Justin, my first visit to BBW. Very impressed with your calm, easy to follow descriptions. Your commentary and critiques provided guidance that was easily digested. I’ll be back…

@BitnerBuilt

2 ай бұрын

oh that's great to hear thanks mark!

Justin, my only surprise is that you don’t have 100k viewers already! Your presentation is second to none, concise, clearly spoken and always good content! The video quality is as good, if not better, than I have seen any where else on KZread! I for one hope you will continue to for many years to come! Keep up the good work! Len (Devon 🇬🇧)

@BitnerBuilt

2 ай бұрын

Wow thank you Devon! Very kind of you! ✌️🇬🇧

@mr.b.4048

2 ай бұрын

Liked and subscribed. Found your presentation relaxed and refreshing to watch. For some reason no comments box, so jumped on here. 👍

@rcrogers6

2 ай бұрын

Yo

@mr.listener8580

2 ай бұрын

Ditto! Just watched and subscribed. Love that you don’t go on and on about yourself and other repetitive stuff. YOU PREPARE. AND companies like woodPECKERS charge ridiculous amounts for their products. I couldn’t comprehend why it should cost so much, now I know it doesn’t have to, and I can afford some gadgets that would be helpful without feeling ripped off and angry. Thank you very much. Woodworking is expensive enough.

@BitnerBuilt

2 ай бұрын

Thanks! Yea I personally “can” afford all the big expensive stuff but honestly you feel that you have to treat them carefully since you spent so much, there are lots of good reasonable options out there!

Video quality is brighter and clear than previous videos.

@BitnerBuilt

2 ай бұрын

Ah cool good to know thanks!

@rmora1

2 ай бұрын

At what resolution are you watching, because the 480p and below is a bit grainy and lagging, that could be because of youtube's transcoding though!

Video quality and sound is great. I did enjoy your comments on the tools that you were showing. For the most part they were decent quality and helpful in the shop. Not all tools have to be expensive, good job showing us the tools of the trade.

@BitnerBuilt

2 ай бұрын

Oh great thanks so much!

Great reviews, straight forward, no nonsense ,not holding back to good , bad, or "ugly " and in-between. (from the uk)

@BitnerBuilt

2 ай бұрын

Thanks!

I think the video quality is great. Thanks for buying and checking out these affordable tools.

@BitnerBuilt

2 ай бұрын

Thanks very much!

Video was/is fantastic. I love the way you explain quality, price, and functionality. Glad I found your videos

@BitnerBuilt

2 ай бұрын

Oh wow, thanks so much!

Video quality great. Very clear, colours awesome and sharp. 5hanks for showing the tools and giving a honest review.

@BitnerBuilt

2 ай бұрын

Oh cool thank you!

Video quality is excellent! I bought the Going make concealed hinge jig recently, haven't used it yet, but I was very pleased with the quality of it. Thanks for the excellent tool reviews!

@BitnerBuilt

2 ай бұрын

Thanks and good to hear the same on the quality of the jig!

Video looked good to me. Your reviews are excellent and as a result you are my go to source for guidance on tools I think I need. Thanks

@BitnerBuilt

2 ай бұрын

Oh wow thank you so much! Always try and give some good honest feedback

Your video quality was already amazing but yes it is even better now. Thank you for everything you do!

@BitnerBuilt

2 ай бұрын

Thanks so much!

Video quality is excellent. Content even better! I am ordering several items that you reviewed. Very helpful, thanks 👍

@BitnerBuilt

2 ай бұрын

Oh thanks very much!

I am a 1st time viewer and am very impressed with the content. Thank you Justin

@BitnerBuilt

2 ай бұрын

oh thanks so much Bruce! appreciate it!

Another awesome blog... Thx! The picture is really crisp! 🎉 Audio is also great... Have a great day... Waiting for the next one 😊

@BitnerBuilt

2 ай бұрын

Awesome thanks!

Nicely done. Very nicely done. Helping an SIL with some work. Going to purchase some of these and leave them with them. The balance I'll purchase over time, so as to not overwhelm him and/or her. Thank you very much. Would love to see more if you have time. The quality of the video is top shelf. Thank you for that as well.

