Will pray for Mr. Ernest. I remember him. God’s Blessings and Mercy!!!

Risk ain’t worth printing beautiful images. More to life. All money ain’t good money

Brother Wade, thank you for emphasizing this issue. The warnings are real and we’re not taking this serious. Please let’s be cautious and protect ourselves and those around us. Many of us do DTF IN OUR HOMES! And around our family. Prayers for Ernest.

Thank you for being honest. I am glad you were brave enough to publicly speak facts. I am one that held off purchasing a dtf printer and chose a white toner. I’m a nurse and we cannot use baby powder or any talc on our patients. Inhaling baby powder can be harmful so imagine this toxic powder. I’m holding off until these printers have improved user protections . Until then, I’ll have a company make transfers for me.

@adubbproductions

4 ай бұрын

Makes sense. Thanks for watching.

Thanks for sharing...I'm lost for words. Praying for Me Earnest!

Thank you for your honesty! 🙏🙏🙏for Brother Earl and you.

Thank you for sharing this important information. I pray that brother Ernest is able to recover from this illness. It’s so sad. 😞

I worked for a textile company in the office for many years and everyone there ended up with Cancer, most died including my sister in law whom I worked with for over ten years. Brother Earnest my prayers are with you 🙏❤️

@adubbproductions

12 күн бұрын

That is very unfortunate and sad to hear.

Thankyou Allen, Health and Safety is the 1st thing in life and Industrie, Nice to hear you hear you are sharing it! My thoughts are with Brorher Ernest! Bless you.

Thank you for sharing this vital information! I have been on the fence about DTF for a long time and this just confirmed that if it wasn’t sitting well with my spirit I was making the right decision to wait. I pray for Brother Ernest’s healing and recovery. And I pray for everyone else still willing to produce DTF prints! Godspeed to all!🙏🏾

Thank for bringing this awareness to our Community, I shared this out 🙏🏾Blessings to you 💙

Praying for him, thank you for this video.

Thank you for sharing this is a huge blessing for many I also watch the video with you and Katrina speaking a little bit about the cancer this is a much-needed video I am a lung cancer survivor stage 3A the walking miracle never smoked cancer was before I started crafting I have not done DTF but thank you so kindly God bless you

Thank you very very much. This surely must be dangerous for someone who suffers from Asthma. Your filming this is very educational. No one wants to get sick from printing any type of garment. Than you very much sir

I’m so glad I saw this, I have a DTF shaker & oven combo & I get a headache every time I use it. I will definitely wear proper ppe going forward 🙏🏾

Thank you for sharing. Just bought a small system and was thinking this as I have been setting up. It such that I just bought into it but I won’t be continuing. Your video just confirmed my fears. ❤

Thanks for the info and I have ordered my PPE cause my system will be here soon. Prayers to Ernest.

Thank you so much for sharing this information. I saw brother Ernest video. I feel just awful for him.. be safe!!

Lord have mercy for brother Ernest🙏🏽Thank you!! Good information ! You can do my my Class reunion shirts🥹

Thank you for sharing this video and prayers to him for his speedy recovery for now on I’m going to cure my sheets outside and with a mask on

Wow. I bought my xp15000 about a year ago. Never converted it but was planning to do so this coming week. Thanks for the awareness. Hope homeboy is able to recover somehow

WOW thank you. I just ordered supplies for DTF. Now I'm wondering which way to go

Brother Wade... thanks for sounding the Alarm, it's time to take precautions! Truly appreciate all you do.

@adubbproductions

4 ай бұрын

No problem. Now we know.

@mauricioherrera7731

3 ай бұрын

I always knew even the package has a warning label but it took it lately. Thank you for opening up my eyes with video. I be following you for quite a while. I appreciate what you do. Be safe out there one love.

