I never knew about the 5 lug drum conversion until now thanks

Awesome thanks buddy. That's what I was thinking.

Nice informative video! I’d recommend swapping out the studs for extended studs to make up for the shortage

I would like to say nice cars reference I busted out the second I heard it

Try using a Mazda 626 axle nut. Here's the part number: 1988-2002 Mazda 626 Axle Nut - EMPI W0133-1641903

Dude that Ka Chow killed me😂😂😂

You never mentioned in your video what spindle and drum you used for this swap?

Dude, I can't believe you saw how far off the depth was for that hub and you didn't stop after seeing that the brake shoes are now going to be spreading way off center. And throwing that washer away is a bad idea. That's a very thick washer for a reason; it's holding a lot of torque on that hub. I'd venture to say the surface area of the face on that nut is probably half of that washer. Given that (I'm no engineer though)I think the force on the face of that nut may be X to the power of 2. If it were me, I probably would've tried to figure out what other Honda hub might fit, maybe even see if you could take off that ABS ring and shave off about 15mm off of the face of that Prelude hub. That would suck it right in and possibly be in a better location.

@winstonbuzon

5 жыл бұрын

Duly noted. That's why I've decided to remove this hub and find myself a better option while retaining the drums

Thank you,have a 90 coupe ex an love it,needs a lot of love but step by step an watching with good voiceover/tutorial makes me confident an happy to do it.

It kind of looked like the center bore of the drum needs to be a tad bit bigger in order for it to sit flush, it’s not a good/safe idea to run it like that since the hub won’t make it through the hole in the wheel and potentially loosening up while driving

Nice video bossing.. How about the disc conversion... Have you got any plans on doing it? Have a good day chuef

actually converting my cd5 to 5 lug here soon once my parts get here

@havanbarnes

4 жыл бұрын

did you ever do that?

@juice2392

4 жыл бұрын

Havan Barnes yes i did actually. use acura rsx rear rotors & prelude hubs for the disc conversion, if you have drum i believe you can still use the prelude hub with the crv drum cover. and for the fronts use the first gen honda odyssey front knuckle. I know you can use the 6th gen v6 accord knuckle but i’m not really sure what you use. Follow me on IG @1017juixe_ and I’ll send you some screenshots of the parts list i used

Cb7 Squad

Any update on this setup? How is it since then. Was thinking of doing the same setup on my lx. But with ARP extended studs and maybe try to find a little bigger drum to cover that gap.

@winstonbuzon

4 жыл бұрын

I've decided to go with SE rear discs instead. Piecing together is a pain in the ass

Looks awesome man. Great job! Where did you get the 5 lug drum?also how do you like your front brakes? I bet you can stop on a dime now!

@winstonbuzon

6 жыл бұрын

Eric Losh 1997 to 2001 Honda CRV

@keyc131

6 жыл бұрын

Hey Winston what ecu you use for the h23a blue top.

@winstonbuzon

6 жыл бұрын

Ramon Bermudez PCB ECU with obd1 to obd2a jumper harness

@keyc131

6 жыл бұрын

Cool thanks bro. Keep up the good work. Cb7 are the best.

@winstonbuzon

6 жыл бұрын

Ramon Bermudez thank you, and thank you for taking time to view my vids :)

I was wondering if the rear disc brakes from ah 2000 Honda Accord would fit on my 90 cb7 or if I convert the back with the ex disc brakes from another cb7 and then put the hub that you used here

@winstonbuzon

5 жыл бұрын

I got the rear disc setup from a donor 92 93 EX, but I dunno about the 00 Accord setup because I haven't tried

For those that want to do a 5 lug disc the needed parts are below. 90-97 accord 4 lug rear knuckle assembly. 97 rear prelude hub. 97-2001 Integra type r rear rotor (5 lug). Every bolt.

@cuevasedward

5 жыл бұрын

AJ Imports do I need to get the rear trailing arm and spindal off a Accord with rear disc or do I just need the spindal

When we going to see the wheels? Can't wait! Lol

@winstonbuzon

5 жыл бұрын

Coming this month, so stay tuned! :D

@bj-vc5gp

4 жыл бұрын

Is the accord hub bigger than the civics,how can I do the same to my civic bro?

Nice how it went..I have a 92 Honda Accord wagon want to tho a 5 lug conversion it also haves drums like to know what up date have u done anything different from this video getting the nut closer..

