DENON "PMA-2000" Series Timeline. Series begins with the first model in 1996 and run for 20 years with different generations, until replaced by PMA-2500NE in 2016. PMA-2000, December 1996. PMA-2000 II, May 1998. PMA-2000 III & PMA-2000 IIIR, January 2000. PMA-2000 IV and PMA-2000 IVR, March 2002. PMA-2000AE, July 2005. PMA-2000SE, July 2009. (PMA-2010AE in EU & Aussie?) PMA-2000RE, October 2012. (PMA-2020AE in EU & Aussie?) Replaced by New Series. PMA-2500NE, February 2016. (Current) Note, No RC For First Two Generation. 3rd "IIIR"and "IVR" 4th Generation with RC option, RC is standard after 4th generation.

@damianzaninovich4900

4 жыл бұрын

Great review, today I bought a pma a100 from TMR for $1580. Nearly 60lbs and I’ve wanted this particular model for awhile.

@Tharbamar

4 жыл бұрын

It's a very good amp, Audioholics have detail measurements of A100.

@damianzaninovich4900

4 жыл бұрын

Thanks I just like the way it’s made and in Japan for many years with nearly the same basic tried and tested design. I bought a Denon 301 MC for it on a Technics 1500c.

@Tharbamar

4 жыл бұрын

That’s great I also have DL-301MK2 that I really like, enjoy your music, thanks

@bs11100010

4 жыл бұрын

@@Tharbamar I was thinking of ordering a pre owned pma-sa11. It seems like it should be mostly the same as the sx11 and can be had for 2k less than the new one. Paring it with my revel m126be.

I have this amplifier Denon PMA 2000IVR. He doesn't sound bad, but the Denon PMA 1500R2 is unbeatable. The Denon 1500R2 has a very natural instrument sound, It is a very emotional device.

Yes, this is an amazing amp. So many people overlook these Denon amps. These Denons are probably the only amps, I would say, that truly punch above their weight in terms of cost. I have always heard that 'this or that' audio product is worth more than its cost, but most of the time this is not true as the products being compared are over priced to begin with.

This guy could be threatening to kill me and I won’t be scared because of his calm voice.

@202One

3 жыл бұрын

😂

@cameronkrause4712

3 жыл бұрын

I feel like I am being hypnotized when he is speaking- but it really calms me down.

I have this Denon PMA 2000IVR with Denon Blue -ray/cd DBT 3331 U combo and Denon 810 cassete paired with Infinity Ren 90 and it sounds just great.

I've used this exact amp in my main system since 2008. Everything said in this video jives with my experience perfectly. It's very powerful & well built, with a clean, punchy, and controlled sound. I even had the same problem with the input selector. After using the amp for about 9 yrs, the input would randomly change without me touching anything. It was really frustrating. I took it to my local Denon authorized service center. They cleaned out & re-lubed the potentiometer, & it's been back to perfect since then. Great, great value. I also plan to keep mine for a lifetime.

Thanks for your goodwill greeting! I've had this amp since 2001 absolutely love it. No bells and whistles just great sound. Great imaging, sound stage, quiet great bass. Could not believe the price 1000 $ well worth it. Too bad They don't build them like this any more.

Great video , thanks for taking the time to share with everyone !

Thank you very much for these videos. I'm a headphone+class A guy, but I always love learning about the related audio domains. Stay safe!

Denon has fantastic products,i had many denon products and work with Denon equipment,and love the sound quality and construction quality and aesthetics..the new 110 line are simply amazing.

I love Denon, you get so much value for money from their budget line of amps, they even rate them at 4ohms which not a lot of companies do at the lower end, Steve Guttenberg from Audiophiliac was really impressed by the budget Denon PMA-600NE, and that was powering Kef LS50's!!

I wish you and your family safety during this crisis. Thank you for your opinions on the amplifier.

Based on this video I bought a Denon PMA 2000r in a mint condition a week ago just to try it. I love it. It has been serviced. After a few high end amps fare more expensive this One is The best. THANKS mate for your good advise

Salute to you bringing us great reviews durring these trouble times you & family stay healthy been thinking about purchasing this amp..I will 🤙🤙

Nice to see people still appreciate the critical listening environment! I do so much.