I have been followin you for a while, in the beginnin of your dtf journey you just like others did not do anything but turn the machine on and let it work so hopefully everyone watches the changes your gonna make now and follow your guidance, my words are if you (VENT ITS NOT MEANT) for me personally. sometimes the search for money can be dangerous, but thank you for the awareness video

after screen printing for years with spray adhesive . I started working with resin, and I wore, gloves, eyeglasses and masks plus had ventilation. At work we ventilated our laser, and had air cleaners, but never vented our dtf but will do it this week. Thx for the help

Thank you for sharing this information I would have never known the DTF is toxic

ALLEN! Brother I have literally been putting off buying DTF equipment because of your warnings and thoughts on what the fumes and powders may cause without the proper setup/equipment. These talks are especially important when DTF is being pushed EVERYWHERE on TikTok and other socials right now. I really appreciate your videos and Insight on anything business. Keep up the great work 🫡

Thanks for sharing

thank you Allan .

@adubbproductions

4 ай бұрын

No problem but make sure to go thank Brother Ernest for putting it out there. He’s saving us all.

Thanks for sharing this information. A lot of us crafters have tried dtf hacks in the home where our pets also reside. If your pets are like mine, wherever I am they are. Make sure they're not around when using dtf powder also. I know 1st hand that dogs can get just about every illness we do. I just lost one of mine to cancer last Nov. Praying for Brother Earnest.

That makes a lot of sense. Any powder or fumes you breathe is harmful to your lungs, don't discard sublimation. Thanks for sharing ❤️

@adubbproductions

4 ай бұрын

It's my duty as an influencer. The good and the bad especially if it's life threatening.

@elainecongo3827

3 ай бұрын

They really need to wear a RESPERIATOR when they work. My Dad died at 42 with Cancer breathing in fumes from chemicals...Ya'll it's no joke messing with these chemicals..Alot of these companies know they are dealing with chemicals and it's not until folks get sick and die then they put a warning on the product

I’ve just been pouring and handling the DTF powder not knowing this. Thankyou I got gloves now and I’m getting a respirator tomorrow along with goggles

Thanks for the information. Just sealed the deal for me to NOT invest in the DTF equipment.

Stay safe and thank you so much Amen…I’m glad I got on KZread it was meant because I really wanted one, so I say it was meant for me to see this 😮thanks A-Dubb ❤much love… I think I’ll wait till I have a warehouse I’m working in one of my bedroom 😊

@adubbproductions

4 ай бұрын

Yea. I wouldn’t put it in my house. Maybe a garage but not my living space.

@feliciaelston8966

3 ай бұрын

@@adubbproductions prayers for Mr. Ernest

Thanks Alan and Brother Earnest for bringing this to light. If you can't be 100% safe, buy your transfers or consider alternative methods (White Toner, DTG, Sublimation, Screen Printing, etc)

@adubbproductions

4 ай бұрын

Yup, protect yourself or go the white toner route.

The idea of an exhaust fan is a great idea. Maybe looking into a supplier of auto repair supplies can provide you with recommendations for a powerful fan to extract fumes and powder particles.

Thanks for sharing, I was one of the first to see Brother E's video. Very sad. Pressing transfers (pre made) seems fine though (especially if Oeko tex powder and ink). I'll still wear respirator even when pressing

Where the DTF powder is a Polyurethane TPU in general its non toxic, but the fumes when heated at a certain temp usually above 250C can be toxic, but so can your inks and film as well. So the key point in all of this is, stay safe and have more than adequate ventilation and extraction systems in place and exactly what Alan said proper ppe when handling powder and fumes, I will be following suite and discussing this as well in my next video ... Alan thanks for the video and neutral stance you took.

OMG Ernest was a guy that convinced me to not go down the path of DTF when I first started. Mainly because it was such a PITA with clogging. It gave me the flashbacks of the PTSD I have from my old Epson 4900 photo printer clogging constantly and costing big $$$$. Man what a bummer on DTF. I don't think I will even offer it now to not take advantage of you guys that are making it.

Appreciate you ❤

Stir it up man! That is crazy. And sad.

