After publishing this content, I do get feedback that their LCD does not work. Just to share, besides the LCD on this deepcool unit, there are other liquid AIO that does have LCD panel. PC builders do have issues with those too. If you are one of them, you might want to check if you have updated the motherboard chipset drivers.. The file often have the extension of " .inf ". check your motherboard official website according to the model for the chipset driver. install it. I will share with you the steps if you do encounter LCD black out or windows not detecting the LCD. 1) Remove the application using Revo unistaller ( www.revouninstaller.com ) . Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller kzread.info/dash/bejne/p4Gbt7uikc7WqLA.html 2) Head down to your motherboard brand and model, at the support section, download the Chipset driver and install it Note : make sure to check the reversion of your motherboard if there are any. example X670E Rev.1 or Rev.2 3) Reboot your system, install the deepcool mystique application Hope this helps.

@TontNZ

3 ай бұрын

Don't just check the motherboard Brand and model, check the revision level of your mobo. Otherwise you may install the wrong chipset drivers. In my case revision 1 versions of my mobo used Intel network drivers, my board (revision 3) uses a different network chipset.

@KleoYan

3 ай бұрын

@@TontNZ good point.. thank you for the info.

@forwiiaremany1349

2 ай бұрын

I bought one of those to use with a new PC build, still have it in its shrink wrap but I have heard many people online complaining about overly loud pump sound/high pitch buzzing and there is no way to control pump speed as it always runs at 100% also the software/screen problems too on customer reviews. I am thinking of returning it for another AIO, can you please comment on the pump noise level compared to Galahad II and Kraken Elite. Thanks!

@KleoYan

2 ай бұрын

@@forwiiaremany1349 I have been running this liquid AIO for a couple of days now. There are no issues on this loan unit. As noise level to me is dead silence but if you dislike it, you can choose to change to others. I do not have any NZXT AIO to compare with this but as for Galahad II LCD, it's noisy at full speed 3600rpm till I tone down to 2880rpm.

Mate, I love how detailed your videos are. The effort you put into them is really appreciated

@KleoYan

3 ай бұрын

HI Shady Gouda, welcome back. I am glad you do like my content and thank you for your valuable feedback. It means alot to me and to motivates me further. 👍👍👍 Maybe I should explain myself, I am no different from you. I am a PC Builder too. When purchasing pc case or parts, I want to do it right and only one time. What we fear most are, PC Case or parts unable to fit or not compatible. Having all these consideration for myself, I feel it will be helpful for the rest, this will save precious time and to avoid the hassle to change parts. Once again thank you for your kind words and support. 😉

your videos are the most detailed and helpful ones for hardware on YT

@KleoYan

3 ай бұрын

Hi SunWalker, welcome to my channel and thank you for your valuable feedback. I am glad you like my content and to have visited my channel 😉

Thank you for showing all the LCD effect, been waiting for a creator who actually show one step by step

@KleoYan

3 ай бұрын

Hi JokerQuy, welcomde to my channel and I am glad you like my content. All the very best with your build 😉

This is my third watch on your content. You are doing a great job, keep it up.

@KleoYan

3 ай бұрын

Oh I James dean, welcome back and thank you for the support 😉

No one does it better than you. You might have the Asia accent but your willingness and efforts put into all your content is remarkable. Thank you for another excellent review.

@KleoYan

3 ай бұрын

Yo Nox, welcome back and thank you again. Greatly appreciate your support 😉

Thanks really cool and great quality video! I'm getting this this month Thanks again! Keep up the amazing work

@Platinumdose420

2 ай бұрын

lots of imformation aswell!!

@KleoYan

2 ай бұрын

Hi Leslie Peters, welcome to my channel and thank you for your feedback. All the best with your build too. 😉

You are amazing explain all in detail! Thank you very much! Very useful guide! ❤

@KleoYan

3 ай бұрын

Hi NAP Oficial, welcome to my channel and thank you for your valuable feedback. 😉

I love it, I bought two. Very Cool, DeepCool

@KleoYan

24 күн бұрын

Hi NEO DON, welcome to my channel and congrats on the purchased. This AIO is well build 🙂

Did yesterday night and it worked thanks

@KleoYan

2 ай бұрын

Hi Jose Dominguez, most welcome and thank you for the update 😉

How do i turn down the fan speed? mine are running al full speed. Way too loud

@KleoYan

Ай бұрын

Hi Jorge A, welcome back. The radiator fan is connected directly to your motherboard fan header, you will need to either go into your motherboard bios/uefi or to use your motherboard utility application control your radiator fan speed.

great review, as always from you. Only thing missing, is the noise level. I saw another review that the pump speed is fixed on this pump, which makes it sound like a mosquito. No one actually talks about noise with this AIO. You mentioned it briefly but a bit more info would be great. 🙂 Otherwise, perfect review.