That is exactly how I feel about my Yamaha 2100, solid build quality, nothing that will become dated over time and since I still have my first Kenwood integrated at 32 years old I feel safe saying the Yamaha will last a lifetime. Of course it has already gained a tube based sibling, but aside from the warm tone they both have very different strengths. What seemed like good value to me sitting just below the Yamaha 3000, now seems ridiculous value sporting the same topology and balanced circuit as the $20k separates. I can't wait to hear the Demon at 500hrs. Enjoy, my friend.

I would say my POA-6600 mono blocks with DAP-5500 are the Grandparents to this. I’m still using the preamp in my system. And the mono blocks are still used when I choose not to run my tube amps They have been used with my Martin Logan Sequel IIs also purchased in early 90s. I’ve not had any issues running the Logan’s with the POA 6600. Build quality is very good copper shield as seen in your video. I’ve been very happy with them other wise I wouldn’t have kept them all of these years. I do use my tube amps 98% of the time now but the POA are hooked up and ready to go!!!

I recently bought 2nd hand pma2000R that i play in my garage combined with old jamo x870 power hungry speakers, sound is amazing never heard so nice that speakers before. Also my main system in an AVC6500 HT amp combined with POA2800 monster power amp.

Thats a badass amp period ! My Sansui G-8000 was 975.00US new in 1979 built in japan and the toridal transformer is the size of most amps now days lol and it scales like no other amp i have owned even better than my HK 990 which was good . I have owned many Denon amps and i like the Denon sound muscler and they sound great on most budget bright speakers the warm/richness really calms down metal dome tweeters and horns . I have bought over a dozen amps from the end of 2018 till now and for the money the IOTAVX-STACK (Nakamichi) has blown me away basically 2 separate mono amps one for each speakers this gives you alot more power 2 wall plugs ins but your getting 240v instead of 120 !! So musical with amazing midrange . But so glad you sticking with Denon I absouletly love Denon also ! Very reliable !

@Tharbamar

4 жыл бұрын

You need to stop buying amps, I think you have too many of them 😁

@tee-jaythestereo-bargainph2120

4 жыл бұрын

@@Tharbamar having alot of amps help me alot with reviews , because me subscribers have different amps then me. So i use cool netural warm amps , speakers sound so different and when pared with the right amp by finding that Synergy is fun to do . I het surprised all the time . But haven't had much time lately, working almost 80 hour work weeks wearing me out ! Even during this shutdown BMW still wants us to make them parts their greedy ! I think the Governor of my state about to shut us down !

@tee-jaythestereo-bargainph2120

4 жыл бұрын

@@Tharbamar check out my new cummunity pic ? 😆

Appreciate your work. Good health to you!

@Tharbamar

4 жыл бұрын

Thank you.

very well built

I really really thank you for this review in particular as I am aiming to get the PMA-2500NE. There is no reliable review on youtube of the 2000 series up until now.

@Tharbamar

4 жыл бұрын

It’s a very good amplifier, I think you will like it, thanks

@tess6499

2 жыл бұрын

@@Tharbamar which one is better pma 1500RII or 1510ae ? Thanks a lot!

@Tharbamar

2 жыл бұрын

@@tess6499 AE is newer model with some improvements.

Nice amp..old but one of the good ones.

This guy seems super nice!

Great review

Pretty Beast......Thanks for this. Stay safe.

@Tharbamar

4 жыл бұрын

Thanks you.

Great intro, great video. You are good people. Thumbs up and subscribed.

I've noticed switching contact problems for last 60 years, it happens with all hi fi/stereo comp. one must use contact treatment and constant check levels, even jack/plug gold contacts will change.

@chuckmaddison2924

4 жыл бұрын

i agree mechanical switching has always been a pain.

Recently came across a denon home theater had never heard one and i was lucky to pass by a shop they were advertising it ..had its two subs and four surround speakers....the sound was so clean and way too powerful for a home theater...even some P A and disco systems cant be compared to these Denon home theaters

I have the PMA-2020AE and i still keep my old Denon PMA-2000AE, great amplifiers.

