Tommy could you do another part to this series regarding the current Nvidia panel settings as there are new things within it that wasn’t there on your video years ago. Currently have my panel set at let 3D application decide but didn’t know if there were better options available.

@backmarkerbob

25 күн бұрын

I was going to ask something similar, how these new videos relate to the past nVidia settings videos

Unbelievable the amount of effort from him. Thanks! Never seen a settings video so detailed

Amazing work! Thank you for this massive contribution to the community!

Good to see you again Tommy. Thanks for the information.

It's so interesting to see that your settings are aligning close to what I've been finding with Pimax settings and 7950x and 4090. One thing I noticed which is good to do is particles High and full res and soft off, this prevents stutter at start of road race. Grandstands I typically have off as they save massive fps at tracks like Daytona and LeMans with a full grid.

Sorry to hear about your Dad. 👍 Sending positive vibes to you and Family! 🙏

thanks for putting in this work for the rest of us!

I’ve noticed similar things as you. It seems the harder you make the gpu work the better. I’ve also noticed that your speed seems to affect fps. Sometimes I see my fps increase as my speed on track increases. I have a 12600k and an rx 6900xt. Triple 2k 1ms monitors. I get 144fps very easy with pretty much your same settings. I do go lower at race start but still over 100fps. wanted people to know you don’t need a 4090 to run triples…. Another note. Setting your fps cap a few numbers lower than your monitor really helps a lot. My graphics are way smoother with cap set to 142 instead of 144

24:50 - 1 pass of cube maps gives actual world reflections on the cars (try driving under a bridge) instead of generic ones, more don't do anything though.

This is only in replay settings. It doesnt work the same in the gameplay setting.

Great video and research. However, I notice you’re doing most of these settings in the “replay” menu and not the actual graphics menu. Does this mean you have been doing all your benchmarking and testing using the Replays and not actual driving after making changes in the Graphics menu?

@hunterh1033

Ай бұрын

Imagine.. lmao

Thanks Tommy. I run a 4090 myself with triple 4k 144. I was struggling getting over 80fps. Just with your first video I've gotten over 100fps. Looking forward to trying these out tonight.

why r u in the replay tab and not graphics?

I have been struggling with my 4070 Ti Super. I was PRAYING you'd post an updated video of this. Can I ask why you show us the settings in Replay instead of the Graphics tab? Do you offer help with getting folks setups right?

Are you able to advise what we can do with the rain. I've dialled everything in and can max out my monitors refresh rate of 144, but as soon as rain is added to the mix I drop back down to to 60 to 80 fps range. Not using SSAO or SSR at all. Just trying to find a happy medium with settings. Thanks for your hard work In putting this together.

I was intrigued by your results, but on a "average" setup, 5600x3D, 32gb, nvme ssd, 4060 8gb, all of these settings that make your setup "faster" tank my FPS anywhere from 5-20fps. (and that is while having detail on most things much lower than your setup) For me using FSR ultra has allowed me to turn on more settings and get an overall better image while still being smooth, I only target 90fps, and I can only get that in the dry, rain is giving me about 10fps hit on average, but still very playable. I have used a setup recently that was a i9/4090 at a friends and he had almost everything maxed out, it was having no problem getting over 200fps most of the time, (we're both using triple 1440p) but to my surprise the "experience" of it really wasn't any better, sure if you screenshot a frame and zoom in, I'm sure it looks better, but that's not what I care about when racing.

@MTBGarage

Ай бұрын

I did want to add, thanks for the compression settings, I had not heard of those and I always wondered why my custom paint I made looked like crap in replays, changed that and now it looks great!

@R4J021

Ай бұрын

Have you tried just running the graphic config and using those settings. My system runs way better on the config than trying to adjust it. HOWEVER I did turn dynamic objects off that's the only change. Everything else is on and maxxed. Tge game looks amazing and fps is better than what I was achieving turning this off, that off etc. Give it a try.

@MTBGarage

Ай бұрын

@@R4J021 there's no magic in the graphics config, generally they just reset things you already disabled. I use IR sidekick, to keep profiles and make easy changes.

Hi Tommy. Awesome videos! Do you have any recommendations for how to do the same comparison tests with our own systems? What is your method in doing testing with CapFrameX? Is there a straightforward way to setup that application for iRacing testing? I would like to try and replicate what you have done here with my meager PC. 🤣 Thanks! 🏁

yours videos the best help a loot.... now after uppdate iracing nvidia filters not work any more.... there its reshade but video settings i find its 3 years old.... can you give info whit it.....

5:46 I have to wonder if Heat Haze and Distortion makes more of a difference with a lesser video card. Your card has a LOT of memory. But on my laptop 4070 or another card with less memory it could have a different impact.

