Today I tried to purchase a Atomix for $99, even though Home Depot said they had them in stock, they didn't. Three different store had Inventory for the Atomix, but none actually had them in stock. So I complained nicely to the manager and she said I could pick out the drill that was similar to what I was looking for and I could have it at the same price as the Atomix. So, I went and showed her the XR with a 5ah battery, not knowing it was a lot more expensive, which was $179. She said no problem and took $80 off the price. Home Depot may have the worse Inventory tracking but they are keeping me as a customer.

@TheBootyWrangler

2 жыл бұрын

Now someone will just hide the extra stock somewhere nearby, get the discount, and dip without ever legally stealing anything

@legendarypillow1450

2 жыл бұрын

Damn really? God damn

@Youtubeuser1aa

2 жыл бұрын

Nice

Checked out your channel from watching “VCG” on KZread. I’m a DeWalt fanboy. Subscribed after watching past videos. Good luck on getting to the 10K subscriber milestone!

@ManCaverTools

4 жыл бұрын

I thank you so much sir and I have 275 video to watch and upload pretty much everyday. :)

So what your saying is if your getting paid by the hour go with the atomic, if by job go with the XR.

@ManCaverTools

4 жыл бұрын

lol. that is a good way to look at it :)

@sunny3560-e6y

4 жыл бұрын

LOL

@wyattschmalz8

4 жыл бұрын

Lucky me my work has atomics

I look at videos like these from time to time to pass the time. Each time I'm glad I went with the XR series. I have a 1/2 impact, 1/4 impact, and the 1/2 inch chuck brushless drill non hammer model. I wanted to keep all the tools from the same line and the XR series seemed like a good choice. I also now know if I ever need to drive an 8 inch plus lag in, I'll grab the half inch impact. I'm a big fan of battery powered tools, they definitely have their place and suit my needs better than air or corded tools. My next one will most likely be the angle grinder and circular saw.

@ManCaverTools

4 жыл бұрын

The Xr line is awesome andI thank you for viewing Swoop

@FoolisH409

4 жыл бұрын

Just got me an XR impact, an the new 60V Flex Volt circular saw I highly recommend! Never used a cordless saw that felt just as powerful as a corded until now!

I have had the XR impact and drill for awhile and they are awesome.

Just got a combo XR deal at lowes with the drill driver dcd791and the dcf887 and I couldn't be happier. I started out my electrical apprenticeship with an extreme series 12v impact and driver, the XR is definitely a huge upgrade but the extreme still has their uses as they're super lightweight!

@ManCaverTools

3 жыл бұрын

I do love the extreme, and I thank you for viewing Rodolfo

Freaking awesome! Imma have to upgrade the XR then. Still happy with my atomic set though.

@ManCaverTools

4 жыл бұрын

XR is badass but that doesn't mean that your atomic is garbage. it would be good to have both. :) can never have to many tools

@qtip919

4 жыл бұрын

@@ManCaverTools Agreed! I like the atomic drill for light work. Its so compact and light that I usually have no reason to go dig up my smaller makita (10.8v). The atomic set at aroun 150 is a great entry level set and makes brushless affordable. I think the m18 set is a good option too, but if someone's already in the dewalt line, the atomics are great light duty tools

@averyjones1098

3 жыл бұрын

The brushed atomic line is better than the brushless and cheaper once the brushless mottors slow to a certain speed they will shut off so drilling functions like paddle bits you will see thiss

Great video! Thanks for taking the time to put all of this together.

@ManCaverTools

4 жыл бұрын

not a problem and thank you Migueche20

Thanks, man that was very helpful! Looked fun, too! Good stuff!

@ManCaverTools

3 жыл бұрын

I Thank you so much for viewing :)

That dewalt XR with a 5.0 battery is a monster!!! By the way, mine come with the spring assist to make easier the change of bit. Just push it and expels the bit by itself

@ManCaverTools

4 жыл бұрын

Thats a very good feature to have and thank you sir

I've always bought the XR version. You did show me that the Flex battery is not just a gimmick! I may have to invest in a couple Flex batteries.

