I was wrong about this saw, it is not $1500 it is about 1,100...Here it is amzn.to/38ckzki apparently the motors burn up on these things all the time. You can read the reviews. But there is a newer model that is 1500.00. But it still has the same handle and I'm still not interested. Anyways for those of you asking, the DeWaukee shirts will be available to order early next week!

@gerardocruz3950

4 жыл бұрын

Where can I order a dewaukee shirt?

@FinishCarpentryTV

4 жыл бұрын

Gerardo Cruz I will have a link posted early next week. It will be an online store where you can get one and I will make sure to announce it. Thanks!

@chefsteven34

4 жыл бұрын

Finish Carpentry TV I want DeWaukee shirt. Two actually. XL. Cheers!

@iannlb

4 жыл бұрын

Great review, completely agree. In my opinion the best all around scms is the dw718 for many reasons. You can pick them up used for 2-300$ and most of the parts are still available.

@JB-ez2jz

4 жыл бұрын

Rich u go out and buy this piece of stool or did the homeowner have it laying around that mansion or something??!!??

4 years later and he's wearing their merch and his shop is covered in lime green everywhere. Gotta love it 🤣

The worst thing about owning a Festool is, having to peek out the window every 30 seconds to make sure no one ran off with it. 😬

@stephanschouten8497

3 жыл бұрын

You are right, why would you steal a DEWALT????? :-) ;-)

@luie92114

3 жыл бұрын

@@stephanschouten8497 why would you buy a Dewalt! Lol jk there saws are ok

@danbailey96

3 жыл бұрын

E30 M3 I don’t know how good they are the price is ridiculous and not worth the difference between Dewalt

@EM-fi2qg

3 жыл бұрын

@@danbailey96 Using a Festool and Dewalt saw is like using a Lie-Nielson chisel and a Buck Bros chisel. Both will get the job done, but it's all in the craftsmanship and feel. You will have more confidence while using something refined. I have also heard of people using their Festool once, and then it sits in a corner, collecting dust. I have an older Hitachi compound sliding miter saw and I will use that over any other saw, just because it feels better in my hand, and I have much more control with it.

@garyblack8717

3 жыл бұрын

Just hide it behind your Yeti cooler.

I have a kapex and I Love it, I've cut right inside a customer's house when it was pouring rain outside, no airborne dust at all when connected to the vacuum system

FYI: the trigger in the handgrip is enough to pull the saw down. To engage the motor you have to use both triggers. I must admit that it is not immediately clear when using it without reading the manual.

@williamwallace410

2 жыл бұрын

Yeah, I was thinking the same thing about the trigger. When reviewing tools, it should be done after extensively using the tool. Not a quick first impression. Also, one of the best things about this saw is the clamp system.

I've been using a miter saw for about 30 years, and I agree with you about the "deal breaker", and the hand motion. I use a Dewalt saw also.

I actually agree with almost everything you said except for the deal breaker... I carried one for almost eight months. I refused to buy the $100 a piece crown stops for a saw that i don't own, but the kicker was the day that i had to cut 4-1/4" base on the flat because to the right, the motor wouldn't clear.

PSA: He’s a Festool guy now.

@conditionsunknown9384

17 күн бұрын

I know right lol 😆

I’ve been in the construction business for almost 30 years and have owned my own business for almost 10 now. That being said I don’t like DeWalt tools at all but your honesty in other videos was refreshing. You sir have another sub.

Thanks for the review. My one comment: I like the implementation of the ball slides. I own a Bosch Glide saw. The one feature that sold me was that nothing projects out the back of the saw. I have limited space in my garage, and I can leave the saw setup against the wall.

@GarwoodNick

4 жыл бұрын

👍 The Bosch Glide is the one to buy

@Smedleydog1

4 жыл бұрын

If I had to replace my DeWalt, I would definitely look at Bosch or Delta. I really like the articulated arms and they are butter smooth. Some sliders don't move near as smooth.

@brois841

4 жыл бұрын

Mark, as you said, that slider implementation is simple and ingenious. Why did nobody come out with that before? The Bosch system seems nice as well, but looks bulky and complex. What say you?

@AnibKram

4 жыл бұрын

@@brois841 I would not use the Bosch saw as a portable, because of its weight. I don't see where it is more bulky or complex. I've worked on a lot of other (non-woodworking) machinery incorporating recirculating ball-slides. The glide mechanism is more reliable.

@brois841

4 жыл бұрын

@@AnibKram gotcha, thank you! By bulky I meant both size and weight, sounds like it may impact the weight but not the size. Again, thank you.

Actually a hint about the handle design is: The design made by the German engineers is smart and has a purpose: The handle is in line (i.e. same plane) with the disk so that the push force does not create a torsion effect like with other table saws that have the effect of reducing the cutting precision due to the excentric handle design (push force out of the disk force). Also, depending on the height of the workshop the handle may be also ergonomic (easy to use).

@egorglushkov9024

Жыл бұрын

Also ambidextrous by default.

For the vastly superior dust collection, putting price aside, I think I would try it and see if I thought I could get used to the odd grip. Good review.

I've used DeWalt, Makita, Hitachi, and Festool miter boxes. The Kapex in my favorite, followed by the DeWalt. The handle on the Kapex is awkward at first, but I got used to it pretty quick. It wouldn't keep me from buying the saw. I like the large bevel scale too. Very easy to dial in on fractions of a degree. I also like the soft start motor.

@rjwhite907

2 жыл бұрын

Of course you like it, you've already wasted your money on it,lol

@clockbuilderhg

2 жыл бұрын

@@rjwhite907 Actually no. I've used 2 Kapex saws but haven't bought one. Most saws I use are owned by the company that I work for and I don't do enough carpentry at home to justify the cost. If I was in business for myself, it would buy the saw I like most.

As a DIYer I use a cheapo Evolution saw and I've found it perfect for my use.

@vistron888

3 жыл бұрын

@@cuebj The two saws I have by Evolution are customer returns. :-) They sell (well did when I bought them) on Ebay at a heavily reduced price. I also bought their oscillating saw brand new which is really very good.

Hahaha, I'm a DeWalt guy too and as soon as I saw that handle I thought the same thing!! Plus you can hold the blade guard up just a bit with your thumb on the DeWalt.