@Tharbamar

4 жыл бұрын

These amps will last very long time for sure.

@Rayradityaa

4 жыл бұрын

is it signifikan different between 2020ae and 2000ae?what about the sound sig of denon amp. every people on google say denon amp have bright and lean sound is it right? i am interest with 2020ae

@82ivaylo

3 жыл бұрын

@@Rayradityaa The PMA 2020AE is more lively, overall better sounding amplifier than PMA 2000AE. Denon sound is not bright.

@Rayradityaa

3 жыл бұрын

thanks for reply, finaly i already buy 2020ae and yes i like the way it sound. not bright at all..

@82ivaylo

3 жыл бұрын

@@Rayradityaa Congratulation for your new Denon. I will say it s warm sounding amplifier with good 3D soundstage .

This is a very good, old-style, amplifier, made when people made beautiful things.

I have the pma-a100 also a very good amp.

Get well soon Gene

I bought the Pma 2000 MKIV in 2006 and It Was a reliable amplifier for the last 14 years, the Problems I had Was also the imput selector and the Balance Volumen(Power Bias, left Channel was playing louder than the right one)

@dwr4992

3 жыл бұрын

A "dirty" balance pot can cause issues with the balance just as a dirty selector switch pot can affect the input selection. Clean both with de-oxit or similar evaporative contact cleaner. Do not use WD40 or RP7 or similar lubricant as these can damage the circuitry. I also own a PMA2000. Sensational amp for the money.

@Constantin1020

3 жыл бұрын

@@dwr4992 thank you for the advice, I allready cleaned both whith a Potentiometer cleaner, the imput selector worked well for a one month or so after that It startet all over, cleaning the Volumen potentiometer didnt work at All sadly. I tryed this process several Times. Greetings from Austria

I enjoyed your review. I too appreciate Denon’s muscular, solid, dynamic sound. I recommend tower speakers though for a serious listener such as yourself.

The Lexus of Japanese Audio. Totally agree with the Parasound comments !

Dear Friend, Hello I was just about to put this Danon amplifier aside Because I bought Nime Audio/AMP/DAC and it's much, much better than Danon FOR FOCAL 1008 BE ELACTRA then I bought speakers B&W 801 S3 And suddenly I discovered this amazing amplifier just moving the loudspeakers with a huge power ....huge bass and amazing and awe-inspiring treble & MIDS Stage width and depth that probably would not have been possible without this amplifier Even so much power is barely 11 o'clock {In the previous format I used the DAP-2500A Pre Amplifier } Now only his PRE. My source SONY XA-50ES DCD-1650AR SA-11 S1 MARANTZ DCD-3560 DENON I also connected MIT MH-750 cables instead of VHD-122 which have accompanied me for another C-12 years since 1990 My amplifier has a logon problem suddenly for no reason jumps me to another IMPUT logon or clicks on Sony's RC and suddenly jumps from CD to tape e.g. I follow your movies you definitely have something to say about audio. Thank you IL Soon a short film was uploaded on the system

This is like audiophile ASMR.

Do you think a used PMA-2000 IVR will be better than a new PMA 1600NE ?

Recently bought a used PMA-2000AE from Japan, USD900 shipped to my country. Paired with my Wharfedale Evo 4.2, the amount of bass produced is crazy. Big difference compared to my previous Yamaha stereo receiver Amp. (100W/channel). I enjoy the sound from this Denon very much and it can go crazy loud. Many thanks for your excellent recommendation Tharmabar.

@Tharbamar

2 жыл бұрын

Yes they are very good, hard to find better quality in the same price range used or new, especially with dual mono design, thanks

I am still using my 35 watt STASIS NAKAMICHI RECEIVER! Plenty of power to drive KLIPSCH FORTE ONE SPEAKERS...

Mine is a Technics SU-V900 , they both are on the same level?

