Sorry guys! My english is bad so I can not answer all your questions.

@Circuitoptimize23

7 жыл бұрын

TE hey its no problem keep it up you channel

@zero-two_9346

7 жыл бұрын

do you speak czech

@akari6468

7 жыл бұрын

TE what resistors and other little components are you using

@TE.

7 жыл бұрын

fanatic fight I speak Vietnamese (^_^)

@TE.

7 жыл бұрын

LaPartDuDemon FR 330 ohm resistors and any diode

Bro! This video is 4 years ago, and it's nice that you are still reading all comments and replying them!! Good Job Bro!!

For those who ask, here are the components: - LED Diode (Mix Red, Green, Blue, Yellow, White) - www.ebay.com/itm/191993698350 (Select 5mm) - Diode 1N4007 - www.ebay.com/itm/192068989014 - Resistors 1/4W (0.25W) 330 Ω - www.ebay.com/itm/192076577170 (Select 330Ω 330 Ohm) or - Resistors 1/2W (0.5W) 330 Ω - www.ebay.com/itm/192095442830 (Select 330Ω 330 Ohm) I hope this helps :)

@neverman3398

3 жыл бұрын

Yes at last, someone else who knows flashing LEDs.

@neverman3398

3 жыл бұрын

They change colour with the intensity of the bass which is a far more exciting visual display.

Great video. Step by step, you showed how you did it. One thing I liked in particular was your use of that type wire stripper. I use that type constantly unless, of course, on coax. I let an ''electrician'' borrow them once & he didn't understand how to even begin to use them. Keep up the good work.

Una pregunta q fue lo q puso aparte de los fokitos y si eso no genera una resistencia q interfiera con el bajo o distorcion en el sonido?

Which pin have you kept common cathode or anode?

First, great video! My only wish is I had the confidence to try this. I'm afraid I'd need something up. Second, your box is a crazy looking box!

Can it make any effect on ic. Because it take light by speaker.

I don't know why but this was oddly satisfying 😂😂

Strip lrd install kar sakte hai

Installation on a cheap system like this, what would you personally sell it for compared to what you payed for it?

bro, I have tried to apply, how to make the LED lights on the speakers, but the ones that live are just next to it, not on everything, with the rhythm of the song. Please enlighten me ok.

is this change the ohm speaker?

Gj. your speaker is not ugly. everything is beautiful handmade. respect for labour.

Gan,klo gak pakai tegangan volt gimana hanya mengandalkan dari output audio aja , mau sy pasang disound outdoor pasif

Bhai kon sa ragiter lagya kuch batya hi nai. Light kaisi lagya + ya - kaisi lagya.

Are these speakers or woofers

would car audio default speakers be good to run leds i mean i will try either way but i would like an answer :D

does this change the resistance to the amp as in 4-8ohm enough to become out of normal range or is it minimal,anyone feel free to answer,thanks.

what speakers are those?

Can anyone send me link to the parts used other than leds

Beautiful woodworking their man I am a Carpenter and I know how much it takes to do that

what will happen to the impedance of that speaker? is still the same?

How many ohm's and watt this speaker hai?

@TE I follow what you did and got some few results only 2 to 3 LEDs are reactive and the lights of those 3 LEDs was so weak. Can you tell me where did I go wrong?

@as424100

5 жыл бұрын

Your amp is probably not strong enough, less diodes or a smaller resistor value

Pls told those names and how much all amps,watt, and etc

Or you could install led strips inside and run their positive and negative to the speaker wire so they only get power when the sub gets power

Beautiful ..gifted man ..

Me gustaría hacer un cajon así como ese, serias tan amable e instruirme?

Só uma pergunta você ligou direito no auto falante dessa forma para os ledes assenderem quero colocar no meu som cj lg 87 será que dar ser direto o volume dele! Obrigado.

@tassioribeirodesouzaribeir5202

4 жыл бұрын

Só ligar junto com os terminais do alto-falante. Positivo e negativo com resistor.

