Thank you very much, 10 years later and your video is still helping people, I checked my filter as your way, it worked now, amazing!

@Endpoint101

Жыл бұрын

Thank you so much for commenting & letting me know it's still useful 😊

Thumbs up for helping all! same issue on my serie6 washer dryer

Thank you!! Just saved me a service call - this very unhandy person fixed the problem by following what was done in this video. There was a tiny bit of dirt inside but didn't seem enough to stop it working, but it is working now! My dishwasher has the check water light on the front and the cycle wasn't even starting, so different model, but same fix.

@Endpoint101

10 жыл бұрын

Glad it helped! :-)

Wow great advise. Thanks

Thanks for the heads up on this. Removed a tiny piece of dirt and everything seems to work again.

@Endpoint101

4 жыл бұрын

Yeah, it seems really sensitive to tiny specs of dirt.. but I've not had a problem with it since shooting this video, which is pretty good going :)

Thank you very much, I did this on our parmco dishwasher and yes the wee filter had some corruption on it. Such a relief not to call someone out. It worked straight away.

@Endpoint101

4 жыл бұрын

Brilliant.. I'm glad this helped!

I had the exact same issue. I followed the instructions and it didn’t work until the next morning. I have to assume the waste filter has too dirty and it eventually emptied once cleaned.

yes cleaned this then tilted dishwasher on its left and right side all the way and working dishwasher now

Sir dishwasher me water filter down me lagana h ya kha per

Thanks I know it's a old video but it fixed my problem mine was full of black gunk , you have saved me a few hundred $$ thanks

@Endpoint101

Жыл бұрын

Awesome! So glad it helped.. it was one of the first KZread videos I recorded :)

Thanks bro

That's an aquastop inlet hose which protects the room from flooding when the inner hose fails.

After cleaning the filters, which were full of rusty dirt. The plastic filter casing's threats, similar to the one in video were apparently damaged and was unable to screw it back to the coupling in the wall. I s it possible to obtain the filter casing or plastic screw - in casing without having to replace the entire inlet pipe?

I've got exactly the same problem but I don't see a resolution on your video.. I checked the inlet and completely clean. But there is a filter on the machine and I guess we need to look at that. Sometimes number 7 shows as an error in the manual and sometimes number 12. I think number 7 means cleaning and we've cleaned all the filters and the pump impeller seems to spin without a problem. Number 12 is this video.

how is this "solved"? you still dont know why the light is on

@Endpoint101

10 жыл бұрын

We've not had it since we made sure we weren't running another appliance (like a washing machine) at the same time.. as I mentioned in my update in the description, it seems to be the drop in water pressure that causes the problem.

@teemutalvitie3309

4 жыл бұрын

😂😂😂😂😂

@ADIIIIIIIIIIIIIIIIIIIIIIIIIIII

3 жыл бұрын

@@teemutalvitie3309 😂😂😂😂😂

No luck on ny Bellini BDW127X-F. Opened mine up, removed what I think was particles of rust from our old (now replaced) pipes. Plenty of dirty water so I'm betting we're in for a new inlet hose if I can bloody figure out how to get to the bit that connects to the machine.

@Zsixpence

3 жыл бұрын

ive got the exact same issue been searching and trying everything to fix this issue and so far no luck

Same problem. I found a very small amount of limescale in the filter, put some vinegar on it, and watched it dissolve. Seems to work fine now. Still, the amount of limescale was small, and unlikely to have caused the problem.

@Endpoint101

7 жыл бұрын

It's weird.. maybe simply opening it up clears out an air bubble or something?

i have a dishwasher where this exact part that you are showing in the video is leaking. i am trying to find out how to open this white plastic casing and also what exactly that part is called so i can replace it. if i order a water inlet valve, which is what i think it is, is it? will any valve work with any model? i am not able to find my dishwasher by model number. help? thanks

@Endpoint101

8 жыл бұрын

+dishfixhelp storm The dishwasher model number should be etched in the metal of the door.. I had trouble easily seeing this on our old one, and ended up taking a picture at the right angle for light to reflect it best.. then enhanced it in an image editor to really help see.

I put dishwashing liquid in behind the filter and restarted it. Seemed to clean out the system and is working fine again.

@Endpoint101

2 жыл бұрын

Brilliant.. glad it helped! Nice tip!

My Bosch dishwasher is brand new and the squad top valve leaks!

@Endpoint101

4 жыл бұрын

That's not good. Where's it leaking from?

@trigger3178

4 жыл бұрын

All fixed now 👍 I didn’t tighten it up enough 🙄

thanks

not sure if its a good indicator, but instead of ripping the filter out and finding out it was ok, just shine a torch through the side of the plastic box and if the light shows through the filter i would assume its clear. I still have the issue and i am still investigating.

