Just converted my stock rims to tubeless by using an all purpose epoxy and a tire sealant. Been running it for 6 days now without any pressure changes. I hope my diy home job will last!🙂

@vilaskulkarni3147

Жыл бұрын

With my own experience I want to caution you of sudden deflation due to leakage of air through spoke holes! I had faced so sudden and threatening wobble at around 80 kms/hr speed of bike's front wheel and I escaped the disaster on the highway, narrowly, using my skills and years of driving experience as the amount of airleak through spoke holes is tremendous and very sudden! Yes, some vehicles may be running on such arrangements of putting Outex or other packing solutions to make the rims, tubeless for months but you can't be 100% sure whether next time, your turn to face the disaster won't be there! So, please keep in mind, it's "jugaad" and it's not full proof solution! Please!

@drvivekmallan

Жыл бұрын

RIP in advance

@Lon3wolf13

Жыл бұрын

@@drvivekmallan its been 9 months of used already, no problem whatsoever! I got a pantured on the rear tire twiced, pulled out the nails and the sealant did its job. Did not even bothered to patched it!

@FoxyCAMTV

5 ай бұрын

Is it still working 1 year later?

@hyperrwheels

4 ай бұрын

yes, its working fine 😅

Really enjoyed the whole video. Thanks for sharing your experience. Loved the start. ❤

What a video!! Upto the point.. thanks mate for making such video without any bakchodi🤘🏽

@hyperrwheels

4 күн бұрын

@@euginmassey7017 thanks bhai 🤘

Thank you for sharing your experience. Ride safe. Will be looking forward to more videos from you.

Wow i just read through your discription, youve done a proper break down . Thanks for this detailed effort brother. Cheers

Congrats bro! I too have heard about highly unprofessional handling of logistics by Dismotech chaps but simultaneously, I have read about good stuff they make to special requirements in the same thread! Please share your experience about the front spoked tubeless rim alteration, definately! It's extremely critical solution to the perennial problem of tubed tyre punctures of our Himalayan while we also want to retain the spoked wheel too (albeit with some good and dependable tubeless arrangements). Installation of your bike's front tubeless spoked tyre seems to have achieved the success of both worlds : flexibility of spoked rim and nullification of puncture problem to large extent! We had tried outex arrangements for making the spoked wheel as tubeless but I can tell you with experience that the arrangement is frought with danger at relatively high speeds or with luggage & pillion! We desperately need good spoked rim with tubeless arrangement which must be dependable! Which seems to have been found by you! Please share your experience! Another question : why didn't you change the rear wheel to spoked tubeless wheel as you have done with the front one?? Was it deliberate?🤔 It's very shameful of Indian bike manufacturers about not providing option for spoked tubeless rims whereas, the unknown Chinese brand Zontes, which has introduced 350 cc bikes in India recently is readily providing spoked wheel with tubeless arrangement as standard! Shame on bloody local bike manufacturers here🤬 These buggers should at least provide the option for us to purchase it separately, if they are not providing it as standard equipment! How bloody shameless! Isn't it??🤔 Please provide some contact no of Dismotech people too! Thanx

@SatyamMishra-tk4fd

Жыл бұрын

Vilas ji, very aptly put. RE is at the fore front of being Shameless and Deaf to customer feedback...... they think engines need to be good the rest of the bike can be a pristine example of bad engineering.

@dragonking2729

Жыл бұрын

​@@SatyamMishra-tk4fd they knew people are going to modify it from headlight to it's chassis so they don't care anything other than engine. They just give you a blank Canvas to do your own.

What a RIM Journey...its Look Fab Bro

I really liked the way you make your videos... Sidha point pe but saare Info ke saath.

love u fr this idea my worries has gone n punters and heights

enjoyed and had very clear information. Thank you boss

yeh toh rim job ho gya bhai k sath😂..... bawal chiz bna diye ho yaar bike ko 👌

great narration.feels like listening to a fairy tale .. good going bro

Excellent review !!! Really enjoyed it

Aawaz damdar hai bhai tumharai. Aur video production quality bhi bahut aachi hai. Subscribers kam hai but potential hai channel me. Keep making videos.✅

Can we not put the same spokes rim in back as well and make it tubeless

Well Done Brother, Bro hunter front alloy is also perfect fit for interceptor, just you have to install in opposite direction & our stock interceptor speedometer will not work.

Good one. Pretty informative. I've been planning on picking up a CGT and been planning all the necessary changes for it. This should help in the long run. Thank you.

@niharikajoel

Жыл бұрын

@@hyperrwheels ❤️

Bhuuut hi badiya shandar

Kya ye rims rear tire me v install ho sakta hai ....??