Bhai apne diod kon Sa use kiya ha

I don't have a red outer edge I have a black what type of lights do u think whould be the best or how do you think I should place the lights

@TE.

6 жыл бұрын

I'm planning ... You see in the next few days

@justindailey1862

6 жыл бұрын

Thx

@samuelthabah2643

5 жыл бұрын

Would a white led light work on black foam subwoofer?

What song was that in intro?

How to make lights under those speakers?

hi, great work. can u make a list of the circuit components you used? thanks

Excelente quedo muy bien una 0regunta alguien sabe el nombre de la música que sale al final?? Tank you

I think amplifier was made for sounding speaker and not for lighting led bulbs. By the way, i love your speaker box.

Uauuuu que top mano parabéns eu ja gostava de led em alto falante ai vi esse vídeo gostei demais da sua ideia parabéns

bhai 12v dc led light ko 4440 ic amplifire m kasa fixd keru

An way more easy by conect the leds and resistor is don't cut completily and use the exedent of each component. And don't use many cable.

Wow lo que buscaba para mis altavoces Muchas gracias

so what is the ohm of the speaker after this mod i am curious

I want to ask if the resistor is connected to the led is negative or positive

@TE.

6 жыл бұрын

negative or positive is ok

Kon sha register or dayvad he

song name in the intro when you show the speaker working

very easy and well explained, thanks!

my amplifier outputs 200Watt RMS. is there any risk of burning or damaging my amplifier or subwoofer if i use this method of yours?

@TE.

7 жыл бұрын

There will be no effect on speakers and amplifiers. If the led is burnt, increase the resistance value

Sir agar led strip laga da toa same woo bii iss tarah blink hogi plz ans

@mtf6285

4 жыл бұрын

Plz answer

His work is super clean. Bhai Bhut brdiya creativity thi. Keep it up.

what is the song playing at 6:30 (its not the beginning it's just playing through 6:30)

Pls tell me abt the resistor???

j onde eu gostei muito do projeto de quantos anos o com quantos homens é o resistor coloca no

thanks for the music. new headphones are paying off 😎

It is a 330 ohm resistance and IN4007 diode

why is the diode needed ? leds act like diodes right ? i mean i can be wrong but please help i will build something like this and i would need to know.

@TE.

7 жыл бұрын

Thank you! Dylan Halouska

@C4ke115

7 жыл бұрын

Zamorakian leds don’t Act like diods. They are diods. LED = Light emitting diod.

1 led light = 1 resistor? does resistors has a different type? what did u use exactly?

@as424100

5 жыл бұрын

It's a parallel connection

So great idea bro

Can we use it with 4ohm....20watt subwoofer Please answer me

@TE.

4 жыл бұрын

Yes

What are the black things and the small barrels? :P

If i want make with 1 LED then how many ohm resistance resistor need? :D

U do know that u can wire led that are dc powered to begin with direct with no resistor or anything ....its always worked fine for me....

I like your idea. Whats the value of the resistor?

@TE.

6 жыл бұрын

Resistor 330 ohm

i like it but why not just use a LED strip?

What were those small cylinder things and the black box one? model numbers?

@TE.

7 жыл бұрын

Resistor 330ohm, diode (any diode) and led light.

@albertoloyola1685

7 жыл бұрын

Awesome thank you very much

Esta chido tu pela cable... donde puedo conseguir uno..?

@germancortes3346

5 жыл бұрын

Este tipo de pelacables se consiguen donde vende todo tipo de herramientas para electricidad.

This Is Probebly A Stupid Question But What Type Of Wire Did You use?

@Twikkilol

7 жыл бұрын

Looks like normal speaker wire, silver. :)

Anyone know song at 3:07 ? Thanks

Brother, I want to ask you for items that are needed, whatever they are, sorry, I'm still a beginner

@TE.

4 жыл бұрын

Diodes, 3V LEDs, 330 ohms resistor

good job sir.. may i ask u slmw questions. wher is the negative and positive in your led .. in doea not work on my sspeaker.. pls respect..

