No video
DDJ-FLX6 & TURNTABLES?!? "Faith & Reason Quick-Mix"
The DDJ-FLX6 is a DJ controller that doesn't have any inputs on it's channels, or DVS capability...so how did I do this setup?!?
Product links in the pinned comment below!
The DDJ-FLX6 is a DJ controller that doesn't have any inputs on it's channels, or DVS capability...so how did I do this setup?!?
Product links in the pinned comment below!
Пікірлер: 115
Product links: Pioneer DJ DDJ-FLX6 4 channel DJ controller www.zzounds.com/a--3970758/item--PNRDDJFLX6 Pioneer DJ PLX-1000 professional DJ turntable www.zzounds.com/a--3970758/item--PNRPLX1000 Shop at zZounds at www.zzounds.com/a--3970758 Direct Music Service www.directmusicservice.com 30% off first month, use promo code PJMONTHLY 10% off first year, use promo code PJYEARLY Get 7% off your first year to DistroKid distrokid.com/vip/PRIYONJONI
@patrickluka8513
3 жыл бұрын
a tip : watch movies at Flixzone. Me and my gf have been using them for watching loads of movies these days.
@turnersaint7956
3 жыл бұрын
@Patrick Luka yup, been using Flixzone for years myself :D
@mushvignabiyev8485
2 жыл бұрын
How did you connect turntables with flx6 , do you have video ,buddy ?
@redataoussi
2 жыл бұрын
That doesn’t answer how you did it! Can you help please?
Update: sorry I have not been able to create a tutorial on this video. The reason is because I was using an outdated macOS on my now retired laptop during the time which allowed me to use the now no longer driver-supported SL3 interface. The trick in a nutshell is, I used macOS’s audio/midi setup to aggregate the FLX6 and the SL3 as a single virtual interface. This allowed me to access it within rekordbox’s audio configuration, which further allowed me to assign the phono inputs for the timecode signal. Because driver support was discontinued for the SL3 by the manufacturer, I cannot use it on my newer laptop running a modern macOS like Monterey or Ventura. You might ask if this is possible with the Pioneer DJ INTERFACE 2, and unfortunately it is not. The reason is because unlike the SL3, the INTERFACE 2 is natively supported by rekordbox and will cause a handshake conflixt between the FLX6 and the interface. I’m doing some further research to see if we can find a solution. It may be the case we need to add phono preamps to a regular line level interface.
@giovannivicentin8438
Жыл бұрын
THANK YOU SO MUCH FOR THIS INFO!!! I almost bought a DJ INTERFACE 2 to try this setup!!!
@giovannivicentin8438
Жыл бұрын
Maybe using one DENON DS1 is possible? Since is an "upgrade" of SL3 and not a Pionner soundcard?
That scratch transition to Faith was amazing. Respect
Superb! Amazing stuff PJ!
@priyonjoni
3 жыл бұрын
Thanks Phil!
Magnifique ! J'ai un flx6 et jamais je n'aurais penser qu'il était possible de faire tout ça avec, tu es formidable, je t'admire
love the Shirt lol !! Such a funny time when that meme became famous!!
Connect the 2 turntables into a hub (the interface 2 of Pioneer) Connect the hub into the computer. Connect the FLX6 into a different slot of the computer. Run rekordbox and choose the Line 3 and 4 for each turntable. Am I right ? 😉
Damnn! Impressive, super awesome. Nice. Not jealous, I swear.
I use Dante virtual sound card and a Dante network interface with Virtual DJ and have had great results. I use Dante the way you would use rewire. I send the output of Ableton live into the input of Deck 3 of the flx6 and sync with Ableton link. Virtual DJ is really very powerful
Phenomenal 🔥 bro that DOPE❤️💯
This was really dope!!!!!!
@priyonjoni
3 жыл бұрын
Thanks! I appreciate it!
Dope brother. I have to shake your hand for this. Thanks for pushing the envelope. All that is missing is a sequencer drum solo by you. Lol
Congrats! Very top.
enjoyed this
ooooooooweeeeeee this joint FIRE !!!!!!! 🔥🔥🔥🔥🔥🔥🔥🔥
Amazing 👏 🙀 no words Bozki 👏 😍 ❤ 🙌
Dope scratching and mixing!!!
Hope there is a video how to connect this. I have the ddj flx6 and two technics 1200s. Would love to do something like this
@shotsbyjuju789
3 жыл бұрын
Agreed! I gotta see how this was all connected. Really cool!