@Bart-Did-it

3 жыл бұрын

All my Dewalt gear is old gen and epic to use with none of theses issues people raise . Most people want the saw to do all the work all they do is throw the wood at it lol . You need some skill to use a good mitre chop saw . How you hold the wood and how you use your body and how you stand are all very important when it’s all day long . It’s ok but not for me to Noobie and clunky and that trigger nah mate . All this new gen from dewalt is good but just a gimmick to sell to the apprentices today super green horns now . Dewalt DW708 the best saw they ever created and the first gen 18 volt mini double compound mitre saw I have three of the same one . And worth twice now what I paid for then. All the other stuff that’s out is just not needed really with the selection we have today . They have not really improved much other than upped the price and upped the battery power and the designs are going out the window . Could of had this tech 15 years ago but they start slow to make mega cash . I’m not buying into it . This saw is for DIY ‘ers and way way to clunky and pokey for me .

@caitlinleanna5028

3 жыл бұрын

@@Bart-Did-it I have an older DW708 when the slides were up and down instead of side by side, The saw is a champ, could use new blade spindle bearings but otherwise perfect

@Bart-Did-it

3 жыл бұрын

@@caitlinleanna5028 under over rather than double barrelled . Much more stable why they go back to side by side I have no idea other than slightly more compact. I have the DE708 110 v The 240v is even more powerful

@Bart-Did-it

3 жыл бұрын

@@caitlinleanna5028 not thrashed mine enough for upgrades or repairs yet had first one stolen . And for some reason even from all my site work bashing my saws have never needed calibrating they still rock solid . And they get smashed good everyday

@singlefather01

3 жыл бұрын

The problem is Dewalt is made in China by the slave labor. So is Milwaukee. Why does a Chinese company has a name from American city?

Oh, and BTW, it is not necessary to push the thumb button and handle trigger at the same time in order to lower the saw head to your workpiece-you only have to pull the trigger. The trigger releases the head lock and its throw is limited by the thumb button-the saw will not start until you push both at the same time.

Please do a video on how you would do tapered porch columns! Your work is awesome and I enjoy watching you make things easier to understand. Thanks

The cleanliness of the saw with dust collection is the reason I run one on my jobs. Most of my winter work in New England can be inside a customers house. I have to be as clean as possible wherever I setup.

@juanoramo

4 жыл бұрын

For 1500 I can buy two vacuums, a 12" miter saw and a 10"sliding miter with 2 hoods to cover dust and 2 vacuum/tool switches. DeWalt or Bosch

@wxfield

4 жыл бұрын

@@juanoramo Yep. I have them too. And they still won't perform like the Kapex so far as dust collection is concerned. You need to be a commercial user that has to work indoors in the winter to understand how important dust mitigation is inside a customers home.

@michaelglaser1669

4 жыл бұрын

@@wxfield same here. that's why I got it. working oin new construction "Tall and skinny" homes with 54 stairs... kitchen is usually on the top floor "for the view" and the homeowners dont want contractors using the elevator...

@wxfield

4 жыл бұрын

@@michaelglaser1669 Roger that. I hated cleaning up after jobs with my beloved Makita. I had to setup zip walls and make cut rooms out of plastic. Even with those precautions it took 4-6 hours (or longer!) to cleanup. Not with the Kapex. Do the hourly analysis on your cut room setup times and take-down times..you'll probably find that paying for tools that have near perfect dust collection is well worth it..even with all the ergonomic problems Kapex has.

@michaelglaser1669

4 жыл бұрын

wxfield I don’t have issues with the ergonomics. So many people are used to stand directly in front of the blade, which is really dangerous. One should always be completely to the good-side of the cut (just like positioning on a table saw. So I like it!

With the triggers, you can disengage the safety stop very easily, there is a small plastic pin just inside the blade guard, that stops you from bringing the saw down. Just clip that off, and you will completely bypass that safety feature and be able to use it like any other miter saw. I did it with mine, it takes 3 seconds to do. You can also do this with the top button, that is to disengage the actual switch, go inside the handle and find where it interferes with the switch, and again cut the little bit of plastic that is causing this. Its well worth it. Also its a shame you werent able to try out the laser, it is amazing, it has a line either side of the blade and its ridiculously accurate.

I seriously enjoy your videos. As far as KZread videos go you are the smoothest carpenter ive ever seen.

I appreciate your comments on this tool. I had an old Craftsman chop saw with a pistol grip (which eventually broke) and I never liked that style of grip. Festool makes some awesome stuff (that I will never own because I don't want to spend that kind of money) and truthfully, I am just a guy who likes to work with wood and build stuff because it's fun. I personally like the Hitachi 12" and the Kobalt 10" sliding miter saw and I saved a lot of money. I enjoy your videos keep it going.

Personaly, i’m used to this saw and i like the grip more than any other saw. With the Laser you don’t have too check the blade against your line any more. Saves a lot of time

@nicholaswirth1011

4 жыл бұрын

we use ours for large alloy stair nosing, also being left handed its so much easier to use then any other saw.

@emilebeckerseb

3 жыл бұрын

Lasers are so imprecise though. Especially with trim carpentry. I very much prefer a shadow line over a laser.

@Minimal444

3 жыл бұрын

Shadow line of DeWalt is so much better than lasers.

@OOTurok

3 жыл бұрын

Not true... if you are doing precision woodworking, that laser does not account for the thickness of the blade. 1/64th of an inch makes all the difference between having a slight gap in the corners of a picture frame... or just a hair line seam.

@OOTurok

3 жыл бұрын

@@barrychopsticks I've done woodworking for over 25 years, since I was 15, using the same DW780... & I get hairline joints all the time with it. When compared to Bosch, Milwaukee, Makita, & Festool... they ALL have the same level of accuracy. Lasers are a gimmick. I've used the Festool at a tool show, & while the laser lines up with the mark... there is a very slight gap, between the mark & the cut. When you check the cut using the blade... you can get it right on the mark every time. The only thing lasers, on miter saws, are good for is... making cuts faster, but they are not as precise as checking the cut with the blade. No brand makes an ultra precise laser. Part of the problem is the laser's amplitude disperses by the time it reaches the mark, creating considerable beam waiste at it's edges... which makes lining the laser on the mark imprecise. If you are claiming that there is no beam waste from the Festool's laser... then you are simply a liar.

