Designing T-Shirts For DTG Printing? AVOID THESE THINGS!
In this video, I'm going to show you how to master graphic design for print on demand or Direct To Garment Printing! I'll explain the different types of print on demand techniques and common mistakes you can fix in order to make your prints look stellar! This will be geared towards those who design with Photoshop but you can still apply these tips and tricks to other design software.
✦Start A Clothing Brand: www.apliiq.com
✦Master Merch Design Course:
merchdesignaca...
✦ For All Serious Inquires:
Info(at)CharleyPangus.com
Copyright Disclosure:
All designs and prints demonstrated in this video are for educational purposes only. I do not own rights to the Dr Disrespect branding used in the design and print.
This video was sponsored by Apliiq but they do not influence my opinions or production. All thoughts and opinions are my own.
#dtgprinting #graphicdesign #printondemand
Пікірлер: 83
For those wondering… I normally do knock the black out of my prints for darker garments but the point of this video was to experiment. I honestly think the print turned out great. Happy with it but remember, it can always look better haha. Thanks for watching.
@IanGruber81
Жыл бұрын
Thanks Charley, for coming down to the shop and sharing these DTG printing tips with graphic designers.
So many people dont know that there is a huge gap between designers and printers. This kind of videos really helps. Thanks new subscriber here
@CharleyPangus
Жыл бұрын
Really appreciate you saying that! You’re so right. 🙏🏼🙏🏼🙏🏼
I spent an entire day last week searching KZread for a video that would tell me this information - just went around in circles and got nowhere. So asked the universe, and today - Charlie delivered! Honestly one of the most useful videos I've ever watched in this niche. Cheers guys 😎
@CharleyPangus
Жыл бұрын
This makes me happy to read. Thanks for sharing and I’m so happy I got the chance to provide value to you.
Oh Wow - it helps so much to listen, what printers actually expect from us Designers. Thank you so much Charley!
@CharleyPangus
Жыл бұрын
This was so much fun to film and I’m happy you enjoyed watching.
@IanGruber81
Жыл бұрын
I find many people "give up" on dtg printing if the first print isn't exactly what they expect. I always recommend talking to your printer and asking for their help in improving your files to get what you want. Small tweaks can make big differences. Any DTG printer should be willing to review your artwork file and provide recommendations and feedback to help you get the results you want. In many cases, in order to make improvements to a file, you will need to test print it one time on the garment you want to use, then adjust the file to make any improvements you seek. Since there are no moqs with dtg printing the process is typically fast and not expensive (compared to other printing methods).
DUDE What a sick video! As a graphic designer whos working on a clothing brand this was a great insight into the market and also the way its done! Thank you so much and hope more people can appreciate how amazing this video is!
@CharleyPangus
Жыл бұрын
So happy to provide value to you! Thanks for watching 🙏🏼
@305dadecounty305
Жыл бұрын
Trying to start my own tshirt business. Is there a software you recommend to learn how to make logos, edit designs etc. ? If you could please let me know what I would need on the software side. Thanks.
@Zillano
Жыл бұрын
@@305dadecounty305 I use the adobe suite, it is really great as it comes with a community of people to help ya with more advance things like scripts and allows for so much customization, from 3d effects to 2d animations and graphic design adobe usually can do what you would like. Also the biggest thing is the tutorials online. Having a bunch of different peoples workflows and teaching you different efficient patterns really helps with learning the software side. It can put you in a good spot to go ahead and grow with your designs or style. I will say the biggest thing that helped me was a binder of all keyboard shortcuts and really important things I learn as thats something I can refer to and helps me remember. Excuse me for the paragraph I just got home from a trip but hope this sheds some light on a great product. Hope all goes well for ya!
I usually remove the black unless the design is inside a box or a giant solid shape. I also switch over to cmyk mode to adjust the color. Then ibswitch back to rgb to make my png. So far so good. I'm getting good colors and my shirts when I test them have been coming out well. I have yet to try using lightning. That will be my next test.
$. Using a dpi of 450 (over my usual 300) has made a significant difference in the quality of my dtf and dtg prints. Great information in your videos also, there was information here I never considered.
