thanks great help excellent video cleared my doubts 🙏

Hey man, great video. You said you were getting blade wobble and I am too. Did it show up in the cut quality as well? Im getting pretty heavy saw blade marks in my material. My saw is tuned very well for parallel and square, the heavy blade marks are the only thing i can’t get rid of

@amadeus214

8 ай бұрын

No. In my case, the cut quality was fine. Even with the original DW blade. See in this video, too: kzread.info/dash/bejne/q2h50NiFfbbaYqQ.htmlsi=fFjiTQ10WLmDhMFx (I upgraded to Freud cross-cut and rip-cut blades later on.) A fellow woodworker had serious cut quality problems. His blade was replaced under warranty, this solved his problem.

What did u replace this part ? What were the symptoms. Mine started making a awful noise upon Start up. Like I lost a bearing.

@amadeus214

2 жыл бұрын

I replaced it because of the wobble of the various saw blades. No noise or whatsoever.

@cj1684

23 күн бұрын

@@amadeus214 exactly the reason I'm replacing mine, 1mm wobble on my blade.

Were you able to buy the replacement parts somewhere in Europe ?

@amadeus214

2 жыл бұрын

Yes. There is an official dw service centre in Hungary. They are supposed to sell parts only to contracted partners, but if there is no other, drop them a mail /service(at)rotelkft(dot)hu/ But if you google for "dewalt ersatzteile", you will get many hits within Europe. When I bought it there was a significant delay in delivery due to covid, don't know how it is now.

Sziasz Hejj, Az a kábelkötő milyen speciális tuning?

@amadeus214

2 жыл бұрын

A magasságállító elmászott, csak néhány tized mm-t, de csapozáskor látszott. Van róla videóm kzread.info/dash/bejne/hJigpNqJnbqaqNo.html

You have to replace because it move side to side ?

@amadeus214

2 жыл бұрын

Yes, I replaced it because of the saw blade wobble ( although it did not affect the quality of the cut). see : kzread.info/dash/bejne/q2h50NiFfbbaYqQ.html It is better now.

What saw blade is that?

@amadeus214

Жыл бұрын

FREUD FR15W002TC 210-x-2.0/1.4-x-30-mm-z-48 ATB cross-cut blade, I am very happy with it. www.sautershop.com/circular-saw-blade-hm-210-x-2.0/1.4-x-30-mm-z-48-fr-fr15w002tc

Where can I buy this?

In reality Dewalt is not concerned with supplying a TOP bench saw: -The internal dust insulation has been changed, even so the machine releases a lot of dust. - It's a noisy machine. - The consumer does not have the option to buy this machine at 127 volts. - No disc brake - Goniometer with clearance. - There is no flange size option, plastering the consumer to buy cutting discs of another size (should come shaft hole flanges of other disc sizes as an accessory). - The cutting edge is out of adjustment. - The angle adjustment knob is too hard as well as unreliable. - Does not fit 254 mm disc, only 250 mm. When starting and stopping the engine, strangely "spark". DISAPPOINTMENT! The industries, such as Bosch, Makita, Dewalt etc. it is the same disrespect towards the consumer. Adilson you're right! Enough of watching videos from KZreadrs running their hands over the heads of the saw manufacturers just to beg and beg a shut up and in favor of GARBAGE!!!!!!! People who keep selling themselves to the manufacturers of saws and tools in exchange for "jabá". The reality is one, for tool manufacturers, we are considered third class consumers, not to mention the lack of safety and quality! We cannot and must not accept these equipment and tools without quality, safety and respect for others, it is the lack of maturity prevailing at the expense of reasonableness, common sense, ethics, safety and respect! We cannot accept that we Brazilians are treated as third-class consumers, denying us and making us have to consume products without quality. We don't have to accept what the manufacturers want to sell us and push down our throats, precarious, limited machines, which fall short of our needs. Today, the market has a lack and need for portable saws with better quality, as well as features and safety. This "little chat" and the justification of the industries that these machines are for construction sites only serves to relieve them of launching better saws. Year after year the so-called "releases" and or "new" do not have effective advances and improvements. It is the same as always, the accommodation of industries. What really changes is just price, always more expensive, without significant effective improvements for the consumer!

@amadeus214

2 жыл бұрын

Thanks for the comment, (although it seems not intended to be posted here :-) On a theoretical level, I don't like today's mass production practices either. In my dreams, I would like to get the quality of Martin table saws at Chinese budget prices. In practice, however, the DWE7485 is one of the best value for money table saws on the market in my opinion. For that price, I can live with its shortcomings :) (I am a hobbist and I have no financial interest in these at all.)