Hi we are having problems with our ford transit connect, with the timing settings the belt lost most of the teeth so we have checked the top end of the engine and that was fine except 2 rocker arms which we replaced all and we have set up the timing belt as you have and when we try to start it, it will not and we have noticed at the air filter it blows instead of sucking any advice cheers Dave 👍🏻
@the-senior-tech
Жыл бұрын
Check camshaft. After valve-piston collision in these engines the lobes spun.
@stephaniepage10044 ай бұрын
Hi, can i ask how long it took you roughly? wondering if its something i should get a garage to do or do at home (have done others but not this engine) thanks
@the-senior-tech
4 ай бұрын
Removing, cleaning and installing head around 12hr.
@donideniro31859 күн бұрын
Hallo, erstmal gute arbeit, habe das gleiche bei meinen grand picasso 1,6 hdi gemacht, alles soweit richtig nur springt der nicht an dreht nur. Muss ich den kraftstofffilter vorher füllen ? Gepumpt habe ich es scheint das der kein diesel bekommt hmm
@the-senior-tech
2 күн бұрын
You need to bleed the system, ideally with a vac bleeder.
@EnricoPalazzo Жыл бұрын
Could you tell me, why you decided to remove head? I have the same car and engine, and it's eating some coolant with no leak outside :c That was worn head gasket in your engine too?
@the-senior-tech
Жыл бұрын
Hi. It was pressurizing the cooling system and overheating the engine.
@tommi59tk Жыл бұрын
Hi at 6.35 there are placed tiny orings between rockers how they are called what for and what is part number?Anybody knows? I will need to replace silicone under camshaft cover
@the-senior-tech
Жыл бұрын
Hi, Part no 2S6Q-6L623-AA. They seal camshaft oil feeds.
@tommi59tk
Жыл бұрын
@@the-senior-tech thank you very much
@tommi59tk
Жыл бұрын
@@the-senior-tech Can I get it seperately or is in head gasket set only? What is the size of the orings they are special one? Can I get ireplacement in any car parts shop?
Пікірлер: 18
Nice job, detailed explanation thanks!
Satisfying Job man! ✌️
Hej. Po akcencie czuje ze PL. Spoko wideo. Wkoncu zrozumialem skad mam delikatny wyciek przy wtrysku.
Tutorial detallado : kzread.info/dash/bejne/amRpy9yBYq_MnMo.html
Hi we are having problems with our ford transit connect, with the timing settings the belt lost most of the teeth so we have checked the top end of the engine and that was fine except 2 rocker arms which we replaced all and we have set up the timing belt as you have and when we try to start it, it will not and we have noticed at the air filter it blows instead of sucking any advice cheers Dave 👍🏻
@the-senior-tech
Жыл бұрын
Check camshaft. After valve-piston collision in these engines the lobes spun.
Hi, can i ask how long it took you roughly? wondering if its something i should get a garage to do or do at home (have done others but not this engine) thanks
@the-senior-tech
4 ай бұрын
Removing, cleaning and installing head around 12hr.
Hallo, erstmal gute arbeit, habe das gleiche bei meinen grand picasso 1,6 hdi gemacht, alles soweit richtig nur springt der nicht an dreht nur. Muss ich den kraftstofffilter vorher füllen ? Gepumpt habe ich es scheint das der kein diesel bekommt hmm
@the-senior-tech
2 күн бұрын
You need to bleed the system, ideally with a vac bleeder.
Could you tell me, why you decided to remove head? I have the same car and engine, and it's eating some coolant with no leak outside :c That was worn head gasket in your engine too?
@the-senior-tech
Жыл бұрын
Hi. It was pressurizing the cooling system and overheating the engine.
Hi at 6.35 there are placed tiny orings between rockers how they are called what for and what is part number?Anybody knows? I will need to replace silicone under camshaft cover
@the-senior-tech
Жыл бұрын
Hi, Part no 2S6Q-6L623-AA. They seal camshaft oil feeds.
@tommi59tk
Жыл бұрын
@@the-senior-tech thank you very much
@tommi59tk
Жыл бұрын
@@the-senior-tech Can I get it seperately or is in head gasket set only? What is the size of the orings they are special one? Can I get ireplacement in any car parts shop?
@the-senior-tech
Жыл бұрын
I used standard 6mm o-rings.
@tommi59tk
Жыл бұрын
@@the-senior-tech THANK YOU