I think power MOS amplifiers are more reliable than bi-polar. Rock solid Hitachi MOS in my Kyrocera receiver since 1980, no thermal runaway, the reason, voltage gain works better than older current gain equipment.

@marianneoelund2940

4 жыл бұрын

Regarding robustness, the main difference between BJT and FET is that BJT has limited safe operating area, so the output devices need to be carefully protected against even moderate current when Vce is high. FET devices are only power-dissipation limited and therefore more rugged. But both types of output stages are current-gain stages.

Hey there, recently denon launched their 110 years anniversary model which is the newer model to the PMA 2500NE so i guess you should have a look at at as it has some upgrades including a good power supply

@Tharbamar

3 жыл бұрын

Thanks I will check them out but now I’m using SX-11 as my main amplifier.

@paramvachhani9569

3 жыл бұрын

Ya i love the way SX 11 sound love your setup

Nice amp👍 Any idea how it compares to yama as-2100?

All old DENON products are good. Unfortunately i cannot say the same about their new stuff. With a great sorrow i think that the golden era of that company is over and there will never be such a quality products as they made in the early 90-ies. 😢

Hi @Tharbamar, I have a B&W 607 S2 speaker, and I currently own an Audiolab 6000a amp with a Chord Mojo 2 as a dac, and I really like the soundstage, the holographic sound, and the separation of instruments in the 6000a, but the 6000a lacked warmth in the midrange, and now I need a warm amp with big soundstage. and with dynamic holographic sound, I thought about the Denon PMA2000AE. What do you think? Will it give me what I want, or are there better options for my speaker under $1000?

How much of a difference is there between this and the PMA1500R?

Hi I saw a Denon PMA-2000R for sale online. The description said it was in good condition. The add said that everything is working like new except the phono stage selector. The ad says it makes a popping noise when you select MM or MC. After its selected no issues with the phono stage. Is the popping of the phoo stage fixable by any chance? Thanks!

@xcvbxcvb2179

2 жыл бұрын

Do not change phono selector when the unit is under power! Turn it off and wait a minute before changing between mm and mc.

Thank you for your relevant and concise reviews. Recently Denon has introduced the NE series .From the Japanese website and interviews given by the designer (sound master) the NE series marks a new beginning.Sound is following a vivid and spacious design thinking.Using the 600NE and it has great price/performance . If i have understood correctly as i cant read japanese but the diagram shows that all the NE series is a single stage amplifier. I have auditioned the 520AE and 720AE .The NE is a clear stepup while maintaining the best of the earlier models.and I would request you to consider auditioning the NE series .(Disclaimer : No affiliations)

@nareshnarasimhan9774

4 жыл бұрын

NE series i mention is wrt the 600 and 800 models. You mention PMA-2500NE, February 2016 . So i infer this introduced in 2016 itself

@Tharbamar

4 жыл бұрын

2500NE is dual mono design with good power supply, I’m not sure about models below that, right now I have SX11 as my main amplifier, thanks

@nareshnarasimhan9774

4 жыл бұрын

After further translation to english from japanese from Denon Japan blog its good to know that the entry NE models are also designed /overseen by Takashi Arai San who did the SX design

I have the same problem with my Parasound (sound balance) but its not the amp, its the preamp, because when I put HT bypass on it goes away.

@socool8860

4 жыл бұрын

My p5 had the same issue after several repairs from parasound they replaced it with the new p6 and it was much better sounding too with no issues

I bought this series model in 2001 new. No problem at all for 20 years. I turned off power only couple of times, maybe that's why.

@Tharbamar

4 жыл бұрын

I like to leave them on as well, only turn it off while I’m out of town.

@theangs1

4 жыл бұрын

Much thanks for your informative reviews. Can I ask why do you not power off the amplifier even when not in use? Do you leave it power on or in standby mode most of the time? Thanks again.

Hi, Any clue what power cable I can use with this unit? I was lucky to thrift this unit but don't have the power cable. I am willing to use one of your affiliate links if you can link me to one that would work properly with this unit. Thanks!