@KleoYan

3 ай бұрын

Hi Daniel Voldby, welcome to my channel. I see what I can do at a later stage as I do intend to do a content that compares all the aios I have on hand. I am curious to know which AIO has a better performance over another. Maybe at that content, I will test the pump noise against each other. Thank you for your suggestion. 😉

@dalle5

3 ай бұрын

@@KleoYan thanks allot, that would be perfect. For now, I am personally choosing lian-li galahad lcd aio. Because the pump rpm on deepcool isn’t too good. But thanks again, looking forward to your next review

@KleoYan

3 ай бұрын

@@dalle5 hi, no problem at all, will follow up on this but will take sometime. thank you!

Help at minute 24:00, you show the spacers for the motherboard and heatsink. Can you help me with the measurements? I have the Mystique but don't have the Intel mounting. I would greatly appreciate it if you could send me a photo of the block brackets to take the measurements. Please help.

@KleoYan

6 күн бұрын

@@The93loco hi welcome to my channel, unfortunately, I game returned this unit to Tech Dynamic, so sorry.

another great video. Thanks for testing on both AMD and Intel platforms. how would this cooler compare, from a temperature and noise level, with the arctic LF3 360 non argb?

@KleoYan

3 ай бұрын

Hi Mr. T Cas , welcome back. this cooler will be slightly better compared to the LF3, unless you stop the LF3 VRM fans from operating. I notice the VRM fans on the LF3 starts to get louder, will need to do some clean up and old maintainence. If you compare just the pump, this is abit louder. btw about to reply you on the P14max on 280 LF3, the temperature drops between 5°C to 7°C compared to the P14 ARGB and 4°C to 6°C degrees on the P14 fans.

@user-dx5tu6yz7t

3 ай бұрын

@@KleoYan Thank you for the info Kleo. Glad to know you basically can't go wrong with either. As for the P14max fan, JUST WOW!! That's quite an improvement. And the price makes them a no brainer. Looking forward to that review.

@KleoYan

3 ай бұрын

@@user-dx5tu6yz7t ​​⁠ok dokie. Once I have the time I will do that 😉

How do you get the gif?..mine won’t find or read them on my pc

@KleoYan

2 күн бұрын

Hi Silbythegram, welcome to my channel. This liquid AIO does not allow you to import .gif, there are only present profile to be loaded on the application itself.

Hi, I have the AIO... However, it does not transfer any data to the Deepcool software. So neither fan nor CPU data. Do you have an IDEA?

@KleoYan

Ай бұрын

Hi NeverOnPic, welcome to my channel. Kindly look in your device manager, under Universal Seriall Bus Devices, see if you can see the mystique contoller detected. If it's not, you might what to check if your motherboard chipset driver is up to date. check your motherboard website under the download section. look for Chipset Drivers.

great video! kleo what psu are you use? see the idle was really good @12.1up and 12v under load. thank dude :)

@KleoYan

Ай бұрын

Hi wilson gautama, welcome to my channel. I am using the Montech Titan Gold 1000watts . It might not be branded but it's very rock stable, you can find more info here www.montechpc.com/en/products_detail.php?nid=330&s_ok2=

@wilsongautama1688

Ай бұрын

@@KleoYan thank a lot ^^

@KleoYan

Ай бұрын

@@wilsongautama1688 you are most welcome 😉.

Hello Kleo, on an unrelated topic, I've neem trying to find a video of you where you trim the wires on the P12 CO fans, it might have been as part of a O11D Mini build or something like that. I like the idea very much of trimming the wires to have a very clean daisy chain with no clutter. If it's not asking for too much is there any chance you'd remember which video it was? If not it's all good much appreciated anyway.

