Just wanted to say THANK YOU! I just did this for my Hobie and it turned out great.

@Aksmaniyak

Жыл бұрын

Glad to help!

Thanks for posting it! I’ll shoot you pics of how I end up setting mine up. Tight lines!

@Aksmaniyak

2 жыл бұрын

Sounds great.

thanks for sharing.

@Aksmaniyak

2 жыл бұрын

You are welcome.

Hi. concise, to the point and easily understandable! (As are all your videos) I am curious? Have you made a video of 2 x motors connected to a common steering link yet? (i.e. turning the steering would turn both motors simultaneously)

@Aksmaniyak

2 жыл бұрын

Thanks! I have never done a tandem motor set up. Honestly, I think it is more of an expensive gimmick than being practical.

@joatmofa0405

2 жыл бұрын

@@Aksmaniyak OK - I was thinking of 2 x 86 lbs thrust motors (24V) to propel a small cathedral hull (or a kayak) as opposed to a noisy outboard - might be slower, but definitely quieter? (Could even mount a 650W solar panel overhead ?)

@Aksmaniyak

2 жыл бұрын

@@joatmofa0405 Personally, if I needed more thrust I would go up in size with one motor. It is much easier to deal with.

Could you install a 55 pound thrust trolling motor on this set up? Or will that tear it off the boat?

awesome build..excatly what i want to do out in tje front. still try to figure out a way to raise and lower the motor with out of getting out of the seat.

@Aksmaniyak

Жыл бұрын

Thanks Michael. I have an Impact Resistance and Cable Lift System video tutorial that may work for you.

@mulder5118

Жыл бұрын

@@Aksmaniyak ok thanks a million

@Aksmaniyak

Жыл бұрын

@@mulder5118 Glad to help!

@mulder5118

Жыл бұрын

​@@Aksmaniyak anyway can send the link...can't find I for some reason. loving your vids

@Aksmaniyak

Жыл бұрын

@@mulder5118 Here it is. kzread.info/dash/bejne/kWyJj8-PgJXPlLg.html

Ой вей , очень даже интересный у Вас ролик . Имеет право на жизнь и такой способ предложенный Вами . Удобно , снял мотор со стойкой и нет проблем . Только вот еще будут тяги крепления поворотов , если не изменяет память Старому солдату - они у Вас крепятся на карабинах , к педальному управлению . Вы не усложняете данное действие электронным управлением ! Чем проще система - тем она надежней и долговечней . Спасибо за Ваш труд и то что делитесь с народом !!! Честь имею - МИхалыч

@Aksmaniyak

Жыл бұрын

Thank you Mikhalych!

@user-hc6cw5by5g

Жыл бұрын

@@Aksmaniyak Пожалуйста Уважаемый , жаль не ведаю как Вас звать - величать по имени и отцу батюшке ( то есть по отчеству ) . Удачи Вам и здравия !!! Честь имею - Михалыч

I’m looking to put a e propulsion motor on my ascend 12t. I need the transom mount to extend up though because the shaft on the e propulsion is permanent and I believe the extra short shaft would still be too long. Any thoughts about a product out there that might fit or a way to build something?

@Aksmaniyak

8 ай бұрын

I think a custom build would be the best for you. I have never used that motor so I can't provide any details. Good luck!

How did you put the screw holes in the kayak to screw the bolts in

@Aksmaniyak

3 күн бұрын

I used snaptoggle bolts.

How did you find the pin? The main quick release one. Im stuck on that step.

@Aksmaniyak

Күн бұрын

Follow the related video link.

What Trolling Motor are you using? And how did You wire it up to control it?

@Aksmaniyak

Жыл бұрын

It is a Minn Kota 12V 30lber. I have other 12T videos in a playlist on this channel to answer your questions.

Where did you get the cross pin and cotter pin for it?

@Aksmaniyak

Жыл бұрын

It's listed in the related video narrative.

@truecrimson1

Жыл бұрын

@@Aksmaniyak thank you. Working on my motor install slowly but steadily. Taken a lot of ideas from your videos.

@Aksmaniyak

Жыл бұрын

@@truecrimson1 Glad to help!

How’s the steering?

@Aksmaniyak

Жыл бұрын

Very responsive. You can see the performance in the shakedown cruise video.

𝔭𝔯𝔬𝔪𝔬𝔰𝔪