Glad someone else sees it like I do. I'm getting older and those "on the ground" Adirondack Chairs are a pain to get out of. Anyone with arthritis or other medical conditions would likely agree. I think your revision is the way to go. Oddly enough I had modified a set of traditional plans and printed out the layout sheets but not yet build something very similar to yours. Thanks for posting this video. Guess I need to get back into the shop and make a pair of the updated version!

I grew up in the Adirondacks, I have missing context to the Adirondack chair. They were designed to sit facing a mountain pond or lake on a slope. Set one of these babys up looking down a hill and you'll get it

@Mark.AW1962

3 ай бұрын

Now it makes sense! Thanks 😊

@MarcPawlowsky

Ай бұрын

I have known this forever, but other than trips in the Adirondacks I always see these chairs on level surfaces. I don't get why they are so popular given their misuse. On a hill, they are fantastic.

The cut off angles for clamping is BRILLIANT!

That is exactly how my wife wants me to build some. She hates getting out of the traditional one. One thing she wants to keep is the curved back. This was a great video

I think for me, I'd like a compromise with the angle. Not as steep as a typical chair but a little more than what you made. Very nice work!

@sbffsbrarbrr

Жыл бұрын

Yes, the chair looks great but it's not an adirondack anymore.

@yaowsers77

Жыл бұрын

@@sbffsbrarbrr oh I get it. That's fine. Haha I just like the design but with just a bit more of an angle is all.

@mrow7598

Жыл бұрын

I was thinking the same thing the Adirondack is more of an outdoor recliner than a chair. But he's right for people who are big its tough to get in and out of one so low to the ground.

@Fixthisbuildthat

Жыл бұрын

yeah, I think that'd be a good idea

I feel the same way! I hate sitting on (in) them. But people love them. I think they get that idealistic picture in their heads of sitting on a mountainside with a beautiful view, holding hands with their love.... Romantic, right? Well, at 61 years old, I'll build and offer your version any day. I bet they will sell 1 for 1 with the traditional Adirondacks. Imo Great job!

I built a couple Adirondack chairs but made them rockers. To get out, simply rock forward. They were a big hit.

I like the tip of saving the offcuts of different degrees for glue ups. Smart!

I thought I was the only one who hated how these chairs sink you into the center of the earth. Great job👏I'm adding it to the list of projects

great tip on keeping angles offcuts with sandpaper attached! i'm "borrowing" that one for sure! one reason i love watching videos like this, especially when mistakes are made. best way to learn. thanks for the great vids :)

Terrific build Brad! I totally agree with you about those low to the ground Adirondack chairs! They are really & literally a big pain in the butt! 😉😉👍👍

Hey Brad, Excellent build! One thing I did when I made my Adirondack chairs was to make the back rounded so it more follows the contour of your back. Just a thought...😅

I’ve thought about a modification like this for years. Thanks for actually doing it!

FINALLY, SOMEONE UNDERSTANDS BAD KNEES!!! THANK YOU!!!

Great build I totally agree never liked Adirondack chairs could never get out of them so this is a great idea thanks for sharing Brad

Just finished my first one yesterday - only one I’ve attempted - this is not my favorite piece of furniture- but it’s surprisingly comfortable- I kinda like that it sets close to the ground because enough time in it and imma be drinkin- won’t be as far to fall

I agree, I hate that low sitting crap. Makes it hard to get out, no matter who you are.

As someone who lives in BC's coastal rainforest and whose father spends much of his time building trails, I can promise you that cedar is not rotting out on you any time soon. My dad's been using cedar for trail construction for years and even unfinished raw-split wood that gets put in the dirt is just fine years later. And this is wood that is sourced by finding random fallen cedar trees out in the wild that didn't get hauled off by loggers, chainsawing a chunk out of them and splitting them in a process not unlike cutting firewood. Some of that wood has made its way to his workshop, and the only reason the stuff he's planed out can't be sold as tonewood for guitars (his original plan) is that there's some environmental certification needed to do that, and "random BC man carved it out of a dead tree in the wilderness" does not qualify for that certification.