@Endpoint101

8 жыл бұрын

+sempei58 Hmm, I'd still open it up like I did in the video.. stuff gets trapped in the black washer and red plastic insert.. you'd not see that by shining a torch through it. It doesn't take long to unscrew and check it.

I had the same problem after a bit of cursing and swearing I found that it was the Aqua stop solenoid stopping the water going into the dishwasher good old eBay I've ordered another hose just waiting on it to arrive

@timbigger1731

Жыл бұрын

Did it solve the problem as I think I have the same issue.

Where is the filter usually located

@Endpoint101

5 ай бұрын

At the end of the water inlet pipe that comes out of the dishwasher.

Does your washing machine open automatically? if so, is there and on/off switch for auto open after its done washing?

@Endpoint101

Ай бұрын

This is a dishwasher in the video. But our Bosch washing machine(s) haven't had an auto-open feature.

@jonlarsson5401

Ай бұрын

@@Endpoint101 oh sorry I meant dishwasher, not washing machine

@Endpoint101

Ай бұрын

@@jonlarsson5401 No worries :) TBH, I didn't even know this was a feature! I guess it helps to vent the steam & dry the dishes faster?

@jonlarsson5401

29 күн бұрын

@@Endpoint101 me neither. All dishwashers I've used automaticly opens after they're done. but my new one doesnt for some reason. it only beebs and then I have to manually open it. thinking it might be a child lock or something. can't figure out how to set it on open.

some lights would help in this video to lift the gloomy shots

@Endpoint101

4 жыл бұрын

Yeah, you're right.. if I was shooting this again, I'd do that.. thanks for the constructive feedback

Dishwasher water inlet filter check [HD] - NOT SOLVED

@Endpoint101

4 жыл бұрын

:D It did solve the problem for me.. not sure whether it was a small speck, or air bubble, but we've not had the issue since.

@alexanderbuckley8975

4 жыл бұрын

@@Endpoint101 Yeah but you did not do anything. You just looked at the filter and found nothing was wrong with it and screwed it back together. You may have inadvertently released some water or air. This guy SOLVES the problem: kzread.info/dash/bejne/lmpkpKyoaMngoKQ.html This issue is caused by either a leak into the bottom tray or the foam bar in the overflow trigger if it is so old it has deformed and needs replacement (it triggers without water). Following this guys video i was able to determine that the small dent in the dishwasher door has compromised the seal and water was leaking into the lower tray, triggering the overflow value and thus showing the water inlet error.

h:24

Where is the filter and how you removed it is not shown. No use of incomplete video.

@Endpoint101

4 жыл бұрын

It didn't actually require any further dismantling.. not sure if there was a speck of dirt I removed, or an air bubble, but this solved it without doing anything else.

That filter are crap and valve are bad. if something goes into valve it can open and close at higher water pressure or hot water (hot water inlet dishwasher)

Why did you make this video? Lol!

@Endpoint101

3 жыл бұрын

Hoped it might help someone.. I've not had trouble with mine since opening it up; was thinking maybe it was an air bubble or something.

@SE25able

Жыл бұрын

This helped me. Upon unscrewing the pump part from the water supply, I notice that I don’t have the red part in my filter.. only the white! But my dishwasher has been running really well up until recently. Maybe it’s due to glass or or ceramic plates chipping ? during the cycle? I checked the filter and white spinner thingy at the bottom of the dishwasher and had a clean but did not feel Or find anything.I believe you are correct to mention when using the washing machine and dishwasher at the same time the water pressure drop as they are both connected to the main supply. Thanks 😊

Yeah, isn't German Engineering fun? You have to babysit something that should not ever be a problem. The water inlet line? Why is there a filter on the water inlet?? WHY?? Just let the water come in, let the cycle run and let the miserable excuse for a dishwasher catch it in its 'user maintained' filter. That is still a pain, but arguably easier than pulling the dishwasher ever 6 months. Sheesh. Does anyone know if you can just get rid of that screen so you don't have to spend an hour disassembling the thing? Yes, you have to unscrew it from the cabinets, disconnect the water line, mop up all thew water that belches onto your floor, pull out the filter (which is connected to the inlet solenoid) and clean it without breaking the solenoid.

@weimou4203

5 жыл бұрын

@Cap'n Jan, I had the same thought as you have commented above. But after disassemble a dishwasher inlet valve, I realized that a filter is necessary to protect a moving stem inside the inlet solenoid. Without a filter, a solid particle could be stuck on the surface of the moving stem causing a jam of the solenoid.

@kremepye3613

8 ай бұрын

So the supply lines inside your dishwasher don't calcify and stop working after 6 months if you have a bore water or hard water supply