@BitnerBuilt

2 ай бұрын

Thanks very much!

Everything is very good…video, sound, lighting and content. Thanks so much!

@BitnerBuilt

2 ай бұрын

Oh awesome thanks so much!

Lighting is awesome, audio is great, really nice video and enjoyed the content. Thanks Justin!

@BitnerBuilt

2 ай бұрын

Oh sweet thank you very much!

Thanks for the tool review, certainly very helpful. Your new camera equipment quality looks really great.

@BitnerBuilt

2 ай бұрын

Oh thanks so much!

Justin - video quality is very good. Combined with great lighting, it sets a great contrast in your shop. BTW - I like the Going Make brand of tools. A lot of bang for the buck!

@BitnerBuilt

2 ай бұрын

Oh, thanks very much. Good to hear! Yeah, I wasn’t familiar with them before and I was hesitant about showing that many tools of theirs in this video because they were provided but honestly you can’t go wrong with milled aluminum stuff. I like their tools as well and some good creative additions to their designs others dont have

As always a pleasure watching you. The quality of this video is very good, I enjoy watching it on a 100” projector screen, feels almost as being there in your shop 😅

@BitnerBuilt

2 ай бұрын

lol oh wow think I need to loose a few pounds before being on the big screen 😂

Very enjoyable video and I learned several things from it. I like your delivery and pacing. Thanks for sharing.

@BitnerBuilt

2 ай бұрын

Glad you enjoyed it!

Excellent lighting and video quality. Sound is natural. Good job on reviews.

@BitnerBuilt

2 ай бұрын

Much appreciated!

This is the first video I watched from your channel. when youtube fed me your video, I immediately noticed how bright and smooth the video is. 60fps is great. content was excellent and I like your soft mellow style. good job!

@BitnerBuilt

2 ай бұрын

Oh awesome great to hear! Thanks so much!

Great presentation, very informative & detailed to the pros & cons of each item! Excellent, well done!

@BitnerBuilt

2 ай бұрын

Thank you kindly!

Fantastic video quality. As a beginner woodworker, the inexpensive tools will be purchased for "learning." It's always good when someone else does the footwork for ya. I will be going to Going Makes for some of these. Thanks

@BitnerBuilt

2 ай бұрын

Thanks! Yea definitely quality for the money

Loved the video. Only one tool caught my attention...the corner clamp. Many times I could have used the ledge feature.

@BitnerBuilt

Ай бұрын

Yea the extra hand that gives you is 👍

Excellent picture, good reviews. Thank you, Justin!

@BitnerBuilt

2 ай бұрын

Awesome thanks!

Thanks for the tool overview. I'm glad you included some duds. It's useful info when browsing junk, but also makes it clear that you're being thoughtful. Suggestion: on your amazon page have a list of your video stuff: mic, camera, tripod, lights, etc. Thanks as always.

@BitnerBuilt

2 ай бұрын

Thanks! Yea I’m not a rubber stamp guy, even good tool companies have some duds!

Not the first good review I've heard of GoingMake over the past few months. Definitely going to have to check them out. Thanks for the reviews. I like your no-nonsense, practical approach to these sorts of videos. I don't feel like I'm being sold something, just told about it.

@BitnerBuilt

2 ай бұрын

Thanks! I appreciate that. Yeah I’m always conflicted when company send me stuff to then promote it but honestly you can’t go wrong with mild aluminum for tools with durability and precision and a reduced price so I really have nothing but good things to say about that company honestly

Great picture quality! I appreciate the reviews also.

@BitnerBuilt

2 ай бұрын

Thank you!

Thanks for the tool review. The video quality was great!

@BitnerBuilt

2 ай бұрын

Oh awesome thank you!

Thanks for sharing this information. I’ll be looking for other videos of yours👍

@BitnerBuilt

2 ай бұрын

Thanks so much!

Excellent sound and video quality. Also good information. I'm a fan!!!

