What style of fitment do you think looks best? And oh yeah… we’re giving away a set of Air Lift Suspension. GO GET ENTERED!!! www.fitmentindustries.com/giveaway

@ucfian

2 жыл бұрын

poke on 80s-90s cars and flush/ tuck on modern

@cj7123

2 жыл бұрын

track fitment 💪

Flushed is what I've always aspired to. And no, not because I just got off the John, but because it was a big thing back in my high school days in '02; and looks good today.

@FitmentIndustries

2 жыл бұрын

Its a banger! 💥 I enjoy the flush style. -Edgar

@dysc.r6693

2 жыл бұрын

I like stance

I like when the roll of the fender follows the stretch of the tire, almost looking like an extension of the fender.

@gopherchucksgamingnstuff2263

2 жыл бұрын

Or lip to tip.

@FitmentIndustries

2 жыл бұрын

I’m a fan of the flush or tucked Fitment personally, helps when you’re on air. -Edgar

@gopherchucksgamingnstuff2263

2 жыл бұрын

@@FitmentIndustries Yeah, when I was Mini Truckin that was the way. But Hooning likes flush or poke. So, I am slammed with a slight poke and slight camber.

Literally on the toilet watching 😂

Just put on DR57s and went flush on 2021 STI...had to raise it up almost an inch to drive normally. 18x9.5 +38 is legit but you need to have about one finger gap to drive normally, especially with passengers. *Edit* if you camber very slightly as well it will keep you from rubbing on full turns and uturns

Poke with a stage 2 stretch👌🏽 thanks to Alex! Keep these vids coming!

@FitmentIndustries

2 жыл бұрын

🙏🏽🙏🏽🙏🏽 thanks for the support! -Edgar

I like the minimal poke look and the flush (more of a function guy but can see myself doing a show car when I can afford more than just a daily) but being in Germany and my daily I don't think I can do that on my '05 Fiesta ST150 Even flush might be hard as even on 7" wides with 45 offset and 195s I have something in the papers saying I might have to pull the fenders out a bit "bEcauSE sPAcE" Especially on the rears I don't know what they're talking about, with my current 6.5" 42 offset with 195s (winter wheels) there's space for days lol

@TrVlogs82

2 жыл бұрын

Yea agreed. I like the slight poke too. Trying to do that when I get my next car.

A couple mm of poke and a slight stretch to tuck the tire a bit is 👌👌. Keeps it functional but looks fire

I've got about 1mm poke, on a very slightly stretched tired. I love the look so much, very aggressive

@FitmentIndustries

2 жыл бұрын

Hell yeah fam! What wheels you running? Do you have your vehicle up on the gallery?! -Edgar www.fitmentindustries.com/add-wheel-offset

@Mekanik.b

2 жыл бұрын

@@FitmentIndustries Running Rotiform LAS-R 19×10 +25 with 255/35r19 tires 👌 looks good on stock ride hide but with just 1" lowering springs 🤌

Japanese tsuraichi, its basically slammed and flush, slight camber from lowering, fender to lip, and when you look at it from the front or back it looks flush 👌🏽

Tucked is ideal for daily driving and not rubbing

@FitmentIndustries

2 жыл бұрын

Agreed! -Edgar

@franchisefred4066

2 жыл бұрын

@@FitmentIndustries Not ideal for oil pans and exhaust systems 😂😂😂

@CoolGuy-ux5wx

Жыл бұрын

​@@franchisefred4066so true. Flushed is the most functional when its driven daily.

@tristand1243

Жыл бұрын

Tuck that! 😅

Definitely going to go the poked route on my fn2 type R. Thanks for the great vid!!!

@FitmentIndustries

2 жыл бұрын

Glad you found it helpful fam! 👏🏾👏🏾👏🏾 -Edgar

LOW = TUCKED FITMENT. FLUSH is really nice as well! Every other fitment doesn't really make sense to be honest, especially crazy camber and lip to fender...

@SLOCLMBR

2 жыл бұрын

Yea, I'm big on the tucked look..

Amazing video! Learned alot!

