EGR Explained 0:35 YD25 2:30 ZD30 5:20

thanks legend. Job done, you made it easy. The black smoke issue is gone instantly and all for $30

@jakecampbell8054

Жыл бұрын

still going well 11 months on? my d22 is starting to blow lots of smoke so am considering doing this!

On ya mate! Crackin vid. Cheers! 👍

This was great and simple thanks mate

@ap4x4

3 жыл бұрын

Thanks for your support mate!

Can you show us how to do the swirl mod on the zd 30 so it keeps your butterfly valve always open and sucking fresh air

Hey mate, quick question - is the exhaust gas flowing through the pipe towards the blanking plate you installed or does it flow from the blanking plate end of that tube through towards the passenger side of the car ? I’ve seen other videos where people have blanked off both ends too - is this required too or only at the end you blocked off ? Would you do anything different with your set up ? And can you do one showing to you set up your catch can please ?

Top effort! Very Informative videos, keep it up champ!

@ap4x4

3 жыл бұрын

Thanks for the support mate! 🤘

@damianisrael3373

2 жыл бұрын

i guess im randomly asking but does someone know a way to log back into an Instagram account? I stupidly forgot my login password. I would love any tips you can give me!

@kamarileland7116

2 жыл бұрын

@Damian Israel Instablaster :)

@damianisrael3373

2 жыл бұрын

@Kamari Leland I really appreciate your reply. I found the site through google and im trying it out atm. Takes a while so I will reply here later with my results.

@damianisrael3373

2 жыл бұрын

@Kamari Leland It did the trick and I actually got access to my account again. I'm so happy! Thanks so much, you really help me out !

My 2.5 D22 has always blown a ton of black soot. Do you recon this will fix it?

so if the cpu is expecting a ceritan amount of flow from the egr is the engine running rich, eg over fuel relative to the total volume of air input? as there should be a small volume of air contaminated exhaust gas added to the air intake.

Hi mate what is the link to the egr block off plate? I can’t find one on eBay that suits?

So do you on block that one side on the 2.5?

Is this a direct injection engine? Do you know if L200 mk3 4d56 is did?

You said you blanked the EGR in two places (on the YD25 I assume) so was the second blank put at the other end of that elbow shaped tube - where it connects to the cooler core of the EGR pipe?

@ngochuybk

2 жыл бұрын

Both end of the pipe. That's it

What happens to the hoses of the solenoid

Hey bud just curious?? Did u notice anything better or different when u blocked your EGR ?? E.g better fuel economy?? More power ?? Etc

@ap4x4

4 жыл бұрын

Hey mate, nope there should be no noticeable difference to the throttle or fuel economy. Its purely an emissions thing 👌

Hey mate, I'm still wondering if I blank the egr do I still need a catch can? Or just the blank and it's all done?

@ap4x4

3 жыл бұрын

Hey man, chances are you'll still have oil vapours creeping through the piston rings so a catch can is still a good idea if you're blocking the EGR 👍😁

Bro, best lift and biggest tyers for d22 zd30s We want your opinion

@ap4x4

4 жыл бұрын

Hey dude, do you mean like brand or size lift? Or like whats the best lift and tyres to run?

Hello friend, can you tell the internal diameter of the blue hose intercooler of min 2:33

9 months on, have you still got it blanked and would you do it again ? I want to know - where does all that gas go now once it’s been blanked off ? It must go somewhere .... a bit like a circumcision for your car 😆

@xunxhinexuicide

Жыл бұрын

It goes out the exhaust

Do any fault codes or engine lights through the ecu if you do this procedure?

@levidurant9515

2 ай бұрын

d22 is one of only cars where egr blanking seems to not be noticed by the system is what i’m aware

My D22 had done 120,000 (2014) Do you recommend a Timing belt / chain change or leave it alone?

Hey, dude. I pierced a hole in the pipe you loosened, just before the blanking plate. So fumes are escaping before the block. The question is, can I block the EGR from the first part you loosened instead as well to stop fumes escaping?

@ap4x4

3 жыл бұрын

You should be able to block it from both ends with the right gasket. Or a lot of people make their own 👍

@subtleinfluence9478

3 жыл бұрын

@@ap4x4 Thanks. I hit a gnarly track and the battery mount came loose and went _berserk_ flying around the engine bay, luckily only causing a small hole in the EGR pipe. It was a toss up between installing a $100+ replacement or blocking it for free. Have a good weekend, bro.

Do the D40 YD25 EGR blanking plates fit the D22 YD25 EGR?

@ap4x4

4 жыл бұрын

Never seen a side by side comparison but from memory I think I read that they do.

Do you have a video on the Swirl Mod ??

@ap4x4

3 жыл бұрын

No but I plan on doing one on my brothers!! I'll try and get those cogs turning! 😬

Gday mate, if I do egr block for 2002 zd30 do I need to do anything about the egr sensor?

@ap4x4

4 жыл бұрын

Hey mate, sorry for the late reply! Shouldn't have to do anything to your sensor, should be as simple as block and forget 👍

@mustafaaliraqi4891

4 жыл бұрын

Adventure Prone 4x4 all good thanks a lot

Hi did you do the swirl mod on the Yd25 to , when you blocked the EGR ? If you did how did you do this? Paul

@ap4x4

3 жыл бұрын

Hey mate, to my knowledge the swirl mod is only for the ZD30 and I haven't done it yet. I do intend on getting around to it though at some stage ✌️

@paulliddle7483

3 жыл бұрын

@@ap4x4 Thanks my friend, that’s put my mind at rest

What about errors ? Do you need to remap or anything of the sorts to stop any errors?

