Lie. There is no way that produces 400KV. Not even 40KV. 10KV, maybe 5KV, more probably.

@enrique1305

4 ай бұрын

Ey dude, can you explain me why it can't produce 400kV of energy? I'm quite new to electric theory so could you explain me this to me please?

@timhofstetter5654

4 ай бұрын

@@enrique1305 Because 1KV will leap a spark gap 1mm wide and 10KV will leap a spark gap 10mm wide and 100KV will leap a spark gap 100mm wide and 400KV will leap a spark gap 400mm wide and the secondary of that tiny transformer isn't 400mm wide so 400KV .would just leap across the transformer internally, causing a short circuit and destroying the transformer. The transformer isn't even 40mm wide, and the secondary wires aren't kept 40mm apart so even 40KV would arc inside this "taser" thing and destroy the batteries. Remember, a leaping arc can use random metal objects as "stepping stones", so the only gaps it really needs to leap in this case are wire-to-battery and battery-to-battery. That's a very short gap... and it doesn't leap there so the voltage cannot possibly be very high. In a 400KV system, you need to keep everything in the secondary path at least 400mm apart and prevent any metal between the secondary wires or you'll get arcing where you don't want it. In addition, you really need corona ribs everywhere to prevent electrical short paths through dust and oils on surfaces. Every automotive ignition system has corona ribs like that everywhere, and automotive ignition systems use only 20KV to 40KV. The spark gap shown at 3:04 is only about 5mm wide, which tells me that this little transformer probably prodoces a real-world secondary voltage of about 5KV with a 6V input... a mere 1:833 winding ratio.

@timhofstetter5654

4 ай бұрын

@@enrique1305 Also... please read Anthony Garofalo's 1-star review; he actually measured the output voltage at 10KV.

@Trainingtofailure

4 ай бұрын

​@@timhofstetter5654but why did it create plasma and lot of air when I connected 4 super heavy duty camelion batteries

@Trainingtofailure

4 ай бұрын

​@@timhofstetter5654 I measured the distance and it created plasma within 1 cm gap

Which capacitor you've used?

spot. Great content my man

what determines the distance between the prongs how would you increase the distance

Thank you very much this is a great defender

Thx so much I’ve been wanting to make decently powerful arcs forforever

Thank you man for sharing this stuff

@DaSlotho

Жыл бұрын

heres mine that i made kzread.info/dash/bejne/aGugm66Pk6y3aZM.html

great tutorial couldnt belive it worked ty

@samkoaugust

Ай бұрын

muss man die roten drähte verbinden ?

how to make taser: step one: buy taser. step two: connect battery congratulations

@XenyQ_OFF

22 күн бұрын

@@stalnos3581 the module is alot cheaper than regular taser. In my country. I made a homemade taser for just 1.2 dollars. If I buy a taser. I spend 10 - 15 dollar cheapest.

@burntt999

18 күн бұрын

lol hahahaha right!? I’m just looking at the link on amazon too thinking the same thing.

@burntt999

18 күн бұрын

@@XenyQ_OFFthat doesn’t make the title of the video any less false. Edit: changing words.

@XenyQ_OFF

18 күн бұрын

@@burntt999 it would be very complicated to wind a high voltage transformer yourself. And it can't be homemade if you need to buy transistors. Capacitors. And such.

@Slizzer465

21 сағат бұрын

How did the guy you bought it from make it though

Very good brother😁

Hi, at 2:43, can you explain to me where these black wires come from that need to be soldered to the button? Are these the wires that “come out” of the batteries? Thanks.

@creativecore2887

6 ай бұрын

yes, these wires are the negative wires coming out of the battery packs

How many ohms is that resistor, thank you

What if u connect 4 of those H.V.G’s together ?

Good and wonderful work. I wish you success in your careers. Thank you for this beautiful dimension

@DaSlotho

Жыл бұрын

heres a Bigger n better one kzread.info/dash/bejne/aGugm66Pk6y3aZM.html

No jeje, osea que elementos se usaron hno??

What called that black connector?

will two 3.7v battery's work pleas reply

Soft working!

What is the piece you put on the battery pack is it just to be a handle

@Bryan.schetz

6 ай бұрын

No, that increases the voltage of the batteries, it is a taser module, the link is in the video description, it takes 3 to 6 volts and 2 amps for the module to work correctly

Where i cand find that voltage module?in toys i cand find?

Great video ! Question for you, I have just bought 2 Chinese 908 series tasers from Wish and they both don't discharge. The flash lights work but not the tasers. Any ideas ? Appreciate it ! 🙂

@creativecore2887

Жыл бұрын

I'm definitely not the person you'd want to ask about this because I don't know a lot about circuitry and stuff like that. id guess that you just got faulty ones because they're from wish. do they make a whining noise when you try to activate them?