@FitmentIndustries

2 жыл бұрын

🙏🏽🙏🏽🙏🏽 glad we can help! -Edgar

I got the tucked fitment on my BMW E92 M3, looks super dope

@turbo9975

2 жыл бұрын

Let me get that daily

Both my benz were flush. 100% loved it. if I lowered it, I would've go tuck.

Wow! Thanks for that schooling. I have a 2012 mercedes cl550 and I added deeper lips 4" to the rear. The 295 tires were stretched way too much so I replaced them with 305's, now the stick out too much. Should I replace the inner barrels with a more shallow barrel to get that flush look, or what can I do to get em tucked back in. Thanks... I love your channel!

yay new fitment video

@FitmentIndustries

2 жыл бұрын

❤️

Solid 2022 update 👌🏼

Just got an e36 and looking to do a slightly lowered flush fitment.. I want it lowered but still functional

I really love this channel

@FitmentIndustries

Жыл бұрын

💙

I'm rocking a mild Polk fitment gotta get coils now..

I have been watching tone of your videos. Finally got a NC miata and am struggling to find a light wheel for the fresh flush fit.

@FitmentIndustries

2 жыл бұрын

Let’s gooo! 💪🏽 -Edgar

I got that subtle poke on my wrx :-)

I'm still wondering if I should go poked for a nice wide stance on my FA1 Civic or flush for my first mod on my car.

@FitmentIndustries

2 жыл бұрын

Depends if you’re comfortable risking a fender for your first try. Personally I’d go flush and then send it once you’re comfortable. 👀 -Edgar

I was thinking to do camber and low the car but no sure about the wheel what wheels will look better

I’m so blessed I was able to purchase the heritages off Dakota. 🙏🏼

@FitmentIndustries

2 жыл бұрын

AYEEEEE! Hell yeah homie! I hope you added that bad boy to the gallery. 👀👀👀 -Edgar

@BMSmouthers

2 жыл бұрын

@@FitmentIndustries I did! But I need to update it since I chanced a few things suspension wise.

Definitely did that with the Nacho Lunchable’s my dude.

@FitmentIndustries

2 жыл бұрын

We all did at one point 😂😂😂 -Edgar

thankfully the rear fenders on my passat came pre rolled from the factory, need to take a look at the fronts tho cuz once I fix my clutch and get a sound system in this bad boi I'm going lower!

@FitmentIndustries

2 жыл бұрын

Ayeee! Let us know if you need any help picking out some suspension! 🙏

Planning on getting wheels and tires from you guys! I'm going for a flush look! What would look good on mk7.5 GTI? hope you guys can help :)

@jhamildiaz8804

2 жыл бұрын

I thought about going for 19x8.5+45 and 225/35/r19 on some kw coilovers

@FitmentIndustries

2 жыл бұрын

👏👏👏 -Edgar

Nice Mac Miller Tattoos, Dakota. I have a swimming scubba diver on my leg as well.

I prefer the tuck set up meshed in with a slight rake

Got a bit of poke on my car went a half inch wider on the rims doesn’t look to bad

Sometimes a decent amount of poke can look good, for example a sh*tbox drift missle Bimmer with a decent amount of poke and some camber in the front can look super good.

I prefer making sleeper cars so I dont tend to do much other than lower it a little. I might do a slight poke style in the future though.

@FitmentIndustries

2 жыл бұрын

Sleepers are always fun to run into in the wild 😅😅😅 -Edgar

I had no idea it was called poke. I just called it track stance. All my cars are setup like that. I have it where my wheel is sunk into the tires so if for some reason I don’t see a curb the only thing that touches the curb is my sidewall and the rim is safe. The rim sits flush but the tires just poke out a little bit from the fender. Even my Escape is setup like that 😂

All styles of fitment are gorgeous if the entire build is done properly

@FitmentIndustries

2 жыл бұрын

💯💯💯 -Edgar

Hey man! Cross the TOTD off your list with me on my birthday on May 7th!

