Hi! I've just got this KIT from a lovely friend of mine, and I got stuck in a sea of questions! This video was really helpful! Thank you for sharing!! Keep up the good work!

@robojax

Ай бұрын

Glad it was helpful!

it sounds like English is not your native language and yet you done a better job explaining this than any other video, brilliant work, very detailed and clear.

@robojax

6 жыл бұрын

Thank you.

I bought a kit, but I was in trouble because there was only one sheet of manual, so this movie was helpful. Thank you.

@robojax

4 жыл бұрын

You are welcome. good to know you found it useful.

Thank you for the manual. Saved my life

@robojax

5 жыл бұрын

You are welcome. I am glad I did.

Thank You very much sir. That whose helpful.

@robojax

5 жыл бұрын

You are welcome. I am pleased you found it useful.

O MELHOR CONTINUA SENDO O DISPREY FRUORESCENTE , MELHOR QUE O LED .👍

You are wery good teacher.

@robojax

5 жыл бұрын

Thank you. I am glad you liked my method.

do you have any ideas on how to make the box or the place to make it look neat and the watch looks better to the eye, thank you, hope it's answered🙏🙏

Excellent video. I built one, carefully checked everything, but it only lights up and sounds the buzzer continuously. Pressing buttons has no effect. Any suggestions?

@robojax

3 жыл бұрын

Hello, so your alarm is triggered. I assume the setting is okay. there must be a pin touching other pin or the path of pCB are bad and there is connection. I can't think of anything else.

' i still have one C51 YSZ-4 clock kit with red light LED clock kit... very good

@robojax

6 жыл бұрын

Yes. it is very interesting kit. Thanks

how to set into 12hrs instead of 24hrs, any jumper?

thanku

@robojax

4 жыл бұрын

You are welcome.

I have the same kist but some segment on my seveb segment is not turning on is it the IC problem?

@robojax

7 ай бұрын

chekc the power line, solders and your battery. it could be so many things. the seven segment should not have issue. it is the signal or power that does not reach the display.

@S4EZCHOCO

7 ай бұрын

@@robojax i checked and everything is connected i also checked on buttons if i hold the left button it will beep and it will show what i think is the seconds and when the timer hit 8 seconds all of the segment lit up but when it resets to zero the zero is not showing like it should be zero but its missing a segment

thank my friend 7segmnt anode and kathode

Is there any website from we can buy that PCB

@robojax

6 жыл бұрын

you can buy the kit and because and I am not sure if you can get the PCB only . here is thelink on eBay www.ebay.ca/itm/172151689542

@elifmeray8998

6 жыл бұрын

Okh thanks for replying

how to change 12 hrs format...

@robojax

4 жыл бұрын

Here see this page and if you can update the firmware you can change it to 12 hour format github.com/ruthsarian/at89c2051_clock

sir, please your ic hex code.

@robojax

5 жыл бұрын

I don't you will ever be able to get it. Contact the manufacturer which we don't know who is. Here my LED clock using Arduino kzread.info/dash/bejne/o3ZkxtSCZZngd6g.html

All connections are well made but do not work.

@robojax

3 жыл бұрын

if they are all mad well, it should work. you must have done something wrong. either components are connected incorrectly or solder is not done properly. check soldering under magnifier.