@BitnerBuilt

2 ай бұрын

Awesome, thanks so much

Video quality is great, no worries there! I like those goingmake corner clamps and the concealed hinge jig. Adding those to the arsenal.

@BitnerBuilt

2 ай бұрын

Thanks! Yea they are some nice kit!

Brilliant channel and top notch quality! Look forward to more of your stuff. Cheers 🇬🇧

@BitnerBuilt

2 ай бұрын

Thanks Brian!

Excellent quality and loved your comments

@BitnerBuilt

2 ай бұрын

Oh thanks very much!

First time watching, great picture quality and fantastic tool review.

@BitnerBuilt

2 ай бұрын

Oh awesome thanks so much!

Thank you for the video. By chance, have you come across a shelf pin jig sized for shelf pin sleeves?

@BitnerBuilt

2 ай бұрын

Not specifically but it hasn’t been super on my mind. I’ve used them only one time and know that you have to use a 9/32 inch drill bit (at least the one I used) and I just checked the going make wouldn’t take that. I’ll keep an eye out! I just used the regular jig and then went back and re drilled but obv not the best solution

This is a great video. The picture quality is far better than most and everything is easy to see due to the positioning of the camera. I found the content was very interesting, even though I wouldn’t use many of the tools reviewed. But I did watch it to the end because the presentation was done so well and its an interesting topic - things to look out for when buying such tools And thank you for not using music or trying to be a comedian. 10 out of 10 for this one. It’s only the second one that I have subscribed to though I’ve watched hundreds.

@BitnerBuilt

2 ай бұрын

Wow thanks so much for the kind feedback!

Great video quality,very helpful and informative as always. I am tempted on some of those options? Thanks and stay safe.

@BitnerBuilt

2 ай бұрын

Thanks!

First time viewer so can say that vid quality was great. I appreciate the attention to safety issues.

@BitnerBuilt

2 ай бұрын

Oh great thank you!

Excellent video - concise but very informative. Added to my subscriptions list.

@BitnerBuilt

2 ай бұрын

Awesome thanks so much!

I already have the small 3D square and the countersink that I bought direct from China. I actually use the 3D square quite a bit as it works well to scribe a perpendicular measurement to an edge that I can use to line up on the crosscut or panel sled. The countersink works well and does a nice job making a clean countersink on laminate. It does clog up a little from time to time, but worth the $37 difference from the pro tool. Never had a problem with a snapped bit. Thanks for the other reviews.

@BitnerBuilt

2 ай бұрын

Cool awesome thanks for the feedback!

Video quality is very good; the tool selection was excellent.

@BitnerBuilt

2 ай бұрын

Awesome thank you!

Camera looks good, sound is great too. Keep up the great work, and thank you for the effort!

@BitnerBuilt

2 ай бұрын

Oh awesome thanks!

Great tool review! Video and sound quality is great!

@BitnerBuilt

2 ай бұрын

Glad you think so!

My 1st viewing & you are explaining things very well !

@BitnerBuilt

Ай бұрын

Oh thanks so much!

video, lighting and sound were very good. the selection of cheap tools is also very good, several were interesting to me.

@BitnerBuilt

2 ай бұрын

Oh that’s good to hear and thanks for the video feedback!

Nice video quality. I have the three piece ruler set, i agree they very good/useful tools for the shop. I also have the lifts, they are ok. Thank you for sharing. Everyone stay safe, warm, happy and healthy. From Henrico County Virginia.

@BitnerBuilt

2 ай бұрын

Oh awesome thanks very much!

I think the video quality is great. I watch on a 55" computer monitor and you look fine. lol. Another great video, love that cup hinge jig and ordered it. Keep up the great work. Thanks for all your research and information. All the best...

@BitnerBuilt

2 ай бұрын

Awesome good to know! Yeah, that really is a nice one, when I took it out of the box I was like yes! The built-in clamp is going to keep me from being lazy lol

Nice video. Great content! Thanks for the in-depth reviews.

@BitnerBuilt

2 ай бұрын

Thanks very much!

