Great job. I had an 85 cutty back in the day to this day the smoothest car ive driven

Do you SLEEP? IF you do you build cars in your DREAMS.❤

@thecadillacdanshow8658

2 ай бұрын

I sleep on occasion

Favorite car cutlass I gotta build me another one I miss that car

The Covers are Tight💪🏾💯

Oh yeah, Great WORK.😊

Pretty sick man reds my favorite color as well. Had an cutlass a long time ago on wires no juice but i felt like i was king riding in it

This gives me lots of inspiration to when ever i get my car, im 15 nd im trynna get a 86 cutty. Good work on the build, its gonna help me a lot💯

@thecadillacdanshow8658

Жыл бұрын

Nice my first car was my oldsmobile 98 I drove it for a few months before juicing it I wouldnt really recommended having a lowrider for a daily drive but some how I did it. Knowing how to work on then yourself helps

Cutty Dan The Man!!!! Never that Always Cadillac!!!!

Donnie got a monster. 🥰 Awesome work, as usual bro.

@thecadillacdanshow8658

Жыл бұрын

Thanks

Clean clean clean work brother !!!!! Great video !!! Thanks again

@thecadillacdanshow8658

Жыл бұрын

Thank you

Sweet great set up

Car clean and the set up is clean. Great work

@thecadillacdanshow8658

Жыл бұрын

Thank you!

Great job! Looks clean!

@thecadillacdanshow8658

7 ай бұрын

Thanks!

Super clean work as usual Dan… 💯

@thecadillacdanshow8658

Жыл бұрын

Thank you!

Outstanding setup!!!

@thecadillacdanshow8658

Жыл бұрын

Thank you!

Good job that car looks super nice

@thecadillacdanshow8658

6 ай бұрын

Thank you!

Great job!!!

@thecadillacdanshow8658

10 ай бұрын

Thank you I am going to need to do a updated video on the car he has made a lot of improvements since it left

Maaaannnn that’s sweet! Well done sir!!

@thecadillacdanshow8658

Жыл бұрын

Thanks man it turned out sweet

This set up is clean

@thecadillacdanshow8658

Жыл бұрын

Thank you!

That's looking good.

@thecadillacdanshow8658

4 ай бұрын

Thanks

That setup looks dope homie

@thecadillacdanshow8658

Жыл бұрын

Thank you!

Llac man is killing it…..

@thecadillacdanshow8658

Жыл бұрын

Thank you! I try

Nice!!!

U did a good job

@thecadillacdanshow8658

6 ай бұрын

Thanks!

Beautiful work

@thecadillacdanshow8658

Жыл бұрын

Thank you!

Man that work look amazing.. do you work on subscribers cars ?

Dope Trunk

@thecadillacdanshow8658

Жыл бұрын

Thanks!

I would love to Have the knowledge to do this And admire your work ! Hopefully one day i could learn and educate myself Beautiful Car !!!

@thecadillacdanshow8658

8 ай бұрын

Thanks look through all the videos that's why I make them so people can learn feel free to ask questions there is a good chance I have a video that will answer any question you have if not i can probably make one

@juniorsolis5835

8 ай бұрын

@@thecadillacdanshow8658 thank you Sm for the reply ! I want my kids to grow up and learn about cars specially lowriders 🙏

Man I need this on my 92 caprice

@thecadillacdanshow8658

6 ай бұрын

It can be done!

@Booyow92

6 ай бұрын

Thank you for the inspiration man I can’t wait to 3 wheel motion in the caprice 🛞🛞🛞

Nice work 👌

@thecadillacdanshow8658

4 ай бұрын

Thanks!

What size rear cylinder requires adjustable arms? The arches were the only stress points done? Nice work

@thecadillacdanshow8658

Жыл бұрын

I did the rear arches inside and out, a bridge and the front spring pockets 12s and up I do adjustable arms above 12s I do drop mounts

Nice

Nice work, what size cylinders did you use in the rear, also do you have a pic of how you reinforced the front pockets?

@thecadillacdanshow8658

11 ай бұрын

This one had 12s in the rear I will be having a video on doing the spring pockets

Looks Real Good Brutha

@thecadillacdanshow8658

Жыл бұрын

Thank you

@migo831

Жыл бұрын

​@@thecadillacdanshow8658hey brotha. Gotta question. I tried finding that video you did on the trunk shocks on hulk. Do you still have that up?? Lmk appreciate ya.

