CZ P10C -Tips, Tricks and Hacks
Hey everybody, here's a couple of tips, tricks and hacks for your Gen1 P10C. Please let me know down in the comments if you guys like it so i can continue to release more content. Thanks!
P07/P09 to P10 Magazine Mod - • P07 to P10c magazine c...
Apex Replacement Magazine Release- • How To Install The Ape...
Gen1(Pre2018)P10C Known Issues- • CZ P-10C - Known Issu...
and here's my other social media...
/ gutz-n-gunz-. .
/ gng1915
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK*! All work on firearms should be carried out by a licensed professional and all state and federal rules apply. I am not liable for any injury to yourself, and or damage to your firearms resulting from attempting anything shown in any our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT* sell or deal in Firearms. Such a practice is regulated and subject to applicable laws. I DO NOT* sell Parts, Magazines, and or Firearms. These videos are free to watch and if anyone attempts to charge for this video please notify us immediately! By viewing or flagging this video you are acknowledging the above.
Fair Use: In the rare instance I include someone else’s footage it is covered in Fair Use for Documentary and Educational purposes with intention of driving commentary and allowing freedom of speech.
Пікірлер: 133
Have to appreciate a guy that can slip the word phalanges in a gun video.
I just got the CGW (Cajun Gun Works) edition CZ P10 C. Prior to shooting it, I had never touched a CZ. After shooting it, I found the trigger is nicer than my Gen 5 Glocks, the capacity equals my G19 and the grip feels much more comfortable as well. Due to the chrome/custom slide, it’s definitely heavier than my Glocks, but I really like the feel of it. 250 rounds so far and no issue. Good video!
@gutzngunz1897
4 жыл бұрын
Fear None But ONE noice👌🏽 keep us updated✌🏽
14:44 that smoke detector going off had me thinking it was mine lmao
Just purchased my first firearm. Cz p10c. Thanks for the tips. On a side note I noticed the Spurs hat and the big rig behind you. Im a truck driver from Dallas and ready for the playoffs. Thanks again I subscribe.
@gutzngunz1897
4 жыл бұрын
thanks Pete!✌🏽
Nice tips. Giggled about the 'tactical" remark.😂 Thanks friend.
I have a P07 made earlier this year. I just picked up a used P10c made in 2021. The mags work in both guns. I'm very happy !
That auto forward features makes me want to get a P10C as my next pistol 👍
That last bit of info alone was worth the watch & sub
@darrenbishop4327
3 жыл бұрын
Same. I have a gen 2 but I’m new to the cz p10 world.
Cool video. I bought the Gen 2 P-10c to avoid some of the known quirks/issues the Gen 1 had. But I researched the P-10c very well before I decided to buy one and I was very impressed. There are other things that can be issues with the Gen 1 P-10c, most Gen 1 have already been fixed, but your's hasn't you can send it in and CZ will fix all the known issues that can cause a malfunction. I love my P-10c so far and I put a Streamlight TLR-1 HL on it. But I gotta buy a new holster now if I want to carry it with the light on it, and that will take a while to get the money for that. Great light though. Thanks for sharing the cool video. 😎👍 SUBSCRIBED 😁
@gutzngunz1897
4 жыл бұрын
william grissom appreciate it William thanks for the sub!👍🏽
@jackrathert459
2 жыл бұрын
I like the gen 1 for the Ambi mag release, I like the gen 2 Optic Ready as well 👍 gen 1 had problems with the slide release which I never experienced however on one of my gen 1’s a local CZ shop replaced it free of charge 👍
Good job
You may know this, if not try it,it will blow your mind, after your final shot (As you know, the slide will return to the rear position, as do all pistols-semi-automatic. With the CZ-P10C, if you SLAM a fully loaded magazine, the slide will automatically return to the closed & ready to fire position. Hitting the slide return is not required. I showed this to 2 people at a local gun range & they were blown away. I do not know if this is bad for the pistol or not. I have only done it about 6 times. I think it is worth trying, just so you know in the event you need a life or death emergency reload. Remember I said SLAM the fully loaded follow up magazine. Best of luck, take care-God bless.
That gun belt shows the Gutz in Gutz n Gunz 😂 Good Video Mr Koby!
@kobyjones9657
4 жыл бұрын
Mike Salinas 😂 damn skippy
Good information, I bought one today and like what you have said.
I have the Gen 2. It’s a great firearm. Thanks for the video. I just subbed.
@gutzngunz1897
3 жыл бұрын
Thanks 🐻✌🏽
@brentfoto
Жыл бұрын
@@gutzngunz1897 how can you tell Gen 1versus Gen 2?
@bmo5906
Жыл бұрын
@@brentfoto on the newer ones there is a small notch on the right side on the slide cover plate.
@brentfoto
Жыл бұрын
@@bmo5906 does that play any role in stripping the slide?