@ManCaverTools

4 жыл бұрын

I use the flex battery all of the time and I thank you James

@blakebauer2722

3 жыл бұрын

I've noticed a power increase in my other 20v tools using the flex

I use the Atomic line hammer drill. For the price and the compact design. It's perfect for most drilling tasks. Good clutch for delicate tasks such as installing door locks. Compact enough to use it for car detailing with a drill brush. It's no where near as powerful as the $300 XR hammer drills with the metal gearbox, metal chuck, etc. You can feel the quality difference. It still has it's uses for the $150 price point. I have no complaints. It has paid for itself with the money it has made me. Belt hook is great on ladders. Good choice for dual carry with holsters when you need two guns on a ladder to save time.

Hilti Makes some nice Concrete Anchor Insert bolts, instead of using an impact wrench I simply used the 887 with a 3/8 adapter for a 1/2 socket instead and that works far better than an impact wrench at that size which is very typical connected to a 3/8 threaded rod.

@ManCaverTools

4 жыл бұрын

very good and thank you Ryan

Just got home from buying the atomic series set with impact and drill with 1.5aH for $229 because the store was out of stock of the same combo XR with 2aH for $199 (regularly $249). Glad I watched this before opening the box because now I'm running to another Home Depot for the XR and returning the atomic.

@ManCaverTools

3 жыл бұрын

I am glad I can help and that is what this channel is for

@kenfett7070

3 жыл бұрын

@@ManCaverTools No store within 150 miles had the XR, the manager of Home Depot told me to buy it off Amazon. She also said the Dewalt store on Amazon is always cheaper and USA made whereas the home depot ones are sometimes made in China. Good to know. I got the XR and it's amazing. Thank you again for this great review.

@JAYREEZE1

3 жыл бұрын

@@kenfett7070 the atomic line is not a bad tool tho yeah it’s seconds slow but it will get the job done

@destroyah321

Жыл бұрын

@@kenfett7070 pretty sure all dewalt is made in mexico

@destroyah321

Жыл бұрын

@@kenfett7070 just because it is chinese doesnt make it bad, ryobi and milwaukee are largely chinese based companies so is ridgid

Good video, not too shabby, not too shabby at all.

@ManCaverTools

4 жыл бұрын

I thank you sir

Just bought the 887 XR. Cannot wait to put it thru its paces

Thanks, was about to replace my broken (dropped from 30') xr with a atomic, but not now. Phew, close one.

@ManCaverTools

3 жыл бұрын

that is why this channel is here and I thank you Matthew

@alohamark3025

3 жыл бұрын

I purchased an Atomic battery and charger for $99. Got a Dewalt drywall screw gun for free. Based on this test, it may be time to return both.

Thanks, for the show, i wish you would have tried the Atomic with flex on that last bolt.

@ManCaverTools

3 жыл бұрын

more videos will be coming and this was an older video

@TheAceAtGames

2 жыл бұрын

It wouldn't have pulled it

A good feature to have on your impacts LOL- a Collet that works

@ManCaverTools

3 жыл бұрын

that is correct lol, that is actually VERY important

Love my XR drilled holes and tighten loosen and re tighten bolts on my enclosed trailer still has plenty battery left . Put in 52- 5/16 bolts and 80 self tapping screws #12 and had to drill holes in wood and steel beams. Worth paying the extra money. I got lucky lowes had them priced wrong. They came with 4 amp hour batteries, have impact driver and impact drill.

@ManCaverTools

4 жыл бұрын

very good and I thank you for sharing your story Pat

@tombomombodombo

4 жыл бұрын

How much for that combo?

@patmason7276

4 жыл бұрын

@@tombomombodombo bought mine 2 years ago they had it priced wrong saved 65.00. Look online or lowes for sales . Be careful homedepot has brushless impact and drill but it's the atomic line not as good as XR.

The 887 isn’t a bad impact I used one for years no problem still going along now worth my money.

@ManCaverTools

3 жыл бұрын

I dont think its a bad impact at all either.

Check out the new MetaboHPT multivolt line. The reciprocating saw is the best on the market and the other tools are nice too.

@ManCaverTools

4 жыл бұрын

Will do and thank you sir

Hi, The DeWalt DCF887 1/4" impact is a pretty good impact. Like i mentioned before i use both brand (DeWalt & Milwaukee). I guess there's a lot of mix feeling and some bad batch of DeWalt DCF887 and Milwaukee gen 3 - 1/4" impact. On VCG TTR and other comparison videos they hada few that started to burn up. Plus a few youtubers had the same issue. I had mine and it never burn up or given me any problems. I also have my milwaukee gen 3 1/4" impact and it also works great. No colet issue like some people are having and also Vince at VCG is having. Again a bad batch. This just proves that issues do happen to all companies. Funny how both company haven't mentioned or stated that they address the issue. They both are quite or hoping people can forgive and forget. Or maybe they solved the problem but don't want to bring it up. Either way I'm very happy with both brands. Yes one is better then the other but each company has tools better then the other. Thanks for making time to make this video..

