Also check WiFi Duck DIY kzread.info/dash/bejne/i2mX0dKLZcfUYJs.html

@HUNTERJUSTFISHING

Ай бұрын

Help where can i find the preference link? Please help

@Roelox

4 күн бұрын

@@HUNTERJUSTFISHING Sorry, I am only just reading this now. It is in the description of the video.

Dude, I never comment videos, but you're a f4ck1ng legend, I searched all over the internet for a solution to the problem, my buttons weren't working, and only your video helped, thank you so much.

This helped me with that button issue bro thank you so much for this, I was compiling it for the normal esp8266 board library, With the Deauther board manager it was done along with the define button commands.

Thank you for such a clear explanation. It helped me a lot to develop my first project without so much frustration!

@Roelox

11 ай бұрын

No problem man :)

Out of all tutorials, yours worked for me. Thank you!!!!!

@Roelox

8 ай бұрын

Good to hear! No problem :)

You are my hero, I couldn’t figure out why the buttons weren’t working for 2 weeks.

@Roelox

8 ай бұрын

Thank you!

this has helped me so much!! thanks dude

Perfect video bro. Working for me and its total good. Thx man

@Roelox

Жыл бұрын

Thnx!

Who would've know that you need to visit website to turn Display on, thank you for showing this!

@Roelox

7 ай бұрын

No problem :)

Awesome broo , i have the button problem in this , u solve the problem thanks a lot

@Roelox

Ай бұрын

No problem :)

Thank you very much This video is the most credible I've seen today

@Roelox

5 ай бұрын

Thank you :)

Great 👍 worked for me perfectly

@hareeshd5206

Жыл бұрын

Hi dude one help

Thank you so much it finally works

@Roelox

26 күн бұрын

No problem :)

Thanks it worked for me

@Roelox

Жыл бұрын

Nicee!

Working successfully ❤

@Roelox

7 ай бұрын

Good to hear!

Good work bro, Its worked perfectly 😍 Can we increase the attack time

@almazcarpets

Жыл бұрын

Yes u can on web interface change time out value or set to 0

perfect very good

Bro deserves more

@Roelox

11 ай бұрын

Thnx!

What display are you using SH1106 or SSD1306 ? I´m using a Wemos D1 mini pro and display didnt work but the APP yes

@Roelox

Жыл бұрын

SSD1306

Hi, just a questions regarding to switches: the up, down and select. Are all of the switches are either closed or open contact? Thank you.

@Roelox

5 ай бұрын

Normally open contact

Nice video. Are you working with the esp8266 or esp32? If its not the esp32, can I do this project with esp32?

@Roelox

Жыл бұрын

Thnx, I am working with an esp8266 and I don't think you can do this project with an esp32.

@guillermosg7950

Жыл бұрын

@@Roelox thanks bro, do you hace a discord Channel/Instagram or whatever? I would like to follow you

@Roelox

Жыл бұрын

I only have a private instagram, sorry man

@crissgill6505

Жыл бұрын

Can i use esp8266 ch340G to upload this same code❓

thank you thank you soooooooooomuch bro 👋👋👋👋

@Roelox

26 күн бұрын

No problem! :)

Hey do you know if an oled display which uses SPI interface is also connectable via default mosi and sck pins and maybe with additional pin decelerations ?

@Roelox

5 ай бұрын

I would have no idea, sorry. Maybe this can help you deauther.com/docs/diy/display-setup

Are the pins the same for the esp 8266 with pre attached display?

@Roelox

2 жыл бұрын

I would have no idea sorry

@HTWwpzIuqaObMt

2 жыл бұрын

@@Roelox i think it will work since the only attachments left are the buttons

No me aparece la libreria deauther, como resuelvo

hello, a question in the last part after giving "reboot" the oled screen does not turn on, and I already checked all the connections and they are fine as well as the screen. Do you know what could be the problem?

@neftalicabanas9085

11 ай бұрын

Do you have a page where I can contact you privately?