Also look into buying and installing an exhaust fan, it will help tremendously folks

as long as proper measures are taken should be ok, like you said always exposed to something.

🤔🤔hmmmmm? Just got my machine, this is serious, thank you so so much. I wish bro Earnest speedy recovery.

@adubbproductions

4 ай бұрын

Eye wear and a mask for you when dealing with the power.

@mineh7502

4 ай бұрын

Thank you so much, may God bless you and protect us .There is need to adjust on how the powder is being used.

this is exactly why i have not gotten into DTF, i've always been afraid of that whole powder thing.

When i use the powder to make transfers.i go outside to make transfers...was thinking about getting a dtf machine... I think i will wait now... The fumes from a heat press gotta be bad also.... I see the funes like 2nd hand smoke from a cigarette... I can see steam sometimes while heat pressing. Since we started tiktok shop, we have been using dtf transfers because of the 3 day time frame.. Thanks for the information.. God bless mr earnest....

Thanks for sharing. Allan, should we be equally concerned and cautious with pressing sublimation?

tragic information. thank you for sharing 🙏

great video warning people! But just a heads up if you want to keep working with this stuff you have to shave your beard bro. I worked with toxic thermoset resins in my 20s and NYC health dept required us to be clean shaven to wear the fitted HEPA masks. When you think about it it makes sense: when your beard is separating the mask rubber to your face the beard becomes an easier path for fumes are particles to pass through than the HEPA filter. For those that wouldn't shave they offered the full head hazmat bag that your entire head goes in connected to an air tube. Great channel btw!

@adubbproductions

4 ай бұрын

Makes perfect sense. So much to think about. Thank you. Definitely makes sense.

Thank, thought about doing DRT., but don't have the space. You take care of your body.😊

I can see major reprecussions if emplyees are not protected and something goes wrong, not worth it unless things change

Geez. Glad I didn't jump. I'll stick with embroidery and HTV. Thanks for this.

Thanks for the info and my prayers go out to Brother Earl. I just ordered an Epson 7880 printer to use for DFT. I will be using the protection gear you suggested and using the powder outside ONLY. Any suggestions on moving fwd with this printer? Thanks and keep up the GREAT work.

that was a sad video, I feel so bad for him, I am gonna be protected from now on

@adubbproductions

4 ай бұрын

You have to. Now we know better. Just protect yourself.

Thank you for this video, got me thinking now is there any health risk or powder that comes from with a DTG?

So happy I saw this when I did woah

TFS!

I enjoy ordering transfers, and rarely do the DTF hack right next to the door that leads into my garage. I have that door open when I’m pressing sublimation designs. If dust particles get on my desk, I clean it up. You can’t see it, but it gets there in the air. I take it seriously.

@adubbproductions

4 ай бұрын

100 percent.

This is scary. Thank you for posting this I was just saying earlier today that I wanted to get a DTF printer, I’m good. Prayers to Brother Ernest 😞🙏🏽

Thank you for this. I'm from Kenya and about to get my first DTF printer. I will take precautions.

@adubbproductions

4 ай бұрын

Good. Forward the video so others know.

I was planning on getting a dtf printer and i am lucky i came across this video before getting it. Not sure if i'll he getting it now after watching this.

@adubbproductions

4 ай бұрын

Wear the right equipment or just buy transfers.

@hotzauhse

4 ай бұрын

​@@adubbproductions i use my press on my basement so i'd rather find an alternative or stick to just transfers.

I think the suit go over your clothes. I ordered a couple of them when Covid started. I ordered the whole set like you have purchased.

HTV may be old but the safest 🤷🏾‍♂️ thanks for sharing tho’

What about the printed dtf transfers?

Thank you for the information, eye opening

If you use these outside in your garage how hard core would you still be?

How about the ones who purchase from a supplier and press on the shirts to sell? Should we be concerned?