@leroyharrison4048

5 жыл бұрын

Man I have the same car lol keep me posted

@johnbeckparadizo8171

3 жыл бұрын

The wagon rear hub bolt is a bit bigger that one from a coupe/sedan

I have a 92 Honda wagon just did the conversion but the axle nut haves more tread to go but only get far enough

@winstonbuzon

5 жыл бұрын

Use Mazda 626 Axle Nuts instead

A have a accord wagon but i have rotos in the rear what parts i need for convert 5 lugs please help thanks

@winstonbuzon

6 жыл бұрын

ricardo ramos click on this link: www.cb7tuner.com/vbb/showthread.php?t=16241

Nice. What did you put in the front ??? Also from the prelude ??

@winstonbuzon

3 жыл бұрын

Used front knuckles from 2000 Accord V6

@JoseRodriguez-ss5xz

3 жыл бұрын

@@winstonbuzon ok thx so much for your help

I got a question can I just buy the 2000 v6 model hub and bearing 5 lug and use the 2000 Honda CR-V 5 lug drum

@winstonbuzon

4 жыл бұрын

That's a really good question, but I couldn't tell you because I haven't tried...

Why did you “notch” the axel nut/spindle? Shouldn’t there just be a cotter pin thru both to secure it?

@winstonbuzon

3 жыл бұрын

No, you have to notch it. Otherwise, it may come off

Did you ever try the crv hubs?

@winstonbuzon

4 жыл бұрын

No, didnt stay on long enough

Would this work with all 6th gen accords that are 4 lug 4 cylinder

@winstonbuzon

3 жыл бұрын

Sorry, but I wouldn't know for sure

This looks waaaayy easier than the rear disk 5lug swap lol

@winstonbuzon

6 жыл бұрын

Christopher Elrod Lmao, tell about it!

@christopherelrod8788

6 жыл бұрын

Winston Buzon I was gunna have to get sooo many parts. Rear ebrake cables the trailing arns calipers disks rotors and new hubs as well. That's just off the top of my head lol

@winstonbuzon

6 жыл бұрын

Christopher Elrod Yeah, that's too much! :D

Where did you get the rear 5 lug hub

@winstonbuzon

5 жыл бұрын

Any local auto parts store

With that little amount of stud showing you won’t be able to put a rim on that’s no doubt .. unless it’s a steel wheel

Hi I am from the United kingdom and wanted to know did you get the new part from honda? And does it have to be a honda part? .. I have a Renault clio 2001 it's got 4 studs and I want a 5 stud conversion do I have to get a Renault part? Would appreciate a little help Great video

@winstonbuzon

3 жыл бұрын

No, I got it from a website called Partsgeek. I did a review on them because their service & return policies were horrendous. If you're going to go the 5 lug route, I would research forums that specializes in Clios first. Based upon your findings & fellow Clio owners' input, you'll have a better understanding of what your next steps will be

@haroonabdulrauf7024

3 жыл бұрын

Appreciate your reply dood

Really sketchy. But I'm interested on how you managed to figure out all the components to fit.

@winstonbuzon

4 жыл бұрын

I had to research cb7tuner.com over & over again just to do so. Ended up getting a lot done just by asking questions from the various CB7 forums on FB and IG posts

Where you get the rotors and 5 lug kit from

@winstonbuzon

2 жыл бұрын

I got the rotors from RockAuto and lucked out with the rear disc brake setup from a 92-93 EX sedan in the junkyard in San Diego

Could this work with rear disc brakes

@winstonbuzon

5 жыл бұрын

Yes it can

What's up, if i can put this out there, that swap is sketch.... Hear me out, that washer is to keep the bearing and nut separate since the wheel is spinning in the same direction as to loosen the nut. It didn't look like there was enough indentation on the nut to securely keep it locked into place. I just don't want to see you lose a wheel or life for a washer. Keep up the cb love.

@winstonbuzon

6 жыл бұрын

Travis Chupco I've thought about this too, and I see your point. I may have to do a video to shave down the hub's edges to properly seat the drums

@travischupco9904

6 жыл бұрын

Winston Buzon I wonder if you could press out the bearing of the new one and see if you could find one that's not as wide? I think that will give you the extra room to run the washer and get a good notch on the nut.