@ap4x4

3 жыл бұрын

Hey mate, you shouldn't need to. These are one of a handful of vehicles that don't need anything done after the block 👍

@xavierdobson7765

3 жыл бұрын

Cheers this was my question I was told if I do the egr blank on my 2012 d22 I would need to get it tuned, as I wouldn't idol fine.

@Raven-cf5qd

3 жыл бұрын

@@xavierdobson7765 my guess would be it depends on if the EGR inserts exhaust gases into the intake after or before the Oxygen sensor, I'm only just learning about EGRs but Even if it is after the oxygen sensor you may not need a tune because no excessive air is adding in the intake should be smooth still but I'm not sure

Do the YD25's need a ECU change after the EGR block?

@TacosCA

4 жыл бұрын

Nope, just block it and you're good to go

@robertmolek6377

3 жыл бұрын

@@TacosCA no, I do did block yesterday.. but now I get it yellow light (grilled chicken) on dashboard. N. D22 2008 2,5. ,sorry of my Eng.

Hey mate I got a d22 Nissan navara do I only have to blank the one egr

@ap4x4

4 жыл бұрын

Hey mate, in my last nav I blocked both, and now I only have one blocked, hasn't made any difference and have no leaks 👌

@aarongame7911

3 жыл бұрын

Gday mate do you still only need to block the one end , or did you end up blocking the other side also

@kevmitch4992

2 жыл бұрын

If u block one end it's similar to blocking both. Pointless blocking both

What block plate do I need for both sides of the egr ? Zd30

@warrendonga

Жыл бұрын

I cut a gasket out of a coke can 60.000ks ago

Hi, i have a yd25 but different egr pipe, I'm from malaysia

@mailnegro677

3 жыл бұрын

I am from kuantan.. Bosku

Searched the entire web and cannot find a yes or no answer. Does blanking the egr produce more soot out of the exhaust. (I’m a red p plater and want my zd30 patrol to soot😂)

@xunxhinexuicide

Жыл бұрын

Soot = unburnt diesel. Just get a really bad tune bro, it'll soot as much as you want.

Wow so simple.. I know someone who was charged $1000 to get there egr blocked off on their navara

I struggled with my zd30 just saying

Hey is that pipe ment to be kinda hot I put new oil in my bus today and realise that my 2nd battery is a little melted 😂

@ap4x4

3 жыл бұрын

That may be worth looking into man 😅

@Tasfarmer

3 жыл бұрын

@@ap4x4 so Is that pipe ment to be hot?

any check engine lights?

@ap4x4

Жыл бұрын

Nope, all clear!

If my yd25 has been remapped, will an egr block effect it?

@ap4x4

4 жыл бұрын

I wouldn't have thought so, alot of remaps will actually electronically remove the EGR function anyway. But I'm unsure whether a remap could have any impact sorry mate.

This work for American versions

@ap4x4

2 жыл бұрын

Provided the engines are the same I dont see why not 🙂

@Teekay617

2 жыл бұрын

@@ap4x4 never mind I forgot you have a diesel

What year is your nav

@ap4x4

3 жыл бұрын

2011 ✌

@Raven-cf5qd

3 жыл бұрын

@@ap4x4 reckon it'd be the same for a 2013? No ecu problems?

@ap4x4

3 жыл бұрын

@@Raven-cf5qd should be mate! Haven't heard of any issues with any of the year models!

Hey there did you get a check engine light after the blank plate is in. I've heard people who get them and other people who don't get them is their a step by step on how to do this or pretty much what your doing on this video is it thanks

@ap4x4

4 жыл бұрын

What I'm doing in the video is basically it. Its uncommon for the D22s to throw an engine light because of an EGR blank. You do hear the odd story but it is uncommon

@rosesolon9243

4 жыл бұрын

cheers mate If I did block the EGR and the light comes on, can you get rid of the light off or a scan tool is needed thanks

@ap4x4

4 жыл бұрын

@@rosesolon9243 should be able to use a scan tool or EDS to clear any lights 👍

@Marvindoidge

3 жыл бұрын

You can also drill a SMALL hole in the Centre of egr plate To allow a little gas to flow through. This should keep the light off. I did it on my Audi and it Worked. Now to try it on my pathfinder

Blocking egr on a d22 will put it to limp mode

@pauledmonds5558

4 жыл бұрын

no it wont

My EGR decided to die when I was doing important things like not wanting to stand on the side of the road. I'm sure the extra emissions are marginal compared to the governments share. Also your tax contributions will likely offset the dirty stuff. Get it gone.

Bro, what is going on with your fingers? Haha bloody never done any hard work

@ap4x4

2 жыл бұрын

Double jointed 😂 or at least thats what I tell people so as not to alarm area 51 👽

DON'T DO IT. ENGINE GETS TOO HOTE AND GETS LESS FUEL. LOWER POWER

Blocking an EGR is a bad idea. It causes cylinder overheating & turbo overheating issues. It is not just there for pollution reasons.