@TE.

6 жыл бұрын

kheotay.com.vn/wp-content/uploads/2016/04/C%E1%BB%B1c-%C3%A2m-d%C6%B0%C6%A1ng-tr%C3%AAn-LED.jpg

@TE.

6 жыл бұрын

(^_^)

@jopatlasafin8795

6 жыл бұрын

how about the position of your led in you project...

@christopherpenafuerte1902

6 жыл бұрын

put the diode in series to the LED. follow the + and - of the speaker.

What's the name of the song when you were taking the speaker out

@TE.

7 жыл бұрын

"cold-rise"

what size resisters did you use. and what capacitor?

@TE.

6 жыл бұрын

330 ohm resistor and 1 diodes

This is amazing dude

Whats that little black thing thats conected to resistor and goes to speaker +

@TE.

7 жыл бұрын

It is diodes

@BestPlconEarth50

6 жыл бұрын

diode

Will it effect the sub? Giving it less power because it giving a bit to the lights?

@TE.

6 жыл бұрын

Don't worry!

What is the vale of resistors and diode?

@TE.

4 жыл бұрын

330 ohm resistor and any diode

nice video

what is the name of the song you used in the prewiev?

@TE.

7 жыл бұрын

"Cold_Rise" (^_^)

List of Components?

boofer ke part me led lights kaise jode joint kare

Music final?

Good Idea Bro !! Like !!

Nice video

Not bad... I like that you put the time in and didn't use a generic light strip. 5mm superbrights bulbs put out a better glow in my opinion... I wired up my 12's in my Silverado (under seat) put all led bulbs underneath the box. Left the bottom open ... when the subs hit hard and the Red superbrights kick in looks and feels like Satan himself is cracking open the bottom of my truck lol bad ass

@TE.

6 жыл бұрын

kakaka... thank's bro (^_^)

hola amigo,esta genial tu video, muchas gracias por compartir tus conocimientos y por hacer todo de una manera diferente e interesante, tienes un nuevo suscriptor.

thank you

beautiful wood speaker

Good job TE. Will the diode 4007, 330 ohm resistor and the led lights change if the speaker ohms go up in power ? Anyone can help answer this. Thanks

@rdrack8693

7 жыл бұрын

Joe joe hi, a 1 amp diode will work for a lot of LEDs, but the resistance will have to change depending on how many volts is the maximum your amp or speaker can hold, use a led calculator, I like this one ledcalculator.net, most LEDs will draw approximately 20/30 mAh

@rdrack8693

7 жыл бұрын

and remember to multiply that result (voltage) by 1.6 because of the rectification

would this work with just a LED strip?

@neverman3398

3 жыл бұрын

Yes apparently

Tôi thích phong cách của hộp loa của bạn, rất tốt đẹp, lời chúc mừng! video tuyệt vời! (Tôi hy vọng rằng dịch giả của Google, tôi đã dịch tốt từ tiếng Tây Ban Nha)

@TE.

6 жыл бұрын

Dịch giả của Google đã dịch rất tốt, đọc bình luận của bạn tôi cứ nghĩ bạn là người Việt Nam 😍

is they work on home theatre woofer

@Peders1

7 жыл бұрын

ashutosh kumar yes

hello sir can you send me the diagram of this project cauze it not working in my speaker. i think the polarity of my led is the problem.. thank you..

@TE.

6 жыл бұрын

Increase the volume of the speaker, if the light is still not light, then reverse the pole again

what diode you are using

@TE.

7 жыл бұрын

You can use any diodes

what resistor did you use men...?? is it 1k resistor..??

@TE.

7 жыл бұрын

Resistor 330 ohm (^_^)

what capacitor did u use

@David-wh8zs

7 жыл бұрын

None, he just used a couple of LED's, resistors and a diode.

los componentes?

oo!! amazing job!!

Tem um doido de bloqueio de passagem no positivo

What's the name of 'this song

Nice....... Good luck