Prayer for him. Currently, there are no studies or cases indicating that DTF powder can cause cancer, at least within the knowledge of the DTF community and industry. However, this does not mean you should neglect safety precautions. It has been repeatedly advised to wear gloves, use masks, work in well-ventilated areas, or use fume extractors when working with DTF, DTG, Sublimation or any other method. Any product that produces fumes requires protective measures, not just DTF. Failing to take these precautions is done at one's own risk, similar to how long-term smokers risk lung cancer, how firefighters risk inhaling harmful smoke or everyday items, including processed foods containing toxins, pose health risks. When a certified doctor publishes a case study on this matter, the DTF community will evaluate the findings, and factories will likely need to implement big changes. For now, in my opinion, there is no need for panic. The key is understanding how to work safely and ensuring you are adequately protected.

DANG!! this is scary, i been using dtf in my home for a year now and maybe its time to do em outside. Lord protect us all who is trying to make a living.

@adubbproductions

4 ай бұрын

I think you are fine. Just change things up a little now that we know. Wear a mask and eye protection that’s all. Remember that powder gets airborne and can travel all over the house. Keep it in one room or in the garage with the door closed.

Can you get cancer from the prints when we press them? Praying Mr.Ernest pulls through this is crazy!!

@adubbproductions

4 ай бұрын

I doubt it. You’d probably have to directly and purposely sniff them. I doubt it but who knows. We can get cancer from second hand smoke apparently so… probably.

Thanks for the info. I don't have the machine but use the powder and sheets. Will use outside with all the attire you have suggested. Thank you.

@adubbproductions

4 ай бұрын

For sure. Be safe.

I have a question is dtg better since it doesn't involve powder/oven thank you

glad I never bought a DTF machine . I did buy some film and powder ive done some prints ut im cool . im tossing it or see if I can return the stuff amazon .

@adubbproductions

4 ай бұрын

Protect yourself correctly or toss it.

*This has been the Pink Elephant in the Room Taboo Topic you Do No Talk about!!!*

@adubbproductions

4 ай бұрын

Right. That awkward conversation that every company selling the stuff doesn’t know how to answer.

@Ricks2Cents

4 ай бұрын

@@adubbproductions *You mean Avoids to Answer. Big Difference.*

Same thing with epoxy. Take extra Precautions

I just got my xp 15000, I was going to use the powder outside with a respirator on. Should I also print and transfer outside? I don't have a garage.

That really sucks, I wonder how it effects you when your printing them?

Is it Toxic in evaporated form only or is it like Asbestos in a way that touching it after its on the design can cause illness ?

So, are the transfers safe when pressing.

@DM-vh4nb

3 ай бұрын

I don’t trust them at all. Until the right agency investigates, I would not trust them. Heat pressing this stuff may also cause cancer because of the fumes you breathe in, especially in a not well ventilated bedroom.

SO is this only when you are printing this stuff or can it also be harmful when doing the hack using the powder ?

If you got to do all that to print I’m good! So if the powder is in the image after it heat does it seep out into our skin if we sweat?? Or does it dissolve after you heat press onto the garment???

@adubbproductions

3 ай бұрын

The powder isn’t powder anymore. once the heat melts onto the film. It isn’t for everyone but there are far more dangerous professions out here. Not so dangerous if people wear the proper protection.

I only did it once i threw the powder into the trash. Will never use it again.i will buy transfers if i need them. I do sublimation much safer

So we shouldn't do the DTF back?

I just started using DTF powder, bought from Amazon, I do the hack where I use my epson printer that I converted to sublimation and I used the powder maybe 5/6 times without goggles or mask. Am I at risk? My eyes are red and irritated and I know for a fact that it’s from that.. I’m just worried about my lungs now

Question? If it’s this potent, wouldn’t the shirts that’s being made from it have it on them as well? Not well informed on it.

@adubbproductions

4 ай бұрын

No. Brother Ernest and his doctor determined his Cancer stemmed from dtf powder. Once the powder is baked and turned into the jel like adhesive in the film it’s not powder any more and it’s not powder floating in the atmosphere. I would advise watching his video and listen to what he is saying to get some clarity.

