Thank you for the sacrifices. Very informative. WDA110 F138 error: tilt to drain trick.

@thatperson8586

Жыл бұрын

I have the W1 twindos that I bought in November, so it's barley 3 months old. Went down to put in a wash and it beeped F138. No water on the floor until I tilted it, a few cups of slightly suddy water came out. Not acceptable. I faffed fixing my 12 year old ecobubble and couldn't be asked anymore, but looks like I'm going to have to try and find out if there is an issue with hopefully a loose hose or something easily repairable and non-concerning. Really not happy at all, was sold on the "tested for 20 years of use" and I barley get 3 months without a concerning issue from a £1000+ machine. I also never received my cashback from Miele. Kind of disgusting to be honest. I'm lucky as I was intending on getting a Miele dryer and dishwasher, but no thanks! I will be looking elsewhere.

Cat be like "WTF, you moved my bowl"

Hii, Thank you for your information. Could you please let me know how did you remove the top cover . That was not explained. Also the front load cover. I am looking for information to shift my washing machine from one tiny room to another room. I hope washing machine does not get spoiled if I only remove the washing machine front cover and the top load because door is very narrow.Washing machine model is Miele W 4146 Softronic.

The cat is adorable!

@sadiporter2966

2 жыл бұрын

disclaimer: don't put cats in miele washing machines.

@mielewasher218

Жыл бұрын

@@sadiporter2966 Ha!

Thank you for disassemble machine

Great video my good sir.

Quick question does some water not much stay in the seal at the bottom.

year of production?

Please tell me what's wrong with the machine

Which model is this? WED125?

I need to change my door seal im guessing the way he yanked it off isnt the correct way as how do you the get the inner metal ring around when re fitting the new one..

a break of Miele Drum Spider ( between the bearing and its support )

As far as I know Miele have changed the design of the spider since that machine was made, they have returned to using a steel spider at the back of the inner drum instead of the alloy type seen here. If you look at the more recent machines the pattern/design when you look into the drum is different, the centre has a hexagonal shaped nut pattern.

@JIMDP25

2 жыл бұрын

i hope mine the wcr 870 wps has the new spider

@lingi567

2 жыл бұрын

@@JIMDP25 kzread.info/dash/bejne/fHeGzM-un9bOe7A.html

@Audios81

2 жыл бұрын

That's not an alloy spider. No idea where you got that. It's a cast iron spider. Used for durability and counter weighting as well. Miele has NEVER made a machine with steel or aluminium spiders. Full stop. Asko is also the only manufacturer to use stainless steel spiders which DO NOT corrode like aluminium, which is what 99% of other machines use. Miele and Asko are always the only two brands that use stainless steel inner and outer tubs. No one else does.

@Audios81

2 жыл бұрын

@@JIMDP25 all Mieles have a cast iron spider. Every single model regardless of price. No idea where these people are getting steel or aluminium or any other alloy. It's 110% cast iron spider for durability and counter weights.

@Audios81

2 жыл бұрын

You can also see the CAST IRON counterweights on the front of the tub as well. Never in history has Miele used aluminium or steel in their spiders or counterweights. Others use aluminium spider which corrodes easily and also a plastic or polymer outter drum/suds container. And others use concrete counterweights on the front which crumble and break apart over time.

I watched this to the end but what was it about? Was it meant to be a repair… what??

14,000 rpm ?? No need for a tumble-drier!!

How did you get the top lid off so easy? Mine is stuck!!

@zildor3635

9 ай бұрын

Top lid has 2 screws on the side which are covered flushed with round covers (dimples).

All i want to know is how to get the front PCB out without pulling the whole machine to bits. I know it can be done, but no one shows how to clip it out in any videos 😕 😢

How did you remove the top?!

@pauld3327

5 ай бұрын

There are 2 screws ( one on the left side and one on the right side)

How did you take the top off?

@Edwilldesign

7 ай бұрын

On my W1, there are two screws under white caps at each side of the lid. Pop out the lids with a fine flathead driver. Screwing these anti-clockwise slowly moves a catch apart inside, on that side of the lid. As you screw, keep trying to lift the lid. When the screw is halfway out, the lid will lift free on that side. Be careful not to totally unscrew it. Repeat on other side and lift the lid away.

Where is the cast iron weight?

@Audios81

2 жыл бұрын

It's the black spider on the rear in a cross pattern and the back cast iron along the edges on the front of the drum

@miketsai75

2 жыл бұрын

@@Audios81 yea I got it before. Thanks for advice. I bought WED125 finally few months ago.

Шпильки нужно было подогреть газовой горелкой чтобы демонтировать крестовину

no stainless steel flange :(

Tekrar eski haline getirebildimi🤫

way too much work if you want to clean the drum properly by removing it when several cleaning cycles doesnt clean it...

miticooooooo

Seems nothing has changed for decades

What's wrong with it? Was waiting for you to say what at beginning. I had a Miele for 1 week and didn't like it, got an LG instead.

@edcash6357

Жыл бұрын

I think a break of Miele Drum Spider ( between the bearing and its support )

@lahonymanor2927

Жыл бұрын

@@edcash6357 Thanks for your reply and I was very curious to know. :)

AAAAARRRRRRGGGGGGHHHHHHH No proper ending no proper explanation what was wrong!!! Was there ever an explanation anywhere!?!?

Useless….