No video
DIY Acrylic Bluetooth Speaker 20w
• 20w Acrylic Bluetooth ...
Bluetooth Speaker
Money back guarantee pag di aabot ng 4 days straight walang patayan na tugtugan ang isang full charge 😂😂😂😂😂
Box Dimensions: 10cm×9cm×21cm
shopee.ph/product/59713027/13...
Update:
Battery life testing...
5th day na ngayon 80% battery na lang (brand new 18,000mAh/18Ah version)...
8hrs everyday na tugtugan at full volume...
Final product po ay brandnew lahat ng battery...
Capacity test and internal resistance test results ay nakasulat sa bawat 18650 cells...
9Ah, 18Ah at 36Ah versions...
shopee.ph/product/59713027/13...
Пікірлер: 30
Super cool 😎
I'm having Bobby Gately build me an acrylic box like this for 2 -12"s
@AriesThrottle
Жыл бұрын
I'm just a low budget builder, can't afford that thick acrylic 😅😅😅
@psementalist
Жыл бұрын
@Aries Throttle Like the Rock Band Kiss says You want the best you got the best
@rayankhan8308
Жыл бұрын
Same i order mine don't buy them from stores
@psementalist
Жыл бұрын
@rayan Khan i bought a extreme box fron Best Buy once it was okay but it was wasn't good enough for me
😂 cut nanga umpisa de pa natpos palpak 🤣🤣
@AriesThrottle
Ай бұрын
Palpak ba? ok lang po yan sir, basta di magkahiwalay mga ngipin 😊😊😊 Yan ang palpak pagkagawa 🤭🤭🤭
This is amazing by any chance can I get the blueprints so I can make one for myself I love it I would love to do this in a larger scale like home stereo speakers
@AriesThrottle
Жыл бұрын
I'm sorry, actually I didn't plan this one and the bluetooth speaker board/system was from an old bluetooth speaker I just add more battery for bigger battery capacity and a cheap RGB connected to a led controller then directly to the battery with two TP4056 boards so I can use two chargers at the same time for faster charging... I also can't give the dimensions because I already sold it 😅😅😅 I'm still learning about content creation that's why my videos lack some details, I'm really sorry 😔😔😔
"yun ma intro ko 😂😂😂😂/ That's my intro 😂😂😂😂" 🥶🥶🥶🥶🥶🥶🥶🥶
Good but use star far speakers ☺️
Con que pegastes la laminas de acrílico
@AriesThrottle
Жыл бұрын
I used "acrylic cement", it is like a very thin solvent for acrylic, you can buy it in the store where you bought your acrylic glass😊😊😊then I added sealant(white), for additional air tight seal...
Sukses selalu Bang
at 6:50 did you make it with a 3d printer?
@AriesThrottle
Жыл бұрын
Yes, I use ender 3 v2... 😊😊😊
lokasi mana om
Berapa harga nya biar saya beli bang
@AriesThrottle
Жыл бұрын
Php2000, but I'm here in the Philippines,...
Saan mabibili Yan sir plastic board
@AriesThrottle
Жыл бұрын
Yung box po ba? Acrylic glass lang po yan sir sa shopee, tulad nung mga ginagawa nilang pang cover ng plate number...
@jfssound7916
Жыл бұрын
@@AriesThrottle marami Pala sa shopee at Lazada sir
@AriesThrottle
Жыл бұрын
@@jfssound7916 opo, sa shopee ako umorder then ako na nag cut at butas, di ko ata napakita dyan sa video yung pag cut at butas... Watch nyo po yung video ng 200W version ko, may clip ata dun pano pag cut, butas at paglalagay ng pandikit nya...
@jfssound7916
Жыл бұрын
@@AriesThrottle Anong name ng seller ka nakabili pre
@AriesThrottle
Жыл бұрын
"Theacrylicshop" name ng seller kaso lang nakita ko ngayon, active 18 weeks ago...
U Don't now how to make nup
@AriesThrottle
Жыл бұрын
I'm sorry, what's a nup?
😅😅😅 0:14