SOLD OUT, THANK YOU! ** Get the Premier Compact Router Bit Set ** ONLY 100 Available Pick up some Plans instead fixthisbuildthat.com/plans

@MANSHED

Жыл бұрын

I just ordered the router bit set! Perfect set of 4 bits. Now I can be cool 😎 like you Brad. 😂 Order #1701

@metodemersic

Жыл бұрын

Wow, router set. Very nice. But is it just me or are too many people ordering it? Cause the site is down... So I guess, 100 won't be enough. Heck, 1000 probably won't do either.

@bigwillysgarage2301

Жыл бұрын

Are they Astro coated ??

Great project enjoyed the video. It’s also great to see your personal side. I think this is the first video I’ve seen with your whole family. Wonderful looking family, gives me hope.

I have been looking for plans for this chair. Thank you! A curved back would be great.

@link-bt4zz

11 ай бұрын

Do you find the design of this chair？

Literally working on designing one that can sit upright and this is way better of a design. Awesome stuff as always

I know this is an older video of yours (nearly a year old). I'm an older guy and my wife and I will never be able to sit in a low adirondack chair. Your build is perfect for us. I went to your site ready to buy the plans.... and to my dismay, there aren't any?!?! I'm gutted. I was really excited to finally make my first 'real' woodworking build. It's a shame you never posted the plans.

Very interesting and inspirational video. Your modern rendition of a Adirondack chair is gorgeous. Your videos in general are very informative and your approach makes extremely fun and inspiring to watch, please keep them coming.

Perfect summation of the traditional chair. Brilliant redo. Make 8 chairs: 4 for inside and 4 for outside. Finish the indoor set with a matching dining table and you have arrived.

Looking forward to getting some plans for this build!! I want to make one for myself!!

Great looking chair, Brad~! I may have to build a few of those for our deck. Yeah, not getting any younger here and the higher seat height looks like a great feature. Thanks~!

Looking forward to the plans. Feel the same way, too hard to get out of.

“It was stinky.” - Nacho 🤣👍✨

FINALLY! An Adirondack chair worth sitting in!

Great job thanks for sharing, looking forward to buying the plans.

Great chair!!! Never liked laying down in them. Lol. Gonna have to get the plans and build a few!!

I completely agree with you about Adirondack chairs. Never been a fan. However, I did purchase a "bistro set that had a bar height table and stools in Adirondack style that I love.

STRONGER MOD: Use half-lap joints for the stretchers to the tops of the legs. Likewise some dadoes for the side spreaders to the sides of the seat...stronger. Ease the lower edges of the seat slats, so they can be closer together and less chance of pinching, or a button catching in them. This will also allow for better drainage and drying of the slats when they get wet. You can depend on leaves/pine needles/dirt getting in there and clogging... Of course, ease all edges with round-overs...gotta be nice to the touch, prevent possible splinters. Suggest you cut the corbels at a 45 degree angle, as they way they sit per your build they are liable to split along that vertical grain. Screw them in at that 45 degree angle for strength. Why? BECAUSE SOMEONE (ahem) will sit on those arm rests. Excellent plans.

YES! I have the same opinion about the adirondack chair as you do! I like your design MUCH better.

Really looking forward to these plans. Great Looking Chair.

Fantastic work, Brad! Really beautiful chair!!! 😃 I need to build some as well!!! Stay safe there with your family! 🖖😊

@Fixthisbuildthat

Жыл бұрын

thanks, MC!

I agree with y ou about the seat height and angle. But the pattern I use had a curved back that I think is much more comfortable.

Great twist on the typical Adirondack chair. Like you, i and i bet many other people do not like the step incline of them so this will be a great option

I loved your idea and watching you complete it was awesome. I never like the way Adirondack chairs were designed and me being overweight made it almost impossible to get in or out of them. Now watching a person who is a normal weight having the same problems makes me happy to know it wasn't just me and my weight. Beautiful work with a great outcome. I'd buy those chairs anytime and enjoy them.

Nice design and build of the chair. Stay safe.