DeWaukee: I only use them as well. :) I broke my handle on the 7" M18 Milwaukee mitre saw: it was very cold (-20 DEg C), and I grabbed it, and it just cracked. It may have been weakened before. Have you seen any cracks in yours?

Bought my first mitre saw and now I'm watching videos on saws I'll never own for jobs I'll never do 🤣

@Devildough831

3 жыл бұрын

At least you bought a saw 🤷🏽‍♂️

@raynman6466

3 жыл бұрын

@@Devildough831 true! Except both my first projects have been total failures 🤣

@Devildough831

3 жыл бұрын

@@raynman6466 practice makes perfect

@Harokdguylol2

3 жыл бұрын

Metabo? Me too lmao

@Romad84

3 жыл бұрын

Same 🤣

Funny for people who use this stuff all the time. First thing I noticed was how that handle was and thought....that would be awkward...then when he finally said it I actually laughed out loud to myself because I understood what he was saying. Great video...very informative and to the point. Subscribed!

@xxyxnxwxaxx9724

2 жыл бұрын

He is Wright I have makita and dewalt. And I've used fesstool and the handle is weird. I will be moving over to fesstool though as it looks more professional in some sense.

As a professional interior railing installer and having tried several saws of the years, Dewalt are still the best I have found for the following reasons. The d-handle position is close enough to the guard that you can hold the guard back when lining up a cut when the 1/16ths and 32nds count . Weight for there size they is light . Cutting capacity of the 12 " blade for large square posts . Durablilty , same saw since 2006 and only had to repair armature once and usually brushes that wear out (and I beat the heck out of it daily ) . The only thing that I wish it had was better dust collection.

@frenchyroastify

3 жыл бұрын

I agree with all your points and I'd like to add the light shines on the blade so that the shadow is the cut line. Could use better bearings though.

@xxyxnxwxaxx9724

2 жыл бұрын

I agree, but one thing I disliked about the Dewalt was the sliding arms. Mine seemed to get stook and jolt. Wasn't smooth pull or push. I like how I could take the dewalt down and hold the guard up. My next chop saw will be fesstool. I will just have to get use to the handle.

@TheBuckyLumberCo

4 ай бұрын

Also, a good way to cut a finger off. I know, you've been doing what you do for years and still have all your fingers. All it takes is one time.@@frenchyroastify

@frenchyroastify

4 ай бұрын

How? My left hand is holding the moulding, and my right hand is holding the saw grip and the guard up. What's more dangerous is when the guard is in the way for a particular cut and people put a wedge in the guard so that it stays up.@@TheBuckyLumberCo

@TheBuckyLumberCo

4 ай бұрын

All I'm saying is you shouldn't be holding the guard up period. @@frenchyroastify

I've been a trim carpenter and contractor for over 40 years. Most of my career was spent using a Makita LS1011 bought in 1993 and I still use it at times. I bought the Kapex saw in 2015 for about $1400. For me it is well worth the money because minor adjustments are so EASY and most importantly ACCURATE! This saves me a lot of time with less trips back to the saw, and time is money. Obviously if that degree of accuracy is not important to you, the price might not be worth it. The ergonomics is a non-issue; if you are a carpenter you should be able to suck it up and turn your hand a little without it being a problem, then again it's what I've been used to. My "young" helper who has been a carpenter for only about 30 years concurs with my view; he actually dislikes the orientation of the Dewalt and similar saws. But what do we know?

Thank you for the video. Iv been thinking about upgrading my tools to festools but haven't been able to justify the expense and they just don't feel right. Im a Dewalt guy myself. I enjoy the videos. Keep up the good work.

I made the switch from Dewalt to festool. The first 2 weeks it was uncomfortable, the same 3 issues as you, now those are the 3 things I love the most about the saw. The laser is so awesome, double line that gives you the outside of the blade, almost like a shadow indicator in reverse. The handle has made my elbow hurt less and the trigger system has been an eye opener to how unsafe I've been over the years.

@jolookstothestars6358

Жыл бұрын

I've used all the saws out there and in my opinion the Festool is the fastest for a finish carpenter hands down! Two important things 1) Keep the blade clean. 2) Use a sharp blade.

We used Festool sanders in the field for solid surface installation. (Mostly countertops in homes and restaurants). All the tools they make are 100%.

@keithkuckler2551

3 жыл бұрын

All toolmakers have some good tools, and, some that are not great. I never liked Makita beltsanders, i prefer PorterCable, same goes for full sheet pad sanders. But, i love my Makita battery impact driver and drills. I love my Millwaukee Sawsall, but, the rest of the Millwaukee stuff i do not care for, except their drills which are very good. I use tools from every company, and, since i have been working as a professional cabinetmaker, trim carpenter, and, builder, i have had a few, if you looked into my jobsite trailer, you would find every color in the rainbow. I pick the best tool, not limiting myself to one manufacturer. I would not have this saw, if you gave it to me, After DE Walt came out with the handle they have, all the other manufacturers have copied it, i do not see why Festool did not either.

@kgilliagorilla2761

3 жыл бұрын

@@keithkuckler2551 I agree. My old Bosch jigsaw has really held up well. It has the long screw driver for tightening the blade. It has cut hundreds is sink holes in laminate countertops. Bosch made great hammer drills too. Porter Cable has the best routers, belt sanders, and the hinge mortise jig was awesome. My worm drive is an old Skil Saw. I have an old Makita 10” portable table saw that has cut miles of trim and boards. And my old 8” Hatichi (only tilts right) slider was my go to for crown and trim. The 14” saw is now the gold standard. Makitia battery drills are the best IMO. And yes, a Milwaukee saws all is hard to beat. I owed a Porter Cable, but Milwaukee is a beast. Thier old drills were the best too. Sorry for my tool rant, I could talk tools fo ev er! Cheers from Chicago

I’m with you on every point made. What I would say is the reason some saws have that handle type other than the ambidextrous situation is to minimize lateral movement while cutting. Usually on sliders. Makes some sense but at this level if I want to bang out cuts without being real easy and thoughtful on my motions I’m using my Single bevel compound. Thanks bud!

@tripleup2012

5 ай бұрын

Нет, это просто пилы для работы на полу. Рукоятки с горизонтальным расположением применяются в настольных инструментах.

I agree , One reason I love my DeWalt is the grip position , It's a 12 inch Slider , And being able to lower the blade on to a pencil line with out the blade rotating , Along with the many other features that my saw has that I don't see here on this saw Also I have it Paired with the DeWalt 4 Foot Stand , The Stand Also Has Many Handy Features , Thanks .