@KleoYan

3 ай бұрын

Hi Ben, welcome back, it's on one of my O11D Mini video, but let me have sometime, I see what I can do if you not in a hurry or you can send me an email godzylatech@gmail.com. I will help you out whenever I can. playlist of the O11D Mini kzread.info/head/PLEW-b-2vYDdOt8Zk6UFe1OlPEUOfQQ4AM&si=KDIQxvF5F0-VJDnu and the actual vid I have done to shorten the lenght of the fan cable is here kzread.info/dash/bejne/YqWHw7qYnbLQgcY.htmlsi=PhwtIGUGoxU7PVW3&t=32 (Timestamp 00:34), but it's fast forwarded.

@KleoYan

2 ай бұрын

Hi I found the normal speed of what I've done with fan crimping, you can find it here kzread.info/dash/bejne/aqCi29WdiJinj9I.htmlsi=PN5HY36D9z3c-FPG&t=506 timestamp at 08:25

@Ben-ld1qi

2 ай бұрын

@@KleoYan Apologies for the late reply, I had a very important project to finish this past week. So this is EXACTLY the video I was looking for! And I appreciate you taking your own time to find it, thank you very much. My friend now is thinking of taking a regular fan and adding a daisy chain cable to it, sounds more difficult than simply shortening the existing cable

@KleoYan

2 ай бұрын

@@Ben-ld1qi hi and welcome back. As for adding fans. The procedure to shorten the cable length of a fan is the same. But you will need cables and the right connectors.

Can it show gpu temps

@KleoYan

2 ай бұрын

Hi Against all 4ags and trans, welcome to my channel. nope not able to.. maybe next upgrade of the application.

I've ran into an issue where media does not want to display at all. That's with updated Windows, chipsets, software and everything... It's frustrating because it's only a few months old. It just displays white boxes that sometimes say "no image," the GIF and PNGs do not work, only monitoring.

@KleoYan

2 ай бұрын

hello Curse, try this. uninstall the application. make use of revo uninstaller. ( www.revouninstaller.com/ ). Revo uninstaller will remove all unwanted files / folder / registry in your system. Illustration to use revo uninstaller kzread.info/dash/bejne/p4Gbt7uikc7WqLA.html . then turn off your PC. unplug the USB Connector from the usb port on your motherboard which is connected to the aio pump block. switch off your PSU, unplug the AC plug and press the PC power button a couple of times to discharge the current that is holding on your motherboard. wait for 45 seconds. plug back the USB connector, the AC plug to your PSU, turn on your PSU and power up your PC. reinstall the mystique app.

@AbsolutelyCursed

2 ай бұрын

@@KleoYan Appreciate the time you took to reply but unfortunately this did not work. I tried it a couple times. Even waited up to a couple minutes. Switched ports on MB too. I’m lost at this point. May have to return it and grab a different one but I truly like this one. Very efficient as well.

@KleoYan

2 ай бұрын

@@AbsolutelyCursed have you tried a different usb port? or do you have space M.2 or SSD and to install fresh windows and try it out again?

@AbsolutelyCursed

2 ай бұрын

@@KleoYan I did try a different USB port. No change, last effort would be a new windows install.

@KleoYan

2 ай бұрын

@@AbsolutelyCursed yup.. try on a spare drive, if it reacts the same, that means is your AIO issue. if it's not, then you might have to spend sometime do redo your main M.2 or SSD.

Can you please measure how many decibels pump have ? I got mine and tested with all wents off in case - only pump noise and I got like around 46-50db via app in phone - when I put mobile in front of display. And deepcool is mentioning that pump is super quiet only 21db - Just wondering for comparison with same measurement approach. As I did not expected more noisy pump in general.

@KleoYan

2 ай бұрын

Hi RickBrick, welcome to my channel. I had a test this this morning around 3am which is quiet and when I place the pump near my digital noise meter, about 3cm, the noise level is at 36dBa to 38dBa. If I am away from it about 2ft (open bench without a case) is about 22dBa to 23dBa. I am using a noise meter for this test.

@KleoYan

2 ай бұрын

I forget to mention. Is only with the pump on without the fans.

@rickbrick6689

2 ай бұрын

@@KleoYan Thanks for checking. I got mine without fans about 48db in average- only pump. The noise in the room is 35 db. But I measured via app on phone - but still seems to be quite loud. Maybe I was not lucky with good pump :) . Maybe I will have a look for a replacement.

@KleoYan

2 ай бұрын

@@rickbrick6689 i suggest you do. Once you gotten the replacement. Test it out first before you mount. Mine is just dead quiet.

👋 I want your advice should I get Amd cpu or intel this year when they new release? What is best cooler buy this or better wait?