@Roelox

11 ай бұрын

U can contact me on discord, my name on there is roelox

@neftalicabanas9085

11 ай бұрын

@@Roelox OK, thanks a lot

One Question, so If I want to use it how do I power it? Do I need to have it connected to my pc/laptop for it to be powered and work? or could I just use like a 3.3v battery after setup?

@Roelox

6 ай бұрын

You don't need to connect it to your laptop or pc. U could for example use a 3.3 battery yes. It just needs power in order to work.

how to reduce the delay on the intro or the beginning when it is turned on?

@Roelox

11 ай бұрын

I have no idea.. Sorry man.

My nodemcu a bit bigger it covers exactly 10 pins leaving no space for wires

Roel, wrm Ben je zo slim 😎

@Roelox

Жыл бұрын

Luuk, hoezo kill je mij? 🥲

Hi bro great video! I have a little problem, I followed the process but when I turn on the oled screen, the writings are all choppy and not distinguishable. the displays work i have verified. Do you know what the problem could be related to? thanks in advance! take care

@Roelox

11 ай бұрын

Hey man, thank you! Do you maybe have discord, that would be easier to check this problem. My discord is roelox

good video, I'm just starting in the world of arduino, but what do you do at minute 4:27??

@Roelox

11 ай бұрын

Hey man, I am pressing CTRL + F on my keyboard.

@neftalicabanas9085

11 ай бұрын

@@Roelox Thank you very much bro, but I have another question, I did the whole procedure and made the connections with the oled screen.... GND(-), VCC(+), SCL(D1), SDA(D2), but it doesn't give me an image Do you think I made my connections wrong or should I change the screen?

@Roelox

11 ай бұрын

SCL is D2 and SDA is D1. Did I put it wrong somewhere? Because more people made this mistake.

Hi sir, I did this and it worked! however, one question is how to add RGB led? what is the pin out and the code?

@Roelox

11 ай бұрын

U added me on discord right?

Im not able to get deauther in board types and also can i use 16x2 screen also not able to find any tutorial with any 16x2 screens

@Roelox

Ай бұрын

You can use the displays listed on this website: deauther.com/docs/diy/display-setup For the board problem. Did you add the link to the Boards manager urls in preferences?

bro help i made all project but buttons not working i change buttons type but still problem plssss solve

@Roelox

10 ай бұрын

Hey man, add me on discord and lets fix the problem :) My discord is roelox

Could you share the 3D printing project presented at the end of the video?

@Roelox

3 ай бұрын

Files: drive.google.com/drive/folders/1hOwY2rBeck8A_9g6uL0Vb677g8SvkBsG?usp=sharing NOTE: The hole in the case was too small for the usb cable to fit in, so I made this bigger after printing. The link is also in the description.

can i do the same project with an lcd screen? like the blue ones

@Roelox

Жыл бұрын

No, you will need an oled screen for this project.

Got mine connected and everything.. nothing pops up on the .96 inch screen. Any help?

@Roelox

2 жыл бұрын

Did you enable the display in the web interface?

@blackhat5076

Жыл бұрын

@@Roelox brw I have also this problem

@blackhat5076

Жыл бұрын

@@Roelox i enabled display interface also but not working

@Roelox

Жыл бұрын

​@@blackhat5076 Add my discord Roel#6931 so I can help u.

The oled keeps showing like a staticky screen and I can’t even see the original

Bro, make a tutorial on how to code with the Arduinodroid , because I don't have a laptop or computer

@Roelox

11 ай бұрын

My Samsung A51 Androids version is too old for ArduinoDroid :(

Yo everything works fine in bread board but how to make tht as a whole deauther which u made in final , just can u show me how do u made tht

@Roelox

7 ай бұрын

I have a link in the description with some pictures and the case stl files. Also pcb files if u want.

the deauth ,when I start deauthing it doesnt have response how to fix this

@Roelox

6 ай бұрын

Try to adjust some settings in the web interface

In my display I have the pin VCC GND SDA and SCL Connect everything as it says in the video and it doesn't work for me on the display

@Roelox

Жыл бұрын

Did you enable the screen in the web dashboard?