@AprendeScratching
3 жыл бұрын
You can do that with any audio interface with two stereo phono inputs (or two interfaces, each one with one input). If there is no phono input in the interface/s (just line input), just get phono preamp/s to convert phono to line signals. He used a Rane SL3 (he said that in other comment, check it at 1:01 over the controller), but anyone should be ok. The only thing you need is having your DDJ flx6 connected (because without Hardware unlock devices or paid plan, Rekordbox won't work)
@da_gator_00
3 жыл бұрын
@@AprendeScratching Ah thank you. Now that I have some idea, I can try this. Thanks again
@seanehook
3 жыл бұрын
@@AprendeScratching so he ran the USB out from FLX6 to Rane and then to computer? Turntables plug into Rane? Sorry I'm new and looking at getting a FLX6 curious about the expandability.
@shmvon
3 жыл бұрын
@@AprendeScratching The FLX6 has no line inputs either.
Do a video tutorial to how to connect this amazing setup, great video pal
Great mix and great shirt! Lol!
Great performance!!!
Viny plus a controller 🧠🧠🧠🧠🤯🤯🤯🤯🤯.....nice shirt 😂
great video Joni, please make a video explaning how to get the best connexion with these devices , i have the FLX 6 too, sending regards from china , yours videos are so dope
Dope mix!!!!
Bravo.Mr Dj
Again your a boss 🙌
Brilliant 👍👍
So how did you connect the turntables? I just bought that controller, which I love, and would to connect turntables to use for channels 3 and 4.
@deang.6538
3 жыл бұрын
would like to know as well
@bahasamman
2 жыл бұрын
did you know how to do it ?
@liamginty
2 жыл бұрын
I haven't seen the controller but there should phono inputs for each channel. Use the RCAs from each turntable and plug into the phono slots for your desired channel.
@xgiizsul8429
2 жыл бұрын
should be channel 1,2,3,4 inputs on thr back which will take quarter inch or rca. run either cable from the turntable into either desired input mentioned and you should be game
@donjuanxolo9369
2 жыл бұрын
That has no aux in?
Fire🔥🔥💯
Nicce bro!! Love it
Awesome 👏
Wow this was really good
@priyonjoni
3 жыл бұрын
Much thanks!
Excelent.... Goooood
DOPE!!! 💯🔥🔥
@priyonjoni
3 жыл бұрын
Thank you!
How to hook up multiple controllers ?
Damn yo is insane
Nice!
Bad Ass can you do a video breakdown on some of the scratch combos you used in this mix?
@bigdaz7272
3 жыл бұрын
Yes please do this man :) Enjoyed your Q&A video/stream on Scratching also.
COOOOOOOOOOOOOOOOL
I vote DDJ-FLX6 + Pioneer Interface 2 (DVS interface) Or running both RBX and Serato at the same time, which would still require a Serato DVS interface.
@djwhitecastle
3 жыл бұрын
But since you can see the RBX logo on the control vinyl, most likely option 1
@AprendeScratching
3 жыл бұрын
Option 1, but with a Rane SL3 instead of Interface 2 (he said that in another comment). Seems there is no need to use _all_ Pioneer devices, only a "Device Unlock" one will be ok (the controller in this case)
@Iredidv
Жыл бұрын
Not used here, but rp 7000 and 8000 from reloop and re serato compatible imo. Cheaper than nd better than the plx1000
C'mon man, I'm dying here. How did you set that up? Tell us! Makes me 100x more interested in picking up an FLX 6.
@phillipdiaz4742
3 жыл бұрын
with a sound card!! just route your tt's signal in and route one of the out's as master! used to do this all the time on Traktor with an S2mk1!!
@AprendeScratching
3 жыл бұрын
With an external audio interface, I guess. Check, for example, at 1:01: you'll see a Rane SL-3 in front of the controller, with its two inputs plugged (they should be the turntables). Then, he may routed the SL-3 inputs in Rekordbox to virtual decks 3 and 4, and _voilà_ !
@oo7jbond
2 жыл бұрын
@@AprendeScratching do you need a DVS license?
@AprendeScratching
2 жыл бұрын
@@oo7jbond You need a hardware-unlock device with DVS plugged in the computer or a paid plan, according to the Rekordbox website. But that controller doesn't unlock DVS (according to the hardware-unlock list), so I don't know if he had connected another device as well not shown in the video (like a DDJ-XP1 or XP2, hardware-unlock devices with DVS), had a paid plan or if he used an older version of Rekordbox that allows that setup...