Poked and flush is so sick. I’m going for a poked setup but only a hair of poke. More flush. I like function over fashion. Slammed and cambered cars look like baby giraffes learning to walk😂

Got that flushed when aired up, natural tuck when aired out.

Aye was that River sanders wrx with the extreme poke 👀?

I love the poke! Lmfaooo.

That 1 speedbump:

I have a 2006 Lexus IS 250 AWD and I wanna go with RTX envy wheels 19” with 8.5 front and 9.5 rear. Would +38 offset fit flush? Tire size recommendation? I’m completely stock

@FitmentIndustries

2 жыл бұрын

Check out our gallery so you can get an idea fam! 🙏🏽🤘🏾-Edgar www.fitmentindustries.com/wheel-offset-gallery

You should do an update on types of car builds next

Can yall add mini trucks into the gallery. I know there is custom offsets but that's mostly lifted. Low trucks need love y'all

You can also pull and flare the fender to make room for more meats...but should be done right and that *maybe* also be easy to get fender-lip with regular width/offset unless you have to mess with control arms and axles and other stuff... Where's the hoopties that has huge 24" or 28" wheels and the car literally on top of all it? What would you call that fitment?

@FitmentIndustries

2 жыл бұрын

DONK! Haha, whole different animal right there. -Edgar

Im tryna be tucked i think it looks best, but they all look dope

@FitmentIndustries

2 жыл бұрын

Tucked fitment is my preferred 100% 💪💪💪 but they all are unique in their own way! -Edgar

Flush is beautiful. my poor front fenders but meats are art

Well blame it on my mini truck roots but im over here trying to tuck lug nuts 😆

@FitmentIndustries

2 жыл бұрын

Wooofff. 👏🏾👏🏾👏🏾 let’s goooo! -Edgar

Please do a video on the Nissan NX2000

I'm about that flush life

If I could own ever car they would all be FLUSH. Just my preference. Maybe even with a bit of poke.

So my 2022 mustang gt should be coming within the next month or so. Plan is to bag with some rotiforms 917. My question is what kind of offset would I be needing for a flush look? I wanna go with a staggered look 9.5x19 front 10.5x19 rear.

@FitmentIndustries

2 жыл бұрын

Have you taken a look at the gallery? 2021's should give you a good idea whether bagged or static, check it out! -Edgar www.fitmentindustries.com/wheel-offset-gallery?sort=yno&year=2021&make=Ford&model=Mustang&drive=RWD

@primofx2sport

2 жыл бұрын

@@FitmentIndustries bagged is the move.

@FitmentIndustries

2 жыл бұрын

Cant wait to see it! 💪💪💪 -Edgar

The lunchables was on point 😂

@FitmentIndustries

2 жыл бұрын

Still tasty to this day! Haha -Edgar

Do you think 18x9.5 +24 offset wheels with 255x35R18 tires would fit good on my stock oem 03 350z? Or would there be scrubbing?

@FitmentIndustries

2 жыл бұрын

255 sounds a little thicky in my opinion, however check out the gallery and you'll get an even better idea as to what people are running! Heres a link. - Edgar www.fitmentindustries.com/wheel-offset-gallery

Flush or Tucked most ideal for daily driving

do you guys offer your directional wheels where they all face towards the front or back?

@FitmentIndustries

2 жыл бұрын

They’re deco directional fam so they’ll all face the proper direction! 2 lefts 2 rights. -Edgar

Hey, what's the idea behind, and BTW what's the name of that thing when car is kind of lowering down almost to the ground (I guess while being parked)? I'm curious how and why it's done. Thanks

@FitmentIndustries

3 ай бұрын

Having air suspension

Which one looks better on a widebody? I’m leaning twords tucked just to have conservative wheel size but poke really fills out the over fender

@FitmentIndustries

2 жыл бұрын

I’d say flush to the overfenders honestly, poking I think would be a little mucha but do what you feel is best! 👏🏾👏🏾👏🏾- Edgar

@SLOCLMBR

2 жыл бұрын

Wide body kits were designed for bigger than stock tires, typically on a wider rim, to be flush with the flares.. it's a track car inspired thing that made it's way to the street

@DawudSeni

2 жыл бұрын

@@SLOCLMBR ima prolly do my best to be flush since poke on a widebody wouldn’t make sense anymore. It’s there to keep the wheels covered.