Well done bro, keep us updated on the dismo quality

Excellent video and informative.

Ek no bro

Tabahi Mast Bro

How is your experience till date with tubeless spoke rims ? Would you recommend Dismotecch ? How about the quality ? Your suggestion will be helpful Thank You

Keep uploading with updates.👍

Excellent video - subscribed! Has the high speed handlebar wobbling gone after this mod? Why did you order a front wheel hub? Couldn't you use the existing one?

Front hub kaunsi bike ka hai? Aur how much did dismo charge?

You went in with both 17 inch on both ends ? How did that affect performance? Also one rim is 18k then a couple would be like 36k i suppose

Hi bro just want to know how is it holding up

Bhai rear wheel bhi agr tubeless krna hoto koi company hai ? Plz reply

Nice video

Bhai please make a video on updating how these rims are working with all pros and cons.

Bhaii front ka hub konsa bike hae??? Same thing I want to do with my gt please help me out

Brother does it stop the tyres wobbling issue with the interceptor, also can you share the entire cost of this upgrade, due to the wobbling issue I am kind of lost hope with the interceptor and wanted to change with something else, your response will be most helpful, thank you for taking your valuable time.

Does it improve handling ?

Hi, can you please explain the total cost for this upgrade as well as detailed video about other upgrades.

So beautiful bhai❤️♥️

is this rims available for xpulse 200 4v 18 inch rear tyre??

Can you share feedback on how bike is running now on 17's

How are you managing rust on the bend pipe connecting to engine

Bhai please make more videos like this

Do we need to change the swing arm to accomodate that 150 section rear tyre bro?

Is there any way to correct speedometer/odometer to alter new wheel size on the front? Thanks :)

@hyperrwheels

10 ай бұрын

Hi, no couldn’t find any solution till date. Once found would surely love to share the same.😇

Hello, Great Video. I'm thinking of going for the Dismotech Tubeless Conversion for my Himalayan (Rear) How's the quality of it, and should I go for it?

Great

It looks better if both the wheels were converted to tubeless spoke wheel, where comfort of spoke wheel and convenience of tubeless can be achieved.

What is mileage with rear 17 inch ?

Brother supposed rear wheel 17inc ho & front 18inc ho to bike speed balance may koi problem hogi please share suggeste

bro front hub kaisa magaun showroom walon ko kya mangu plese reply

@nikhiltripathy7910

Жыл бұрын

@@hyperrwheels thank you bro

Nice video man

@amrendrakumar-sf3ef

Жыл бұрын

Sir wo tubeless rim Wale ka no milega

Back tyre mein bhi tubeless spoke rim lagwa do

How much for bhot rims and tyres???

Great video bro.. Performance aside, Dismotech rims look horrendous IMO. Thanks for sharing your experience with them

@hyperrwheels

11 ай бұрын

thanks bhai.. i hope you like it.. 😇

Cost of that spokes?

❤hot bike bro

Seat height kitna reduce hua?

Nice

Did you consider using 150/70-17 wheel instead of 150/60-17?

@mudit1939

Жыл бұрын

@@hyperrwheels is Apollo alpha H1 better than Ceat Rad X1?

What's the ground clearance now?

Can i use 18” rims like this in classic reborn 350

So one rim is from dismotech and other one is meteor ? Why not both from Meteor ?

@anuj87in

Жыл бұрын

@@hyperrwheels ok . I assume that’s because you had already ordered from Dismotech . What are your thoughts if someone orders both front and back from RE meteor . ?

Very clean job mate. Looking for long term review on the dismo wheels …

Back Rim nahi milta hai kya??

Brother from where do u buy that tail ?

Bhai rear mudgaurd kaha se liya??? Aur khud bnvaya??? Me paresan hy old school vahiyat looking rear mudguard se so i removed it

@sagarparmar1500

Жыл бұрын

@@hyperrwheels precision achha hy instagram kya hy aapka??? And rusting ka kese resolve krte ho mere interceptor me vo engine bendpipe join ka vo clamp hy uspe bohot rusting aati hy

Feedback review to bnao chalne me kaisi hai performance kaisa raha iska

@aaquib_jawed

Жыл бұрын

@@hyperrwheels waiting for your that video upload soon

How much did the front rim and tyre cost?

@Drracer18

Жыл бұрын

@@hyperrwheels thank you

looks fantastic... how much are the rims in UK..? ££ ?