@ManCaverTools

4 жыл бұрын

I agree and I thank you very much for you feedback. some tools dewalt dominates and for some Milwaukee dominates

Putting the bolt in the midle is the pith so is softer but still impressive. I would like 2 see a review on the draper d20 impact driver thanks.

@ManCaverTools

4 жыл бұрын

will do and I thank you sir

@rosskennedy7039

4 жыл бұрын

@@ManCaverTools looking forwid

Fantastic review, thanks!

@ManCaverTools

4 жыл бұрын

I thank you Kyle

Ive been remodeling old homes for almost two years full time, my atomic impact hasnt let me down yet. That being said i did upgrade this week to xr after my raise.

I've had 2 of the xr models and they both struggled with 'intermittent power' almost like a slipping clutch

@ManCaverTools

4 жыл бұрын

we will see how long these tools last on my channel and I thank you for viewing

seems like the ryobi did pretty good to. Im thinking about getting an xr recp saw

Just found your chanel today and im hooked. Think you could do a flexvolt skillsaw vs the wormdrive one? Or even any flexvolt vs the xr saw? Would be great, thanks!

@ManCaverTools

4 жыл бұрын

Pleny of videos are coming up and thank you for joining us and stepping by 5:30 pm

10:13 for a second I thought you let the smoke out on the XR but it was your breath haha

@ManCaverTools

4 жыл бұрын

lol it was cold in the garage and thank you for viewing

@howiefeltersnatch2596

3 жыл бұрын

@@ManCaverTools fire up the ryobi torpedo!

thanks for the videos. Do you happen to have any videos comparing the atomic brushless to the regular 20-volt max brushed? Any opinions on the 2?

@ManCaverTools

3 жыл бұрын

I do not, brushless vs brushed isnt a good video because the brushed tools are week

@jamesmarshall5794

3 жыл бұрын

@@ManCaverTools What about a video of the Atomic Brushless VS the Max Brushless (The NON XR version).

Im glad i reccomended the xr model to a customer i helped he said he wanted the best and was originally looking at atomic but i just had to read the specs and he was sold on xr, hopefully i made the right decision leading him to the xr instead of the atomic

@ManCaverTools

4 жыл бұрын

You did a good thing to recommend the XR. The atomic is awesome but the XR is the way to go, especially recommendations to a customer

@joshbenton810

4 жыл бұрын

I would go with the brushed impact over the atomic.

@slabslayer258

4 жыл бұрын

XR is best way go in my opinion it’s like there construction model an the atomic is just a re branding of what I call city boy home use models they usually weaker on specs an not built as tuff in my opinion

Youve got what you paid for but any way it doesnt matter if lower end model performs slower the important thing is they can accomplish both of your project

@ManCaverTools

3 жыл бұрын

but because of this video people know what these can do

@craftsmantrucker6867

3 жыл бұрын

HVAC AE, yeah that's true I agree. But as a Carpenter, Framer and Deck Builder I wouldn't use Impact Driver for that kind of task regardless of Brands. For 1/2", 9/16" and little bit bigger diameter lag bolts I would use my Mid-range DeWalt DCF894 Brushless 1/2" Impact Wrench for a much larger Fasteners, like Post Lag bolts especially for concrete or much bigger hex fasteners I would use my Ingersoll Rand 1" Pneumatic Impact Wrench (the one that mechanics are using to take out Semi Truck's Wheels) why I still have Pneumatic tools?? Because those are the ones that I don't use most often. You don't need cordless battery operated tools IF you don't use them the most. Common sense and you can save tons of money for buying tools. And for impact drivers? As long as they it can drive 3-1/2 deck screws or as long as it can drive 8" Timberlok or Spax power lag screws you'll be alright.

This video was not too shabby...Not too shabby at all.

@ManCaverTools

4 жыл бұрын

Thank you sir

Wow that Ryobi is Nooooo joke. That drilled those long lags in effortlessly. I'm a blk and yellow camper. But Damn that Ryobi sent those lags home fast.