@MsLuis735

Жыл бұрын

@@Roelox Yes, I followed the steps as in the video

@Roelox

Жыл бұрын

Sorry for the late reply. Do you have discord, so I can help you further. My discord is Roel#6931

Question. How'd you solder the buttons to the case

@Roelox

Жыл бұрын

Glue!

@vehelix

Жыл бұрын

@@Roelox what I meant was, how did you connect a jumped cable to a button with 4 pins

@Roelox

Жыл бұрын

@@vehelix i don't really know how to explain but, 1 pin for the input (connected to the ESP8266) and 1 pin for the GND (I connected all the buttons GND wires to each other + display GND wire and connected 1 GND wire to the ESP8266)

its a bit of an old-ish video, but do you thinl you could tell me what oled screen exactly it was you used, seems perfect size

@Roelox

8 ай бұрын

0.96 inch I2C SSD1306 OLED display

@bluesquid2291

8 ай бұрын

@@Roeloxthanks, does the colour (blue or white) matter at all?

@Roelox

8 ай бұрын

​@@bluesquid2291no it doesn't matter

How can i remove this from my esp8266 if needed and make it like it was new???

@Roelox

9 ай бұрын

Iguess just flash an empty project

Sir the wifi connetion is not showing "pwned" network. can you help me?

@Roelox

2 ай бұрын

Sure, do you have discord? If you have, add me, my name on there is roelox.

i did all said in the video but with a wemos d1 mini, it keep saying an error in the arduino ide output page

@Roelox

Жыл бұрын

What is the error message?

@pacod7_kny451

Жыл бұрын

@@Roelox raise FatalError('Failed to connect to %s: %s' % (self.CHIP_NAME, last_error)) esptool.FatalError: Failed to connect to ESP8266: Timed out waiting for packet header

@pacod7_kny451

Жыл бұрын

@@Roelox can you help me fix it?

@Roelox

Жыл бұрын

I think you selected ESP8266 somewhere in the config or settings. If you are using a Wemos d1 mini, make sure your settings are set to the Wemos d1 mini and not the ESP8266

@Roelox

Жыл бұрын

If you have discord you can add me Roel#6931 And I can help you further.

Do you connect in 1 GND to all buttons?

@beaststreamer4832

9 ай бұрын

Yess

Hello my oled does not turn on, I think it is because it is the oled i2c model instead of sck , it has slc help me please, try everything and nothing

@GsRauL

2 жыл бұрын

oled is: vcc - gnd - scl - sda

@Roelox

2 жыл бұрын

Try to define DISPLAY_EXAMPLE_I2C in the A_config.h file. If you don't understand add me on Discord so i can explain it better. Roel#6931

Can you drop the stl for the case you made and demostarte how you made it please.

@Roelox

Жыл бұрын

I will try to find the file this evening.

@vehelix

Жыл бұрын

@@Roelox Thanks , i wanna learn how you soldered it and assembled if possible.

@Roelox

Жыл бұрын

Sorry man, I couldn't find it.. I do have a picture how it looks from the inside if you want.

@vehelix

Жыл бұрын

@@Roelox yes, that will help.

@Roelox

Жыл бұрын

drive.google.com/drive/folders/1hOwY2rBeck8A_9g6uL0Vb677g8SvkBsG?usp=sharing NOTE: The hole in the case was too small for the usb cable to fit in, so I made this bigger after printing. (Case and cover .stl file included^)

Do we need to connect to pc when use have to use it

@Roelox

7 ай бұрын

No you don't need to connect it to a pc, the deauther just needs power in order to work.

black screen seeing only blue dots at left side of display pleas healp

@Roelox

9 ай бұрын

Hey, add me on discord or join my discord server so I can help u. discord.gg/rvPvqVFrUc

If I wand use spi monitor Which headers should I connect?

