the description as well: Parts list: Dual USB Port Marine Boat Car RV Voltmeter 12V Socket 4 Hole Panel Switch Kit US: www.ebay.com/itm/Dual-USB-Port-Marine-Boat-Car-RV-Voltmeter-12V-Socket-4-Hole-Panel-Switch-Kit-US/383287630051?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649 SAE Power Socket: www.amazon.com/gp/product/B07V6NJ37P/ref=ppx_yo_dt_b_asin_title_o01_s01?ie=UTF8&psc=1 Academy Sports Ammo Box: www.academy.com/shop/pdp/academy-sports--outdoors%E2%84%A2-field-ammo-box#repChildCatid=1271964 Cabelas rechargeable battery: www.cabelas.com/shop/en/cabelas-rechargeable-12v-battery 16 Gauge wire Insulate Terminals (mine came with the voltmeter and switch linked above) Tools Used: Dremel, hand drill, wire crimps A step bit would have been better for the holes, if you have one handy (or want to pick one up). Hope that helps!

Can you run the whole thing all at the same time

@TheSpeedofTim

2 жыл бұрын

Yeah, I'm able to run them all at the same time. I don't do it often though. Would likely need to upgrade the battery, or add a second battery if doing that regularly.

Perfect setup. How did you wire the SAE end to your Garmin connector?

@TheSpeedofTim

3 жыл бұрын

Good question. The power cables for the Garmin we're bare, so I just added a SAE plug to the end of the power cable in my kayak hill. So I just drop the batter in the hull, plug in the power connector, and get to fishing.

What are the dimensions of the box?

Can this be recharged? If so how?

@TheSpeedofTim

2 жыл бұрын

Yep, the battery comes with a simple wall charger you can use. I adjusted it to work with my connectors

May I ask the XT90 connector seat? ?

@TheSpeedofTim

3 жыл бұрын

I'm not sure which part you're referring. I do have the full parts list in the description, which may help.

Does anyone sell USB quick charge units and also USB C chargers for these projects or one to plug into a cigarette lighter plug the old slow USB chargers take too long for the newer devices designed for the USB type C chargers my phone was almost dead so I plugged it in to my sister's built in USB charger for 2 hours while we did some running around and then I headed home a 2 hour drive and it was dead before I got home in all that time plugged into her car it barely got any charge at all it seems strange that most newer vehicles are putting in USB chargers finally but even though USB quick chargers and USB type c have been out for years they haven't added quick charge or type C yet don't see cigarette lighter chargers either

@TheSpeedofTim

2 жыл бұрын

Not that I'm aware of, but that's a cool idea. Please holler of you find one.

@HondaFit4Adventure

2 жыл бұрын

I believe most USB/C ports equipped on cars are mostly for data transfer and not necessarily for charging. For instance, the USB port that's available on my car only supplies .5amps of charging power, while most adapters put out at least 3amps. If you do buy a 12v (Cigarette plug) to usb charger you need to read how many amps the output is. The ones typically sold at gas stations are only .5 amps. Basically useless, especially when running a gps app on your phone. I prefer ANKER. I've tested their portable batteries and they all come with the advertised capacity. All of their charging devices have a high amp out put and come with a warranty. I hope that helps.

How much sir

what gauge wire is being used.

@TheSpeedofTim

3 жыл бұрын

Hey Jai. I just used some 16 gauge wire I had around the house

Sorry to say, the 5 dollar ammo box, is now $15 or more.

Why didn't you use the crimpers on the cutters for all the spade connectors? You know they're called crimpers for a reason 😂

@TheSpeedofTim

3 жыл бұрын

Ha! Yeah, I realized that I didn't quiet do that exactly as normally done. Crimping with the right thing would have been better. This at least worked and all of the connections are still good.

@search_eternal

3 жыл бұрын

I noticed that also and was yelling at the screen. LOL. But looks like it turned out good and works.

@TheSpeedofTim

3 жыл бұрын

Yeah, had to use what I had available. May build another one soon, with the right tools. Works well though!

I heard a lot of chipmunk cursing going on there….

Throw a 12V inverter inside! Opens up a lot of camping and household uses.

you speed up the most interesting part