@thecadillacdanshow8658

Жыл бұрын

Here you go kzread.info/dash/bejne/dK1kj6Ogn8zfYsY.html

Nice work man did U plate up the front arches and belly?

@thecadillacdanshow8658

10 ай бұрын

Not on this one I did do the spring pockets though

Hi Dan . Awesome work . By any chance do you do outside work ?

@thecadillacdanshow8658

Жыл бұрын

I do but I am booked up for the next few months

🔥🔥🔥

What’s up bro , quick question do you Recommend installing an inline fuse to your 24v wire?

@thecadillacdanshow8658

8 ай бұрын

100% do

So would you be able to give a wire diagram on how you did your batteries to pumps

Another awesome video Dan, super excited for you on building a new shop I recently did something similar and was able to save big $$$ by contacting my power company for old telephone poles they worked great for me, I like the trusses try rustoleum turbo cans to save time

@thecadillacdanshow8658

Жыл бұрын

Yeah I may have to see about some old power polls that's a good idea

@soulessm8015

10 ай бұрын

​@@thecadillacdanshow8658 Question. I have 2 stress cracks on each window side upper corner. On my cuttless. What should I do weld or just Bondo and touch up with paint? Thanks.👏🏼👍🏼🙏🏼

@thecadillacdanshow8658

10 ай бұрын

@soulessm8015 I would weld it for sure those are some heavy doors and they tend to do that after a while

@soulessm8015

10 ай бұрын

@@thecadillacdanshow8658 Another question.what about stress cracks.upper corner back near top of the car of the windows? Thanks. 👍🏼🙏🏼

@thecadillacdanshow8658

10 ай бұрын

Definitely have to weld those up is the car already juiced?

Why not black tractor paint for the trusses?

Bad ass work dan where are u located

@thecadillacdanshow8658

Жыл бұрын

Montgomery al

outstanding

@thecadillacdanshow8658

Жыл бұрын

Thank you!

Got all my fingers n my face 😂😅

What’d you use to clean up the cylinder holes in the trunk? One side is blown out in my trunk from 3 wheeling with no bridge 😖

@thecadillacdanshow8658

9 ай бұрын

I drilled a 4 inch hole in the sheet metal and used a tail light grommet for a semi I came across some that were solid and I cut a x in them so the cylinder could pass through unfortunately I dont remember where I got them because I was trying to get them again

Get that POR.. paint over rust, it's more durable that paint

@thecadillacdanshow8658

Жыл бұрын

Yeah I have used that and it is a amazing product just expensive

Ospho then paint

Whats up Dan? Love the Videos. Please tell me you are located in Georgia

@thecadillacdanshow8658

Жыл бұрын

I'm not far from it I'm in Montgomery

@ricardoguzman6097

Жыл бұрын

@thecadillacdanshow8658 Well I'm in Augusta Ga, I have a 92 Brougham I would like to get juiced. And there's no shops around here at all. Plus I like the fact it's just you working on the cars. I read you were booked for a few months. You don't see that around here and I would love to stand out.

@thecadillacdanshow8658

Жыл бұрын

Message me on Facebook we can see about getting a game plan going

Spray bedliner on the roof frames

@thecadillacdanshow8658

Жыл бұрын

Good idea!

@SOUTHSIDESUPERSTAR

Жыл бұрын

@@thecadillacdanshow8658 I do that to my trunk and floorboards

I got a question when welding the bridge did you just weld the bottom side of the bridge and not the top bcuz you could reach the top to weld. Also the guy who installed my switches cut the front spring while still compressed to release tension.

@thecadillacdanshow8658

Жыл бұрын

Yeah I just weld the bottom and add gussets to each side

@coolchucho271

Жыл бұрын

@thecadillacdanshow8658 thanks for the info my guy. I plan on putting a bridge on my cousins car and was wondering if welding one side on bcuz that's all I can get to would make me look bad. I watch all your vids and gonna build AArms and everything else the way you do it.

@thecadillacdanshow8658

Жыл бұрын

@@coolchucho271 the only time I weld both sides is when I fo a full frame I have never had one fail

@coolchucho271

Жыл бұрын

@@thecadillacdanshow8658 I see gotcha

When you put in the bridge you didn’t have to cut anything out of the way?