@Roelox

6 ай бұрын

deauther.com/docs/diy/display-setup GND GND VCC/VDD VCC / 3.3V SCL/CLK/SCK GPIO 14 (D5) SDA/MOSI GPIO 13 (D7) RST/RES/RESET GPIO 5 (D1) DC GPIO 4 (D2) CS GPIO 15 (D8) or GND

@psa4350

6 ай бұрын

@@Roelox thanks a lot🙏

Yo, I can't get my buttons to work, I need to define them, how?

@Roelox

5 ай бұрын

Look at 4:25

Yo bro just wanna know wat oled display ur using here can you give the buying link

@Roelox

10 ай бұрын

I sadly don't have the buying link anymore but I used a SSD1306 I2C Oled Display

@lakshanZz-fq5zq

10 ай бұрын

Btw Thx for the display name bro

@Roelox

10 ай бұрын

No problem :)

I can't get it to work with a 1.3” oled display, it displays random dots around the screen, can you help me?

@Roelox

Күн бұрын

I will help u, add me on discord. My name is roelox.

@Kol_X

Күн бұрын

I solved this problem by changing “erase flash: sketch to sketch + wifi settings” and then flashing it again

Can you make a video with rechargeable esp

@Roelox

Жыл бұрын

With a battery? You can just use a powerbank haha

When i search "default" not found default word... What i do now? 4:29

@Roelox

9 ай бұрын

Are you searching in the A_config.h file?

Hey my esp8266 has and oled screen on itself will that work too?

@Roelox

7 ай бұрын

I am not sure about that, you will maybe need to modify the code to get the display working. But it shouldn't be that hard, just changing some pin numbers.

@xxac37xyt

6 ай бұрын

okay ill try then @@Roelox

@Roelox

6 ай бұрын

Goodluck!

and how do you turn this into a portable watch

@Roelox

Ай бұрын

Attach a small battery and some straps Iguess

@mrtn

Ай бұрын

@@Roelox where do you attach the battery?

Hey what app are you using for sheme making (its at 0:14)

@Roelox

Жыл бұрын

Hey, I used Tinkercad for the diagram, but I also just editted the ESP8266 and display in it. Because I couldn't find that in Tinkercad lol.

@ziolekanimations2312

Жыл бұрын

@@Roelox thanks and how do you power the bread board ( yes i know that you connect a USB to a ESP 8266 but how many V)

@Roelox

Жыл бұрын

I just used a standard USB cable, I think thats like 3.3 or 5 volt.

@ziolekanimations2312

Жыл бұрын

@@Roelox rhx

@ziolekanimations2312

Жыл бұрын

​@@Roeloxmy ESP 8266 board only flashes light 2 time please help

I used ESP8266 Lolin But display working Button are not working please help

@Roelox

Жыл бұрын

Did you wire everything correctly? Also add me on discord Roel#6931

@kalashnikov_47z

Жыл бұрын

@@Roelox I use apk version which direct installs deauther to board

@Roelox

Жыл бұрын

@@kalashnikov_47z Try the method I am doing in this video, maybe that will work.

@kalashnikov_47z

Жыл бұрын

@@Roelox I'm trying now If it success i will let you know 💪❤️👍

@Roelox

Жыл бұрын

@@kalashnikov_47z Goodluck!

I did everything like the video but the buttons don't respond. Does anyone know what can it be?

@Roelox

9 ай бұрын

Hey, did you define the buttons in the config file?

@Roelox

9 ай бұрын

Take a look at 4:25, u need to define the buttons. #define BUTTON_UP 14 #define BUTTON_DOWN 12 #define BUTTON_A 13

@LucasDroper

9 ай бұрын

@@Roelox thanks

Hi, my problem is, that there is no wifi like pwned what did i do wrong?