My husband purchased the same mask for me about 2 years ago when I got my DTF. He’s a retired firefighter and has seen the good, bad and the ugly. I’m so sorry about Brother Earl. Thank you so much for sharing the video.

@adubbproductions

4 ай бұрын

Crazy times. Thanks for watching.

would this also apply to UV printing or sublimation ?

@adubbproductions

4 ай бұрын

I don’t know the guy said he got cancer from the dtf powder he did not mention UV printing or sublimation. I have not heard or seen anyone one say anything about those methods. This is strictly about dtf powder. Any other method will have do be researched.

Now do you need to use the dtf powder for your business? Just wondering because i was getting ready to make a purchase for the screensheets bundle which includes the ink and the dtf powder added to it?

@adubbproductions

Ай бұрын

I use it almost everyday.

Bro get the full face respirator

Thank you for your informative video. It's 13 years since I've been working in the print industry. I've never seen any labels on my CMYK toners. Not one. But today I read this one. ⚠️ WARNING: This product can expose you to chemical including styrene, which is known to the State of California to cause cancer.

@adubbproductions

3 ай бұрын

Insane. Be safe my friend.

That's so sad :-( just watch out for dust under machines etc building up then you open a window and that becomes air born etc while you are not wearing the protective gear. Also what about if your ordering dtf transfers from a company but you press the design onto the shirts at home do I still need to wear a mask and gloves? or at this point there is no danger because it's gone through a process already?

@adubbproductions

3 ай бұрын

Pressing transfers is not a problem. Making them is not a problem either as long as you protect yourself.

@chrisleavers9853

3 ай бұрын

@@adubbproductions Thank you for the reply :-)

Just order DTF prints. Is the ROI on owning, maintaining, the required PPE, selling prints worth the health risk?

@adubbproductions

4 ай бұрын

For me yes. I just want people to be aware of what could happen if they don’t take the necessary precautions. It’s not for everyone. I don’t have an issue with hazardous conditions. As long as I have the proper gear im mine.

Is there a risk to buying dtf hang sheets and pressing them at home?

@adubbproductions

3 ай бұрын

No one knows but I highly doubt it. Pressing DTFs is probably safer than second hand smoke or smelling house hold cleaning agents but…. We do not know for sure. No one knows.

Is it only dangerous when making the DTF or do you need to be careful when you're applying it to a shirt also

@adubbproductions

4 ай бұрын

Only when making the transfer. As far as we know.

What about Dtg?

Do you oeko-tex your products to check their safety?

@adubbproductions

Ай бұрын

No. Don’t know what that is. What is that?

@andreadingmann6762

Ай бұрын

@@adubbproductions OEKO-Tex® is an independent certification system that tests and certifies textiles and accessories at all stages of production. OEKO-Tex® certified heat transfers are tested for harmful substances and are guaranteed to be free from harmful substances. This includes substances that are not yet regulated by law but are known to be harmful. OEKO-Tex® certified heat transfers are tested for more than 100 different substances, including harmful chemicals, allergenic dyes, and heavy metals. This certification system is widely recognized and respected in the textile industry, and OEKO-Tex® certified products are considered to be of high quality.

Is there danger when pressing them?

@adubbproductions

4 ай бұрын

No. I don’t believe so. Obviously don’t deliberately smell the fumes but pressing a dtf is significantly different than being in a room with dtf powder all over and in the atmosphere.

Just ran into a guy who is on his death bead because of the powder Lcoated in MA smh im sending him this video ... None of the companies are labeling any warnings on these powders

That powder makes me sneeze and that was me opening a package of a transfer so I would never use it I rather use a white tones printer

have you hear about a new printing technique very similar to DTF, but that dont clog your printer? its called FTS, invented by a colombian company apparently.

@adubbproductions

4 ай бұрын

I’ve never heard of it. But I’ll take a look. I don’t have any printer clog issues though. I leave mine sit for a week at a time with no issue. Does that method use powder? Tell me more.