I usually watch KZread on my phone so I've never had a complaint with video quality, it still looks good.

@BitnerBuilt

2 ай бұрын

✌️

Enjoyed your video, quality of video (resolution) is sharp, well light, sound quality is excellent.

@BitnerBuilt

2 ай бұрын

Glad to hear it! Thank you!

Camera, personality & presentation are great

@BitnerBuilt

2 ай бұрын

Wow thank you very much!

Simple solutions to 2 of the tools. First one, the dowel centring jig. Scrap the bearings, they are only complicating the tool, simple friction pegs. Secondly, the 3d square, much like the overlooked scribe on a sliding combination square, the peg could simply thread into a dead space on the tool. Hope this helps. 👍🏼

@BitnerBuilt

Ай бұрын

Thanks Mike yea I said the same to them on the square, needs a home (but one out of the way!)

Excellent quality video . Great video review . Thanks

@BitnerBuilt

2 ай бұрын

Awesome thank you!

Really great video, first time I’ve seen this in the UK.

@BitnerBuilt

2 ай бұрын

Oh awesome thank you! Always appreciate my views from over the pond so I do all my build videos in metric and imperial 😃✌️🇬🇧

Video seems sharper, also, great content on this one. Will probably pick up a few of the items to try for myself!

@BitnerBuilt

2 ай бұрын

Oh cool, thanks so much!

You video quality is top notch and so are your videos keep up the good work.

@BitnerBuilt

2 ай бұрын

Awesome thank you!

I love my going make thin rip jig. You can even use it in T tracks.

@BitnerBuilt

2 ай бұрын

Yea the additional attachments make it versatile!

Awesome video, will definitely be adding some of these to my amazon wishlist. With the self centering dowel jig, wouldn't it be more stable if you had it rotated so that the ball bearing's are held up against the wood in the same direction that the drill bit is spinning?

@BitnerBuilt

Ай бұрын

Thanks, I tried it in both directions, but just adding a ball bearing on there means that it has easy movement any direction. Some people had made the suggestion to use a punch or a Brad drill bit so it has that small little spike, that helps prevent wandering, even in normal drilling situations

Video quality. Rey good and thanks for the info on going make tools.

@BitnerBuilt

2 ай бұрын

Awesome thank you!

I really like the new camera setup. Makes for a more professional content. I like your not bashing the not so well priced but well known products. Pretty even handed were your assessments. Thank you for your video.

@BitnerBuilt

2 ай бұрын

Thanks so much!

Video and audio are excellent very professional

@BitnerBuilt

2 ай бұрын

Much appreciated!

Video quality is excellent!

@BitnerBuilt

2 ай бұрын

Oh thanks so much!

First time viewer, loved the content and your input on the tools. I was a breath of fresh air not having someone shove expensive tools down our throats. Thanks. Oh, the video quality was great.

@BitnerBuilt

2 ай бұрын

Oh awesome, welcome Robert! Yea I’m a bit proponent of every tool brand has some winners and losers, it’s fun to fine the winners that don’t break the bank! Thanks for the video quality feedback!

Lighting is great. Good investment.

@BitnerBuilt

2 ай бұрын

Awesome thank you

Excellent, thank you. I enjoyed your comment on the plastic hinge tool that “the holes have got bigger because I have used them”. 😂 That is where you slipped up - you used them! The tool would have lasted a lot longer if you hadn’t.

@BitnerBuilt

2 ай бұрын

😂 I know right how dare I use the tool lol. Glad you enjoyed it!

Good job…video quality was excellent.

@BitnerBuilt

2 ай бұрын

Thanks!

Great video Justin I have purchased one goingmakes tee square and it’s a great tool and going to buy the thin Rip jig next they are some great tools glad to hear your opinion on them. As a new woodworker can afford them other Red tools. The video quality looks great and the sound was great too.