@KleoYan

Ай бұрын

Hi Yoo Anto, welcome to my channel. I can't tell you with newer generation platform to get as I have no clue how both perform. I will strongly advise you to wait for them to be release and to be tested by reviewers, check out on reddit forums on issues and such.. I can only recommend you via my style. 1st wait 2nd check for issues on the go 3rd do not hurry to purchase anything yet. this will be about 4 to 6months before I decide to get newer processor. As for AIO, if you have eyes on AMD, then this will apply kzread.info/dash/bejne/lZVm3KmMgdm9n8o.htmlsi=zajZcDZmEwvPlG8d not all AIOs just 8 which I have tested. As for Intel, the new generation is having a new socket, so I can't recommend anything. Once again thank you for asking, best is to wait.

@yooanto9465

Ай бұрын

@KleoYan yes I like waiting on new technology. I'm learning more to AMD cpu because E cores cause a lot of trouble. I test it this myself on 2 cpu. I read 7900x3d will remain top performer over new gen.

@KleoYan

Ай бұрын

@@yooanto9465 Hi and if that's the case. This liquid cooler will do just fine, as you can see the results I've tested over here kzread.info/dash/bejne/lZVm3KmMgdm9n8o.htmlsi=AQVFtoAHFKhmlNAd.

@yooanto9465

Ай бұрын

@KleoYan I will order one with 7900x3d but don't know what mobo to get?

@KleoYan

Ай бұрын

@@yooanto9465 hi welcome back. that's good. As for motherboard, it greatly depends on what are your needs. Do you need lots of nvme m.2? If not can just got for B650 boards.. I have been using this MSI Mortar B650M board (m-ATX) in most of my benchmark test of my content. Its a very good board.

Thanks! Great tutorial. Bummer this cant read any GPU data like the kraken.

@KleoYan

Ай бұрын

HI Kenny Bobby, welcome to my channel and yup. It's a bummer, I have feedback to deepcool, hopefully they can do an upgrade on their software to show GPU Temp. Once again thank you for your feedback 👍👍👍

@kennybobby201

Ай бұрын

@@KleoYan this product is gonna be a hit and they prob know it by now so im sure they will fix all the software issues and add features. Thats all it needs to kill the kraken. If im deepcool im puttin all available resources into gettin it right before the next AMD CPU release next month.

@KleoYan

Ай бұрын

@@kennybobby201 Yup you have a very good point there. As mentioned this will be highlighted to them and lets hope it will come true 😉

Great Video as always, just my thoughts so much nicer than ian Li.

@KleoYan

3 ай бұрын

Hi P L, welcome back and thank you for the feedback. Indeed it does look better compared to the Lian Li Galahad II LCD and it’s much cheaper, but I do like the customisation on the Lian Li LCD app.

hi, and great review! i was wondering where did you find the software for the Mystique 360? going to Deepcool's website there is no software for this to download that i can find. do you have a link ? Thanks

@KleoYan

2 ай бұрын

Hi Sarrion, welcome to my channel. here you go. repo-sg.deepcool.com/DeepCool-1.1.13-setup.exe

@robertsarvisjr452

2 ай бұрын

@@KleoYan great! thanks again!

@KleoYan

2 ай бұрын

@@robertsarvisjr452 you are most welcome and all the best with your build too.

@THY425

2 ай бұрын

@@KleoYan cant be download. time out error

@KleoYan

2 ай бұрын

@@THY425 hi welcome to my channel. I am having the same issue as you. maybe try that later. thank you!

Too bad I didn't see this cooler five months ago. I bought an nzxt kraken with an LCD display. I like it and it works well but I paid extra for rgb fans I don't use and the display is round. I moved to it from a Deep Cool Castle 360 RGB. That is an excellent cooler. I would have liked another Deep Cool cooler but I couldn't find one at the time with an lcd display. This cooler would have been perfect with the square display. However I am seeing some reviews saying the display is a little restrictive but if it displays animated GIFs it's perfect for my needs. I am almost tempted to sell the nzxt and pick this up just for the square display. I do wish AIO manufactures would make their displays work with Aida64. I also wish manufactures would sell AIOs without any fans. I always resent paying for fans I will likely not use. If you want your PC to look good you need all the same type of fan so they match. Fans that come with AIOs always end up staying in the box. Sell the fans separately and offer a version of the AIO without fans. Good review.