@ManCaverTools

3 жыл бұрын

I thank you for viewing :)

Great test I have been firm believer in the dewalt XR versus that dam home use stuff Home Depot an Lowe’s sale even though now they carry the XR stuff but for them lag bolts I wouldn’t even use my impact driver I would use my 1/2 inch drive impact if it would fit in the location to run the bolts ass needed but you have to be careful that damn impact will break wheel studs off or twist bolts in half if they hit something hard lol

@ManCaverTools

4 жыл бұрын

will do and I thank you dustin

It depends on the type of job I think. I’d want the atomic as my main work horse because it’s lighter and more compact which helps your arm from getting tired. I’m hanging joists for my storage shed loft which means tighter spaces and having to hold the drill upright to get the screws in. I much prefer the atomic for that. However once I start screwing the plywood down the XR might be better because I’m pushing down and have more clearance. I think for most regular jobs the atomic is what I prefer. It’s nice to have the power of an XR but you pay for it with weight and size. If you don’t need the extra power then it’s not worth it. Smaller and lighter is better in my opinion.

I have both tools. Even tho the XR has a ton more power I usually keep it on speed 2. Which makes about the same as the Atomic.

@ManCaverTools

4 жыл бұрын

I love the atomic line and I thank you craft addict

@jamessparks5966

4 жыл бұрын

Why do you have both and which one do you use the most?

@jvirg

2 жыл бұрын

Same

just got my atomic today:) hopefully it’ll do me good till i can upgrade

FYI, the Ryobi drilled the screws in at around 4.74sec and the last screw, which was tougher, at 7.29sec. Dewalt vs Ryobi should be next :)

@ManCaverTools

3 жыл бұрын

I can do that and I thank you for the suggertion wild

I tried them both side by side, the Atomic is barely smaller and much less powerful, XR is far better for the money

@ManCaverTools

3 жыл бұрын

XR is your best bet

@destroyer.e

3 жыл бұрын

I just swapped my atomic for an XR

My non brushless dewalt stuff has been going strong for so long Felt like I should upgrade got a good deal on a atomic kit (impact and hammer drill 2 batteries and charger) for 165$ im really thinking I should just spend the extra 100-150$ an get the xr?

@ManCaverTools

4 жыл бұрын

The XR is an amazing impact and powerful, it would be a good idea

@skylerbond56

3 жыл бұрын

Home Depot has the XR kit with A Bag, charger, and 5AH battery for $129 right now.

Good video. Although; do most people use the 4ah batteries? Also; was the battery on the atomic older or exposed to a lot more heat or cold?

@ManCaverTools

4 жыл бұрын

2ah and 4ah are what is mainly put in kits

Cool i love your video !!

@ManCaverTools

4 жыл бұрын

I thank you Sir

Sob. I just bought an atomic impact, jumped ship from Makita after 10 years of faithful use. Was wondering what the difference was but I like the compactness of the atomic. It’s been working fine for mixed duty automotive and home use. But REALLY good to. Know that flex vol pt battery made a difference because I did pick up a flex volt blower too. 🤘🏻

@ManCaverTools

3 жыл бұрын

I thank you for viewing Bayer

... little off topic, but it looks like you have enough Dewalt kit there to be able to answer the question, is the all the 18V batteries interchangeable between the units ? 2nd part... does the 20 batteries work, and fit onto the 18V XR range ?

@ManCaverTools

3 жыл бұрын

you will beed an adaptor for the older tools that have a stem.

Amazing video. Thank you

@ManCaverTools

4 жыл бұрын

I thank you Pat

I see that it's very cold in your garage do you keep your batteries there if so does it affect the life or performance of the batteries?

@ManCaverTools

4 жыл бұрын

I keep my batteries in doors due to winter. I have them originized in its own brand bag with a charger.

@jamesfair9751

4 жыл бұрын

ZachShop very cold temperatures will decrease a batteries run time. However the good news is just warm them up and they will regain. I personally would not recommend leaving them in extremely cold areas for long periods tho.

@mikekahotea9197

4 жыл бұрын

@@jamesfair9751 yup ,room temperature is the best for these batteries

Nice test and I like the camera placement. My question here is why would a 4ah battery give any extra “boost”? (10:40) the voltage is the power, the amp hour is the duration.