Use the canik tp9 sfx holster fits perfect
12:20 I have the P10F and that auto release is built into it, although I've seen a couple "experts" claim it's a safety malfunction.
@MrPerry61
3 жыл бұрын
I also bought a couple 21 round mags. no issue with them.
"Tactical tummy" haha. Very nice video sir.
@gutzngunz1897
4 жыл бұрын
DesertGhillie lol thanks!✌🏽
@bryantherocker
3 жыл бұрын
@@gutzngunz1897 I AM WORRIED ABOUT THE CZ P10C OVER THIS WEAK STRIKER SAFETY BLOCK, CAN YOU PLEASE DO A VIDEO REVIEW AND ANALYSIS OF THIS SERIES OF VIDEOS ON HIS CHANNEL kzread.info/dash/bejne/pH99t9KNdMXUZtI.html ..................... www.reddit.com/r/CCW/comments/cqshim/psa_the_cz_p10c_appears_to_have_no_functional/
@gutzngunz1897
3 жыл бұрын
@@bryantherocker Thanks for the suggestion Bobby, really critical info here for all p10 owners. However this is just a fast and fun range toy for me,I have NOT and most likely WILL NOT ever use this firearm in a carry scenario. I EDC a Glock💪🏽 and Taurus🤦♂️believe it or not lol.🤷♂️
I wasnt aware that there was a gen 1 and gen 2 czp10c. Love mine, I guess mine is a gen 1. The mag release was hard as all get out. After like 300 rounds of so it kind of loosened up.
Thanks for the video, man! Cheers from Colorado
@gutzngunz1897
4 жыл бұрын
Aaron Denby thanks!✌🏽
Thanks men great video Good informations continue the job 👍 u good 💪
Always love me my Dale Fricke holsters.
Im new to guns. Does the p10c come in different colors? Ive seen the black one in stores but that desert green looking one looks dope
ayy go spurs go, just got myself a p10c im stoked
From one Tactical tummy brother to another, geat video.
@gutzngunz1897
4 жыл бұрын
Fred Ted lol thanks Fred!✌🏽
Great video, awesome tips and tricks thank you
Thanks for the help!! This video was awesome!!
Boss thanks for the auto forwarding tip
Had a beretta apx holster lying around and it fit perfect in that one too, crazy
@gutzngunz1897
4 жыл бұрын
good to know🤔👌🏽
Good vid
Sweet Home San Antone !
why would there be harm with the auto forwarding if you dont touch the trigger...
Egw plate or deuck plate for rear sight dovetail. Trijicon rmr and tlr-7 light fantastic everyday carry.
@gutzngunz1897
4 жыл бұрын
never heard of those...nice ill check em out👍🏽
Great video!!
Good, thx
Auto forward feature man the first time my P10c did that I was sure it was a defect LOL
Enjoyed the video my p07 auto forwards but only 70 percent of the time so I rack the slide every time thanks
@gutzngunz1897
3 жыл бұрын
Yeah I’ve noticed that too, holding at a 75 degree angle when slamming the mag should make that auto fowarding more reliable✌🏽
Boy I see that nail orale, great video
@bill3212
3 жыл бұрын
Any tips on cleaning extractor and that mechsnism?
@bill3212
3 жыл бұрын
mechanism? Hsrd to figure out and every g hing
Very good "gordou" the hack #1 it is perfect for me because I was look for some IWB holster for CZ P10C .380
My P10C fits in my Springfield XDM holsters
@gutzngunz1897
4 жыл бұрын
Jason Ferraro nice 👍🏽 what brand is your holster?
Standard co holsters
Good job brother !
@gutzngunz1897
4 жыл бұрын
Thanks Troy!
The whole slide going forward when you slam the magazine in thing isn't new. CZ took a design flaw and tried to advertise it as a feature. My Gen3 Glock17, my Smith and Wesson SD9, SD9VE, and SD40 do that. My buddy's FN FNX .45 does it too. It's got something to do with the polymer frame flexing and vibrations. My buddy explained it to me in detail the other day but I wasn't really listening because i was driving a pretty squirrely old truck through the mountains in a pretty sketchy rain storm.
@gutzngunz1897
4 жыл бұрын
Daniel Deleon Yup your right, it’s just most people don’t know about it.
Thanks for the vid
p-09 fits 21 bullets btw. 🥰
@gutzngunz1897
3 жыл бұрын
Thanks for the clarification Robert✌🏽
What stippling do you have on your P10C? Love the looks of it.
@hornshwangler
3 жыл бұрын
It Looks like some kind of grip tape but I could be wrong.
@Soleedus
3 жыл бұрын
Those are $20 TALON grips (rubberized black).
@gutzngunz1897
3 жыл бұрын
@@Soleedus what he said!👆🏽👍🏽
Buen video. Thanks.
@gutzngunz1897
4 жыл бұрын
Gracias.
Good video though
do you know revolver alpha proj 3541s stainless 357magnum construction czech republic opinion thanks in advance
Hey, don't say that, big guy... I think your tummy is super tactical! Thanks for the info! Glock19 gen3 or Cz p10c?