@KleoYan

3 ай бұрын

Hi Mergatroid Mania, welcome to my channel. your feedback is well recieved. I will forward your feedback to the various brands whom I am in contact with. Lets see if they can sell AIOs without the fans. Thank you!

Can anyone tell me why the software won’t download it says connection lost

@KleoYan

2 ай бұрын

Hi Jose Dominguez , welcome to my channel. You might want to try later as I do get the same issue.

@KleoYan

2 ай бұрын

you can try now. it's fixed

are you having an issue? many people complaining about their lcd and pump

@KleoYan

2 ай бұрын

Hi Ekzikel, welcome to my channel. Nope, as currently am running on my test bench till the return date of this unit. For the LCD issues which some have approach me. That was due to not updating their motherboard chipset driver as for the pump, I havent had any issues with it yet.

@ExequielPolicarpio

2 ай бұрын

@@KleoYan okay thanks, im waiting for my mystique ill let you know if there is something wrong

@KleoYan

2 ай бұрын

@@ExequielPolicarpio Ok, but lets hope nothing goes wrong 😉 but if it does, contect deepcool.

@ExequielPolicarpio

2 ай бұрын

@@KleoYan got mine today bro.. its all goods no issue working fine

@KleoYan

2 ай бұрын

@@ExequielPolicarpio ​​⁠thank you for the update and that’s great to hear 😉

waiting for the white version !

@KleoYan

2 ай бұрын

Hi StyLixz, welcome to my channel. I believe, they have taken into consideration. 😉

@stylixz3976

2 ай бұрын

@@KleoYan they will release the white ver. eventually, but it will takes time..

@KleoYan

2 ай бұрын

@@stylixz3976 yup and as mentioned, they have take into consideration 😉

Way better and cheaper than NZXT Kraken Elite Lineups

@KleoYan

3 ай бұрын

Hi MicerGlancer, welcome to my channel. Yup, that's the key for this company, they are targetting to budget audience and yet their products keeps improving. This unit looks very simple and elegant when it's inside the case.

@maxsunz3703

3 ай бұрын

Nzxt OEM asetek and deepcool no OEM asetek, is way this cooler is cheap than nzxt, Asus and Lian Li

@KleoYan

3 ай бұрын

@@maxsunz3703 Hi welcome to my channel and thank you for your feedback.

AVOID. The screen of my Mystique 360 failed the day I installed it. It was no longer recognized as a USB device by Windows Device Manager. If you search the web, you'll see I'm not the only one complaining about this issue.

@maxsunz3703

3 ай бұрын

Yes more same issue black screen after instal software deepcool, i think if u want buy deepcool lcd waiting v2

@KleoYan

3 ай бұрын

Hi Peter Hewett, welcome to my channel, so sorry to hear this from you. Sometimes is not the device that is causing this issue. It could be the motherboardchipset drivers are not updated on the OS. I do conduct other content that make use of the universal serial bus which I don't run into problems, but there are a handful of pc builders out there having similar issues, LCD not displaying, system not detect and such. Some I am able to resolve for them, all is needed is just to update the motherboard chipset drivers.

@KleoYan

3 ай бұрын

@@maxsunz3703 welcome to my channel. If you do have this unit and run into this issue. You might want to check if your motherboard chipset driver is uptodate.

@TontNZ

3 ай бұрын

@@maxsunz3703I didn't know when the screen stopped working, but I can confirm that I installed the Deepcool software (and severely bloated is an understatement). If this is absolutely the case, it looks like the software is f*cking the Mystiques USB controller. At first I thought it could be a driver problem, so since I was building a new PC, I reinstalled Windows 11. Then realised that the screen should have at least displayed something during the power up/boot sequence. I can confirm that when I installed the Mystique the screen was working. After it failed, it didn't work on either of the mobo USB headers. It still didn't work after a second complete blank SSD Windows 11 reinstall, so I think you can discount chipset drivers.

@maxsunz3703

3 ай бұрын

@@TontNZ i think waiting fix bug software deepcool

Planning to buy this for my 2nd PC. But too many complaints about this AIO. From screen not working, Pump too loud. Hmmm well see ill wait for a bit.

@KleoYan

3 ай бұрын

Hi Bruce lee, welcome to my channel. I do get feedback on this and am checking with Deepcool with cases like AIO pump is too loud. I have use this sample unit for almost a week. I don't find it noisy. I guess it depends greatly on individual hearing. By the way there is an update on the application when I was using it.