How do you connect a turntable to the controller
How do you connect ddj FLX6 with your turntables?? Interface but the cables where are connected??? Can you share a scheme?thanks in advance
@AprendeScratching
3 жыл бұрын
I understand he plugged the turntables into the interface inputs (the same way you would do it with Serato with that Rane SL3, or Pioneer DJ Interface 2, MixVibes U-Mix44, etc.) and re-routed those inputs to virtual decks 3 & 4 in Rekordbox (and activate DVS mode on them, of course)
¿Como es posible‽ Haver si haces un vídeo para que veamos las conexiones un saludo desde españa
Hi Pri yon joni, thank you for your very informative videos , can you tell us how your able to use your turntables as DVS with your flx6?, really interesting. God bless!
🔥🔥🔥🔥🔥👏🏾👏🏾👏🏾👏🏾👏🏾👏🏾
Scratch tho is in session and the tension wasn’t added yet
You had until one half of of WHAM!!!!!
DOPE #PRIYONJONI
How can I set this up I’m having a hard time wrapping my head around this…. Can it be done on any turntables? Like mk2 technic 1200s?????
Great hack. But its a dealbreaker that I can't play regular records and need timecode ones
That was awesome bro, may I ask what brand of turntable are you using?
@deang.6538
3 жыл бұрын
looks like the pioneer plx1000
how did you assign the turntables to control the deck 3 and 4?
IS that the Pioneer DJ INTERFACE 2 DVS Interface
RIP Biz Markie!
Awesome!!! What kind of device did you purchase so you can also utilize the 2 turntables?
@priyonjoni
3 жыл бұрын
I didn't purchase any device. I used an old Serato SL3 and aggregated it with the sound card of the FLX6.
Не совсем понимаю, как он через этот контроллер подсоеденил винил,когда на данной консоли кроме выхода на мониторнкю линию и юсбищины которая питает само устройство ничего нет,через какие каналы???🤥
I thought th DDJ Flx6 4 channels were software only?
Comment faites vous pour brancher 2 platines en plus sur le ddj flx6 y a pas de sortie prévue à l arrière ?
How did you connect the SL3 to the mixer ?
Hi Joni... Which do you think is the best turntable with Belt Drive or Direct Drive? thank you...
@priyonjoni
3 жыл бұрын
Always direct drive. I don’t even think DJ manufacturers produce belt drives anymore if I’m not mistaken.
What software you using there pri yon. Thanks @djpgrooves1
@priyonjoni
3 жыл бұрын
Rekordbox 6.5.1
@djunclephill422
3 жыл бұрын
Thanks bro, ,, @djpgrooves1
Hello how are you able to use the turntable with the DDJ FLX6?? My grandma gave me a turntable and I would like to use it as a 3rd deck in my DDJ FLX6
@priyonjoni
2 жыл бұрын
Used an old Serato SL3 box aggregated the SL3 and FLX6 on the Mac to read as a single audio device in rekordbox. This allowed me to pull up the phono inputs of the SL3. This is only possible with pre-Big Sur OS since the SL3 is no longer supported. However you can do it with a Native Instruments DJ interface.
Quick question, I’m using rekordbox with ddj 800 and wondering why it’s fine without controller but when I plug it in, the software seems to get laggy and glitchy. Thanks for any input
@nxtlvlhype490
2 жыл бұрын
Check tour latency. It should be around 256k
How are you getting the dvs control?
Hey pri yon joni can I able to connect ddj flx6 and ddj 200 at 1 software and set the decks of ddj 200 as deck 3 and 4??
@priyonjoni
3 жыл бұрын
My untested theory is, I think the DDJ-200 can only control the primary decks, while the DDJ-FLX6 can control all decks. The reason is because the DDJ-200 does not have a deck switch button. That's important in controlling decks 3 and 4. Only the DDJ-FLX6 has them between the two controllers.
Hey PJ, how did you do this setup to run all 4 decks independently? Is that an interface and if so is that the solution?
@priyonjoni
3 жыл бұрын
I used an SL3 interface, aggregated the FLX6 and the SL3 together on the Mac, and selected the aggregated audio device in rekordbox.
@charlesmcdonald345
3 жыл бұрын
@@priyonjoni I assume there’s a way to do the same thing with the interface and serato??? Please say yes and possibly make a video!
@priyonjoni
3 жыл бұрын
@@charlesmcdonald345 it cannot be done in Serato. Serato does not allow you to reallocate the audio devices. It may be the only DJ software without that option.
@charlesmcdonald345
3 жыл бұрын
@@priyonjoni well crap 😂. I was wanting do this with a DJ-sx2 and two Reloop 8000mk2s
Is this better than ddj 400?
@priyonjoni
3 жыл бұрын
More channels, larger jog wheels, and compatible with both Serato DJ Pro and Rekordbox.
Can i have some of your stickers
Hold up
So how did you connect the turntables? I just bought that controller, which I love, and would to connect turntables to use for channels 3 and 4.