With a lot of guys in construction having carpal tunnel issues, yes cranking your wrist like that sucks and it is the first thing I noticed about it, when I saw it. I love my Ridgid saw.

@SometimeWoodworker

4 жыл бұрын

It isn’t just a Festool grip. Many Makita saws have a similar grip, as do Bosh and Hitachi. The Festool is an ambidextrous setup so cutting with your left hand when your work is on the right is safer and more natural.

My co-worker has this, I like it because it’s lighter than mine and easier to carry up three flights of stairs. I have the Makita and it’s nots easy to carry, it’s really bulky and and has sharp edges whereas this Festool has a plastic casing and a compact base. Way easier to carry. I work in San Francisco and almost every house is 3 or 4 flights, it’s a feature that matters imo.

@hootiemike3091

4 жыл бұрын

You need a damn crane to lift a DeWalt up 3 flights ffs its heavy.

@chuckgrumble5440

Жыл бұрын

with the UG cart you can wheel the kapex, its own stand, and extension wings all at the same time

@chuckgrumble5440

Жыл бұрын

@@hootiemike3091 almost need a crane just to move it a few feet

We use the festool sander, for drywall sanding. I have to say it's great on dust, easy cleanup. Never used this though, and I could see how quick it could burn out due to the bigger workload.

very smart and intuitive review you've made about use and features . my point would be that you are an amazing trim carpenter and you have shown us that you dont need to spend festool money to get super-amazing results. I'm sure im not the only one who feels this way. Thanks Sifu

I’ve had them all. Dewalt, Makita, Bosch... the Kapex by far walks all over them. Well worth the price tag. Been running one and now the latest iteration for about a decade. Never let me down, never had to replace anything other than the blade. Near set up. Set up anywhere space is an issue and the precision angle stop settings, lazer and bevel have gotten me out of more problem cuts than any other saw. This thing is a godsend. There a reason high end finish professional use them.

I DO like how the rail that it slides on doesn’t protrude out the back, I had to make my miter saw table extra deep to accommodate the rails and I have limited space

@bobleeds66

4 жыл бұрын

Consider the Makita LS1019L 10" ($450 on Amazon) if you are liking the dust collection and rear clearance (forward guide rails) on the Festool.

That angle finder immediately reminded me of the device Egon Spengler used in ghostbusters to detect the supernatural lol. 👻

I use it all the time and in my humble option it is fabulous, it’s also much lighter than most miter saws which is a huge plus.

I use an old Milwaukee chop saw that I've really hammered on for at least 20+ years. It's so old it was made in Brookfield, WI - and it works just fine AND I can still get parts for it. It doesn't have any safety features other than what exists between your ears...

@FinishCarpentryTV

4 жыл бұрын

Sounds awesome.

To lower the saw to “dial in” to the cut line you just squeeze the trigger by your finger (don’t touch the one by your thumb). You are using it wrong.

@sammy50001

3 жыл бұрын

What's the thumb button for?

@AlexKall

3 жыл бұрын

@@sammy50001 presume it's a safety for the saw blade motor.

@1totheright

3 жыл бұрын

🤙

@froggore52

2 жыл бұрын

The way he does it in the video is pretty unsafe because he could very easily accidently engage the blade while he's "dialing in".

Never heard of a kapex burning out, they are very expensive but the Kapex is undeniably an amazing mitre saw.

That is a big plus with the dust extraction. I am a novice when it comes to woodworking so I love to watch these shows because it helps to learn. I have been running a Hitachi table saw for the last few days to make some storage shelves for my storage shed and the sawdust is just crazy. I am looking at a way to deal with all the dust.

@ryanm2214

Жыл бұрын

You don't have to buy an over priced Festool saw to deal with dust collection...just FYI.

I immediately noticed when you grabbed the handle how awkward it was

@erikh3867

3 жыл бұрын

I could tell just by looking at it and im not a finish guy, but a window guy who uses my mitre saw once a month. (Its a DeWalt😉)

I’ve had my dewalt 12years ,never had to adjust it since I first set it up. Run miles of trim I’m happy

@charliecoleman4730

4 жыл бұрын

Don Payne I have the 12” dual bevel sliding compound miter saw...on 1x6 base it can’t cut a square outside corner. It always has a bow in it...thoughts?

@donpayne562

4 жыл бұрын

Charlie Coleman Hey Charlie it’s not cutting out of square but has a bow in the middle of the cut? Have you tried a different blade. Mine is not a slide but I’ve used them quite a bit . They seem to do better if you make multiple passes. Really hard to say but it seems like the blade is flexing to achieve a bow? I doubt this helped much but good luck.

I’m impressed with deWalt. We bought a batteri operated circular saw to cut some 12mm MDF. Charged the batteries for 6 hours before we started. We managed 2 full length cuts per batteri. Super stoked. Fabulous piece of equipment. Without it we wouldn’t even have managed 1 cut.

Thanks! You made it very understandable and straightforward!

I’ve been using my Festool miter saw for several years, and I love it. I can set it up in customers houses right where I’m working, and save lots of time with hardly no clean up. Any new tool takes some getting use to.

@rti6006

4 жыл бұрын

@webnothing I use Bosch too and it's amazing. Festool makes quality tools, but but not mitre saws.

@Paul-pj5qu

4 жыл бұрын

I think the superior dust collection is s big issue that benefits the user and customer big time.

@dewayneearley7298

4 жыл бұрын

Y'all do know they make an outlet tou can plug your saw and vac into where they come on simultaneously and it only run about $30. And works with any vac

@ib8192007

3 жыл бұрын

You are absolutely right . I agree with you sir . No problem with my Festools at all.

I went from a Makita to this Festool. It took me about a month to get used to it. You realize how much finesse you get out of this saw once your muscle memory adapts; it makes my 12” Dewalt feel like a grinder.

@chuckgrumble5440

Жыл бұрын

so true

I have a DeWalt, I totally understand having to bring the blade down to the cut line without it running. Having to hit that button greatly increases the chance for injuries! I've already lost one finger, so believe me ALL those other features aren't near the cost of losing one finger!!