@Roelox

6 ай бұрын

Hey, maybe double check if the files are correctly flashed or maybe flash it again?

@marc187erz

6 ай бұрын

@@Roelox ok, I'll try it thank you very much for your fast reply

Working How to add resistors? Which pins to connect?

@Roelox

Жыл бұрын

I have no idea... Why do you want to add resistors?

@mizo_vaping

Жыл бұрын

@@Roelox I just make it working with nodemcu v3 (ch340) with 12x12mm push button, sh1106 i2c. Sometimes, it gets stuck on scanning.., or button not working, not showing display, each randomly occured. I dont know why, guessed the power is not enough.

@Roelox

Жыл бұрын

That could be the problem yes, but sadly you can't give more power with a resistor.

@Roel i cant conect to esp's wifi

@Roelox

2 жыл бұрын

Doesn't it show up? Or wrong password? Or What is the error (message)?

Can i use wemos d1 mini?

@Roelox

Жыл бұрын

You can use the LOLIN (WEMOS) D1 mini, but I don't know if there is any difference between a normal wemos d1 mini and the LOLIN one. deauther.com/docs/diy/supported-devices

Please tell me bro how to do this by mobile I don't have computer 😢

@Roelox

5 ай бұрын

I have never done it, but maybe this can help you: hackaday.io/project/183433-how-to-program-arduino-and-esp-using-mobile-device

I try it with no display and no buttons it working i control it on my phone

@CodesExplorer-hb1wr

2 жыл бұрын

@Ujjwal Hacker yes

Mr. Can modif deauth+ eviltwin+phising ?

@Roelox

11 ай бұрын

Should be possible, but I have no idea how.

Can I also use an esp32??

@Roelox

Ай бұрын

No, you can't use an esp32 for this project.

My oled doesnt turn on and cant even find the pwned wifi

@Roelox

10 ай бұрын

Add me on discord: roelox or join my discord server discord.gg/rvPvqVFrUc

yo bro can you help me i coded the program but oled screen is not working i dont know how to fix pls help asap i am subbed wifi is working and pwned is showing but oled not working pls help me

@DARKFF_pc

Жыл бұрын

and i am not using bread board but i did connections the same

@DARKFF_pc

Жыл бұрын

pls reply

@Roelox

Жыл бұрын

Do you have discord so I can help you better? My discord is Roel#6931

@Roelox

Жыл бұрын

Btw, did you enable the screen in the dashboard?

@DARKFF_pc

Жыл бұрын

@@Roelox i send freind request

My screen is upside down how to fix it!!

@Roelox

4 ай бұрын

Use #define FLIP_DIPLAY true (Yes its DIPLAY and not display)

My buttons don't work, can you help me?

@Roelox

5 ай бұрын

Did you define them? Also add me on discord name: roelox

Can we use esp32 instead for this project?

@Roelox

7 ай бұрын

No you can't use an esp32 for this project.

@prod_jay2132

7 ай бұрын

Is there a code available for esp32?

@Roelox

7 ай бұрын

the esp32 doesn't meet the requirements to perform a deauthentication attack.

I could not find the board (deauther esp8266 boards

@Roelox

Ай бұрын

Did you add the link in preferences?

@HUNTERJUSTFISHING

Ай бұрын

Ill try and let u know​@Roelox

@HUNTERJUSTFISHING

Ай бұрын

​@Roelox and where is the link?

@Roelox

Ай бұрын

​@@HUNTERJUSTFISHING In the description of this youtube video

@HUNTERJUSTFISHING

Ай бұрын

Ty​@@Roelox

How to add neopixel light?

@Roelox

4 ай бұрын

GND GND VCC VCC/3.3V DIN GPIO 9 (SD2) deauther.com/docs/diy/display-setup

@user-py4pw1ru7d

4 ай бұрын

@@Roelox bro the up down ok buttons is no working. I already connected to D5 D6 D7 please help

@Roelox

4 ай бұрын

Did you define them?

