Designing & printing my own tools - Elegoo Neptune 3 Pro
Тәжірибелік нұсқаулар және стиль
Check out this new 3D printer for Elegoo. The Neptune 3 Pro is basically very nicely upgraded Neptune 3 with a direct drive, dual Z lead screws and a better auto bed leveling system.
Elegoo Neptune 3 Pro Amazon - amzn.to/3haONhK
Elegoo Neptune 3 Pro - bit.ly/ElegooNeptune3Pro
Elegoo Neptune 3 - bit.ly/ElegooNeptune3
Filament:
TECSONAR Tricolor PLA - amzn.to/3H79d5N
PolyLite Silk PLA Blue - bit.ly/PolyLiteSilkPLABlue
PolyTerra Marble PLA - bit.ly/PolyTerraMarblePLA
PolyFlex TPU 95 - bit.ly/PolyFlex-TPU-95
Free 3D Files:
Articulated Axolotl - www.printables.com/model/2174...
Ring Holder Jewelry Organizer - www.myminifactory.com/object/...
3D Scanning Tools:
RevoPoint MINI - bit.ly/RevopointMini
RevoPoint Pop2 - bit.ly/Pop23dScanner
CR-Scan Lizard 3D Scanner - bit.ly/CR-Scan-Lizard-3D-Scanner
3D Scanning Spray - bit.ly/AESUB-3D-SCANNING-SPRAY
MARKERS FOR 3D SCANNING - bit.ly/MARKERS-FOR-3D-SCANNING
________________________________________________
If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that.
GomeowCreations.com/tools-and...
GomeowCreations.com/partners-...
Note: Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍
________________________________________________
Other Ways To Help Support The Channel:
My PATREON ➜ / gomeowcreations
One time support ➜ paypal.me/gomeowcreations
________________________________________________
Instagram ➜ / gomeowcreations
Facebook ➜ / gomeowcreations
________________________________________________
#elegoo #elegooneptune3 #3dprinting #diy #gomeowcreations
Пікірлер: 47
Elegoo Neptune 3 Pro Amazon - amzn.to/3haONhK Elegoo Neptune 3 Pro - bit.ly/ElegooNeptune3Pro Elegoo Neptune 3 - bit.ly/ElegooNeptune3 Filament: TECSONAR Tricolor PLA - amzn.to/3H79d5N PolyLite Silk PLA Blue - bit.ly/PolyLiteSilkPLABlue PolyTerra Marble PLA - bit.ly/PolyTerraMarblePLA PolyFlex TPU 95 - bit.ly/PolyFlex-TPU-95 Free 3D Files: Articulated Axolotl - www.printables.com/model/217417-articulated-axolotl-multicolor-remix/files Ring Holder Jewelry Organizer - www.myminifactory.com/object/3d-print-ring-holder-jewelry-organizer-147505 3D Scanning Tools: RevoPoint MINI - bit.ly/RevopointMini RevoPoint Pop2 - bit.ly/Pop23dScanner CR-Scan Lizard 3D Scanner - bit.ly/CR-Scan-Lizard-3D-Scanner 3D Scanning Spray - bit.ly/AESUB-3D-SCANNING-SPRAY MARKERS FOR 3D SCANNING - bit.ly/MARKERS-FOR-3D-SCANNING ________________________________________________ If you are looking for more tools and materials that I use, well you're in luck! I made a page on my website just for that. GomeowCreations.com/tools-and-materials GomeowCreations.com/partners-discount-codes Note: Most of the links that I use that go to products are affiliate link. This means I make a small commission on anything that you happen buy using them. This is at no extra charge to you and this helps support the work I do on this channel. 😁👍 ________________________________________________ Other Ways To Help Support The Channel: My PATREON ➜ patreon.com/GomeowCreations One time support ➜ paypal.me/gomeowcreations ________________________________________________ Instagram ➜ instagram.com/gomeowcreations/ Facebook ➜ facebook.com/GomeowCreations/ ________________________________________________
Just ordered a Pro last week! :) It is my first 3D printer, and I've heard such great things about it!
Wow. Can’t believe how far printers have come.
Nicely done! There is a 2nd file for a tool holder for the N3Pro that’s on the Micro SD card. Not sure why they didn’t put it in the main folder location.
@GomeowCreations
Жыл бұрын
Oh yeah, I found that later on after looking at the SD card. Luckily I don't need tool holders anymore due to just having one kit for all the printers now 😁👍
Great Video. Thanks so much!