@LukaszSkital

4 жыл бұрын

More AH means more battery cells what usually translate into lower voltage drop at high loads.

@ManCaverTools

4 жыл бұрын

Lukasz is correct

@ManCaverTools

4 жыл бұрын

Thank you for answering that for me

The dcf887 might burn up on you especially with that VCG gear on those 2 dont mix. Lol jk great video

@ManCaverTools

4 жыл бұрын

lol I thank you sir

XR a monster drill I like it !

@ManCaverTools

4 жыл бұрын

very good and thank you Omar

What's the model numbers for both

Awesome! =) Which makita adapter for 6' did you use?

@ManCaverTools

4 жыл бұрын

it was the one with the diamond shaped head

Nice tools wish I had

Those are good lightweight easy to handle tools

@ManCaverTools

4 жыл бұрын

Yes they are and im glad I have both, tHank you for viewing

Thanks for putting this together. Was looking to get a new drill(as mine just took a dump on me)for my studio desk/building shit projects, and the Atomics are on sale for $100 at HD right now. So checking around to see if I need to get a Dewalt, which ones better, and if I should get cheaper Ryobi with a circ saw/handsaw for the same price(already have decent 12" Miter box with good blade on it). U from Chitown?

@ManCaverTools

4 жыл бұрын

I do live in Illinois, and you are welcome sir

I want to buy one of these screwdriver guns for my husband for Father’s Day but I don’t know which one 😣 the one that he has the battery doesn’t charge anymore. He is not a craft man he only uses it when something needs to be fix around the house. Which one do you think I should buy for him? Thanks for the video.

@ManCaverTools

4 жыл бұрын

not sure if you need a drill or an impact driver. but what id do is make sure its a Brushless motor

@Gangstarszz

4 жыл бұрын

Home Depot has a deal right now for an atomic drill, 2 batteries, charger and bag for $99. I just bought one and love it. Might be on amazon as well.

Does your atomic get really hot, mine does just wondering?

Not too shabby, not too shabby at allll

@ManCaverTools

4 жыл бұрын

lol

Canadian DeWalt models both Impacts are the same size height etc the DCF887 has a extra gear hands down the best on the market

wow both great power eater Atomic XR really awesome as always

@ManCaverTools

3 жыл бұрын

the Xr is a good one

@evilqtip7098

3 жыл бұрын

@@ManCaverTools Ya I work with the XR Outstanding ...Love it's power..

Why is it that both tools seemed to fail when using speed to over speed 1? I thought speed 2 was suppose to be faster/better for drilling?

@ManCaverTools

3 жыл бұрын

I Thank you so much for viewing :)

Man is Cold out there you need a heater garage ,stay warm bro great content I also enjoy atomic so far

@ManCaverTools

4 жыл бұрын

Thank you, just haven't been using my heater. but thank you sir

@barberjourney3698

4 жыл бұрын

@@ManCaverTools we need staying warm and safe some of us enjoy your content and will like see keep going it

I was wondering if the xr was worth it. That difference is bigger than expected. Over a work day that can make a huge difference in production time.

@ManCaverTools

3 жыл бұрын

we will see what happens in their promo

@Dom-ky2go

3 жыл бұрын

@@ManCaverTools I actually watch the comparison video of Milwaukee impact and dealt was impressed with the Milwaukee. Went to Home Depot and the Milwaukee rep was there. Now I own the the 5.0ah impact a hammer drill, sawzall, and got the 18ga. Brad nailer. Thanks a lot.😜

I just got the atomic set I'll just be installing garage doors with it so it should be fine. I'll never be using lags that large

This video was helpful because I need to install my desk to the wall in my home office and I know I need to go into the cinder block so I am looking for the right tool

@ManCaverTools

4 жыл бұрын

if you need to go into cinder blocks you will beed a Hammer drill as well

Good work.