This seems way easy... how come other people switch out the whole knuckles and all when they do 5 lug conversions? And will this work on my 95 accord? I have disc brakes in the rear and front though since its a eex model

@winstonbuzon

2 жыл бұрын

Since you have rear discs, it should be easier

@righty-tightybuilt548

2 жыл бұрын

@@winstonbuzon so do I have to switch my whole knuckles and assembly or can I do it like this?

@winstonbuzon

2 жыл бұрын

@@righty-tightybuilt548 if you already have rear discs, just do it like I did

@righty-tightybuilt548

2 жыл бұрын

@@winstonbuzon awesome thanks brother. How much where the hubs? And are they off a certain car cr-v?

@winstonbuzon

2 жыл бұрын

@@righty-tightybuilt548 just the 5 lug ones, older gen

Bro, Are the drums from the prelude?

@winstonbuzon

2 жыл бұрын

I think so, I don't remember

can i do this with the hyundai elantra 2004 ?

@winstonbuzon

4 жыл бұрын

I dunno. It might be possible. Hasn't been done yet, so maybe you could be the one to do it first on KZread 👍😁

What bolt pattern before and after

@winstonbuzon

Жыл бұрын

Before was 4x114.3 and After was 5x114.3

Hey my 92 accord doesn’t have a drum in the back it has a lil caliper and a rotor what should I do for a five lug swap??

@winstonbuzon

3 жыл бұрын

Change out your 4 lug hub assembly & disc brakes for 5 lug ones. Retain everything else

@winstonbuzon

3 жыл бұрын

www.cb7tuner.com/vbb5/forum/parts-performance/suspension/127726-wtf-5-lug-ftmfl-ahhhhhhhh/page3

@steviebanales3715

3 жыл бұрын

Thanks bro the info helped👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼

Would this work with oddessey

@winstonbuzon

2 жыл бұрын

The rears yes

What's the update bro pllzzzzzz. I have a 92 accord wagon

@winstonbuzon

5 жыл бұрын

I'm back working in my hometown so more things are now going, so stay tuned! Please SUBSCRIBE today and turn on the NOTIFICATIONS for new videos! :)

@Dman209

4 жыл бұрын

Leroy Harrison still have your wagon?

Hopefully someone sees this but is it the same process for the front?

@tycampbell8327

3 жыл бұрын

Minus the drum

Wiston what hub u used from what car?

@winstonbuzon

5 жыл бұрын

I used Prelude 97 but now I'm having a change of heart and switching to CRV rear hubs. I will make an update video when my new CRV hubs come in

@ricardoramos6881

5 жыл бұрын

@@winstonbuzon Nice thx you brother yes please make the video

The wheel will fall off. The rim needs to sit on the hub for saftey issues. The rim is only being suported by the lugnuts, big no no. It will vibrate at speeds over 50mph.

Would this work for a 1967 mustang?

@winstonbuzon

4 жыл бұрын

Hard to tell...

And so you’re gonna just leave out the washer? Prob won’t be any problem there.....manufacturers are always putting in extra parts. Prob just added like 5-10 hp by leaving it off. Carry on soldier!

Wiston what about front?

@winstonbuzon

6 жыл бұрын

ricardo ramos kzread.info/dash/bejne/fGikwcuLdNCsctY.html

Le quedarán los de un honda 2008

plus the base of the rims there's barely gonna be any rear stud treads poking thru no ? could you have installed extended wheel studs back there ?

@winstonbuzon

4 жыл бұрын

You could. In the end, I changed my rears to rear disc brakes from an SE

What year and model, 4 door or 2 door and submodel was your Accord before doing the conversion?

@winstonbuzon

3 жыл бұрын

91 EX Sedan

Can I do this with my 95 civic

@winstonbuzon

3 жыл бұрын

I'm not sure, but you can using RSX or CTR parts

What kind of 5 lug drunk brake cover are you using?

@winstonbuzon

3 ай бұрын

Brake cover? For the fronts?

@trackshun

3 ай бұрын

@@winstonbuzon no for the rear drunk brake. The other that goes over the hub & ultimately the drum brakes. There’s 5 holes on it, which car is it from?

@winstonbuzon

3 ай бұрын

@@trackshun 93 EX

@trackshun

3 ай бұрын

@@winstonbuzon i don’t recall 93’ accord ex’s with 5 lugs. I’m assuming the drum brake cover is from an odyssey?

@winstonbuzon

3 ай бұрын

@@trackshun so you're looking for 5-lug drums? Then you might look into 1st gen CRVs or Odysseys

Where can I get the kit for my 98 accord

@winstonbuzon

5 жыл бұрын

Kit for...?