12:50 “I don’t EAT coffee” ☕️ 😂

@Fixthisbuildthat

Жыл бұрын

i mean honestly I don't, lol

Great new take on a classic Brad. Hope Chuck likes his new chair.

Great build. You should start a "My Take" series where you rethink ordinary builds and give it your interpretation and design

Couldn’t agree more about not “liking” the experience of sitting/getting out of Adirondack chairs, but I do think they’re cool to look at. We have two that are just yard sculpture-no one will or wants to sit in them!! 😜

@Fixthisbuildthat

Жыл бұрын

yes, they do "look" cool 😂

@subn0rma1

Жыл бұрын

@@Fixthisbuildthat It's a great place to sit your drunk friends if you don't want to have to worry about them until they sober up. It's like a drunk-person-immobilizer

@datadev1

Жыл бұрын

Particularly if you are an octogenarian.

Love it, great adaptation. More practical too

Rounded back is the way to go. Nice build!

I totally share your not love of an Adirondack. LOVE your new version! 😊

You read my mind!! I’ve always wanted a chair like this but I hated the idea of not every guest being able to use it. I do basic woodworking and I might actually have to attempt this!

@Fixthisbuildthat

Жыл бұрын

It's fairly straightforward, you can do it!

That gulp and ahhhh at the end was so satisfying . :D

Great video! I was just wondering when will the plans be available? Thanks so much for your time

Cool chair and loving the new shirt; ordering one this week. Beautiful fam as well!

I agree that those chairs sit way too low. I love the upgrade you made to the design. Might think of making myself some. Thanks for sharing.

Looks like a perfect chair! Well done

i use Sticky Stuff 3 on all my glue-ups, even on interior projects, b/c it has the longest open time of all the Sticky Stuff variants, and that takes a lot of stress out of glue-ups for me. Sticky Stuff 3 for the win!

Thank you so much for the re-design! I can't stand traditional Adirondack chair because I can't get out of them. I'm saving this one!

Thank you, I have a friend with bad knees. This will be perfect for both of use!

Thanks for doing a project with table saw splitter and blade guide

Yes, I love it! As difficult as an Adirondack chair is to get up from even when you're in good health, this version seems so much more disability friendly.

@Fixthisbuildthat

Жыл бұрын

Yeah, those adirondacks are a pain!

Fix This, Build Thatirondack Chair. Nice as always.

Happy to see you using the blade guard😊

I love the idea about the off cuts!

@Fixthisbuildthat

Жыл бұрын

works great!

Chuck is back!!! WhooHoo!!!

Absolutely love the design of the Bradirondack Chair. Another awesome project!!! 👍🏼 😉

Love your chair!! I can' get out of the regular Adirondack chairs.

Love the design! The way you've demonstrated the build, on the video, I think even a novice like me could have a go at builing these chairs. I did, however, have a.hard tme finding the plans on your site. Could you provide a little direction? Thanks for the great content!

I grew up in the north east and I’ve always hated how Adirondack chairs are shaped. This is a severe improvement. I’ve been wanting to make one similar to what you came up with for a while now. It might be time.

Your OCD attention to detail like wanting the slats all drilled in the exact same spot makes my OCD very happy 🤣

Beautiful build!! 😍😍

@Fixthisbuildthat

Жыл бұрын

Thank you!! 😊

Please let us know when you post or make available plans for you Adirondack chairs. Thank you. Plus the chairs look great and much more practiable

I thought I was the only one who thought Adirondack Chairs sat too low to the ground. I remodeled and built my own version too. In fact, your version is very similar to mine the only difference is I made my back support adjustable. I had the same leg construction as yours. Great job on your upscaled version, it looks great.

Great build, likes nice and comfortable

Genius adaption!

Maybe it’s just me but I’m always happy for woodworkers when they are able to buy a festool product. Yes they’re expensive but they are extremely accurate and efficient.

If you ever revisit or need more chairs, you might consider a slight curve into the backrest for cheek comfort(might get a bit numb you sit down for long enough). Maybe also add slat for lumbar support. But regardless, I think it turned out great. PS: As a 6' 5" individual, I never really had difficulty with those chairs 😅, is this a common issue?

