Push the fuel button several times, then push the pre heater button until at least 40 seconds or until you here it pop, Press the fuel button a few more times then put your hand on the preheated, if it feels hot pull the excellerator lever towards you About 25% and then press the starter leaver.

Relaxant ❤

Beautiful restoration.

The heater plug arrangement is a flame heater. The way it's supposed to work is by igniting the diesel from the hand primer in the manifold, cranking the engine then draws those flames through the engine to provide the heat to get it going. One or two shots of the hand primer is all you need before hitting the heater plug. As the others have said wait for it to go pop after about 40 seconds. Pumping it excessively as you were will just take the heat out of the plug and put any flames out. It's not designed as an excess fuel arrangement.

Merci!

one push on the fuel primer 40 seconds on the heater button you have a not clue a how to start a dexta.

bravo et bon filmage mais il a du mal mais bon c des anciens mas sa sa tire ;);)

Vous n Avez pas de surcharge sur votre pompe a injection ?

Bonjour J'ai un problème avec mon fordson il ne démarre plus tu peu m'aider

Ah ulan ah emektar

Bonjour, on ne voit aucune manoeuvre sur les commandes du tracteur ni aucune explication, dommage !

It's literally an engine on wheels.

you need a lower radiator hose heater

Il a u du mal

bonjour quelqu'un peut il entrer en contacte avec moi ..........problème mécanique ford super dexta 3000............merci

Nice video! Check out my 1958 Dexta pulling up a tree (2 minute video in full HD)

O meu Fordson Dexta também é ruim de funcionar,

You clearly dont know what to do my man.

Man you are ruïning this thing... When its starts like this you need to fix it!... When it’s technical decent it has to start within 5 seconds

il a du mal