@TheHeat55

Жыл бұрын

@@creativecore2887 Yes, they do !! ??

@creativecore2887

Жыл бұрын

@@TheHeat55 I believe the terminals may be too far apart, so the module can't make enough voltage to arc across. A larger gap will make louder, but less arcs, which means lower frequency. If the module can't make the arc, I believe it will start arcing internally. Because all the components within the module are close together, the arcs happen more frequently so you get a whining sound. I'm not sure exactly what's causing it, but that's my best guess

@creativecore2887

Жыл бұрын

@@TheHeat55 try using a spoon to touch one of the prongs and move the spoon closer to the other one. Maybe The taser needs a closer gap

@TheHeat55

Жыл бұрын

@@creativecore2887 Thank's a million CC ! I have 3 of these tasers, they all worked for a day. The seller wrote that you had to charge them for 10 hrs before they were first used. They all have the same little wire for charging, I'm wondering if it's not a charging problem. Were they over-charged ? The charging light doesn't turn green when fully charged. Anyway I'll try the spoon thing CC. Thank's again for the detailed help 🙂

Works 100% nice one

@DaSlotho

Жыл бұрын

heres mine that i made kzread.info/dash/bejne/aGugm66Pk6y3aZM.html

@metalmedic32

Жыл бұрын

@@DaSlotho kzread.infod1FQX7OPs-g?feature=share nice I did this with mine haha

what was the cylindrical black thing that u connected with the batteries

@Ninetalesbeyayenasky

Жыл бұрын

That's called a tranformer

good very good idea dene ke liye

Superb

What is the black thing you put on top of the battery packs

@monkey_scare

3 ай бұрын

voltage booster

New coil plug for my bike😃👍

what is the black box u have used there? i really need to know!

@HASSAAN_FF

19 күн бұрын

Connector❤

When I wire the 2 black wire to the button it goes off instantly, I have the 4 leg button. What do I do?

@creativecore2887

Жыл бұрын

i belive you have to connect the wires to the legs on the same side

@creativecore2887

Жыл бұрын

courses.ideate.cmu.edu/99-355/s2022/images/tactile_switch_wiring.jpg

@bobbyjheyhey9575

Жыл бұрын

Connect all your wires and switches and what not together first, then remember proper plyers they ground you and yeah. Always positive first I was told. As with no ground or negative there's no current atm until you connect ALl of the wires. Aka the negative last ground is so device doesn't become scary and have a pulsating current going to through the devices you decide to Amp up your use and use more power. It'll help you respect electricity and not be a dumb ass or a pussy....

@johntimlin6664

Жыл бұрын

Both black wires on one side of switch / grn on opposite side of switch ( make sure wires are not touching ea. Other or u will have direct contact which will bypass the switch.

@josephmobbs6600

Жыл бұрын

Its opposite side output btw

What u using

Creative video, thanks :)

Cuáles son los materiales?

Nice

Is there a safe why to measure the voltage on this? My multimeter caps at 600v

@creativecore2887

8 ай бұрын

i got no clue, sorry

What is that black thing on top

Can you use hot glue to connect the cables instead of soldering?

@creativecore2887

4 ай бұрын

Not recommended

Que componente eletronico você colocou com a pilha ? e qual o valor ?

@creativecore2887

2 жыл бұрын

Todas as peças usadas estão na descrição

@RayceVR

Жыл бұрын

@@creativecore2887 no they are not

@creativecore2887

Жыл бұрын

@@RayceVR this is the description of the video -------------------------------------------------- In this video, I will show you how to build a powerful taser at home with simple parts, all for under $20! -------------------------------------------------- Materials Used Taser Module: Tactile Buttons: Battery Holders: Soldering Iron Kit: Hot glue gun Tape Two small nails x4 AA Batteries -------------------------------------------------- If you enjoyed this video, feel free to leave a Like and Subscribe for more content like this! You can also leave a Comment if you have any suggestions for making my videos better! --------------------------------------------------

Great sharing

how would one control output ??..... example if this was a survival hunting device with probes and wires on a forked spear such as for use after netting an animal ... in order to subdue it.. Obviously you would subdue squirrel at lower voltage you would say a wild pig so you need some way to modify the output...

@creativecore2887

8 ай бұрын

get a resistor for the battery or a voltave control knob.