@justsoblessed

5 жыл бұрын

The 5 lug swap ?

@winstonbuzon

5 жыл бұрын

@@justsoblessed there's no kit, just the 5 lug conversion from any V6 of the same chassis as yours

@justsoblessed

5 жыл бұрын

Winston Buzon o so basically I can order 5 lug hubs that come from a v6 Honda Accord 6th generation

@winstonbuzon

5 жыл бұрын

@@justsoblessed yes 😁👍

Yo tengo un Honda civic 2001

How do it drive

@winstonbuzon

4 жыл бұрын

Like normal, honestly. I will be posting up a video within a few weeks

Why not used a Mazda 626 rear axle but

@winstonbuzon

5 жыл бұрын

I ended up going to rear discs anyway but good to know

Where you bought?

@winstonbuzon

2 жыл бұрын

Don't buy from Parts geek and here's why... kzread.info/dash/bejne/m5mJqqqPZqW0ipc.html

@billysanchez394

2 жыл бұрын

@@winstonbuzon thank you 😁 and u have another store?

what about the front?

@winstonbuzon

2 жыл бұрын

kzread.info/dash/bejne/fGikwcuLdNCsctY.html

did you solve your problem?

@winstonbuzon

5 жыл бұрын

Yes I did. RSX brake rotors

@daniellucero4687

5 жыл бұрын

@@winstonbuzon so you have disc in the back now?

@winstonbuzon

5 жыл бұрын

@@daniellucero4687 yes

What happened to 139 ft⋅lbf An impact wrench on a bearing ... FAIL !

Where u get the 5 lug drum

@winstonbuzon

4 жыл бұрын

Drum? I had discs. But you can get drums from the CRv or Odyssey

@raygraham3848

4 жыл бұрын

I got drum brake like u but I got wheel bearing an the hub

@raygraham3848

4 жыл бұрын

What year crv or odyssey

@winstonbuzon

4 жыл бұрын

@@raygraham3848both first gen

@raygraham3848

4 жыл бұрын

What year

ผมก็ขับรุ่นนี้ปี91 LXI ชุดแต่งบางชิ้นที่ประเทศผมหาไม่ได้แล้ว ผมรู้สึกอิจฉาคุณอย่างมาก ฮ่าฮ่า😂ผมไม่เก่งภาษาอังกฤษ (thai language )

I did it too , but not work

@winstonbuzon

Жыл бұрын

Try cb7tuner.com. Go to the search bar and type "5 lug conversion". It should work. I did the one where I had to use the Mazda 6 hub nut

disc is only easy if you got a ex

I succeeded with Honda S-MX hubs (42200-S70-008) and Mazda nuts. The dimension is nearer than that of Prelude. minkara.carview.co.jp/userid/257050/car/2856104/4895512/photo.aspx minkara.carview.co.jp/userid/257050/car/2856104/5823435/note.aspx

Fucking stupid for leaving the locking washer out god speed brother hope the wheel dont come off at 80 snd kill someone they something that u just dont leave out

Ok, I’m full-on scared. Gotta ask, bro.....How many vehicles have you worked on that are out there driving around on the road, possibly killing folks? There’s like 4 or 5 GLARING safety violations if you actually put the hub together this way. Dude, please, get a professional mechanic to take a look at that setup before you kill somebody. Just because it’s the cheapest and easiest way to get the job done, that shouldn’t convince you to do it that way. Some things can’t be shortcut-ed......like braking systems! Please please please don’t ride around with that hub/drum as it is at the end of your video. No offense man, I really appreciate your videos, but that’s simply not safe, for the driver OR anyone nearby.

@winstonbuzon

3 жыл бұрын

Well, I decided to not go with this hub. I got some proper hubs and am riding safe to this day. The last video seen me drive the CB7 it was perfect, no noises, no problems whatsoever, but I also appreciate your concerns

So in other words you weren't able to get the notch out and you.fucked up your threads.

That’s not work

Not worth it. That is so dangerous. That thick steel KEYED WASHER is there to prevent the spindle nut from coming off if the hub bearing was to lock up. Manufacturers spend millions on training engineers to come up with something that works. Ask yourself this: could they build a car like that and pass d.o.t regulations?

@trackshun

3 ай бұрын

There’s actually a skinnier nut that could be utilized. It’s a mazda axle nut. It is thinner. Also, you can just buy extended lugs.