Bro i just want to ask for oled 7pin display, is it just the same step? Pls help thankss a lot 😇

@Roelox

10 ай бұрын

I think it will be diffrent, because in my video I am using a I2C display and a display with 7pins is a SPI display. I've actually never done it with a SPI display, but u could take a look at this: deauther.com/docs/diy/display-setup

@axelowgeneta226

10 ай бұрын

I already did this tutorial bro but the problem is it's always restarting, i did every step in the video, it happens every time i choose the SPI example in tools

@Roelox

10 ай бұрын

Yeah tbh, I also always had problems when I selected the SPI or I2C examples. add me on discord: roelox . We can try some diffrent things.

@axelowgeneta226

10 ай бұрын

Sure bro whats your dc

@Roelox

10 ай бұрын

​@@axelowgeneta226my discord username is: roelox

why my tft not working? is there any setting for tft size? btw i play gt hehe

@Roelox

Жыл бұрын

Huh, tft size?

@FLVINZ

Жыл бұрын

@@Roelox the OLED

@Roelox

Жыл бұрын

@@FLVINZ Did you enable your screen in the web dashboard?

Hey, how can i flip the display?

@Roelox

2 жыл бұрын

I think if you add "#define FLIP_DIPLAY true" under // ===== DISPLAY ====/ in the A_config.h file it should work.

@sabagloveli807

2 жыл бұрын

@@Roelox it’s already written, i changed it to false but nothing changed on the screen.

@Roelox

2 жыл бұрын

@@sabagloveli807 Okay maybe try to add "#define FLIP_DIPLAY true" under #elif defined(DEFAULT_ESP8266) || defined(NODEMCU) || defined(WEMOS_D1_MINI) || defined(DSTIKE_USB_DEAUTHER)....... If that doesn't work add me on discord Roel#6931

Bro my switches are not working 😢

@Roelox

10 ай бұрын

Add me on Discord or join the discord server so I can help u

Nothing popup on oled display

@Roelox

Жыл бұрын

Did you enable it in the web dashboard? Also add me on discord so I can help u better, my name on discord is roelox.

Up, Down and Ok switch is not working 😞 Please help me 😭

@Roelox

8 ай бұрын

Did you define the buttons?

@techy_thanos

8 ай бұрын

Yes D3 (GPIO 0) for Up D5 (GPIO14) for Down CLK (GPIO6) for Ok Am I right??? But still not working 😢 Is there any option to enable??

@Roelox

8 ай бұрын

If you followed my video u should define them like this: #define BUTTON_UP 14 #define BUTTON_DOWN 12 #define BUTTON_A 13

@techy_thanos

8 ай бұрын

​@@Roeloxthank you. I will inform you after testing 😊

Bro help me I had a Button issue plzzzzz help me 😞

@Roelox

Жыл бұрын

Sure, do you have discord? add my discord Roel#6931 so I can help u further.

Can i use esp8266 ch340G lolin to upload this same code ❓ because i cant found cp2102

@Roelox

Жыл бұрын

Yes I think the ESP8266 CH340G should also work.

@crissgill6505

Жыл бұрын

@@Roelox too fast to reply ❤️ thanks brother

@Roelox

Жыл бұрын

It is btw really easy to find the ESP8266 cp2102 on ali express^

@crissgill6505

Жыл бұрын

@@Roelox okay but i just brought from Amazon.... Ch340 ... Wrong one ....😅

@Roelox

Жыл бұрын

Ch340 does also work^

screen size?

@Roelox

Жыл бұрын

0.96 inch Oled

@Szprej0

Жыл бұрын

0,96?

@Szprej0

Жыл бұрын

@@Roelox thx

Which link is the code?

@Roelox

Ай бұрын

This is the link to the code: github.com/SpacehuhnTech/esp8266_deauther I have it in the description, but I think it needs to be verified or something.

my deauther buttons aren't working

@Roelox

Жыл бұрын

Did you define them?