@hyperrwheels

Ай бұрын

thanks 😊 check video description for more info.. they are in Bangalore India, you can contact them for delivery information.. ✌️

@hyperrwheels

Ай бұрын

but they don't have a good logistics support, not even in India.. fyi 😇

El aro o rin tracero de que moto es?.... gracias

@hyperrwheels

8 ай бұрын

La llanta de aleación trasera es de Royal Enfield Meteor y es de ajuste directo. 😇

Haha shop ko dekhke maine khud ko bola ki "aise shop to maine apne shahr me Mandi Chowk ke paas dekhi hai" 😂😂😂

Is the abs working the same way?

@hyperrwheels

11 күн бұрын

@@Techiemotorist yes it is 😇

@Techiemotorist

10 күн бұрын

@@hyperrwheelsthanks for your reply. Actually I had seen abhinav bhatt's video more than 2 years ago in which he said that his abs was not working properly so he removed it. What about the seat height? I am short. How much has the seat height reduced?

@hyperrwheels

9 күн бұрын

@@Techiemotorist I haven't faced any issues while braking, whether it's normal braking or panic braking. The seat height has been adjusted to a level where I'm comfortable; my height is 5'6", and I now feel more comfortable with 17 inches compared to the previous 18 inches. hope this helps 😇

bhai kya aapke bhi rim aur shockers k beech m uneven space h dismotech wale

@hyperrwheels

Жыл бұрын

nahi bhai, mere shockers aur rim k beech (left & right) mein lagbhag equal spacing hi hai..

Spoke ki cost kitni aayi

Can I ask why you needed an extra hub for the rim. Does the stock one don’t fit. If the stock hub doesn’t fit then shouldn’t dismotech provide Hub for the rims as well.

@adityabaruah3529

Жыл бұрын

Thanks for sharing bro. The bike looks dope though. What was your delivery time BTW

@adityabaruah3529

Жыл бұрын

😅. Thank you for the updated. I just ordered mine. Both front and rear. Costed around 37k

HI BRO I ALSO PLANING FOR 17INCH TUBLESS SPOKE RIM HOW WAS THE EXXPERIENCE

How's is performing? What is actual cost?

@amitamit6564

Жыл бұрын

@@hyperrwheels thanks brother. Did they paint it in dual tone themselves? I am not able to find their official website.

Cost of tube less rim?

18 inch mai tuneless rims nahi milega kya

Headlight grill kaha se purchase kiya pls give link

@hyperrwheels

4 ай бұрын

Viv Designs Headlight Grill | X-Type (Himalayan 2020) amzn.in/d/9kwfvV8

Bro any ground clearance issues bro

Then why don't you use hunters alloys they come with 17 inch front and back alloys right ???

@jeevanjacob9213

Жыл бұрын

@@hyperrwheels what kind of speedometer issue

Hi I want both front and rear rims like this is it possible.

@hyperrwheels

4 ай бұрын

yes its possible

Cost kitna aaya.

Front and rear ke separate price bta do Chaudhary dealer se

How much it all cost

Price kitna hai bhai rimm ka

Bro will u tell me which royel Enfield hub u have use in front spoke.

@rajivthakur

Жыл бұрын

Thanks

Is there any kind of weight reduction in the bike due to the rim change?

@antonyshani9705

Жыл бұрын

@@hyperrwheels thanks for the reply. How about the ground clearance

@antonyshani9705

Жыл бұрын

@@hyperrwheels i want to change my interceptor's back rim to alloy. I'm planning to put metor 350's alloy. Will it be good.

@antonyshani9705

Жыл бұрын

@@hyperrwheels thank you 🙌

What about Hunter 350s alloys? It's 17 inch in size and will perfectly fit.

Can you provide us long term review of this ryme..

@hyperrwheels

10 ай бұрын

Hi, give me sometime.. Will surely upload a video soon!!

@kushangraj9122

10 ай бұрын

@@hyperrwheels Okey..

@amitkrupal1234

9 ай бұрын

​@@hyperrwheelsis it ready

Total rim ki price or. Buy karne ki link

Rear may allow hi kyo

Bhai editing app kon sa ha

@j.sgarage2109

Жыл бұрын

@@hyperrwheels thanks bro good work video or bike both

Cost?

How much is the meteor alloy wheel bro

@hyperrwheels

Жыл бұрын

i purchased it for 6k

Please share the link of headlight grill

@rohitsen3165

Жыл бұрын

Thank you so much 🙏

Stock front hub will fit or need to order something else

@vikastanwar9707

Жыл бұрын

@@hyperrwheels what's the price of both spoke tubeless rims

Bro...... Tubeless rims review bro.... Jaldi batanaaaaa

Do we get 18" tubeless rim, for 2.75 18 or 3. 00 18

@shamanth420

Жыл бұрын

@@hyperrwheels thank for your time and information 🙏

Hello! Bro, Can you provide me the contact details of the rims dealer where you have ordered...