I have DeWalt and Festool miter saws. It took about three minutes to get used to the Kapex handle. I use the Kapex for hardwood crown because the cut quality is definitely better. Dust collection is almost non-existent on the DeWalt; I can cut inside with the Kapex with almost no dust. The angle finder gets a lot of use, but you need a working laser...The only problem I have with the Kapex is the smaller size of the table and smaller crown capacity. You have to cut flat on crown over 5-1/2”. The DeWalt cuts it standing with crown stops. We gravitate to the Kapex for furniture quality cuts in hardwood; for production stuff the DeWalt is fine

I think that a super fair personal feelings. Ergos are everything not only does it feel weird but it looks weird. I’d like to get you feelings on the Makita 36v slider

@jksconstructioninc.3396

4 жыл бұрын

n3qdz I have the 10” 36v and it has been a great saw! A bit heavy/bulky for moving around the job site. But I think overall you would not be disappointed. Straight cuts, tons of power that last all day, and no cord. If you are already running makita tools it’s a good buy in my opinion. Best of luck

@cougill_trim_and_cabinets

4 жыл бұрын

It’s a killer saw, except for the aluminum detent plate. They cheaped out. There’s guys making ss replacements though

@zacharybaker695

4 жыл бұрын

I use the makita 36v 10" saw professionally. Stain grade and paint grade work. Once dialed in it works amazing. I had a few issues making beveled cuts that were square but that was mostly the way I was pushing down on the saw causing it to flex quite a bit. I've had mine for a year? And put hundreds of hours on it. I'd buy it again in a heart beat

@paulquiring4045

4 жыл бұрын

I have the makita 36v. Love mine! I'm not stuck on battery format, I want best tool for my application needs. Custom cabinet maker

@richh8860

4 жыл бұрын

I also have the Makita 36v Mitre Saw and love it, and it’s a brilliant tool platform, bang for your buck,you can’t go wrong. I abandoned my Dewalt platform when they went from Nicad to Lithium, and as for the Festool,it’s just hard to justify the price tag

I think the vertical grip is to keep all the pressure generated by your hand in a downward direction during a cut rather than having a horizontal handle offset to one side which creates a slight rotational pressure. If that makes sense

@SandyridgeGR

4 жыл бұрын

Irelevant. Negligible.

@ILikeCatsMoreThanILikeYou

4 жыл бұрын

@@SandyridgeGR trivial, inconsequential... Do I win the word game??

@SandyridgeGR

4 жыл бұрын

@webnothing couldn't agree more. Basically I hate everything about this saw. Who would EVER buy a saw because it collects dust well...? I hate uncomfortable awkward tools.

@SandyridgeGR

4 жыл бұрын

@@ILikeCatsMoreThanILikeYou definitely in the running...

@juventinhoPL

3 жыл бұрын

@@SandyridgeGR no other saw have that much precision in cuts. I dont know where are you from but in my country high end carpentry is finished in lacquer not painted wood like in US. Try cutting lacquer in 45 degrees with other than festool saws and you will see why it costs.

The tight/slow swing and safety switch was my deal breaker but mostly that I'm left handed it just wasn't a good fit. But the dust collection is incredible awesome.

I began finish carpentry in high school 37 years ago and have used every tool I could get my hands on. Overall, I have found DeWalt, Milwaukee, and Makita to work the best. I really like DeWalt's Flexvolt tools...have the 12" sliding compound miter saw which uses the shadow casting system...I like it a lot. I tried the Festool line a few years back and didn't get excited about how they felt to use. They are so overpriced too. I'm seconding your observations. The only other miter saw I thought to try is the Bosch 12"...it's a hinged, folding arms design I'd like to use for a few days.

My Dewalt Flexvolt 12 inch for the win. Huge fence, huge blades = huge cuts. I hate the handle on that Festool. It's like you're giving it a handshake every time

Ive had the same thoughts I def Like my Dewalt better

Good review. I’ve got a DeWalt and love it. Love the overall engineering of the Festool but totally agree with the hand switch criticism.

I agree with the dust extraction element of the festool, I totally agree with your opinion on the start button, I like the dewalt start and yes you can get down and see where your cutting which in my opinion is safer than guessing where your cutting because you cannot get down because of the start button and where it is. I prefer dewalt too and had one for 10 years now and I am contemplating buying the smaller version for the site work rather than lug the larger heavier dewalt to site, the larger one is in my workshop and will stay there hooked up to a 4" extraction.

Festool seems to have a cult following which focuses on the wonders of their dust collection. That is a great feature, but I don't find it to be compelling enough to convince me to spend the extra money. To each his own, but I'm going to keep my Dewalt saws & drills and use Porter-Cable and Bosch routers.

@jerryray808

3 жыл бұрын

After you spend that much money its hard to admit the mistake.

@OOTurok

3 жыл бұрын

Festool is the Iphone of the tool world.

I too looked at the Festool and ended up with the Bosch, this is after 17 years using the Dewalt 12" compound miter saw, which I liked but the Bosch is better. In regards to the Festool vs the Bosch is the sliding portion, the Bosch is hands down smoother and to me that was the deal breaker. No matter what other features, positive or negative, you will slide that saw nearly every cut so it better be smooth and the Bosch beats them all.

@sonsabiscuiteaters5913

4 жыл бұрын

Is yours the Bosch with the axiom knuckle? I think that design is more versatile than the usual slide bar.

@southbaygladiator7748

4 жыл бұрын

I have the bosch and the Festool. I worked in a joinery shop. Hands down the bosch is smoother. But the festool is much more accurate which is big in my business, and easier to get accurate. But it only being 10 in it loses out to me. I wouldn't purchase it again if only in 10 in.

Good review, but I have to say I love my Kapex. I have had one for 16 years now and love it. In the beginning, the handle safety feature was hard to get used to, but it's like second nature for me now.

Could you do me a favor and measure The entire width of the saw with the crown stops including the tightening knobs if they are protruding Past the crown stop wing. I bought the saw two months ago but I did not purchase the crown stops yet because I don’t know if it’s going to fit inside the recessed space I have built in my trailer for it and I can’t find anywhere where I can actually get an accurate width. Thanks

I previously had DeWalt for years and loved it but now own the kapex. Both great saws, both have good and bad points. What I would say tho is that people obviously prefer certain brands and tend to stick with them throughout their career so often they can become binded towards other tools and brands. For me the kapex 120 is fantastic, over priced yes, but a fantastic saw nether the less.