@BitnerBuilt

2 ай бұрын

Thanks Jim, glad to hear you like it as well, honestly putting them next to my reds (I have a few) there’s no difference

One day, when I'm grown up, I'll be able to make videos like yours....👴👴 Great lighting, focus , sound quality, not to mention the excellent planning and narratives...👍👍👍

@BitnerBuilt

2 ай бұрын

Haha well thank you very much, very kind!

great video. I appreciate the detailed reviews on the bargain tools. The video quality was great.

@BitnerBuilt

2 ай бұрын

Thank you!

Video and audio quality is excellent. I think you didn't go long enough. Looking forward to the sequel.

@BitnerBuilt

2 ай бұрын

Haha thanks!

Thank you for another excellent video

@BitnerBuilt

2 ай бұрын

Glad you enjoyed it

Video quality great, comments, very useful. Only just been offered your site, and considering signing up. now looking at your back video's, which should clinch the deal. Brian in the UK

@BitnerBuilt

2 ай бұрын

Thanks Brian! ✌️

Justin, thanks a lot for good tools review and suggestions. Helpful as usual. About video quality and equipment... Well, not so good quality, but that's not because of bad equipment, but most probably not configured well. For instance, was a little blurry then it was as usual. Play with different configs. Unfortunately don't know which equipment you purchased, so no specific suggestions.

@BitnerBuilt

2 ай бұрын

Thanks for the feedback yea I went from a iPhone which will have everything all in focus to a lens that’s going to give some depth and boca behind me, not sure if that’s the right decision but going to play with it a lot 😃

First time viewer. Video quality is very good.

@BitnerBuilt

2 ай бұрын

Thank you so much 🙂 and welcome!

Great video review (with really good video picture quality)~! ;-) I've been a frequent-flyer buyer from "big red" and I'll definitely be picking up some of the GoingMake products. I'm also a fan of the big blue label, but I like that European hinge jig. Since I don't own one yet, I'll be going for the one you showed. Thanks for this one~!

@BitnerBuilt

2 ай бұрын

Oh awesome thank you! Yes that hinge jig is very nice, that company is making a good converted effort to make durable cheaper items but also innovate on the designs so I think they will be a player going forward

I really, REALLY hate videos like this. Because they make me want to buy more tools! Seriously, a great video, showcasing how those of us not made of money can get quality tools at a bargain price. Just subscribed, and I'll look forward to more content.

@BitnerBuilt

2 ай бұрын

Haha my apologies to your wallet! Yea I’m a firm believer that there are great tools at all price points just need to find them!

The quality of the video was excellent. I was thinking about the centre finding jig. If you were to use a s centre punch with the jig and then drill, would that stop the drill bit slipping?

@BitnerBuilt

2 ай бұрын

Hmm prob, you would need to punch first prior to placing the jig, but definitely clamping best. Thanks for the feedback!

@woodrowsmith3400

2 ай бұрын

I was thinking brad point bit, as they have far less tendencies to wander...

Great vid fantastic picture quality😊

@BitnerBuilt

2 ай бұрын

Awesome thank you!

Good video brother I got to ask you a question where did you get your coveralls for your woodworking can you let me know please thank you sir

@BitnerBuilt

2 ай бұрын

Thanks and sure here’s a link to my apron amzn.to/3wV0roi

First time I’ve seen one of your videos, great video

@BitnerBuilt

2 ай бұрын

Oh awesome thanks!

Video seems fine to me. Thanks for doing this. I often wonder if any of the cheaper off brand tools are worthy.

@BitnerBuilt

2 ай бұрын

Great, thanks! Yeah, with the cheaper stuff it’s always a hit or miss as I tried to show in the video, too, I really do feel, though that a lot of the tools that are made out of mill aluminum are really great in precision and quality, and aluminum pretty cheap so it’s hard to go wrong there

Video quality looks great.

@BitnerBuilt

2 ай бұрын

Awesome thank!

Looks great lighting clarity video

@BitnerBuilt

2 ай бұрын

Awesome thank you!

Hi there. Love your channel. I have been looking for a new apron. I watched you videos on aprons but notice that you have gone back to your original apron. Is this your fav?

