Dexta Dual Clutch Overhaul (Trailer for DVD)
Автокөліктер мен көлік құралдары
Dual clutches or 'Livedrive' as it was often known featured two clutch plates, one for the transmission and a separate one for the PTO and proved to be a popular feature of tractors from the 1960's. The PTO clutch could be operated by a hand lever or by a 'two stage' clutch pedal, pushing the pedal halfway down disengaged the transmission while fully down disengaged the transmission and the PTO. Using a 'hands on' approach this presentation follows the dismantling, repair, re-assembly and setting up of a Fordson Super Dexta dual clutch. In addition flywheel run-out, clutch adjustment and gearbox input shaft seal replacement are detailed. Improvisation plays a key role to overcome the lack of special tools. Although based on a Fordson Super Dexta the basic procedures shown will be applicable to other makes and models of tractor fitted with dual clutches.
Пікірлер: 4
Hi, I am needing to replace the clutch plates in my Super Dexta. It's a 9" dual stage. I don't have one of the tools described in the manual. Wondering if your video shows how to set up this clutch without a special tool and if so, how I can get a copy of view your video? Kind Regards, Mark
What's the settings for the toes
thanks for this though it does not show how to adjust the levers/clearance
Ok Ok