👍🏻 Thank you for making this video! The description of “this” is ergonomics.

I will have to agree with you on this evaluation. I too own a dewalt and I love it, it has the LED light that casts a shadow instead of a laser, used mine next to my brothers Milwaukee and I'm glad I chose yellow, and for almost half the cost.

@jerryray808

3 жыл бұрын

Ya I want the shadow. On my DW & Mak

Totally feel ya on that handle and it being a deal breaker. What are your thoughts on just the vacuum itself? Is it good enough where you might consider using one in your process?

Never giving up my Dewalt 12" Sliding compound miter saw, been using them for at least 20 years

@mishasilkin1186

4 жыл бұрын

Scottybravo1 agreed. festool is for the rich hobbyist that buys a $1000+ tool for every cut they need.

@bradbrinegar1419

4 жыл бұрын

Table saws and mitre saws dewalt has figured out.

@mishasilkin1186

4 жыл бұрын

Brad Brinegar they have the best take saws and mitre saws yes. I have grown quite fond of their routers as well and am very impressed. As an old school porter cable user dewalt is nailing those out of the park. Also Their drills seem to be at the level of Mikita. Impressive.

That un-ergonomic handle is the first thing I recognized in this video, considering the innovations and cost of products from this brand I am surprised they have stuck with the old style handles. Another great vid, cheers.

@darrinmc

4 жыл бұрын

I always thought they used a handle like that so the downward force was inline with the blade. Less chance it would cause the blade to twist.

@MsElijah16

4 жыл бұрын

Darrin yeah I think the dewalt might start twisting when it gets old and everything gets loose

@hwdconstruction5058

4 жыл бұрын

I asked Festool about it a few years back. They claim that the handle design reduced vibration in the blade. It sounded like BS to me.

@stevenmoore7334

4 жыл бұрын

@@darrinmc u are right , once u put pressure on a cut with a side handle like dewalt the saw head twists slightly that's why festool designed theirs in line with blade

@xtranormal2350

4 жыл бұрын

@@darrinmc It's not like it would be impossible to have an ergonomic handle directly inline with the blade.

I went from the dewalt to the festooI and I 110% agree with your review. 2 other things I would add is that European blade is expensive and also doesn’t have as much depth of cut as the dewalt 12 slider. I also like the dewalt light that casts the shadow over the blade. I found that it’s slightly easier to see during the day than the laser. Also with the laser, while straight, it isn’t perfectly spaced with the blade. If I make a thin pencil or scribe line to cut I’m basically guessing within a 1/16” of where the blade will cut. Fine most of the time but I’d like to see more accuracy. On mine the laser is slightly more off on the right side of the blade than the left and adjusting it is a nightmare. I agree with your assessment that the overhand grip SUCKS, worst design I’ve ever tried. At this point I’m honestly regretting switching, the only reason I did so was because of the dust collection is so superior and my health takes precedence.

Festool orbital and the vac setup is amazing how little dust escapes. Just like how it looked here. They definitly did that right.

Good review Richard, There’s just too much “tool snobbery” out there. Guys just convince themselves that the more you spend the better the product...and the end result Great channel young man, truly a pleasure to watch and learn from you, best wishes fro U.K.

@scotlandwoodwork2553

4 жыл бұрын

"Tool Snobbery"...lol Guilty ! Great phrase though, I'm stealing it. :)

@ass2mouthallday

4 жыл бұрын

Today unfortunately, the more you spend....the better the tool most of the time.

@terryswinhoe8118

4 жыл бұрын

Scotland Wood Works yep been there with golf clubs so I’ve learned to rack back when it comes to tools.....sadly

@terryswinhoe8118

4 жыл бұрын

ass2mouthallday hi yeah I agree, but does it improve skill level? I have well healed DIY friends who have committed whole heartedly to Festool. So now it costs them £1200 to cut to a pencil mark when previously it cost them £600, but they’re happy and the Festool marketing team just love them....just Saying!

@tkfcon37

4 жыл бұрын

Your so correct Mr.Terry...I seen many guys spend a million on tools have everything you can think of, but shameful to say can not construct a dog house properly but they have the latest and greatest, but no true skills to get a job done correctly...lol

I worked with a "Festool Freak" and had to share his saw as my Dewalt was stolen on the job site. Worked on it for a full week, 12 hour days, on a job, 150 rooms in a high end hotel, tons of detailed trim work. Have to say the dust collection is superb! Major draw back was the handle position and lock mechanisms . They where awkward and doing volume work on it for a full week was fatiguing on the wrist and forearm. It’s a nice saw, however there is nothing that overwhelming on it that would entice me to purchase one at that price point. We cracked jokes about the crook stealing the Dewalt and leaving the Festool.

@jonm2416

4 жыл бұрын

Simple minded fools probably mistook the festool for some weird harbor freight crap cuz they never seen it in the pawn shop b4 😆

Re: the dust collection, it only works with festool vacuum. If you have a different vac, the hose is a different size and it only works with festool vac switch, not others. Also, festool has a proprietary arbor, so you can only use festool blades. Literally the only thing I like about that saw was the half degree marks make it easy to get a precise miter.

@OGStr8UpJack

4 жыл бұрын

Proprietary ... another reason I stopped buying Fessy early on and sold everything except my sander. They make good stuff but you get charged a premium on all the supplies you need. The only reason I keep the sander ( it is a great sander... ES150? ) is I finally found a 3rd party supplier of the sanding discs with the proper hole punch outs.

The reason the handle is positioned on top is not for left/right-hand usage, but so the blade does not deflect sideways when you pull down the handle (and use some force like with solid wood) I had the makita ls1219 for about one week, but sold it and bought the kapex mainly for that reason. When i cut a big piece of oak, the front was square, but the back bottom not. Also it came perfectly calibrated out of the box, could only get the makita cut perfect either at 90 or 45°, not both, and that after half hour of tinkering with a lot of screws. I agree that the safety switch is awkward though.

Correct me if I’m wrong but also having to “lightly” pull the trigger along with the safety button to pull it down and line up a cut is super unsafe as you could pull the trigger a bit too hard and actually start the cut prematurely. I assume that’s why they engineered in the laser that isn’t working. Lol good stuff. Love the channel.