@ManCaverTools

4 жыл бұрын

Thank you

They have them at Home Depot on sale with a 5amp battery for $129

@ManCaverTools

3 жыл бұрын

they have some good deals right now

@ALPHABEASTACE

3 жыл бұрын

I bought the atomic today bec the xr is 180 on sale with 1 battery and the atomic is 130 with 2

@BluntsOfKush1

3 жыл бұрын

I just bought the XR right now $200 because it came with a 5ah battery and a bag 💼

@theboz1419

3 жыл бұрын

@@BluntsOfKush1 I just recieved the same for $99 at home depot 😀

@Youtubeuser1aa

2 жыл бұрын

@@theboz1419 I just received the same at Home Depot for $50 Sucker

Luv my XR, great choice

@ManCaverTools

4 жыл бұрын

Dewalt XR.

only thing i question is you running the atomic at 2x battery life vs the xr 3x battery life... maybe the atomic didnt get a full charge? doesnt seem like a fair comparison imo

@ManCaverTools

3 жыл бұрын

both batteries were at full charge. some tools use more power than others

I’ve never personally used anything in the atomic line. But from the prices I’ve seen, and videos watched, thr atomic is that middle man. A step above dewalts standard brushless, but still having that affordable price point of a homeowner level tool with semi professional performance

@ManCaverTools

9 ай бұрын

The atomic line is a great line to get into.

Great video go my friend

@ManCaverTools

4 жыл бұрын

Thank you again sir

You reply to every comment that's amazing brother! 👍..what's even more amazing is your man shed of tools... I mean I have most of your DeWalt section, but that's where it stops... you have most of Lowe's +HD I'll have to search for some videos of your collection..

@ManCaverTools

3 жыл бұрын

I read and reply every first initial comment that everyone does. its hard to keep trap of a reply

they are two different prices. how can be compared?

@ManCaverTools

4 жыл бұрын

one is $100 tool only and the other is $100 for a kit. I think its a good comparison. the prices have changed since I uploaded this video

Were both batteries brand new, at the same temperature, and able to hold the exact same capacity? Unless you did a detailed battery diagnostic ahead of time the only fair way to compare the two impact drivers head to head would be to run the exact same tests but with the same two batteries swapped (recharged of course) and then average the time each test took.

@ManCaverTools

3 жыл бұрын

this is real world testing. I thank you for viewing Rob

All DeWalt auto-volt. 110/220 volts. Were using 220 volts here in the philippines.thanks

@ManCaverTools

3 жыл бұрын

I thank you for viewing Neng

Why didn't you compare the atomic 850 with the same three speed selector. I feel it would have been a better comparison.

Hi, thanks for your review. Can I use a 20V Atomic battery to power the XR driver?

@ManCaverTools

3 жыл бұрын

there is no atomic battery. so yes it will work across the tools.

Going to war with those tools.

@ManCaverTools

3 жыл бұрын

lol

And now I am subscribing

@ManCaverTools

4 жыл бұрын

I thank you Blunts. plenty of videos to watch and more are coming

Fuel vs xr is the brands contractors grade tools my shops full of the fuel and we love the 9-12ah batteries

@ManCaverTools

3 жыл бұрын

Yes sir and I thank your viewing Its

I’m not a dewalt fan. But I really do like your channel. I’ve heard a lot about the dewalt atomic burning up. It seems like a poorly made over priced door stop. I don’t remember there ever being videos made by Ryobi fan boys saying don’t buy this Ryobi ______. It sucks and will burn up on you. - like the videos about the atomic 887 Although I did buy a dewalt 12v extreme drill cause (I’m pretty sure) you did a video on it.

@ManCaverTools

4 жыл бұрын

I say how it is. if a tools burns up on a test I say don't get it, there are better options out there that won't burn up this easliy. Even if its Ryobi

@lordrichard8184

4 жыл бұрын

Ryobi Man Caver I just remember dewalt (specifically) having issues with the atomic impact. And I think VCG Construction put out a video saying don’t use the flex volt batteries in the 20v tools cause they burn up. They cut a dewalt recip saw in half after they burned it up. I guess they weren’t too happy with the performance. I love your reviews because I feel like you give everything a fair shake. And if something sucks you don’t hesitate to say it or make excuses for the tool sucking. I remember you did a video calling out a couple of Ryobi tools for sucking.

@Zee20Ate

4 жыл бұрын

Billy bob Smith I think you’ve got the dewalt tools mixed up here. The 887 was the one burning up and the 887 is the XR. The dewalt 887 is not atomic. The videos of the ones burning up were the 887XR, not the atomic

Is the xr brushless?

Is the XR better because it has a 3 speed switch, as opposed to the variable speed trigger on the automatic? It's interesting to learn how much difference the different batteries make to the power output. Good video, thanks.