Thank you for this currently going to school and there is alot of kidnapping in the Philippines and i needed this🙏🙏🙏

@creativecore2887

Жыл бұрын

just don't bring it if its against school policy

@JeniviveBersabal

Жыл бұрын

me 2 im in philipines

@wasabipaste672

Жыл бұрын

me 3, this is very useful

@Lee.Davis_onesandzeros

Жыл бұрын

Me 4

@KaempferIndustries

Жыл бұрын

me five👍👍

El rectángulo negro de lo último que es??

Can you also use normal on-off switch or does it have to be tacticale buttons

@MilkBugs

7 ай бұрын

any switch my friend. on/off toggle, Decore,.. lol push button. i believe this module will shut off after 20 sec

@flgbtandfukbts2977

6 ай бұрын

​@@MilkBugswhy will it shut off?

@Bryan.schetz

6 ай бұрын

They will download, but it won't be as fast as he said

explenation on the components please. I dont know what the cilinder is

@XenyQ_OFF

2 ай бұрын

You buy it 300kv stun gun module it cheaper than premade stun gun

C quoi le truc au dessus merci bien à vous et français super merchi

What is the black thing on top of the batteries?

@Bryan.schetz

6 ай бұрын

É um módulo de taser está o link de compra na descrição

What’s the black thing?

Good 👍👍👍👍👍

Y si tengo una caja de cuatro pilas funciona

Tysm it helped me alot cuz one of my friends is beating me up at my college so i stunned him and it work 😊 tysm

What’s the name of the black thing with the green wire …. That the button was placed on

@creativecore2887

2 жыл бұрын

a taser module

@RayceVR

Жыл бұрын

@@creativecore2887 6v?

@tahmidhossain8144

Жыл бұрын

It’s a boost converter

@hasanwh8610

Жыл бұрын

capasitor 6v to 400kv

ice its actually working, im suprised

它的电流是多少啊？

What is it or the name of the piece that you put on top of the batteries

@SuckySuckMyBalls

Жыл бұрын

I was wondering the same

I directly connected the volt booster to a two 1.5v Double AA battery to test it, it work but in the 2nd attempt, it didn't and it seems that it doesn't have a continuity when i test it with multimeter. Can someone explain to me what just happened? Is it possible to fix it?

@creativecore2887

6 ай бұрын

I honestly don't know what could've caused it to fail, but these taser modules are very cheaply made and very finicky so it probably just died. I would recommend using 5-6v though which would be 4 AA batteries.

@jimboynuer5898

6 ай бұрын

​@@creativecore2887so using an inadequate input voltage such as 3v would likely broke it? And probably because it was "made in china". 😂 But does your teaser module still working with 5~6v batteries? If does maybe I'll try that if I ever salvage one in the Garage.

what did you put on the front of the battery packs?

@caseyoveracker26

Жыл бұрын

I was wondering the same thing

@creativecore2887

Жыл бұрын

the taser module

What’s the brick black thing on top of the battery’s 😅

@creativecore2887

Жыл бұрын

taser module

ABOVE THE BATTERIES, GOES A BLACK TUBE GLUE WITH SILICONE AND ABOVE IT HAS THE TWO PINS WHERE THE VOLTAIC ARC IS FORMED... WHAT IS THAT CYLINDER???

@creativecore2887

Жыл бұрын

taser module

Very professional work, Thanks my friend ❤️❤️❤️👌👌

@fatnafifi1227

2 жыл бұрын

ثثج٨غنلنيمامةتغتبعي٩٧٤٩بع٧قبابعلغذوفب٧قتقلنهف٩ي٦دخفيقخيغلت٩٦قفنكعقحف٧حق٧فعحلغخخف

@hadiyyatm967

2 жыл бұрын

skema nya Mr rangkaiannya bagamana

@antoniosimoes9178

Жыл бұрын

lol

hey , i have a switch with 4 legs. how do i solder that?

@user-cc3yu2ti9n

3 ай бұрын

你这头像有点。。。。

Guys ive a question what to do with the red cables pls write me😊

What was that in the frant

ano po yang black na pinatong?

Lista de material , o somos adivinos

Will it work if i put 2 batteries instead of 4 batteries

@creativecore2887

Жыл бұрын

Probably, but just either weaker arcs, or less of them

Did you put all the red wires together?

@user-wq3nw8wt4w

23 күн бұрын

yes to connect batteries to transformer

I have a question when I build can I cover the whole thing with black electrical tape and leave the button out only and do you have to use the soldering iron?