I have PMA 1600NE it sounds very smooth. If it worth to get another PMA 2000IVR in my system or any different comparison between PMA 1600NE and 2000ivr

Hermoso amplificador cual es su valor

Amazing video as always buddy if you ever decide to sell it please let me know

@Tharbamar

4 жыл бұрын

Thanks

Using parasound p5 pre and facing same issue.. unbalance sound between left and right channel.. Feeling cheated

How is Denon pma1060?

Do you have any information about its damping factor???

maybe one day

9:16 do those RCA metal caps short the terminals? I read somewhere they will do damage to RCA outputs if you accidentally turn on those outputs

@Tharbamar

4 жыл бұрын

It won’t get short because the one I use has no center pins.

@spinvalve

4 жыл бұрын

I feel better now. Love your videos btw. Big fan.

@favorit601

4 жыл бұрын

Most metal-caps are on input sockets. This is for try or for believe because most of them are not at some Megaohms but shortened by 47kOhms inside. If the socket is an output socket, there is no use to shorten it. If you do, it depends, whether line output amp is of low impedance / high current (some high end preamps are, e.g. Symphonic Line), shortening may harm at high volume, when not designed correct (in case, nobody does short an preamp output by purpose, it‘s like shortening a power amp). But in most cases it doesn’t harm, most preamp outputs have still some 50 Ohm to 2kOhm output impedance.

How would you say this compares to the A110? I decided to purchase the A110 instead as it’s readily available in North America.

@Tharbamar

Жыл бұрын

A-110 based on same design but much better quality than PMA-2000IVI series.

I learned from your experience with this amp that one can never judge a component without 1st hearing it yourself. Should have known that before, feel kinda stupid that I fell into that trap!

@Tharbamar

4 жыл бұрын

What kind of Amp do you ave now?

@michaelmityok1001

4 жыл бұрын

@@Tharbamar i have 2, kinki studios EX-B7 monoblocks and EX-P7 preamp, and a sony ta-a1es integrated that i sometimes use instead. The monblocks are class a/b and the integrated is sorta class a. They sound very different, and i dont have a clear preference. My speakers are bowers and wilkins 702 s2s. I want to buy the denon you have but only if your experiment turns out good, or i will buy the new nad m33 integrated class d, very curious about the class d module in the nad.

@Tharbamar

4 жыл бұрын

I will make a post to answer all your questions about SX11 in a few days, thanks

👍

Hello, do you know maybe a model(s) which use the same poweramp? Thank you in advance.

@Tharbamar

4 жыл бұрын

All 2000 series and 2500NE amps are using same or similar power amps design, thanks

I see there’s a few on eBay but not sure if I would trust buying one there

👍 🎉

Hello. At first i would like thank you for this video. Im searching for new amplifier for my "Quadral rhodium 90" speakers. Because im using Denon PMA-710AE at now. Im interested in higher grade amps from DENON and pma-2000 looks pretty nice. As competitor to PMA-2k im considering ONKYO A-9000R which is little cheaper on our bazaar and looks pretty solid too. What is your opinion to ONKYO A-9000R and my whole dilemma? Thanks for answear. Stay safe

@Tharbamar

3 жыл бұрын

I do not have experience with Onkyo A-9000R to give you right advice, PMA2K series is overbuilt for the price back in the days, as you can see how much Denon is selling PMA110 in today’s market which is very same design with some upgrades, thanks

Neef You tot correct the timeline: there are 3 series now: the original 2000X-series, the 'AE'-series and now the 'NE'-series.

I have been considering spending around $2,000 to $5,000 on a amplifier. I may go this route instead. Did I see a video with you getting a newer amplifier? What are you currently using? Nice video, I like to see what's under the hood!

@Tharbamar

2 жыл бұрын

I got this one, thanks kzread.info/dash/bejne/eZOKmpaeg9rLYNY.html

What recommendations on stronger amplification the type of power that can drive most of the speakers out there with finesse. That to me is most important because I've changed speakers out many times and i prefer an amp to keep up with my pace, if i come across a speaker at a very good price i don't want to not get it because i have a bookshelf amp. I am about to upgrade my parasound a21 i haven't had any problems with it but it's time to move on. Something less than a used car.

