I used the info just to clean the dust from fan. Great help. Thx a lot buddy!!!
@HUMMERSCHLAG
6 жыл бұрын
You are wellcome :)
@hotsauce7232
6 жыл бұрын
My Dell is right now at 90 degrees celisius and I'm considering doing those steps . After applying all steps in this video how many degrees did your laptop temperature decrease ?
@EdinYah5 жыл бұрын
*Thanks for sharing @Radu.* *But I think that you have put too little thermal paste??!*
@milosmil Жыл бұрын
Do I have to change thermal pads also, and what is it's thickness?
@bahadr43315 жыл бұрын
What is the blue liquid 23:48 you wiped away the thermal paste??
@kumarasmit74313 жыл бұрын
Hello, I was looking to replace my thermal paste but the motherboard screws are rusted and cannot be opened. The rusted screws will just slide over the screwdriver without rotating. What should I do? Thanks!
@catalingheorghe80646 жыл бұрын
After you replaced the thermal paste, what was the cpu temp in idle? I'm asking because I own a Dell N5110 with a i7-2670qm processor, that is staying at 60 when it's not really used.
@HUMMERSCHLAG
6 жыл бұрын
65-70 C when working hard and 55-60 idle
@creattive63417 жыл бұрын
informative one. I have the same model .can you tell me the name of thermal paste you used in this video.
@HUMMERSCHLAG
7 жыл бұрын
Hello there, i used Deep Cool Z5
@lifeinjammu5 жыл бұрын
Share the link for the tool kit ? Or where to buy, which brand .. I have the same model and have to replace the HDD
@HUMMERSCHLAG
5 жыл бұрын
Hey there. No special tool kit. Just screwdrivers and thermal paste. It does not really matter what thermal paste you use. Good luck. Just watched my video to change the thermal paste again :)
@abdelmageed23875 жыл бұрын
sound of van is high what i can do after i clean it
@abdelmageed2387
5 жыл бұрын
after i clean it
@himanshunegi_6 жыл бұрын
Isme apne jo bottle me aur injection use kie vo kya kya the???
@HUMMERSCHLAG
6 жыл бұрын
Deep Cool Z5
@iamindermahey3 жыл бұрын
can u solve vertical line in display after reassembling the laptop
@HUMMERSCHLAG
3 жыл бұрын
I don't think I understand your question
@iamindermahey
3 жыл бұрын
@@HUMMERSCHLAG there are vertical lines in my laptop dell inspiron n5110. after reassembling the laptop a single line is there then the line are keep increasing now. can u help to solve
@HUMMERSCHLAG
3 жыл бұрын
@@iamindermahey In my opinion, the monitor pins are not plugged as it should be. Unplug your monitor, check the pins (they might be damaged) and plug it back. That should do the trick.
@mohammedsuhailshaik44984 жыл бұрын
I have same model but I need to change my hard disk because, processing is slow that the prblm in my system soo segate.1TB hard disk can be supported are not bro please help me
@HUMMERSCHLAG
4 жыл бұрын
Hey Mohammed, please answer again. I want to help, but I do not understand your problem. Thanks!
@creampuff012
4 жыл бұрын
Try to change hdd to ssd
@MeharKingxGaming
3 жыл бұрын
yes its supported i.m using 1tb hdd
@johnsonsingh8285 жыл бұрын
This is the most I don't like Dell, for small thing to apply the thermal paste, needed to dissemble whole things .....
@HUMMERSCHLAG
5 жыл бұрын
I agree with you. I have this model, but I don't like it as it is very powerful, but the cooling system cannot do the job. It's like you would receive a Ferrari with wooden wheels.
Пікірлер: 30
Thus is very useful. Very very very thanks)
Thanks for everything
Thanks man
I used the info just to clean the dust from fan. Great help. Thx a lot buddy!!!
@HUMMERSCHLAG
6 жыл бұрын
You are wellcome :)
@hotsauce7232
6 жыл бұрын
My Dell is right now at 90 degrees celisius and I'm considering doing those steps . After applying all steps in this video how many degrees did your laptop temperature decrease ?
*Thanks for sharing @Radu.* *But I think that you have put too little thermal paste??!*
Do I have to change thermal pads also, and what is it's thickness?
What is the blue liquid 23:48 you wiped away the thermal paste??
Hello, I was looking to replace my thermal paste but the motherboard screws are rusted and cannot be opened. The rusted screws will just slide over the screwdriver without rotating. What should I do? Thanks!
After you replaced the thermal paste, what was the cpu temp in idle? I'm asking because I own a Dell N5110 with a i7-2670qm processor, that is staying at 60 when it's not really used.
@HUMMERSCHLAG
6 жыл бұрын
65-70 C when working hard and 55-60 idle
informative one. I have the same model .can you tell me the name of thermal paste you used in this video.
@HUMMERSCHLAG
7 жыл бұрын
Hello there, i used Deep Cool Z5
Share the link for the tool kit ? Or where to buy, which brand .. I have the same model and have to replace the HDD
@HUMMERSCHLAG
5 жыл бұрын
Hey there. No special tool kit. Just screwdrivers and thermal paste. It does not really matter what thermal paste you use. Good luck. Just watched my video to change the thermal paste again :)
sound of van is high what i can do after i clean it
@abdelmageed2387
5 жыл бұрын
after i clean it
Isme apne jo bottle me aur injection use kie vo kya kya the???
@HUMMERSCHLAG
6 жыл бұрын
Deep Cool Z5
can u solve vertical line in display after reassembling the laptop
@HUMMERSCHLAG
3 жыл бұрын
I don't think I understand your question
@iamindermahey
3 жыл бұрын
@@HUMMERSCHLAG there are vertical lines in my laptop dell inspiron n5110. after reassembling the laptop a single line is there then the line are keep increasing now. can u help to solve
@HUMMERSCHLAG
3 жыл бұрын
@@iamindermahey In my opinion, the monitor pins are not plugged as it should be. Unplug your monitor, check the pins (they might be damaged) and plug it back. That should do the trick.
I have same model but I need to change my hard disk because, processing is slow that the prblm in my system soo segate.1TB hard disk can be supported are not bro please help me
@HUMMERSCHLAG
4 жыл бұрын
Hey Mohammed, please answer again. I want to help, but I do not understand your problem. Thanks!
@creampuff012
4 жыл бұрын
Try to change hdd to ssd
@MeharKingxGaming
3 жыл бұрын
yes its supported i.m using 1tb hdd
This is the most I don't like Dell, for small thing to apply the thermal paste, needed to dissemble whole things .....
@HUMMERSCHLAG
5 жыл бұрын
I agree with you. I have this model, but I don't like it as it is very powerful, but the cooling system cannot do the job. It's like you would receive a Ferrari with wooden wheels.