DESTROYED JOHN DEERE MOWER - Will it Run?
Тәжірибелік нұсқаулар және стиль
This ride on lawn mower is rusty and rotten. It has been left outside for many years. The engine won't turn over and the whole thing looks like it's ready to be scrapped. Will it run?
Thank you to my Patrons
/ daggerwin
Пікірлер: 377
You have the perfect voice and technique for these types of video, they're very watchable, even for those without a mechanical mind. Keep doing it!
@mykeg2401
3 жыл бұрын
I agree 💯! Very entertaining. I’v learnEd so much watching his videos.
@shyamprasad7010
2 жыл бұрын
D@@mykeg2401
I really like your style of diagnostics and repair.
I’ve been fixing small engines since I was 14 and am now in school heavy duty mechanics. I like that you include the diagnostic process as well as how you fix it. Bang on
They ran that poor John Deere into the ground big time but glad you got hold of this classic mower
Was worried you weren’t going to talk in this video, when I heard you speak I was like “yessss!”
Gotta love when an "American John Deere" sticks a Kawasaki in it because they know the engine is vastly superior to things that they don't make anymore.. Amazing life cranker bud. I love watching these old machines get life back into them.
@CodyJohnstonbaugh
3 жыл бұрын
America engine quality went down once the flat head engines were no longer allowed by emissions. Kawasaki OHV engines are literally bulletproof and were an awesome reliable replacement for those reliable flathead engines.
@CodyJohnstonbaugh
3 жыл бұрын
Briggs and Kohler OHV engines just aren't built to last unfortunately. Chinese parts and poor build quality.
@BruceBoschek
3 жыл бұрын
I bailed out (left the USA) in 1965 and at that time "Made in USA" was equal to "cheap and dirty." Americans who could afford them bought German cars, radios and machines. My dad's 1961 Chevrolet rusted out by 1965. My mom drove my 1959 VW until the early 1970s.
@randyfonda3273
3 жыл бұрын
All fun and games until John deer throws in a Vtwin 22.5hp Briggs made in the US. I mean yeah Kawasaki’s were good but ever since the new Briggs V twins and Kohlers… Kawasaki gets to sit on the back burner making 2 stroke pit bike motors 😂
@CodyJohnstonbaugh
3 жыл бұрын
John Deere still uses Kawasaki and Yanmar in their premium models such as the X500 and X700 series and they are both Japanese made. Their budget Home Depot models get the Briggs Vtwin engines.
Never knew a motor that's been sitting for 10 years could run this smooth. Great job!
@speedbitgaming4124
2 жыл бұрын
well, the engine of my scooter wich was sitting still for nearly 16 years runs insanely good for its age
Always love the time and effort you put in to these videos. They are always very enjoyable to watch. Looking forward to the next one.
Great bit of logical troubleshooting, well done. Looking forward to the cooling system flush to see what it offers up.
Nice series! I love seeing these older John Deere's on here and would love to see more of them!
Wow this is the same JD I have. It's crazy that mine is in perfect shape and this is one is so neglected but yet this one runs better than mine does...
@netts2315
3 жыл бұрын
Sounds like your carburetor needs a cleanup/tune-up.
@anythingwithanengine8736
2 жыл бұрын
@@netts2315 Yeah I cleaned it up (it was full of shellac) and it runs better but still stalls once in a while. It does need a throttle adjustment because the idle begins to surge so I don't know.
@netts2315
2 жыл бұрын
@@anythingwithanengine8736 Perhaps a bit higher idle? Idk. Cool that you got it running better though!
@oscarbernal1461
2 жыл бұрын
Same but mine runs good
@sambontrager6392
2 жыл бұрын
Yeah it runs nice to think how long its been sitting out. That engine amazes me. Love ur video's
Never seen one rusted out this bad!
Always happy to see a new video from you. Saving it for Sunday morning coffee.
This is great thanks for the video I’ll be working on an old vintage green machine weed whacker and then I have a leaf blower that needs repaired thanks again I look forward to the videos you also helped to inspire me to become a lawn mower mechanic I now work at a shop for my job and I love it.
Machinery restorer uploads new video ,made my weekend ,cheer mate 😎 huge inspiration to why I got into fixing and restoring old lawnmowers and. Small engines ,all the best ,from Ireland
Holy shit.... So I randomly stumbled upon this video after doing some small engine repair research. As soon as I heard that voice I knew who it was, and a quick scroll revealed I was correct. I was both shocked and excited. I've been watching daggerwin for years to scratch my FS itch, and never knew this channel existed.... Super stoked!
Looking forward to seeing the next video on rebuild the carburetor, flushed out the cooling system and change the oil and filter. This engine and transmission would be nice donor to a good rider mower that the metal is in better condition. Enjoyed the video and have a Blessed One Sir.
