I bought the X20 WiFi 6 3 pack this last week. I never got the blue flashing light from out of the box. Got it working eventually by using a pin to press the reset button and finally I was able to follow the steps as demonstrated excellently in this video. Please bear this in mind and hoping my experience will stop you from wasting your time going round in circles and turning the air blue in frustration. Many thanks for your help.

Mine arrived today. Very helpful. Much better than the company’s video. Thank you.

@TechYourLife1

2 жыл бұрын

Thanks!

“Nice and round…” 😂

Can this be used separately? Like give one to my brother and I use the other 2

hi the internet cable that i disconnected from the modem during set up, do i need to plug that back in? In the instructions it says 'disconnect your old router from the modem before moving on', I'm guessing that's the cable? Well that was the only one that was connected to my modem. i don't have a home phone. thanks

Great video! I have a crappy gateway modem/router combo from my isp (hence my wanting to get a mesh router). One question: do i have to shut off the radio on the gateway? or doesn't that matter? Thanks

question: do i need two of these for it to work in another room?

HI, great video. Can You help me?. If I connected 2 Pc to RJ45 Ports of the DECO X20, at what speed can I work (can I selected the 5 Gb band to connected a fast speed?)

How do you connect your second one to the first? Is it wifi connection or wired connection

Excellent video! The only part that you might touch on a little bit more is when you have a modem router a as in combination. These can be used because some internet providers will not allow you to use other modems with their systems. So you can put the router into bridge mode. Now correct me if I'm wrong. I'd love to hear more on your thoughts about that! I think you did a wonderful job I would recommend your video! Keep up the great work but watch hanging out around Brian he may corrupt you. LOL

@TechYourLife1

3 жыл бұрын

AYL_Alan: Thank you Beryl. Good point on different Internet Service Providers - may not allow you to use devices outside than what they provide. I'll look into the Bridge option....

@berylwhite2983

3 жыл бұрын

@@TechYourLife1 thanks

@enixine1266

Жыл бұрын

@@berylwhite2983 would putting my current gateway into bridge mode solve this problem? Did you ever figure it out? Currently only getting 200mbps on a 900mbps connection. Wondering If this might help me because when I get close to my router my speeds shoot up but I can't move my gateway.

does this product work good my router is in my basement of my house will this make my wi-fi better up stairs on the main floor house is 3600 sq ft thanks

If you have 2G & 5G, will it let you set up both?

I just got the Tp-link deco x60 and just got the arris s33 modem and omg this system fix all my wifi issues. I love the app

@TechYourLife1

3 жыл бұрын

Yessssssssssssssssss

I am having a hard time connecting my 3rd deco, it stays yellow

Great easy video,I noticed this was two years ago.is it still great for 2023 ,or was it replaced by A later version? Thanks

@TechYourLife1

11 ай бұрын

They have newer systems that are definitely improved in terms of speed and features. WiFi 6, 6E, and even 7 now

Did you put your modem to bridge mode? I noticed you use a modem similar to mine that can do both router/modem.

@TechYourLife1

2 жыл бұрын

My modem isn't both so I didn't need to. It's just a fiber converter really. If you have a combo it's best to put in bridge mode

I have a dead satellite unit. It died very shortly after setting it up. I’ve tried resetting it but no luck. Dead.

Do you have to leave one deco unit connected to your modem or can you relocate it after setup. ie. Modem on first floor, one deco unit on second, and the other deco unit on 3rd?

@christophermarcelino3577

2 жыл бұрын

Did you ever find out??

@domimido5350

Жыл бұрын

You can

@duanelinstrom4292

7 ай бұрын

@@domimido5350, you can what?

Well it isn’t that easy to me. Still cant set it up now. Chose pppoe and keyed in the username and pw but deco will just turn red.

Great video, Alan. But it's all about the speed test. Very curious to see the difference between the Deco devices and the Google Wifi you had before. I'm updating my Google Wifi 1st gen router to the 2nd gen today and will see how much better that will be. Not expecting better speeds but, like you, I am getting maxed out with devices so this should help.

@TechYourLife1

3 жыл бұрын

AYL_Alan: so far the speed is awesome. I'll talk more about speed in another piece of content our site automatelife.net very soon! I think you should see some significant improvement in your WiFi switch!

@TechYourLife1

3 жыл бұрын

AYL_Alan: Hey Leo, here is the internet speed screenshot I got when installed the Deco X20: automatelife.net/my-speedtest-results-with-deco-x20-wifi-mesh-system/

@leogodreau9505

3 жыл бұрын

@@TechYourLife1 whoa!! Not too shabby!

@TechYourLife1

3 жыл бұрын

@@leogodreau9505 Yup, and that's with a router and point; no third device (point).

@leogodreau9505

3 жыл бұрын

@@TechYourLife1 I'm impressed. I don't get 400 in my small house. 4 points all wired in. Not complaining but that's better

I just bought this modem router and I have separate wifi extender. I could find any wps button in this router do you have any idea how can I connect my wifi extender?

@TechYourLife1

2 жыл бұрын

Extenders are pretty terrible in general. Less secure, less bandwidth. I would suggest you just go get another of these mesh boxes.

Do you have to leave the Ethernet cable inside the x20 for it to be connect to your original modem? Or can you take it out once connected

@below-skiv2197

Жыл бұрын

that's what i'm wondering too, leave a comment back if you got it figured out

@jlvetor123

Жыл бұрын

I’m not sure but I’d think you would lose internet once you remove the wire from the modem.

@below-skiv2197

Жыл бұрын

@@jlvetor123 ya i figured this out myself and just bought the rest of the set and they work perfect. But thank you for the response anyways.

Do i need a lan cable to connect it to the modem? Or i can use it wirelessly?

@TechYourLife1

Ай бұрын

Yes you need a cable

Good video but as many others you didn’t answer a question I have. In the app when doing set up it ask which you have X20-23 and a couple others. I have the 1800 but not sure which to click on. I had trouble with my install and wonder if I picked the wrong one, X20-23. I’m starting new install.

@TechYourLife1

Жыл бұрын

Sorry Jimmie, I was working with another gentleman and he had these. I can't give you any insight

If we buy only one , will this be worth it

@edisonyu5500

10 ай бұрын

I have only 1pc deco it boosted speed from 20mbps to 70mbps

If I have the AX10 from to link, can I just get one unit and connect if wirelessly? Or I must buy 2 units and connect one to the router?

@TechYourLife1

3 жыл бұрын

The AX-10 from TP-Link is a router. It's not part of a mesh system unfortunately. However, if you're asking if you can bridge them in the wireless settings of th AX10: www.tp-link.com/ca/support/faq/74/. The idea with the AX10 is that one router with 4 attennas is supposed to be enough to reach most of your living space. You should be good with one AX10. But the AX10 is not meant to connect with the DecoX20 as part of a mesh system (where the system figures out where the WiFi is supposed to go). Deco's are supposed to be able to mesh with other Deco devices from what I saw at CES 2021.

@jendaymate6183

3 жыл бұрын

@@TechYourLife1 thank you very music, I appreciate it!

@TechYourLife1

3 жыл бұрын

@@jendaymate6183 you're soo welcome

Will it work with spectrum?

Good video! Need to practice a bit more to where you dont sound and look like you are reading a script.

Do not work with IOS 17, avoid this product

@TechYourLife1

9 ай бұрын

I assume it will very soon. That would be odd for TP Link to drop support