D4L Orlandoo Hunter 4in1 Radio System

The Orlandoo Hunter D4L Radio System provides multi-functionality for micro sized RC vehicles like Orlandoo Hunter cellphone size crawlers. It Features a 4-in-1 unit with a built in ESC, sound unit and light controller. Sound and light can be controlled within the transmitter. This radio system is a must have accessory to simplify the electronics setup, while adding increased functionality and simulation to your favorite micro model!
Available at www.tiny4x4.com
Features:
2.4GHz
Built in ESC with forward, reverse and brake function
Built in Sound module simulates engine start up, forward, reverse, idle and engine shut down sounds
Built in light controller provides headlights, auxiliary lights, double flash lights, turn signals, brake lights and reverse lights
Specifications:
Transmitter:
Operating Voltage: 4.4-8.4V
Frequency: 2.4GHz
FHSS Output Power: 100mW
Power Supply: 4 AA Batteries
Screen Type: Segment LCD
Receiver Module:
Operating Voltage: 6V-8.4V (2S LiPo or 6 cell NiMH)
ESC: Brushed Motor up to 1.8A
Sound Simulator: Amp up to 4.5W
BEC: Output 3.3V/0.8A
Low voltage cut off: @6V
Includes:
(1) D4L Transmitter
(1) D401E 4-in-1 Recever
(1) Light Expansion PCB
(1) Motor lead
(1) JST adapter
(1) On/Off Switch
(1) Speaker box
(4) 4mm white LED
(1) SMD 4 Color LED
(1) Seven color teflon wire
(2) Heat shrink tube
(1) Transparent Heat shrink tube
Join the Orlandoo Group on FB:
/ 946061995511068

Пікірлер: 8

  • @King-Bob-on-the-Rocks
    @King-Bob-on-the-Rocks6 ай бұрын

    Can it save some settings for diverent Rigs?

  • @tiny4x446

    @tiny4x446

    2 ай бұрын

    Yes it has 10 model memory

  • @nathanjorstad479
    @nathanjorstad4799 ай бұрын

    Does this remote support four wheel steering

  • @tiny4x446

    @tiny4x446

    2 ай бұрын

    No it doesn't have channel mixing for full 4ws options. You could implement a simple always-on 4ws using a Y-splitter servo harness but otherwise not.

  • @philipbrits2984
    @philipbrits2984 Жыл бұрын

    Does the brake function actually work, does it brake the motor?

  • @tiny4x446

    @tiny4x446

    Жыл бұрын

    yes it brakes the motor but it is a racing setup, not a drag brake - you have to push the trigger forward for brakes and to get reverse requires a double-tap. The brake function also only works with sound enabled.

  • @JasonAsathorx
    @JasonAsathorx3 ай бұрын

    Is that ok for Tt02 ?

  • @tiny4x446

    @tiny4x446

    2 ай бұрын

    If you mean the tamiya tt02 chassis then no. The receiver/esc unit is only designed to run the tiny n20 / n30 motors used in 1/32 models