@ass2mouthallday

4 жыл бұрын

He was doing it wrong, you actually don't need to touch the safety at all. Just pull the trigger and it releases the head of the saw and you can bring it down and line it up all day long if you want. At least mine does that, I have the REB (newer) version and in this video is the "motor blowing up" EB model.

@unitedgray

4 жыл бұрын

@@ass2mouthallday You still shouldn't have to do that. That "safety" feature makes the saw more unsafe than anything. That's absurd that they designed it that way honestly.

@darrinmc

4 жыл бұрын

@@ass2mouthallday The EB version works the same way. Pull the trigger lightly to release the head - the saw won't come on no matter how far you pull the trigger unless you're holding the safety down. It seems quite safe to me if you know how it works.

@ass2mouthallday

4 жыл бұрын

unitedgray I would at least use it then voice an opinion. It hasn’t hindered my use of the saw whatsoever. People are overreacting to this.

@RetrotechCNC

4 жыл бұрын

The safety“trigger” releases the head!!!!!! At any point thereafter press the top button with your thumb to activate the saws motor! Very simple operation.

Is just a matter of getting used to it. I use to think like you. Keep on using it and you will end up loving it. We have 2 of these at our cabinet shop and they are amazing tools. It just seems too soon to do a review.

Actually, you were right about the price. The Kapex model featured in the Amazon link is the older (now replaced) model 561287. After years of user complaints about premature motor burnout, in 2019, Festool finally updated the Kapex with a new motor and a few other useful improvements. The new model is designated as the 575306 and is sold in the USA at $1475. Festool made a small number of older (561287) Kapex models in 2019 but with the new motor, so even if you had the older carcass version (561287) you may -- or may not -- have used one with the upgraded motor. As some of your other commenters observed, the Euro version uses a completely different 240v motor, not the 120v sold in the USA. The 240v Euro version is generally highly regarded as a rock-solid performer. Let's hope the USA version now has a more reliable motor. Even so, I, too, don't like the ergonomics of the handle design. And as to the older 561287 Kapex version, I say "No thanks at ANY Price."

We did the same buy in one of our shops Weird adjustments, low power and the worst ergonomics on a chop saw. Can,t beat the DeWalt chop saws ! Oh, ya, the motors went out on both, and the dealer/repair is super slow!

6:40 yep, that's the first thing I thought when I saw that handle!

@nickrangel139

4 жыл бұрын

Euro standard nanny state level safety. Gay.

@plandr5

4 жыл бұрын

The only way I could see it maybe working is if you have it on the floor and you are over the tool more while on your knees which I doubt is what they had in mind

@larryscott8151

3 жыл бұрын

This is an ergonomic design flaw. After several hour a day and day after day , that awkward hand angle will give some users problems.

I love the 8" hitachi brilliant all rounder, light and reliable also well priced at £200.

@marcinprygon1740

4 жыл бұрын

I own Festool Kapex KS60 but still use little Hitachi

@kanahomesconst.boomsanchez9376

4 жыл бұрын

The early model C8FSE8 made by Hitachi was the best. That same model made today and most Hitachi Miter saws made in China are a piece of crap. I still have the original and it's still going. Smooth as silk.

@jamesalexander8368

4 жыл бұрын

I use the 8” Hitachi as well...very smooth and accurate...I lay the crown flat and use the positive stops and get perfect results

@itsonlyacommentsnowflake3346

4 жыл бұрын

@@jamesalexander8368 same, saves loads of time scribing with close to perfect results 👌👍👍

@markmurto

4 жыл бұрын

You know, I have an old blue Ryobi 8 1/4 inch saw, rare now and too old to use safely, and I loved the mobility and 8 inch blade so much better than a 7 1/4. I think a 7 1/4 is just too limited in size for a chopper. .I really want a modern little 8 inch miter saw for carry-ins. The old blue Ryobi is retired of course, but I really did love its size in the old days. Is this saw a good comparison to say a Milwaukee 7 1/4?

Totally agree on the handle. I have a metal chop saw like this, vertical handle design, and that is actually good because you might work with it on the floor level when you cut heavy pieces. But when i bought my first miter saw, i was like i don't care how good is the saw, but if it comes with a vertical handle and not horizontal, then its a big no for me. I don't kno why or how, but i even feel more safe to work with a horizontal grip on a miter saw.

In my shop we only use Festool. The reason for the handle being the way it is, is so you can use it with both your right hand and left and not have any differences in feel. That is also why there are two lasers. Time is money and being able to cut from both sides save money.

I used a Kapex saw for a few weeks and didnt like it at all. The dust collection is good as you said, but thats about all is was great at. On a jobsite its a toy. Its fragile, proprietary blades, the cost... Not worth it IMO. The Dewalt 12" or 10" is the way to go IMO.

I liked the makita mitre saw it always felt off to me when I used my coworkers dewalt saws

@joepro3562

3 жыл бұрын

I'm a big Makita fan too, they make their tools as bullet proof as possible with very little maintenance. But as a homeowner, not a contractor, I have to say they're a little on expensive side for my budget so I relegate purchasing their tools to what I use the most. I honestly think Makita on the whole makes better, more thoughtfully engineered tools than any other brand.

@tomorainns145

3 жыл бұрын

I prefer milwaukee but makita has a great feel to it

I used festool at the Dallas Makerspace and they are very nice to use. Ryobi is like a Toyota Camry, Dewalt is like a Lexus ES350, and Festool is like a Tesla Model S. If I had festool, I would use the dust collector everytime I use the chop saw or the sander, and if I need to vacuum my car for a DIY car detailing, I would turn the dust collector on to max power and clean out the crumbs, stones, twigs, little wrappers, and leaves with it and use the festool rotex to polish the dashboard and condition the leather/leatherette upholstery and trim. The trigger on the Kapex that feels weird to you, does not feel weird to me. I actually find it as a very nice safety feature to prevent missing digits or serious cuts.

Thank you for this practical review. As always your comments are spot on from a guy who works every day.

Thank you for the "user experience" review. Technical review is good, but I do want to know how it 'feels' as well.

@worldsbestidiot7110

3 жыл бұрын

How it feels for him will be different for you, depends what you’re used to.

@davidkeely869

3 жыл бұрын

He said it feels weird and awkward ?