Your examples are way too zoomed out.
so there is a lot here, but just 1 quick note. You can 100% keep the grain in your art. A lot if what is lost depends on the Rip Software and the Printer being used. They are using Kornit Storms. One of the things about the Kornit printer is it pringing wet on wet, for want of a better term, That process tends to not do well with small detials, like dot grain or fine/small text. If your art has a lot of those details i would sugest a printer that uses Brother GTX printers or ever higher production shops that are using the Roq NOW printers.
@dangerbotkillco4435
9 ай бұрын
to help build contrast i bring the art in to photoshop and adjust levels, then the saturation and lightness, and finally, brightness and contrast. in that order. give it a shot.
This video is very helpful More videos on creating designs for printing would be great 😊
Two insanely loving guy 🙏🖤 Really insightful
for transparancy thing just make the design bitmap halftones like they do these days with dtf halftones, it works perfectly with DTG as well.
@CharleyPangus
Жыл бұрын
That’s what I mentioned In the video. I went over it a bit.
@CharleyPangus
Жыл бұрын
Thanks for watching
@IanGruber81
Жыл бұрын
Yes!!!! Please do not provide print files with less than 100% opacity for feathering, blending, or cloud effects. Use halftones @ 100% opacity to get more predictable results with your DTG prints. Keep halftone size at a good pixel size, if your halftones are too small they will not be visible (same as any printing).
@deven05
Жыл бұрын
@@IanGruber81 ye! Best way is to make the artwork 1200 dpi and then do halftones. Also knock off that black, bcz the tshirt black color can take care of that. It saves printer ink and makes the print less rubbery i guess
This video was great and helped me out, been wanting to see DTG in action as I'm trying to determine if doing the halftone routine that people use on DTF transfers will work with DTG in a similar way and I *think* it looks like it'll work for me, I do more print on demand because I can't afford the equipment investment -- I'm going to submit a couple halftone/knocked out designs and order them myself and see if they're acceptable enough to keep online but this has me feeling a little bit optimistic that it'll work for me. My main issue is one of my providers doesn't allow me to disable any of the color options (for the shirts) so I'm also attempting to try some different designs w/ a neutral sort of color that works on black, white, and colored shirts without looking too awful between them but not sure that'll work or not, seems with the halftone technique you kind of have to design it for one specific shirt color or similar colors but I'm going to test and see if there's any way I can make them look somewhat decent on multiple different colors. haha, this stuff is a little bit stressful for me whose only designed for screen or paper printed products most of my life... again, great video!
Great video! Around 6:40 Ian mentiones that there is a lot of noise in an area of the file, but it's hard to see from the camera what this noise is. I'm mainly concerned what happens when we remove the blacks from the image, because often individual pixels or small clusters of pixels that were lighter than the threshold are left in the artwork surrounded by empty pixels, and it concerns me that this might not print correctly using DTG. Is this a valid concern and if yes - how can this be avoided?
Did you print black ink on the black garment or is that technically a dark grey? I have done numerous tests with my machine printing the black in the design VS removing it and pulling the black from the garment itself. Just curious to hear your thoughts on this. GREAT VIDEO!!
@CharleyPangus
Жыл бұрын
I’ve also tried both ways. Black sometimes helps the print pop more but isn’t needed at all. I should of clarified this more in the video. Great question!
@paulgasparola5229
Жыл бұрын
@@CharleyPangus Thanks for the quick response! Would love to talk to you about art and show you some of my work, see what I could improve on. Appreciate you
So while in PS, should we be designing using CMYK mode? I see most people still edit in RGB, makes no sense to me?
Where can i find the video of you creating the seperations and the highlight layer?
Such a dope video! I'm curious what the results would've been with the black removed from the artwork. Or did he recommend keeping that in to help with the fine detail of the design? Regardless, it was awesome getting to see you get out there and show the full process with DTG printing!
@CharleyPangus
Жыл бұрын
Legend!!! Thanks for the comment man. So without the black it would of been fine just not as rich in color. I find it’s hit or miss. It’s definitely something to try again in a future video.
Is it best to leave the black color on the design or should we removed it completely so that the black color comes naturally from the fabric? Which best?