@yesiamuchihasasage197

Жыл бұрын

@@Roelox i took a look in the aconfig file and it seems so

@Roelox

Жыл бұрын

Do you have discord so we can find out what the problem is? My discord is Roel#6931

@yesiamuchihasasage197

Жыл бұрын

@@Roelox yes mine is dead_user_zxczxczxczxc#2050

+rep

@Roelox

8 ай бұрын

Thnx!

hello

Pls reply me Roel mine is working fine but i want to request you smth that can you make a tutorial on how to make wifi nugget it is used to grab wifi password

@shikhadhall2317

Жыл бұрын

Pls make

@shikhadhall2317

Жыл бұрын

Same stuff required i cant find a tutorial on yt

@shikhadhall2317

Жыл бұрын

And 1 more question can this project be made with 1.3inch oled display? Instead of .96inch

@shikhadhall2317

Жыл бұрын

1.3 inch is iic

@Roelox

Жыл бұрын

Yes its possible to use a 1.3 inch screen, but you will need to change some things in the code. Take a look at this: deauther.com/docs/diy/display-setup

Those deuther are not working anymore since almost every modem now is 5ghz someone needs to step up the code and harware to keep up with the advance of wifi

@Roelox

Жыл бұрын

Yepp.. But u could always buy a wifi adapter with monitor mode and packet injection that supports 5GHZ and deauth with aireplay-ng.

@rodriguezfranco3839

Жыл бұрын

@@Roelox oh damn that would cool af , could you do a video explaining a bit more about it?

@Roelox

Жыл бұрын

My adapter only supports 2.4GHZ.. :(

Is this also for v3

@Roelox

8 күн бұрын

Yes it should be the same, but I haven't tested it yet.

@MikeeOkk

5 күн бұрын

​@@Roeloxi need help the display doesnt work i tried everything i tested the display with a simple display it works but not on the deauther

@Roelox

4 күн бұрын

@@MikeeOkk Double check that SCK is connected to D2 and SDA is connected to D1.

@MikeeOkk

4 күн бұрын

@@Roelox yes it is connected all the connections are fine im using a i2c ssd1306

@MikeeOkk

4 күн бұрын

@@Roelox my display is voc gnd scl sda

Display not working

@Roelox

Жыл бұрын

Did you enable it in the web dashboard? Also add my discord: roelox , so I can help u better.

@hareeshd5206

Жыл бұрын

@@Roelox actually sorry bro Sda scl connection i done Now it working fine

@hareeshd5206

Жыл бұрын

@@Roelox thanks for helping bro

my display is all fuzzy

@Roelox

Жыл бұрын

What type display do u have?

@JohnSmith-zc6sv

Жыл бұрын

@@Roelox the same one with same pins as in this video

@Roelox

Жыл бұрын

Double check the wires maybe? And did the display work before? Otherwise you can try a diffrent project to try if they display works. If you have more questions u can add my discord Roel#6931

@JohnSmith-zc6sv

Жыл бұрын

Sorry my bad, I realised the display is slightly different pin configuration. Mine has VDD, GND, SCK, SDA. I didn't even realise there is a difference

@Roelox

Жыл бұрын

Is it working rn?

Display is not working(

@Roelox

Ай бұрын

What kind of display are you using?

@DillemaFixer

Ай бұрын

jmdo 96d-1

@DillemaFixer

Ай бұрын

@@Roelox Can we switch to Discord for convenience?

@Roelox

Ай бұрын

Of course

@pheanoukma

Ай бұрын

same my display aint working

can you help me can i do this project with esp8266-07 with out nodeMCU pls

@Roelox

2 жыл бұрын

I don't think you can, but you could always try.

Hey man I am having some issues can you please help me out I would appreciate it …???

@Roelox

Жыл бұрын

Sure, do you have Discord? You can add me Roel#6931