@ManCaverTools

3 жыл бұрын

you are welcome and I thank you for viewing Mruniman

I use the Dewalt 1/4" impact to pull the spark plugs on the Ford engine that breaks the plugs in the block. Get the engine to running temp and quickly pull the plugs the impacting of the Dewalt breaks the rust in the block that is holding the plug. I've only broken 1 plug with the impact but the engine was cold.

@ManCaverTools

4 жыл бұрын

Dewalt is a fantastic brand and thank you for viewing sir

Great vid! Is it me or does that Atomic look like a renamed 787 with two additional LED lights?

@ManCaverTools

3 жыл бұрын

I thank you Garage workz

I have had DeWalt 20v XR stuff since 2014. I used and abused my 886 impact daily for all that time, and finally the trigger started acting up. I loved it the whole time but didn't invest further in DeWalt because I feel like they're not innovating or improving their designs. The head/top of the impact drivers are the same size as they were in 2014, and the newer models like the 887 have been known to burn up under heavy use. I ended up getting a Makita xdt14 to replace the 886, it's tiny and has more torque and even better modulation of the trigger. I really think DeWalt needs to step and give us more compact, and more torque in impact drivers especially, as the high speed/low torque combination isn't ideal for larger fasteners. I would argue that they were the best 2013/14 had to offer but it's been a long time.. Any thoughts?

@ManCaverTools

4 жыл бұрын

Makita is a good brand as well. and I thank you for viewing Master

For the big lags, I would have slapped a battery on the DCF899 and be done with it! Very similar/identical tools with different software. I own the dcf887 and the dcf899.

@ManCaverTools

4 жыл бұрын

the atomic did it very Weill the 6ah. major power boost

Do Atomic and XR Tools use same 20v XR batteries?

@ManCaverTools

Жыл бұрын

yes they are

It's meant for everything but commercial framing. I'll take a little less power for less weight and more real-estate in my tool pouch being a commercial technician.

@ManCaverTools

3 жыл бұрын

I do agree that power isnt everything and I thank you for viewing Experience

I got the dcf887 the dcf 787 and the dcf 801 and there all great for what there meant for

the 887 on speed 2 is basically the 809

@ManCaverTools

4 жыл бұрын

very good. cant wait to do more tests on these

The batteries on both impacts look pretty small

@ManCaverTools

4 жыл бұрын

2ah batteries were used and thank you Gen

I just want to wrench on my car. Will the XR do?

@babybenji808

2 жыл бұрын

I mean atomic

I think the DCF809 is just underpowered for what it’s supposed to be. I personally don’t own the 809. I use the DCF887, which, in my opinion, is just better, regardless of the issues this model has had in other tool test videos.

@ManCaverTools

4 жыл бұрын

the Xr is a very powerful impact and thank you Zach

got the wrong atomic should have compared the xr version of the atomic it has 3 speeds and its smaller also

I'll take my Dewalt 12V Xtreme over that Atomic all day , it has almost as much power in a smaller / lighter package . Watch VCG's video on the Xtreme vs Atomic. I also have the XR and its a BEAST , I usually only use it on decks and stuff and I usually use it on #2 because #3 can be a bit hard to control , it just wants to bury the screws all the time...✌ Be Safe....😷

@ManCaverTools

4 жыл бұрын

very good and I thank you Brian and be safe

Looks like you need to do a video Dewalt's propane space heater...

@ManCaverTools

4 жыл бұрын

it really hasn't been that bad of a winter this year. didnt need the propane like I did last year. but I might be picking one up and thank you sir

Nice vcg construction shirt

@ManCaverTools

2 жыл бұрын

I wore that hoodie for along time

It upsets me how u cant get all x r stuff in a combo. The impact amd hammer drill r the plain old 20v max

@ManCaverTools

3 жыл бұрын

I agree, who cares about those 1.3ah batteries

@adamcombs2739

3 жыл бұрын

@@ManCaverTools its not the batteries that upset me. Its the fact that the combo kit box says XR but the drill and impact are the reg. Ass 20v max. But the saws are all XR. The 1.3 batteries are not worth caring about i agree. But it came w the slightly better 2.0ah ones. They didn't false advertise that. Oh well. Lowes never noticed a thing when I bought the XR impact and hammer drill. Put my regular Ass 20v max n the box and got my loot back. Score 1 for the hometeam