Discord - invite.itjungle.eu If you have any questions, regarding Laptop repair and etc. you can join and ask for help.

Your video helped me fix my own laptop. You were quick, clear and to the point during the whole process. Thank you!

2022год, принесли такой же ноутбук с такой же проблемой, сделал как показано на видео - помогло, ноутбук работает! спасибо!

thanks, i was only here to dissasemble it, mine does not have a graphics card, mine sat in my grandparents barn for YEARS and its very dirty, so this helped alot

What material did you use for the graphics card?

@LaptopDisassembly

3 жыл бұрын

I put a little liquid flux.

bro i have dell m6600 + quadro 4000m. when i plug in charger then my screen goes black and hang with restart laptop. do you'll any solution ?

@LaptopDisassembly

3 жыл бұрын

Try with different working dell charger

@zgamestor

3 жыл бұрын

Ok i will try

My same laptop has black display but showing all the things with torch what should i do

@LaptopDisassembly

2 ай бұрын

Try to unplug and plug back again on the display side. If that doesn't help, you need to replace the display, probably have a backlid problem.

hello great video i have dell 5010 same problem ati graphic card with 8 bips i do the same that you do and perfectly i have my screen back but after the laptop shut down after half hour the probleme now that the card have hot tempurature and the pc shut down can you help me thanks

@LaptopDisassembly

4 жыл бұрын

Did you replace the thermal paste after assemble the laptop. Probably the laptop is overheating

@abidalab1020

4 жыл бұрын

@@LaptopDisassembly i replace the thermal and i check the ventillo it is good the problem is overheating how can i solve it thanks you

@LaptopDisassembly

4 жыл бұрын

If you put a good thermal paste and it still overheating, you may have a problem with the cooling pipes. Start the lapotop disassembled and check is the pipe heating evenly. If not the problem is there.

Brother how much temperature do you use to heat the chip

@LaptopDisassembly

3 жыл бұрын

I usually use 450 degrees for 15-20 seconds but all depend. Sometimes i heat for aboit 30 seconds... Depwnd on the chip size.

@killemall9068

3 жыл бұрын

@@LaptopDisassembly I did as recommended by you but the lcd remained dark and blank

@LaptopDisassembly

3 жыл бұрын

What is the video card... Also if yoy are shure it is from it try for longer time..

Where do you buy a new chip? How much does it cost?

@LaptopDisassembly

3 жыл бұрын

You can buy it from ebay or hklrf. Com. Ot is about 40-60$$ depend on the chip.

I do not have that chip in my mother board...what to do

@LaptopDisassembly

4 жыл бұрын

Try to heat it with hot air on 400-450 degrees for few seconds ant try to see will there be a picture.

@mohitshukla3447

4 жыл бұрын

@@LaptopDisassembly thanks for replying..but i don't have that chip on my mother board that you heating in video...so what to do?

@LaptopDisassembly

4 жыл бұрын

What is the problem exactly. And what is the laptop configuration.

@mohitshukla3447

4 жыл бұрын

@@LaptopDisassembly my laptop configuration is intel i3, 5ooGB/3gb. And problem is ..when i turn on the laptop it beeps 3 times and display is not showing..i have consulted laptop service centre few times but problem still there.. currently they suggested to change cpu ic.. please guide

@LaptopDisassembly

4 жыл бұрын

@@mohitshukla3447 Usually video problems is 7 or 8 beeps. 3 beeps can be different thing. 1. Messure the bios battery voltage. 2. Try reseting the bios, by shorting the battery pins with adapter and battery disconnected. 3. Try powering on without keyboard, or with one memory stick.

What is permanent solution for it

@LaptopDisassembly

3 жыл бұрын

Replace the chip with new one.

@nazzz0019

3 жыл бұрын

@@LaptopDisassembly chip specifications pls

@LaptopDisassembly

3 жыл бұрын

No clue.. It was a customer one. Just check the marking of yours. There are different revision, so to be shure just check the original one.

@nazzz0019

3 жыл бұрын

@@LaptopDisassembly ok.. Thank you so much for support