@thecadillacdanshow8658

6 ай бұрын

I cut the spring pockets out of the way

@natemurphy4367

6 ай бұрын

Ok

Hey I really like your video. How can I get in touch with you? I wanted to ask you some questions regarding what you did. It’s pretty cool that you have that Oldsmobile.

@thecadillacdanshow8658

4 ай бұрын

You can message me on here or on Facebook

@martincortez9131

4 ай бұрын

How much to do my 86 ?

@thecadillacdanshow8658

3 ай бұрын

@martincortez9131 it all depends on how far you want to go builds start at 6k and go up from there

What does that street charger do?

@thecadillacdanshow8658

17 күн бұрын

Charges you batterys while you drive

What would you charge to do one

@thecadillacdanshow8658

5 ай бұрын

Builds start at 6k and go up depending on what you all want done

How much would u charge to do my 84 Cutlass supreme

@thecadillacdanshow8658

6 ай бұрын

It all depends on what you all want done a basic lay and play setup starts at 7k

@ymcmb8338

6 ай бұрын

@@thecadillacdanshow8658 I have a red set up fbss double pump 2 pump just need batteries and battery rack dough nut cups and spings I like your set up with the Cutlass emblem thats hard I'm in Augusta ga what's my price for installation

@thecadillacdanshow8658

6 ай бұрын

Message me on Facebook and we can get a quote up

Are you for hire?

@thecadillacdanshow8658

Жыл бұрын

I am but I am booked up for the next few months

@tmac3548

Жыл бұрын

@The Cadillac Dan Show no problem I can wait. What's your contact info

@thecadillacdanshow8658

Жыл бұрын

Message me on Facebook

I’m building my 88 euro nose cutlass as we speak. Frame off. Are you not in Ohio ?

@thecadillacdanshow8658

Жыл бұрын

I'm in Alabama

@hosscaddy

Жыл бұрын

@@thecadillacdanshow8658 oh man sorry not sure why I thought you was in Ohio. I’m in Ohio.

@hosscaddy

Жыл бұрын

@@thecadillacdanshow8658 in your opinion if I’m not hopping or 3 wheeling do I need to bother reinforcing the frame?

@thecadillacdanshow8658

Жыл бұрын

@@hosscaddy I would at least do the rear arches as a very minimal you are adding alot more weight then the frame was designed to hold think of holding a brick in your hand with your arm extended all the way out eventually it's going to get tired and drop

@thecadillacdanshow8658

Жыл бұрын

@@hosscaddy if you need some work done you can get up with maximino de Leon he is in Ohio. If you havnt already check out the channel gem city welding billy is also in Ohio

You seem to care about your work. That matters that it just not another job.

@thecadillacdanshow8658

Жыл бұрын

Yeah I want every set up to stand out. It's a terrible business move but for now I basically build cars for fun. I dont enjoy doing basic setups but I do need to get in the mindset of that's only what most people want to pay for. I have just been lucky to get cool customers that are open to adding changes

@R.J.1

Жыл бұрын

@@thecadillacdanshow8658 I wouldn't say it's a terrible business model, it's indeed what will keep you in business. If it's still fun for you to do, then you're on the right track. I've had a 83 coupe and a 90'd out 84 sedan on juice, just hard to find for a good deal now days. The ones I do find are too pretty to cut up. Nice work tho man, take care.

DIE GRIND SPRING IN PLACE EASY

Your face is a unique setup. Giggity.

@thecadillacdanshow8658

2 ай бұрын

Is that a good thing or bad thing

@cadillaccrysto

2 ай бұрын

@@thecadillacdanshow8658 goood

Hate to see an older car get trashed in the name of bouncing a car to death

@thecadillacdanshow8658

Жыл бұрын

I didnt remember you being the owner of the car

Do you do work on other people's lowrider I need one did the same type setup let me know payment on deck

@thecadillacdanshow8658

Жыл бұрын

I do I am booked up for a few months right now when are you looking to build something

@terrencesmith3574

Жыл бұрын

@@thecadillacdanshow8658 this fall I'm trying to buy a 83 Buick regal limited

@thecadillacdanshow8658

Жыл бұрын

@@terrencesmith3574 let me know I get you in line hit me up on Facebook messager

I need to make a bridge 😔 got any tips man? Im in Aus 🦘

@thecadillacdanshow8658

4 ай бұрын

I use 8 inch c channel but there are many ways of building bridges I have seen them out square tube and flat bar