@gutzngunz1897
3 жыл бұрын
If it’s your first or only handgun go Glock, if you already have one the CZ mos def👌🏽
Mmm perfect got it lmfao
Go Spurs Go
Is that model or type of pistol is available and legal to buy in California because not all State have the same law in buying gun.
@gutzngunz1897
4 жыл бұрын
Usee Mehere I’m not qualified to give legal advise brother but your safest bet would be to reference your state,county and city laws✌🏽
@christophercrooks4310
4 жыл бұрын
Usee Mehere all 9mm semi automatic pistols are legal to buy in California. It’s only the carry laws that are different state to state. CZ is becoming one of the more popular pistol brands so should be available in most states.
@fredted5115
4 жыл бұрын
@@christophercrooks4310 He would have magazine restrictions, but yes it would be available in California.
@christophercrooks4310
4 жыл бұрын
Fred Ted yea I expect he will only be able to carry a 10 round magazine
@creepingdeath4life359
3 жыл бұрын
yes the one i bought here in indiana had 10 round California compliance magazines in it so i bought a 15 round mag separately.
Qvo holsters are great
@gutzngunz1897
4 жыл бұрын
MrLuckeastwood been looking for an excuse to buy one lol
@MrLuckeastwood
4 жыл бұрын
@@gutzngunz1897 you won't be disappointed
Had a friend make a holster from kydex and never had to do the trial and error of fitting the glock holsters. Great info if that's not an option
@gutzngunz1897
4 жыл бұрын
for sure👍🏽
That would be "All intents and purposes"
@gutzngunz1897
4 жыл бұрын
thanks.
@jimtheedcguy4313
3 жыл бұрын
But what if your purposes are... Intense?...
Orale koby
How can u tell if you have a gen 1 or gen 2? Just picked mine up this week
@jonathanlarue2584
4 жыл бұрын
Ambi safety vs reversible safety
@gutzngunz1897
4 жыл бұрын
Diehard Outdoors What he said👆🏽
@diehardoutdoors
4 жыл бұрын
Jonathan Larue what safety sir?
@gutzngunz1897
4 жыл бұрын
@@diehardoutdoors lol yea mag release we meant to say😅
@diehardoutdoors
4 жыл бұрын
GutzNGunz I figured lol
Subscribed! GO SPURS GO!!!
@gutzngunz1897
4 жыл бұрын
Rob Peterson Yes sir!💪🏽
Nice review. Thanks. Got a question: Cowboys or Texans?
@gutzngunz1897
4 жыл бұрын
Jeffrey Marion reference my other videos...leave a comment when you figure it out😉
@jeffreymarion6791
4 жыл бұрын
@@gutzngunz1897 So it's Raider Nation. Ok! I can roll with the Black Hole but I'm Cowboys all the way.
@gutzngunz1897
4 жыл бұрын
@@jeffreymarion6791 c-mon, you know im true blue!
@jeffreymarion6791
4 жыл бұрын
@@gutzngunz1897 OK then!! We family!
@gutzngunz1897
4 жыл бұрын
Jeffrey Marion 🤟🏽
1:30 “all intents and purposes”
@gutzngunz1897
4 жыл бұрын
yahya sabree duly noted thanks👍🏽
If I could il give you 100 likes for autoslide. TXN 👊💪🇷🇸
Go Spurs Go..:)
My P-07 is carried in a Glock 19 holster
@gutzngunz1897
4 жыл бұрын
fdm1968 good to know those fit too👌🏽
ANR DESIGNS
@gutzngunz1897
4 жыл бұрын
MogerGuitar I’m really curious about their magwell🤔
@MogerGuitar
4 жыл бұрын
I personally don’t have one, but I can definitely tell you they are a quality company. Great products and awesome customer service. That being said, I’m sure the magwell is tits
Will glock 19 mags fit in a cz ??
@cmmn_crdnl
3 жыл бұрын
Nope
Gen1? Theres a gen2?
@gutzngunz1897
4 жыл бұрын
keos x col CZ doesn’t label them as such, but there has been rolling changes made to the P10C since it’s inception. One could say that the optics ready model is their 4th or 5th iteration(“generation”) of the P10 model.
@keosxcol3301
4 жыл бұрын
@@gutzngunz1897 I just purchased the suppressor ready version, where do I find more or less In what generation braquet or timeline for generations in general ?
My P10c will not cycle.
@gutzngunz1897
4 жыл бұрын
Donald Denny check your guide rod...on early gen’s the hex key that holds the springs captive tend to walk...
@5ddenny
4 жыл бұрын
GutzNGunz it’s a new gun. I’m not sure what gen it is.
@gutzngunz1897
4 жыл бұрын
Donald Denny check if the guide rod and springs are being held captive properly...
pulling the trigger is not part of the unloading process... its part of the shooting process