Please tell us the difference compare to SX11 !!

@Tharbamar

4 жыл бұрын

Yes for sure, thanks

Hi Tharbamar, did you manage tot set the bias yourself? Greatings from Ralph.

@Tharbamar

3 жыл бұрын

Bias was within factory spec last time I checked.

Is there a difference with the 2000R and ifso, what are they? Thanks

@Tharbamar

7 ай бұрын

2000IV series has improved Pre section compared to older models.

Hi, how hard is it to clean the selector switch? (Mine is acting up.)

@Tharbamar

Жыл бұрын

Not very hard but not easy either because you have to take out front portion of it but for time being use AUX 2 which should stop it from acting it up.

What does the Denon sound like with the Wharfdale Diamond 225’s? I know you have reviewed them before. I love the look of these speakers, and are on my list to audition.

@Tharbamar

4 жыл бұрын

Sound is very good, I think you will like it.

Sir. please suggest a good stereo integrated amp under 1000 usd. Thank you

@Tharbamar

4 жыл бұрын

Marantz PM8006, Denon PMA-1600NE is very good choices. Thanks

Hi nice video. What's the deferences with model pma200r? Thank you

@Tharbamar

3 жыл бұрын

Different generation and a little different in pre section.

Hi, this amp seems great, is it possible to connect a subwoofer?

@Tharbamar

3 жыл бұрын

Yes there is pre out. Thanks

I have

How is the denon PMA-2000R compared to the IVR ?

@Tharbamar

3 жыл бұрын

IVR have better pre stage.

Any hum from its transformers? No matter how small or negligible it is, is there any detectable by human ears?

@Tharbamar

4 жыл бұрын

None.

I got the PMA 720 do I need an upgrade or is this still a great amp?

@StagnantMizu

17 күн бұрын

the one from 89

i dont agree you any more. If i've gotten R3 Speaker, I will invest PMA-2000IV amplifier. It's a germ because of its rare

Power board look’s like Sansui with Elna Silmic

2500 is not dual mono, just differential. Not sure about 2000 though.

Berapa harganya../price....?

Hi sir im one of your subscriber ask please i saw at Crutchfield website about denon pma 1600 ne need your advice please sir if this integrated amp is good in term of sound quality!? Right now im using a denon av receiver 800h connected to my CD player and Pro ject carbon dc turntable and my bookshelf speaker is triangle bro 3. Thank you sir and god bless!

@Tharbamar

4 жыл бұрын

It is very good sounding amp for the price and come with very good DAC as well, it will sound great with your speakers, thanks

@rega1039

4 жыл бұрын

Tharbamar, thanks a lot sir 😊 appreciate

@janisfedorovskis8192

4 жыл бұрын

Thank you so much for this question. I am also looking at the 1600NE since "the internet says" it offers a very close performance to 2500NE but for quite less of a price. However I see that I have several 2000AE and 2000R on the used market and paired with a DAC e.g like the Modi3 / topping D50 / SMSL SU-8, or even Node2, it then comes same price or even cheaper than a new 1600NE... which beggs the question , IS THAT A WISE STEP?, and what could be the major sound differences there? (Set aside the size differences and the fact you have more separates)

I have the smallest model of all the pma2020 series, power consumption is the only one with 360W, 136W 8Om and as much as 247W. Supposedly better than pma2500. Because it doesn't have to give on board, it was only in cd USB b.. Is Denon pma2000IVr. Do you think 700 dollars but is it worth replacing pma2020 has pma200p

@Tharbamar

Жыл бұрын

Sorry I didn’t understand which model you’re referring to, please include the model number you have to understand better but newer models have better pre stage but all 2000 series have same power supply design.

Any one know that 2 transformer are mono design or 1 is for power amplifier section and 1 for the pre amplifier? I didn't find and information about this, thank you.

@Tharbamar

4 жыл бұрын

I have the manufacturer spec sheet in the video if you missed it, it is dual mono design and power output is a lot more than rated by Denon.