@SuckySuckMyBalls

Жыл бұрын

You can actually just tape wires to the batteries, no plastic needed and then cover the whole thing in electrical tape if you want to. You wouldn't even need actual wire and the springs from lighters and pens would also work as wire of covered with electrical tape

@SuckySuckMyBalls

Жыл бұрын

And soldering iron is not needed, you can melt tin with a lighter and a nail. You can also just tape the wire with electrical tape if needed but be careful, it should connect but it won't be as powerful. Also it might cause a fire if not done properly so it has to connect

@SXModez

Жыл бұрын

@@SuckySuckMyBalls I did it with electrical tape I followed the instructions sadly it didn’t work

how much is dangearous?

Where did the high eletricity came from

im a bit confused so we dont need that red wire?

@winnitooo

Жыл бұрын

you need to connect the 2 red wires so the battery connects to the transformator thing

nice

WHAT IS INSIDE DE BLACK TUBE? IT IS A COIL OR ELECTRONICS TRANSISTORS...

@nedlikebruh

Жыл бұрын

look in the description

what is that black thing you brang in at 1.30

@creativecore2887

Жыл бұрын

taser module

Great video I showed it to my dad and he said it was a good but the solder job was absolutely horrible

@vintopin

Жыл бұрын

What soldering? 99% of the time he used hotglue

@johnbeitz

Жыл бұрын

You either solder or use hot glue

Sweet

Bao tiên môt cái vây

The taser goes on as soon as i put in the batteries and the button doesn't work? how do you fix that

@creativecore2887

Жыл бұрын

does it turn off when you press it?

@SSL22222

Жыл бұрын

@@creativecore2887 i've fixed the problem, the button has 4 legs, and i connected two leg on each wire, when you're only supposed to connect one on each

@mechoman8443

Жыл бұрын

@@SSL22222 when I connect the button it goes off straight away?

Cool

WOW❤

Where can I buy an electrical transformer?

@Bryan.schetz

6 ай бұрын

What is used in the video is in the description

Fainy wynalazek

@creativecore2887

10 ай бұрын

im not sure what that means but thank you

Why would you at the battery in paralel instead of series, even though the module you used is used made for 6v. this way you have 3v with a longer battery life.

@andreascolari8493

3 ай бұрын

I don’t get it can you explain it to me

@desktopantec2290

3 ай бұрын

@@andreascolari8493 the batteries are in parallel, this means that the voltage is not stacked. If you have 4 battery and you connect them in series the voltage adds up so you get 6 volt because 1.5v * 4(batteries) = 6v. The configuration in the video has 2 batteries in series (so 3v) and the other two also in series, however the two pares are in parallel so instead of adding 3v to 3v to make 6v they keep the voltage low while providing a higher current. The device is rated for 6v so it is better to use 6v instead of 3v

Atas batu mesen bekas apa

would u recommend using a 9v battery?

@creativecore2887

Жыл бұрын

a 9v battery works but isn't recommended because most taser modules are only rated for 6 volts. You could throw on another AA battery and it would probably be fine.

bro i am not getting any tracks into my soft how is that possible

@creativecore2887

Жыл бұрын

what?

وين تجي لبيسا هدي

How does one get a 'taser model'

@creativecore2887

Жыл бұрын

you can get them online

This taser is uhm very much lethal...

Why wouldn't you use a 9 volt ?

@creativecore2887

2 жыл бұрын

the taser module is rated for 3-6 volts

Does it work whit a seesaw button? Yes or no?

@user-ec1ek9gj2l

Ай бұрын

Can a nyone tell me?

@creativecore2887

Ай бұрын

it would but if you drop it it will stay on instead of automatically shutting off

@user-ec1ek9gj2l

Ай бұрын

Thanks

Any way I could get a list of items used?

@creativecore2887

Жыл бұрын

the description got messed up, the links should be there now

Can this electric gun make someone faint?

Where do u get the taser module from??

@godgajet6763

Жыл бұрын

its high voltage convertor

@creativecore2887

Жыл бұрын

amzom

Want is this black?

What is the name of that black piece?

@Monkeyaregoats

3 ай бұрын

What is it called

How much

What is that round black thing 1:30

@creativecore2887

Жыл бұрын

Taser module

is this lethal????? is it safe?!?!?

Nice amijing

Is bhai reply jarur Dena kya aisi gun banakar bhej sakte ho

@creativecore2887

2 жыл бұрын

मेल में पसंद है? mel mein pasand hai?

What is the name of the button

@creativecore2887

2 жыл бұрын

momentary tactile button www.amazon.com/QTEATAK-Momentary-Tactile-Button-Switch/dp/B07VSNN9S2/ref=sr_1_4?crid=2KOMLUI55U0F1&keywords=tactile+button&qid=1655408229&sprefix=tactile+but%2Caps%2C774&sr=8-4