@mcboomsauce7922

2 жыл бұрын

"feels good in the hand" lmfao....,its a $1000 saw...and no,,,they dont feel good in the hand because the fuckin PP plastic they use isnt even deburred festool is by far the most overpriced crap on the market and they market their tools to people that have no idea about how to do anything and their designs are based on "eliminating skill" rather than "getting shit done" this dude is a trim carpenter....trim is usually cardboard and paint you can do most of this work with a miter box and a handsaw and still not break a sweat for small jobs if you do it all day every day...yeah...buy yourself a power tool for fuck snakes, but dont buy a festool....festools are for people.,,like you people who just see a price tag and have zero concept of manufacturing, engineering, or using 1 tool for 18 hours straight im more than certain you could re do your trim with this setup...but you could also do it with a hacksaw and save $1000 and spend it on something worth $1000

Handle and safety switch are deal breakers for me. I like the crown stops though

@JimTom.

4 жыл бұрын

Its actually not that bad comfort wise, you get used to it. You can disengage the trigger safety stop very easily, there is a small plastic pin just inside the blade guard, that stops you from bringing the saw down. Just clip that off, and you will completely bypass that safety feature and be able to use it like any other miter saw. I did it with mine, it takes 3 seconds to do. You can also do this with the top button, that is to disengage the actual switch, go inside the handle and find where it interferes with the switch, and again cut the little bit of plastic that is causing this. Its well worth it

The dealbreaker for you on that side is exactly the same for me, I am a Finish Carpenter and I love everything about the key pack saw except for that funky handle

I totally love their sanders and vacuum systems, I have 6 festool sanders but have Milwaukee and DeWalt for everything else.

Had my festool saw for the last ten years I mainly work from a joinery shop so it's really good in there its not really a site saw I love it but most of my kit is festool

@mikehunt8170

4 жыл бұрын

I agree this os better used as a cabinetry/furniture tool. That's what I use mine for mostly but have definitely put in a lot of hours on it remodeling homes as well. It's a high precision tool and I hear people saying theirs breaks all the time but I've had mine for about five years and never had a problem. Maybe people are being a bit rough on their tools lol

@joshparry6123

4 жыл бұрын

@@mikehunt8170 definitely more of workshop saw

I have been in the trades my hole life and every Contractor I know lines their cut line up with the blade, that looks way dangerous having to pull the trigger a little bit to be able to line up the cut line. I 100% agree with you on how weird that handle is as well, I have never use a Festool but just that alone makes me not want to try it either. Lol

@darrinmc

4 жыл бұрын

He wasn't doing it correctly. You don't have to push the top safety button to lower the saw. You just pull the trigger lightly and it will unlock. Even if you pulled the trigger all the way at that point the saw won't come on unless you are pushing the safety button at the same time. I'd say it's safer than the Dewalt since on those saws you could (not likely but could) accidentally hit the trigger when you're lining up the cut and the saw will come on. There's no way the Kapex will start unless you have your thumb pressing the safety, which you shouldn't be doing when lining up. The laser really limits the need to line up cuts. That said, the handle on the Dewalt is more comfortable.

@juanoramo

4 жыл бұрын

I always line up my cuts with the DeWalt and the D handle makes it so much better of a motion and you don't have to put your finger on the trigger to bring it down. I set up my saw with a rigid shopvac and a vac/tool switch and a dust hood when working inside. It works for half the price.

@riverbuilder2251

4 жыл бұрын

Mark Gross you know it has a twin laser line setup right? You just put the red laser line on your mark and cut, no need to do anything else, perfect every time. Even on 45degrees it remains perfect.

@markgross3256

4 жыл бұрын

@@riverbuilder2251 yes I'm sure it does, all my saws have a laser line even my tile saw. But I have never used them I just always use the blade. Lol

@OOTurok

3 жыл бұрын

@@riverbuilder2251 Lasers never perfectly match blade thickness. I've used the Festool at a tool show, & the laser is only accurate to 1/32nd of an inch. That's good enough for crown molding & general carpentry... but fine wood workers look for hair line seams on their joints, which requires matching the blade to your cut line for ultra precision.

Your modesty is refreshing. You are an expert, your take has considerable value over some tool nerds recanting of specs. Keep on crushing buddy!

With a properly aligned and working laser sight you don’t need to creep up on the cut line. I do agree with you about the switch and safety button! If nothing else festtool should move the button over to the side for better hand position.

Festool have developed a reputation for innovative well thought out designs... looks like they dropped the ball with this one! I used a saw many years ago that had a similar arrangement, but the handle was vertical, not horizontal like that one. It was good to use, sort of like pulling down on a chain, and worked with either hand. The handle like your DeWalt is the most natural to use, unless you want to use it left-handed.

Excellent review. Wanted to go more into Festool, but quit after two purcahases. They are big on this integrated, modular system with all their tools. I stopped after my second product when I recovered from sticker shock and the price of replacement parts, particularly after I had to buy a replacement part. And my sense that those tools are really meant for a shop environment. Unfortunately, I need my tools for a dual purpose, both to be used on the job and in the shop, something that gives me more bang for my buck.

@TechieTard

2 жыл бұрын

LOL, let me guess, you realized that 300 vs 2300 will cuts wood and that feature really wasn't worth it.

@thyslop1737

2 жыл бұрын

@@TechieTardDo not even know where to begin with tools. I have a love/hate relationship with them and I have had more tools lost or stolen, then I have ever owned. Then the whole corded versus battery debate. I am so sick of extension cords. Any cord I hate it. And I am so tired of the batteries dying on me and having multiple chargers. More chargers equals more crap to keep track of. I can't win. Last, but not least, I hate being the guinea pig with tools, but what are your options?. You buy a tool, use it in the field or in the shop and you find out later there is a feature or something you do not like about it. And I have had them all:Rigid, Porter Cable, Bosch, Hilti, Hitachi, Milwaukee, Makita, Festool,Dewalt, no Ryobi or Fein ever, so which one am I missing? Name it and I probably have had it. Need to retract at least part of my vitriol towards tools. Had the 10 inch Makita sliding compound miter saw. That tool I really liked. Light weight, easy to change your angle setting and cut smooth as butter. Is it mitre or miter? Have seen it spelled both ways.

Great review have you ever tried the DEWALT track saw yet. Thanks for posting all the great videos big DEWALT fab been using there tools for years very heavy duty well worth the money.

Yah love both my DeWalt miter saws..one stationary and one sliding. My only issue is the sliding design moving back so far.