I’ve been using my original ender 3, with upgrades, for so long now. I need an upgrade and the 3pro looks like exactly what I want, and the price is fantastic too!
@GomeowCreations
Жыл бұрын
Yeah I know what you mean by having an ender 3 with upgrades haha. This is a really good out of the box printer for sure. Especially at this price point.
I haven't bought this yet, but I watched some reviews and I think this is a great machine.
I would say the upgraded one is very impressive
@GomeowCreations
Жыл бұрын
Very much so 😁
At the moment Neptune 3 Pro seems to be a great first printer, but not the one some enthusiast would be able to tinker with without building a whole new machine. It's not a bad thing per se, but it would be good to know. Besides the all-metal hotend there is just one other upgrade I found so far: an additional thermal insulation layer for the build plate.
I don't want to spend anymore money upgrading my Ender 3 Pro so i just ordered the Neptune 3 Pro. The main reason is because I can easily print tpu as I haven't been able to get good results on my ender. Petg also gives me issues on it. It prints pla just fine though. I'll definitely keep it as a back up.
Nice job, good review. Definitely need to check out the other channel good to see the printer being used to build useful things, trinkets would lose it novelty pretty quickly
@GomeowCreations
Жыл бұрын
Thanks and yeah I'm going to be doing a lot on the other channel for sure. I have a full electric car build coming soon 😁👍
@jeffholmes1362
Жыл бұрын
@@GomeowCreations what is the Chanel name so I can find it please
Thoughts on this vs the Sovol SV06, vs the Creality Ender 3 V3 SE for a first printer? Print size/speed don't matter to me. Nor the price differences between these. I mostly want to be able to print precise functional parts, on the smaller side
❤️❤️❤️
I just recently got this printer, what does that kever st the top of the extruder do? 0:50 for refrence
Is there any difference between this and the Neptune 4 pro ?
What kind of computer do I need for this 3D printer?
I have a quick question: Is the size mentioned on the website (475*445*515mm) the actual size with the filament holder and the Display on the side or does the printer needs more space to stand somewhere? (I'm asking because I would like to put it in a cupboard which has a height of 550mm and a depth of 520mm.)
@GomeowCreations
Жыл бұрын
So with the spool holder on it and a spool on it as well it's 736mm tall. If you take that off it's a little over 515 tall.
@navy53al51
Жыл бұрын
Thank you, I thought so but wasnt sure. So I need to put the spool on the side If I would like to put IT in the cupboard :)
Have one on order. Seem to be made of unobtanium.
@GomeowCreations
Жыл бұрын
Yeah it seems that always happens when elegoo comes out with something and after some time they are easy to get.
I already have one but where are the Tools from title?
@GomeowCreations
Жыл бұрын
What do you mean?
where or what is your second channel?
@GomeowCreations
6 ай бұрын
KZread.com/@RandyMay
I see your 3 pro shows the image of the models. mine doesn't. Why? thanks for your help
@GomeowCreations
Жыл бұрын
What slicer are you using?
@varosinorber5349
Жыл бұрын
@@GomeowCreations cura 5.2.2, but I tried the factory elegoo cura too. only the elegoo logo on the screen
👍👍👍❤️
@GomeowCreations
Жыл бұрын
😀
@duocmat5192
Жыл бұрын
@@GomeowCreations ThanK you 👍♥️
If possible to use .8Nozzle?
@GomeowCreations
7 ай бұрын
Yes
Mandalorian
@GomeowCreations
Жыл бұрын
I made that ring in this video kzread.info/dash/bejne/lHZ1zatwaJCTk6g.html
@sticustom
Жыл бұрын
@@GomeowCreations yes I watched it. I love it. I only commented that as I have never 3D printed, I wouldn’t know what I’m talking about but I love watching videos on it. I’m lucky to draw a circle. I love that ring. Keep up the good work.
Axolotl, but it's pronounced: A-ho-lo-te
@GomeowCreations
Жыл бұрын
According to Google it's ak-suh-laa-tl
cool review but this printer is already out of stock 😵💫
@GomeowCreations
Жыл бұрын
Yeah I'm late on making this due not being able to talk from COVID 😅 they will be back in stock but you will have to check on them. If I find anything out about the restock I will post about it.
@Warbeaver
Жыл бұрын
Yah. Can't order. Zero order.
@keldonator
Жыл бұрын
Back in stock today, was out yesterday