@SLOCLMBR

2 жыл бұрын

@@DawudSeni I personally think flush is a super clean look when done properly. It takes time and effort, so not everyone does it well..

Flush all day!

I got 19x9 (fronts) & 19x10 (Rears) on my static E90 on what fitment should I do? Tire sizes are as followed: Front-225/235/19 Rear-235/35/19

@ChieffinOnReefer

2 жыл бұрын

@fitmentindustries wait I needed advice😭😂

@TheRyansLion

2 жыл бұрын

@@ChieffinOnReefer go to their gallery and find out. It’s your car so make your own decision on what you think looks cool.

@ChieffinOnReefer

2 жыл бұрын

So I went with 225/35/19 in the front & 255/30 in the rear !

@ChieffinOnReefer

2 жыл бұрын

@@TheRyansLion gallery had weak specs & was 2 pages long 🤦🏽‍♂️so not many options.

I don’t get up off the toilet until the outro 🚽 🤣 💀

@FitmentIndustries

2 жыл бұрын

🤣🤣🤣 I was stuck in there replying to most of ya'll comments. -Edgar

@infadelakainf

2 жыл бұрын

@@FitmentIndustries best place in the whole entire house

Wow. I was literally on the toilet 🚽 😮 like fr. That segway..

@FitmentIndustries

2 жыл бұрын

Always hits different after a fresh one. 💩💩💩 -Edgar

can i put washers behind my lugnuts to push my wheel out a little bit ?

@FitmentIndustries

Жыл бұрын

I wouldn’t. Highly recommend spacers

Q, or confirmation for the guys in the know. I have used the fitment industries gallery, and want a functional, no rubbing poke + rolled fenders and mild stretch on a new set of wheels & tires. The car has coilovers that will drop the car by 0.5 - 2.5" with adjustable dampening. Is it possible to have enough ride height to run this setup without beating the crap out of my fenders on slightly rougher roads? Moreover, can I completely rely on the gallery for my first set of wheels, or should Iearn the math first? 👍

@FitmentIndustries

Жыл бұрын

You definitely can rely on the gallery! But also, shoot us a DM on IG and we can help as well!

Question I want to do a rim and tire deal from you guys but I don’t see anything for my 2019 HR-V it’s only for civic , accord etc

@FitmentIndustries

2 жыл бұрын

Check out our homies at SD Wheel! They have a variety of choices like us.🤘🏾🤘🏾🤘🏾-Edgar

@46GanG

2 жыл бұрын

@@FitmentIndustries yay thank you sir!!!

Just enough to close wheel gap is perf

Tiny poke to flush is my favorite

@FitmentIndustries

2 жыл бұрын

Depends for sure on the car 🙂 -Edgar

Yessssss flushhhhhhh finally

@thebattousai

2 жыл бұрын

It’s just perfect 👌😌

@FitmentIndustries

2 жыл бұрын

Agreed! 🤘🏾 -Edgar

If you have an AWD car, can you have wider tires in the back or not? Looking to put a widebody on my 99 eclipse GSX but I think the rear of the bodykit is wider than the front. 🤔

@roli710

2 жыл бұрын

Wider tires on the back are usually for rwd car and you won’t get any traction benefit like they would with a staggered set up

@FitmentIndustries

2 жыл бұрын

You can! But you may risk messing up your drivetrain if you are not within spec tire size. Make sure to look through our gallery and consult with any homies within the GSX groups/forums to be certain! -Edgar www.fitmentindustries.com/wheel-offset-gallery

i just wanna know when thos Anovia Trebles gonna drop

@FitmentIndustries

2 жыл бұрын

Soon 👀👀👀 Trust! -Edgar

flush set up for me

My favourite fitment is the undrivable.

