Danny, I want to thank you for demonstrating the proper technique for spinning the pressure setting dial. No one else whose review I consulted showed that it is necessary to spin past the maximum to get the unit to turn on. I was all set to return the unit with a note saying this was my first and last DeWalt tool until I came into the house and ran your review a second time.

Great Video! BEST VIDEO ON THIS INFLATOR. YOU SHOW EVERYTHING STEP BY STEP.

Its outlook, design and features indicated this is a replicate from an ages chinese air compressor. The air compressor were there for years already.

Great Video... Thanks

I have this pump and love it. I use it for paddle board and our bikes and balls and mower, go cart etc. I’ve never used it for vehicles. One question, the dial around the play pause is my only issue. It Is sometimes difficult to get. A grip on it to spin it. Any line u would recommend to spray in there. I’m a diy-er at best and have no idea what to spray in that as it’s electrical and I assume plastic in plastic or something. Not the smoothest turn and difficult to get the fingertips in there an on that. Not bad on day one but it’s not easy now. Thx

@dannyjohnsonsgarage

7 ай бұрын

I would say electronic switch cleaner would be the best to go down into the switch. You wouldn’t want to damage the switch with liquid or blow it apart with too much compressed air. I’ll have to see over time what I can come up with

@donotrobme9295

7 ай бұрын

@@dannyjohnsonsgarage thank u so much

Excellent video! Question: Do I need to perform a duty cycle on the unit to re-inflate my each of my 4 tires by 10 psi after driving on a gravel road? And if so, is that simply letting the unit run for 5 min and then rest for 5 minutes between tires? Thanks so much.

@dannyjohnsonsgarage

Ай бұрын

It is always a good idea to recheck the psi for any difference in road or weather conditions. The psi may also increase as the tire heats up