Good to see you update us all on all this stuff. im sure you know, but you can adjust the "SharpeningAmount" in the ini file also. And since you suggest having it on, i was just wondering if you had benched that with different amounts? I had once messed with the settings and found jacking it up made it look much better with very little impact to frame rates. Also, FXAA has an overkill settings int he ini file.

@71datsun1

Ай бұрын

Sharpening Clamp & Percentage. When you lower the Clamp you can increase Percentage and vice versa. Clamp is the distance that it's trying to sharpen everything within that distance. At a road course with long straights, objects in distance will be fuzzy until you get closer. At a small short oval, everything within the track may be within that distance. Default Clamp is 10 wt Percentage at 125%. Large tracks I lower the Clamp at 2 and increase Percentage to 250%. Short tracks I may use Clamp @15 & Percentage at 100. This setting makes big difference in VR. Using iRacing Config is a must. Allows you to make unlimited copies of app.ini files, name them and install them. I have files named VR Short Track Night, VR Short Track Day, VR Road Night, Monitor Road Night etc etc. Its a free program. Just Google it. When you open it, your .ini will be named Current. Just copy it, make changes, save and name, install it. Name 1st copy something like Backup so you can always reload your original if you get lost making changes. There are also lots of FPS available in graphics in .ini for number of cars and pits rendered ahead and in mirrors

quick question ive followed along your viideo however I've noticed you keep going to replay settings, and not standard graphic settings, replay mode hasalways been lighter to run than driving.. o my question is are your settings the same for driving? and with me having a 4080gpu and and ryzon 9 3950x would it be advisable for me to copy your settings when I also use same PC for streaming

I would be interested to know if your gpu usage was very low on some of those tests. Some of the performance drop with lower settings could be due to the nvidia driver overhead. In some testing I did recently I noticed if the gpu (rtx4080) usage was below 30ish % frame rates would be lower/less consistent. Not sure where that actually starts to negatively fps though.

Edit to my previous comment. I listened when Tommy said his system likes to be pushed to the limit. I run the graphics config and just hit drive. The FPS difference between the config recommendations and any adjustments is actually so small. Sure dynamic objects and shadow maps made a difference but everything else i say leave it as per the config and enjoy the beauty of the game. I was chasing a dew extra fos but the game seems to do this perfectly for us. And maybe its just as tommy said, the system loves being pushed to perform better.

Interesting. Have you monitored CPU and GPU usage in these tests? I wonder how much those usages are affected by these settings. This COULD make a difference for some people, especially if they are trying to stream while playing.... some of these settings could create a little more headroom for multitasking?

Any advice on the fps drop in vr would be appreciated. Will be runnin g 90 fps and all of a sudden it's down around 10-15 fps. And it won't recover. Except backing out and going back in. Which sucks in officials

What settings are altered by running the "Run Graphics Config" function in the iRacing Options & Settings? Does this undo all the things you changed in these two videos?

I came to your two videos about this topic since i getting mad with iRacing lately. I have a pretty strong PC, RTX 4080; everything worked great until some 5-6 weeks ago. All of a sudden and randomly, im having issues where, despite having strong FPS in the game, around 200+, im having some kind of background lag. Im not sure if im describing it well, but for example this week im driving at Watkins Glenn in Super Formula and each time I approach turn 5, you are in the turn, rotating car, the car is looking great, and quality, movement, fps, but the trees behind you see in you peripheral view are just lagging. I tried everything, going very low and very high with the settings and installing new drivers, and nothing helped. It is very random, I will have the same issue now, and later, it will work great. I just can not find any pattern or any settings I could turn off or on. It really drives me crazy.

Can we get official confirmation that you tested these in actual game and not only replay??

The major major thing that bothers me is that the sponsors look blurry as heck on the further cars. It’s just so annoying to me in VR. It’s like not having your glasses on, but just for distant cars like 3 cars away.

Tommy, what CPU and GPU are you running?

@MTBGarage

Ай бұрын

it's listed on every screen of the captures i9 13k & 4090

@bradwrenn2508

Ай бұрын

Thanks. Watching on my phone and could not see what the text said.

How about foliage? you said nothing about it

Wizard.

Great video, but please repeating yourself. Say it once at the start amd once at the end 😮

Put a 4070 in and retest. Your not in the same realm as us average users

@samwats

Ай бұрын

Yeah that' my problem with these videos. "Here's my benchmark on my super high end system and what worked for me" isn't actually comparable or helpful to 90% of people who don't have that kind of hardware.

@allyhaze8300

Ай бұрын

So why are you watchin

@Daz555Daz

Ай бұрын

4070 is far from average as well though.

Lmfao.

Irrelevant to the majority of the audience. Very different on reasonably weaker hardware.