@FitmentIndustries

2 жыл бұрын

Livin' life on the edgeeeee! -Edgar

Slight poke/mild stretch

Went to the gallery today and there’s a serious lack of r32s to go on. Callout those guys and demand they post on the gallery!!! I need help and references Lol

fitment on my car is just...idek lol. The wheels i have are wide af...front pokes...but my rear is tucked with like -4 camber...but it looks good imo.

@FitmentIndustries

2 жыл бұрын

If you like it thats what matters fam! 🤘🤘🤘 -Edgar

what type of fitment was that supra i want it

I prefer flush, my W213 is flush style, 20 inches SSR EX02 245/255!

@FitmentIndustries

2 жыл бұрын

Ayoooo, do you have that up in the gallery?! If not i would totally add it. 🙂 -Edgar www.fitmentindustries.com/wheel-offset-gallery?sort=yno

@eddiecheong8033

2 жыл бұрын

Okay, try to upload tomorrow.

I drove the Tail of the 🐲🐉 in January 2020 in my buddies Mini cooper, he was scaring the 💩 out of me and thought I was going to ☠ bc he had never driven any🗻⛰🏔's in his life, I was like move over !!! And within 5 mins of me driving he realized that he made the right decision in letting me drive. It was a 💥😎👍 cant wait to do it in my Z

Hey! You’re prolly on the toilet right now..” drops phone reaching for toilet paper.

Maybe you guys can answer this, why do modern factory alloy rims have no lip or are either flat or concave faced

@FitmentIndustries

2 жыл бұрын

I want to say cost efficiency honestly! -Edgar

7:08 GOOD GOD!

@FitmentIndustries

2 жыл бұрын

👀-Edgar

Air lift needs to make a kit for the 2021 Mazda 3 Turbo like asap!!!

@FitmentIndustries

2 жыл бұрын

I’m sure they’re updating! -Edgar

Love the channel but would love to have a car to even enter any of these contest....edit how could I drop the car without all the camber it's not my thing

@FitmentIndustries

2 жыл бұрын

Build one homie! Anything is possible. 🙌🙌🙌 -Edgar

I grew up racing. Motorcycles and cars as a kid and still today. So my choice is functional flush fitment. But I'll be honest, when I hop on IG and see some nutty wild stance cars or tucked bagged cars, I always throw them a like cuz I do think they are cool to look at. But that's just me I guess. Lol

@FitmentIndustries

2 жыл бұрын

We appreciate it! 👊 I have an appreciation for all the stances, but flush and tuck is my personal favorite. 🙂 -Edgar

Little Poke all the way

bum bum fender bacon fitment my style :)

Does widebody fall under fitment category?

@xL0stKIlah

2 жыл бұрын

Yea. Superpoke

Personally I like that he said your probably sitting in the toilet, I’m here like wai-WHa-How-d ya!?! LOL for that flush fitment

@FitmentIndustries

2 жыл бұрын

🌶🌶🌶🌶👏🏾 -Edgar

Gave a thumbs up for knowing I’m on the toilet

@FitmentIndustries

2 жыл бұрын

Ayeeeee hahaha -Edgar

Flush over everything

@FitmentIndustries

2 жыл бұрын

Gotta love it! -Edgar

Hella poke is for me mickey Thompson here I come

how can I just put spacers on the front ONLY?

@FitmentIndustries

2 жыл бұрын

Measure it out pending on what you want to do, search our gallery to get some ideas! -Edgar www.fitmentindustries.com/wheel-offset-gallery

How did they know I was on the toilet?! Damn!

@FitmentIndustries

2 жыл бұрын

Because they wanted to catch us while on a break! -Edgar

Isn’t 7:15 considered flushed?

That poke fitment where it's just a little is called mexiflush

i was, in-fact, on the toilet right now 🥴

I can confirm I am definitely sitting on the toilet right now.

@FitmentIndustries

2 жыл бұрын

Preach 🙏🏽🙏🏽🙏🏽 a lot of us where. 😂 -Edgar

Am I tripping or did they change their wheel name brand from Artista to Enovia? Just curious

@FitmentIndustries

2 жыл бұрын

We did! We evolved and went Anovia. Artisa is our deco directional line of wheels. Stay tuned! -Edgar