@CharleyPangus
Жыл бұрын
Problem with knocking black out is if it’s not done perfect you will see whitening around where the black used to be. I would always try both ways.
Does this mean that a white area with fading out usually works? Just colour over it is not possible with such precision? Or are there printers who simply apply a continuous white layer underneath? A white layer with varying degrees of transparency would be really great for some of my designs even if they are a little sparkley, but a solid white layer in that hole area would be really unattractive... Thanks for this informative video!!! Thumbs up!!!
Did you ever drop the video where you guys talk about the best shirt for DTG?
Great f***in’ video! That some cool behind the scene stuff. Really good info
@CharleyPangus
Жыл бұрын
Appreciate it man!
Brilliant vid... Thanks so much :-)
@CharleyPangus
4 ай бұрын
Anytime 🙏🏼
Thanks for the info charley... I learn a lot with this video but is it possible if i do halftones with multiply or screen blending option for fade gradient in Photoshop object?
I want to learn graphic designing what’s the procedure????
Stone Cold Print Austin gave some really nice pieces of advice
Very gooood!!! Thanks for this content! 🤩❤
@CharleyPangus
Жыл бұрын
Anytime thanks for watching! 😁
Right at 8:05 I thought my laptop got fucked up. Thanks for the cardiac arrythmia.
Thanks Charley!!
@CharleyPangus
Жыл бұрын
You bet!
Great video
Thanks for this info
Did the price of the course increase? I was considering it but I feel like it was less than $350 at the time.
@CharleyPangus
Жыл бұрын
Yeah launch is around the corner. Promotion timer ended. We may do promotions in the near future.
@skatetheglobe
Жыл бұрын
@@CharleyPangus My procrastination screws me again lol. Thanks for the reply!
Design with transparent elements print well with DTG if you apply halftones.🎉😅 That said the print came out awesome.
@CharleyPangus
Жыл бұрын
I believe we mentioned the halftones too. Halftones are just super nice! Thanks for watching.
great video... thanks
Very informative video 👍
Hi, what the biggest size for DTG can print?
@CharleyPangus
Жыл бұрын
It varies machine to machine. Maximum is usually 16” x 21” but most machines can print up to 14.8” by 18”. Hope this helps.
@IanGruber81
Жыл бұрын
The better question to ask is, "what is the biggest I can dtg print on this t shirt or hoodie?" As Charley points out, dtg printers can print huge prints, however printers have to get the garment onto a palette. If you are printing a small shirt, it will have to be on a smaller platen, which will limit the size of the print.
@brightstar7155
Жыл бұрын
@@CharleyPangus Hi, thank you so much for the information Charley🙏🏻
As an average person, if I create a design using high resolution and a decent file size... Do I have to worry about this process or is my manufacturer the one who ultimately ensures the print comes out as expected?
@Blaziken19
8 ай бұрын
You have to make sure your file's dpi size is above 300, above 400 even better to be safe.
This Video is The Shit 🔥🔥Thank you so much for your Efforts in educating us 🙌 Appreciate it a LOT
@CharleyPangus
Жыл бұрын
Anytime, I’m happy you enjoyed the video man. 🙏🏼😁
Guys is there any way to print a big image on a sweatshirt without making the graphic too thick?
halftones bro please
Bet it would look even more dope if you remove the black ink.
@CharleyPangus
4 ай бұрын
Probably!
🦁👕 Have you tried DTF printing lion designs on t-shirts yet? Share your experience with us! @fastdtftransfer
Would’ve been perfect to just take out the black in the print since it’s going on a black garment
@CharleyPangus
Жыл бұрын
We tried it both ways
I bought some mock ups from mockshop but won’t let me download my mock up what do I do ?
@CharleyPangus
Жыл бұрын
send me an email Info@charleypangus.com
@blockbaby1571
Жыл бұрын
Just emailed you thank you
the Doc. Dr Disrespect lol
Fish Nisht
Far to slow to print
oh,and dr disrespect blows at gaming,even with pros.
@CharleyPangus
8 ай бұрын
What’s your point?
Please stop printed with DTG 🤦🏻♂️