I love your videos they are so entertaining .I get so excited when a new one comes out. Keep doing what you’re doing!
These videos have some of my favourite content & you present them extremely well.
Best entertaining small engine channel hands down! Keep em coming Taryl!
Great video, thanks for sharing!
Wow nice restoration
The transaxle in that mower is a really good one. Worth its weight in gold.
You are a great mechanic. It’s a pleasure to watch you!
Great stuff. I'm addicted to your videos, keep it up!!!
Everytime i see a brand new video from you, the first thing i do is giving them a like. Good videos :) keep doing it
I'd love to see this video followed up with a full rebuild on this mower.
Wowwww restoration that takes time, effort, and thought, so perfect👍
I missed your content. Thanks for another great video.
You definitely got lucky with this machine, theses engine can become huge money pits when they get older, primarily the ignition system and the parts are not cheap. I’ve never seen an older John Deere rust out this bad, the newer ones yes but not these ones.
@scottfirman
2 жыл бұрын
Just worked on one the other day, had tan oil in it...blown head gasket. I informed the owner and left it at that. I Not doing a head gasket job.
I have a John Deere 185 (Predecessor to the lx178 I think) and I payed 400$ for it back in April and it has been a very reliable lawn tractor. Great video! 👍
Nice one, stick a tow hitch on the back and its the perfect addition to any garage, boat yard, etc.
WOW!!! that sure started out as a pile of junk. Love the way that you get things going/running. just watching your videos is inspiring me to take a crack at getting an old ride on mower (that i have) going again or at least doing my best to get it running again. :)
Watching this on my other account thinking 'this chap sounds just like Daggerwin'. Watched most of your gaming vids. Keep up the good work Sir!
Nothing runs like a Deere. Very good informational video.
we want to see the video where you completely restore this lawn mower, I'm watching it from Brazil even though I don't understand your language but I like your videos
Great vid, fantastic narration. Keep it up
Awesome video as usual!
I love your show. It's well produced, your pace and clarity of diction are just right, and detailed explanations make this a great KZread. I tell my wife that I use your show for my R&R. Do you know when the 2nd video for this segment will be out? Also, do you sell most of the stuff you repair? Thanks
This is daggerwin didn’t know that lmao awesome to find a channel doing what I love with the people I love ❤️
You need to make these more often, favorite channel on youtube. I liked shared and obvisously commented. these videos are so good and informational. Make these more often please please please!!
Hoping for a full restoration series on it, great work getting it running. New parts easy to source?
Great video again thanks! The commercial here in the states says nothing runs like a deere lol. Should say a deerasaki lol. I’ve been a fan of Kawasaki for years, always had good luck with them except for my current one. My kx250f likes to eat valves lol, but that’s always inherent in this engine. Cheers!
For cleaning out the varnished old fuel use acetone, eats it really well.
I have this same mower great video to have if I ever have to tear my mower apart awesome video thanks!
I junked the single cylinder version of this machine a couple of years ago. I should have sent it to you, all the fenders and everything were complete.
whoever said you staged your videos is a goof.. Youre very good worker and take your time with machines, keep up the good work
Great video Dagger
I second the comment in here about your voice. It's perfect for these vids. KEEP doing it!
after sitting for so long im sure a bit of run time will seat the rings again and then there will be no smoke but im sure you already know that greetings from holland :))
Good video. When I encountered engines in that condition when I was doing a lot of this work, I would mix 30 weight oil with kerosene. About half & half. As long as you don't run the engine at high R.P.M.'s and for just long enough to get some heat in it, it doesn't hurt anything. The result is quite impressive in regard to the crud that drains out.
Awesome videos keep up the great content 👍
Very good I will wait second part for this lawn tractor (fully restrotion)
Great video, and amazing it didn't needed more work to be done before starting up after been sitting outside for 10 years. The smoke could be due to stuck piston rings, and after being running for awhile they might get lose again. Did you do a compression test?
Great troubleshooting 😊
Those are great engines!!! Im.from the states and people are always looking for those engines.
Great video looking forward to seeing the next video 👍
The British Mustie1! Great content. Please keep them coming. Steve in Virginia USA.
Nice vid daggerwin
What amazes me is this guy does this kind of work in a shed that most Americans wouldn't use for more than a push mower, holiday decorations, and some garden tools that will never get used.
That was really surprising, started relatively easily. Really nice running engine as well. What are the plans for this one?, after the carb is sorted.