@BitnerBuilt

Ай бұрын

Thanks so much! No I liked the darker brown one the best however the strap is leather and it was making a creaking noise right into my microphone, so it’s very much a me issue! lol

Very nice video work! Would like if you can make more close up videos of the tools.

@BitnerBuilt

2 ай бұрын

Will do. Thanks!

The picture quality and sound are great! Thanks for the info. New subscriber here.

@BitnerBuilt

2 ай бұрын

Oh awesome thanks so much!

Thank you for taking a look at these budget friendly tool options. On any of the tools that are meant to act as squares, did you evaluate them for square? Its great that the big t square is more than half of the red tool brand but is it as accurate? Thanks!

@BitnerBuilt

2 ай бұрын

Yes it is square! Sorry I kind of tried to run through the last few a little fast because I didn’t want to make it seem like it was the going make show! I always check my square especially long ones with the miter slot on my table saw, they are adjustable with the screws and came out flat and square 👍

@murariufamily

2 ай бұрын

@@BitnerBuilt Great! Thanks for the quick reply.

Thanks, great video! Going to have to check out that brand, Going Make. Speaking of which, on the T-squares, did you happen to check them for square. and if so, how did they come out? Also, video quality was great.

@BitnerBuilt

2 ай бұрын

Text thanks! Yes, I always check all of my tools for Square specifically at the table saw if you use the edge of your cast-iron saw top with your miter slot. It’s a great way to align along tool like that. When you assemble it, you put all six screws in loosely and then set it up at the tablesaw and then tighten it down so that you know that it is square, the bigger question will be how long will it maintain its square before being needed adjusted again, but it’s just you know the normal par for the course with things like your fence, squares etc.

I liked the tools and the video equipment is working really good

@BitnerBuilt

2 ай бұрын

Oh awesome thank you!

great video quality and great subject. Save your money on tools not frequently used.

@BitnerBuilt

2 ай бұрын

Thanks! Definitely

Hi Justin first time viewer. very impressed with your video picture is crop and clear,I will be a regular viewer from now on as I tho enjoyed the content. Best wishes. Ed

@edwardmacdonald5453

2 ай бұрын

Sorry Crisp and clear Ed

@BitnerBuilt

2 ай бұрын

Wow thanks Ed, appreciate it!

Just a suggestion on the self-centering dowel jig: always rotate it the direction the drill spins and you'll have less, or zero, movement. Those tend to move more if you're trying force it against the spin because the bit will grab it some and fight against you, so let the bit help by grabbing it into the same direction (rotate clockwise on the wood).

@BitnerBuilt

2 ай бұрын

Great tip!

Hey Justin. Thanks for the useful content. Video quality seems fine. I was happy to see you address T squares because I can’t go with the big red company prices but disappointed you cut and ran so quickly. I’m assuming since you gave them a thumbs up the construction and accuracy was spot on ?

@BitnerBuilt

2 ай бұрын

Yeah, I didn’t want to make it the going make video, you know, since those things were sent to me. Yes, definitely thumbs up, all three squares. When I did set up at the table saw came out perfectly square and flat. I always set those up using the miter slot on the table saw so you can make sure that you’re perfectly square over the long distance, before you torque down the assembly screws.

@samh9072

2 ай бұрын

@@BitnerBuiltgreat! Thanks for the response

only one quick note, on the self-centering dowel jig (at least in my experience) it helps to use a center punch, marking knife, etc. to give yourself a dimple to reduce wandering. otherwise great video, definitely subscribing 👌

@BitnerBuilt

2 ай бұрын

Great tip 👍

Where did you get that work apron? I like it a lot

@BitnerBuilt

2 ай бұрын

amzn.to/3IO3AsN

Very crisp video!

@BitnerBuilt

2 ай бұрын

Thank you very much!

Hi Justin, How is the knockoff JessEm table saw locking wheels? Do you use them? Is there any value to that system? Thank You, Steven

@BitnerBuilt

2 ай бұрын

Can you send me a link? I will pick them up and see for a future video

@steven6068

2 ай бұрын

Hi Justin, let me find the PDF and I will send it to you.