@dominicmota5564

4 жыл бұрын

@@Tharbamar thank you, I have the 2500 but I still don't know the details. Ha ha You know what, I using a luxman CL88 vacuum pre amp and I bet the sound quality for me at least 20% better!! I used to use CL88 and MQ88 but now I keep the MQ88 in my garage and that Denon 2500 doing a very good job.

compare to Mark Levinson 383 please

Between denon pma 2000 ivr and yamaha A-S1100 which one will you pick

@Tharbamar

4 жыл бұрын

I would still go for 2000IV R for dual mono design personally, may be much better power supply as well. AS2100 is more comparable in my opinion. In their home market Yamaha AS-2100 and Denon PMA-2500NE (successor of 2000 series) are direct competition.

@dr.anthonyforgione4253

4 жыл бұрын

Denon for sure!

@jameschan2404

Жыл бұрын

What about Yamaha AS 1200 vs Denon PMA 1700n? Thanks

Whats the difference between the 2000ivr and 2000r i can get the 2000r for 600$ used

@Tharbamar

3 жыл бұрын

IVR have better pre section and remote control, 2000 does not come with remote control.

what product did you use to dampen inside the chasis?

@Tharbamar

4 жыл бұрын

I'm Using: Dynamat amzn.to/34qgQyP

@myplaguesify

4 жыл бұрын

@@Tharbamar btw does changing the power cord affect the sound?

would you say Denon is a safer choice among other "modestly-priced" brand like Marantz, Onkyo, Cambridge Audio?

@Tharbamar

4 жыл бұрын

Not necessarily, I look for inside of any amp for quality of the parts and design, I would start from there., IMHO, for company like Denon can last for 100+ years and still top selling brand in home audio market means a lot to people like me as proven performer, all of their mid range to top end models were produced in Denon’s Shirakawa Audio Works in Japan, which they're very proud of it. thanks

@mykeldg

4 жыл бұрын

@@Tharbamar thanks for the reply, appreciate it. I am looking into Denon amps lately most especially since you picked it over PS Audio and Luxman amps. I only have an Onkyo 9150 which is great but your videos got me curious about denon amps.

@DueM

4 жыл бұрын

denon are great the only work you'll have to do is on the relays, cambridge audio use substandard caps and are prone to dry solder joints. marantz are similar to denon but can have transformer hum.

@mykeldg

4 жыл бұрын

@@DueM thanks for the inputs. what baffles me is marantz is supposed to be the upscale sister company of denon yet the marantz vs denon amps ive heard at the same price point, marantz seem to sound inferior. (i used to have pm5005 and even my onkyo sounded a lot better)

@tee-jaythestereo-bargainph2120

4 жыл бұрын

Mu Sansui G-8000 is 40 years old and still going strong ! Its rated at 120 watts but it has weight to the sound !

whats the damping factor of this amp?

@Tharbamar

4 жыл бұрын

700+

This is a great tutorial"leaving my footprint here and im waiting for your turn thanks

But , can we get this Amplifier in the Us ?

@Tharbamar

4 жыл бұрын

Yes, you can in AC 120V.

@user-re8xu2pj5q

4 жыл бұрын

Tharbamar I couldn’t find any probably has different model name?

@Tharbamar

4 жыл бұрын

Model name is the same all over the world, PMA-2000 IVR was last available for 2006-7 in the U.S. after that they stopped selling here, but they released PMA-A100 (same innards) for 100 years anniversary model amp and that was it, your best bet is US audiomart or auction sites to find one.

Nice. Power supply is strange. There are only two big caps for power stage. Parallel transformers? One for the preamp? There are very many Elma Silmic II high damped caps inside. Does it sound dynamic?

@Tharbamar

4 жыл бұрын

It’s not strange for Japanese design amps, this amp is dual mono design, sound is dynamic and powerful, thanks

@favorit601

4 жыл бұрын

Tharbamar Just found schematics. Symetric +/-56V for the power amp. One big cap for + and one for - with no channel-separation. So there‘s one transformer for + and one for -. Uncommon.... Might be designed because space was long, but not wide enough for one transformer.

Ok