Oh boy you got lot's of work ahead of you to get it back in shape good luck
My god, that things so rusty lol, do you all have acid rain across the pond? Or was it parked on a salt mound 😂
How on earth is it that rusty? Was it washed with salt water daily? I've had one sit outside for years and never seen that much rust
hmm, as a former John Deere staff, I'd say it needs a new head light bulb, maybe a bit more
I have a large gallon bucket of Evaporust that comes with a dipping basket, amazing stuff!👍
I was watching this and wondering why your voice is so familiar then I saw the patreon link and it’s blooming daggerwin love both channels mate keep it up
I was looking at one of these in my dads shop at his work today, I was surprised it’s water cooled, funny to see that this was recommended on my KZread lol
Thank you for your video.
It has a very strange washing machine noise when running and it's not burning oil, love your videos I find them very therapeutic.
New subscriber. She certainly is a runner thanks to the engine being a Kawasaki. Superb, premium small engines. These videos are long but are interesting the whole way through kind of like a good movie. You really have a way with sorting out issues and not wasting time but doing the right things first to remedy a problem. Not many people have your abilities which seem to be fading rapidly in western societies. In the US, mechanics have become parts replacers or scrappers more than fixit people but in the age of designed obsolescence it is entirely their fault. It has become cheaper and overall more cost effective to simply replace an entire thing than to repair it.
Wow that’s really rusty! I have an LX188 very similar to that and it had a 48 inch mower deck that had basically nothing left. That model has the 44 inch piranha deck. They were great little mowers. The Kawasaki liquid cooled engines did have some cam failure problems with a plastic cam gear but other than that they work nice. I work at a Deere dealership. My lx188 sat for two years outside in a cold environment with the battery unhooked. Hooked the battery back up and it fired right up. I put a 42” mower on it and have been using it daily. It’s beat up, hood is shot but it works great.
Excellent video
Love your videos man
"It could have been so much worse . . ." Really? Just kidding. Great job.
Great video!! I hope you restored the rest of the tractor
I've taught high school here Sydney Australia for 25 years, also Industrial Arts, Metalwork, Woodwork, Electronics,Physics, Chemistry and Science. I've been repairing small engines since I was 12. I repair most things, they generally are simple to repair. i am a Material Scientist. Your style of presentation is excellent. You do not go overboard when the engines start , as they generally should start when given the correct requirements. You are comprehensive as evident by your success. I use white vinegar to remove ALL rust , requiring wire brushing say every 6 hours. I do not us rust remover. White vinegar cost $1.20 for 2 litres and I keep using it for a along time. It is the cheapest way to derust, but it take s time. A suggestion. You do not need to be emotive about the parts. They either are dirty or broken. You are repairing metal, plastic and rubber. But I have to admit, at times some machinery has it's own character, and simply can be difficult to play ball and start. It has hapened to me when an engine has fuel, spark, air, and timing all correct and the engine refuses to start.
Next time you can put the pickup tube in a ziplock bag fill with evaporust. This is good for odd shaped items. Plus less evaporust is used. Great video.
Your videos are my favourite to watch!
Nice video great work
Great video and great contents
wow im impressed. in my experience hydrostats never work for me, i thought that would be the reason it was parked but it seems too be good.
Super job!
Fantastic vid good to watch why in lockdown in Australia right know
Another great video
Great job!
Yes !! finally new content.
I can’t wait for the next video!
love seeing that mower running its cool cuz of the look it has lol
Wauw... There is air in the tyres.... That's about the only thing going for it. Love your vids!
1] I hope this was given to you 2] is there a new reality TV show: "Demo Tractor Wars" [this one lost]? 3] I'm pretty sure I heard your grass laughing every time you started this up. Seriously though; good stuff, *well done.*
hearing those goldfinches at the start is such a sound of summer
Hi, OH MY ! Poor "Deere" , Bin Road Hard and put up wet! Hope it Runs. Good luck.
I'm doing my first lawnmower repair I have a husqvarna and a landline that is getting repaired I'm hoping to make a racing lawnmower soon
Well done - very much enjoying the content. As regards people accusing you of “fiddling” the condition of your projects - they are idiots - ignore them.
out of interest where do you manage to get all these neglected mowers from, you have inspired me to want to give a restoration a go, also i have watched you for years on your daggerwin channel and when i started watching this channel i was like this guy really sounds like daggerwin its uncanny, it wasn't until i saw your channel link at the bottom of one of the videos advertising your game channel lol i felt a right numpty haha keep up the great work on all your channels they are all as easy to watch and i enjoy them all, thankyou for sharing your wisdom and methods
You're like the Mustie1 of mowers. You guys would get along great.
Never seen a riding mower rusted out like that.
The fuel pump is cam-driven. The seal or diaphragm may be leaking fuel into the crankcase.
It took me a hot second to realise this guy was daggerwin