@dinacusic7829

Жыл бұрын

You must be young still 😂 it's an issue when you get old

@hadensnodgrass3472

Жыл бұрын

@dinacusic7829 You might be right, I am 28. I hear around 35 is when you start waking up with random pain in your back. Can't say I am looking forward to it. 😅

@scottsatterthwaite4073

11 ай бұрын

@@hadensnodgrass3472 Let's put it this way: I have back pain older than you. Once you hit 50, it will really catch up with you.

Your next project should be a collaboration with a more geeky channel. Make an Adirondack chair that uses some stepper motors and ball screws to lift the seat and help get you out. Then you have the loungeiness with ease of use!

@bmacaulay18

Жыл бұрын

Do that with Colin Furze. Then add wheels and a rocket! 🤣😂🤣😂🤣

Hi Brad, this is the first time I have watched you, great format and you seem like a really nice guy with great kids and wife I hope it all works out for you. Cheers T

@Fixthisbuildthat

Жыл бұрын

thanks!

The best part of a Adirondack chair is falling into it. The lounging part. What you made (be it a very nice) is a chair. A nice regular chair.

Ok. Brad.. I usually don’t comment things like “you should have” or “you need to” however, I consider you a friend, so I’m gonna go ahead and say it. Switch to zero man!! Diet Mountain Dew is good. But Mountain Dew zero is amazing. That is all. Nice chair by the way.!

@Fixthisbuildthat

Жыл бұрын

I tried Zero and I didn't like it. Diet has that bite that I love. But I'll do Zero in a pinch. Thanks for looking out for me, Chris 😂😂

Love the build concept! Pretty sure we lost a friend to a Adirondack chair... never heard from him since he fell in. Quick question on joinery: Why do the legs with biscuits and screws on the other parts?

No, you didn't build a better Adirondack chair because you didn't build an Adirondack chair. You just built a chair.

Great project!

"Why is it taped?" "DONT WORRY ABOUT IT." 😂😂😂😂

@Fixthisbuildthat

Жыл бұрын

kids ask too many questions

Love that post sip "ahh"!

Did exactly this some time ago. I can adapt my chairs to the person the chair is for.

Good sir, if your drill press is taller than you are, it is not little. ;-) I snickered at that one... Thank you for the ideas! I especially liked the clamping cauls at various degrees depending on what was needed. Everyone else voiced my opinion on the general aggravation that is a traditional adirondack chair, as well as the fresh air that is your version of said monstrosity. Well done!

If you look at the angle of the Adirondack chair, you might see it was the early version of a zero gravity chairs popular now. The chair you built is well done, but also good for interrogation or some Victorian punishment. 😎 Cheers.

Great chair Brad !!! 👍👍👍👍👍 Five Outta Five !!!!!

@Fixthisbuildthat

Жыл бұрын

thanks, brother!

Love this channel, following your Shed build. Any idea when the plans will be available for this chair. I really like the design and would love to try to build some, and don't see them on your website yet.

Raised seat, good idea. Should've gone for the curved back though.

Awsome content as usual!

Awesome video Brad!

@Fixthisbuildthat

Жыл бұрын

thanks!

Nice video Brad!

Great chair. I can't sit in Adirondack ones, they're too low and I have back and knee issues. This would be a great alternative.

Out of curiosity, would the lower down chair have been better if there was room to slightly put your feet further beneath you when standing? In the toddler room, where I work, when I stand from their chairs, I bring my heels behind my knees, plant my feet and stand. Those chairs are about 5 inches off the ground, but it's definitely easier with the ones 8 inches off the ground. Just curious if that could be a factor as well

Yus!!! I HATE how low the Adirondack chairs are for my somewhat larger 6’2” frame. This looks great.😊

Now you need to make one that has an adjustable back rest. That'll make it pefect!

Love the video and am very sorry I missed out on the bit offer.I tried to find these chair plans on your site and it said no results found. Can you help me out where to get the plans? Thanks!

Awesome!

Very cool and fun build. Did you ever get plans or a cut list?