Dave Krayem Ginetta G50 GT4 Snetterton test March 2016
Фильм және анимация
Dave Krayem in the Ginetta G50 GT4 which performed flawlessly at the first 2016 shakedown at Snetterton test on a very cold but bright day in March after a ground up winter rebuild by Ben Scrivens of Auto Developments.
Пікірлер: 49
thats a bad ass machine
It's a beast! D:
So this would modification would you need to fit in a 2016 v6 stock motor?
insane
What's the rev limit at?
What compression ratio do you have ?
One day ima have my 3.7 fully built with twin turbos and then people will see how powerful theses motors can be.
@acere23
5 жыл бұрын
I have a procharger running 11 psi and makes 475 on 93 octane . Haven't it dyno it on E85 but you can feel the difference on power. I will say is north of 500 rwhp. Planning to beef it up with forged internals.
@PozzaPizz
5 жыл бұрын
@@acere23 hey I'm looking to boost it too, but I'm going the ecoboost route. Any problems with internals?
@stepheneckart1416
4 жыл бұрын
@@PozzaPizz I have every bolt on installed N/A MPT tune rev limiter set at 7500 i hit it often and never have a problem. Also raced a ZR1 corvette in town only used 1st gear and we stayed next to each other he was pissed. 2.73 gears take me to 50.
@azazel7752
4 жыл бұрын
@@stepheneckart1416 you're my hero
@ValentinnPR
4 жыл бұрын
How much HP gain from cammed 3.7
what's up with that GD windshield wiper?
@benwhittle7204
7 жыл бұрын
More aerodynamic in the vertical position.
@benjaminschutz727
3 жыл бұрын
Better aero
Insane grip on those hides, eh?
You have info on the engine specs? Im interested in building one of these
Hey Dave, I just wanna know how and why you started out with the 3.8l ford engine. What made you start SS Motorsports in the first place? its so interesting because I absolutely love the 3.8 engine for ford. let me know if you ever look at this comment! thanks, great vid.
@chrishuber8930
4 жыл бұрын
Its the 3.7 dohc motor.
@BlacknRedSN95
4 жыл бұрын
@@chrishuber8930 the cyclone from the mustangs?
@chrishuber8930
4 жыл бұрын
@@BlacknRedSN95 yes sir.
@jimmyo436
3 жыл бұрын
I am thinking he is talking about the 3.8 that came in the 94-04 mustang's that was the first motor they started on
@GoogleEqualsEvil
3 жыл бұрын
Super Six Motorsports is an American company in the state of Georgia. The owner's name is Tom Yentzer. That would be the guy to ask. And as others have already noted, the engine in this video is the Ford Cyclone 3.7 DOHC V6 with the SS Motorsports 4.0 stroker kit.
Does this have a jenvey throttle body?
@drkrayem
7 жыл бұрын
YES, 450 BHP
@Dave-sj5ti
Жыл бұрын
@@drkrayem where can I get that throttle body? I want to beef up my edge with the same motor.
@keepitsolidkeepitreal2877
2 ай бұрын
Super 6 Performance 🤙
Am i hearing a turbo or supercharger in there?
@drkrayem
8 жыл бұрын
No, just throttle body air intake noise and a lot of it !!
@clements9690
7 жыл бұрын
TheGhost same engine that's in the 11-16 v6 mustangs yes
@makeKodyfamous
7 жыл бұрын
I think you are hearing the straight cut gears
How well would this work with a boosted set up?
@stepheneckart1416
3 жыл бұрын
Exactly what im going for I have a motor sitting in the garage waiting to be torn down.
@stepheneckart1416
3 жыл бұрын
I'm also thinking you would need to buy supersixmotorsports Direct Replacement Forged Pistons capable for boost. Im looking to do everything possible porting etc N/A see what it will do then get the correct pistons go further.
Is this guy the only one in the race? Everyone else is just out for a cruise.
What engine this thing has? I'm just trying to buy the 4.0l stroker kit for my mustang 3.7
@mikelliteras397
7 жыл бұрын
Draco 3.7 that's what this is. Supersixmotorsports.com.
@andrewbass3245
6 жыл бұрын
Well in the description on their website it says click here for 3.7 AND 3.5 stroker kit... so, he had a valid question, I would like to see the 3.5 ecoboost with the stroker kit, I’m extremely interested but can’t find a DROP of information on it....
@chrishuber8930
4 жыл бұрын
@@andrewbass3245 it wouldnt work i dont think.
Sweet but lose the wipers
so what can be done to a 4.0 SOHC ranger?
@Turshin
5 жыл бұрын
Lots. Call up supersix motorsports
@MIckveli2
3 жыл бұрын
id say hell yeah , but as light as mine is ( no weight in the back) all id do is cook tires alday ...lol
@keepitsolidkeepitreal2877
2 ай бұрын
Super6 MotorSports 🤙 they answer all my questions about how too pass smog and performance
wait?????? this is a ford 3.8 motor that i would find in a 97 mustang?
@fishin-4-mondos296
2 жыл бұрын
oh wait nevermind.. just reread the header
@AraceaeFanatics
10 ай бұрын
They do cater to your motor as well. They have a 4.3L stroker kit for you.