fun tip: do not put ferric chloride in aluminum containers. it will begin to boil and melt your aluminum container instantly. glass or plastic yall.

@amonGustavo07

4 жыл бұрын

Bruh who would put a chemical that’s made to dissolve aluminum in aluminum

@sam-sw8zw

4 жыл бұрын

@@amonGustavo07 me. I'm that guy

@randyflores2933

4 жыл бұрын

@@amonGustavo07 you'd be surprised, there's too many dummies in the world haha

@Zondidjejsj

4 жыл бұрын

I know that from breaking bad

The lords work sir! The lords work!

Alright, Congrats on 100,000 Subscribers. Now let’s see some ads on these videos!!!

@JeremySiers

5 жыл бұрын

Thanks! 😊

Thank you very much for the instructions! I tried this today on my Tenacious. I used pure Ferrochlorid for 15 minutes and produced the stonewashed effect in a plastic container with rocks I collected on my tours in the woods. I used WD40 as a liquid and shook it by hand for 5 minutes. The blade could be a little bit darker in my opinion but the stonewashed effect turned out pretty nice. I put Flytanium Ti scales and a black deep carry pocket clip in titanium on it. Finally I sharpened it with the Spyderco sharpmaker - I liked it already before in its original state but now it looks absolutely badass. Best regards from the Black Forest / South Germany!

Man I love this channel. The editing is great, the camera work is amazing, and the content is out of this world. Congrats on 100k man!

@JeremySiers

5 жыл бұрын

Thanks 😊

Man we need more people like you. You tell us what we need to know with no messing about. And you're hilarious! Keep it up mate 👍

This is badass, im starting to really get into EDC stuff, love it.

Saw this video and pulled the trigger - UPS left today and I stonewashed my "brand new" Gray FreeTiger FT903 afterwards ... It's even more of a beauty now👍🏼 I just subscribed to your channel!!

Just finished stone washing my Ontario Rat 1, looks great! Also Rit Dyed the scales black. Thanks for the info!

Came across this video in my edc youtube hole...fine job sir. Really enjoyed your simple presentation. No need to be overly scientific, just fun.

Well I'm definitely going to do that now. Looks awesome.

Can you do a review of that knife sharpener? A how to?

@natelund2914

4 жыл бұрын

What sharpener is it?

@northseamuppet_5129

4 жыл бұрын

@@natelund2914 Looks like the EdgePro Apex, good system more flexibility for angles, thin blades etc than others I've tried. I use water stones on my camp knives but for day to day the EdgePro is pretty foolproof

@Fender66ch

4 жыл бұрын

+10 for this suggestion.

I love blackwashed blades and this one turned out great 👍

Dude that's the most awesome tutorial here in youtube! Ever!

Came across this looking to customize my edc but I’m staying cuz you’re funny as hell

It just looks dope... The best reason to do almost anything

Acid etch is definitely my favourite finish on blades, especially when you put a mirror finish edge on them it just makes it pop

Probably the nicest tenacious I’ve ever seen. Awesome vid man. 👍🏼

@JeremySiers

4 жыл бұрын

Thanks Mike 👍🏻

Love it! I'm gonna try it!

It turn out cool looking and those scales are nice also.

Awesome video! Thanks for making this available. I’m definitely going to have to try this. I love how you explain that it doesn’t have to be an overly complicated or expensive project. Just subscribed too.

That was pretty cool. Thanks for the knife finishing lesson!

Try putting pennies it there for a copper wash it looks cool on a black blade

@winchesterinc.5643

4 жыл бұрын

ORGANDONOR Explain please 🤔

@vibeczech285

4 жыл бұрын

Winchester INC. if you add copper to your acid wash the copper will bind to your blade giving it a copper coat. You might want to look into it a bit more as it does have a slightly different process to normal acid washing

@murrayannandale

4 жыл бұрын

I did that. Even put a shit ton of copper in. Keeps rubbing straight off

@vibeczech285

4 жыл бұрын

Laeveld Paraatheid are you using pennies or actual copper. If your just using pennies it’s gonna take a lot of pennies and a lot of time...

@effyou128

4 жыл бұрын

Pennies are not copper anymore haven't been for a while!

Like the humor, thanks for the great info.

Just started watching love it. You hit all the good stuff out the park

that came out extremely good!

Love your videos man, great quality.

first video I've seen of yours and I instantly subscribed. Great video. Love how you give diy as well as money bought tips. Good to have both as I'm just starting out restoring blades and hopefully eventually forging my own. I actually have a knife I think this would look awesome on so thanks.

Just found your Chanel and boy am I glad.. great content can't wait to pimp out my knife collection .. hope to see more knife videos with my subscription

I've got citric acid it works well; I just leave the piece soaking over night to get a deep charcoal grey finish.

Thank you so much. I have wanted to do this for years. I’m gonna now lol

Love it! Keep it rolling

i’ve never watched one video of someone’s and subscribed, until now!😂 i loved the whole thing!

Thanks! Great info and walkthrough.

Dude! I love it, I learned so much! Keep it up. Hey do an EDC episode.

Wow. Very nice. That's what I should do to my knives.

I just got a Tenacious so now that I see this, I'm even more excited brother!

Awesome video dude. Great job.

Immediately like this guy. Lol thanks for the good info sir, and thank you for your service.

Now this is quality content Instantly subbed

Dude, Nice Quality! It's crazy how lucky I've been on finding good channels. Keep up the good production work! And kudos to you for all the neat work you've been doing so far!

@JeremySiers

4 жыл бұрын

Thanks 👍🏻

Thanks for the tutorial man !!!

Cool! I always wanted to make knifes. I was curious on how to get those finishes.

The song when he puts the knife back together: My Great Undoing · Of Men And Wolves ... you can thank me later... BTW Great build man! Did on my Persistence and looking forward to build a Tenacious!

That was awesome, definitely going to try this out!

@JeremySiers

5 жыл бұрын

Give it a go man, super easy. 👍🏻

Alright alright, thanks for the lesson. Heading to garage now, 106 degrees right now in Laredo, Tx.

Man I love this channel!

Just discovered this channel, I love the content and it's cool to see a content creator in the Jacksonville area

Absolutely an amazing video. It’s criminal he doesn’t have more subs

First time watching and i love it already

I like the look and looks very doable, thanks!

First video I've run across. Subscribed!

Thanks for the video. Can’t wait to try it to one of my knives that needs a facelift.

Always great content, and the production (video editing, music, etc) is 1st class. All that and you have a beautiful home- I really dig your style! If there's one thing I look forward to each week, it's something from you. And if there's nothing new, well, I replay one of the previous ones.

@JeremySiers

4 жыл бұрын

Should have a late man shit Monday coming out tomorrow. 👍🏻

That is really cool looking.

Awesome knife, amazing man! nice.

Looks good, thanks for the info.

This guy cracks me up. Great content

@JeremySiers

5 жыл бұрын

Thanks brother!

Thanks for no overcomplicaing things. For those of us without decent knife sharpening skills/equipment, do you reckon nail polsih on the blade edge would work too?

Cool tutorial. This is also a great treatment for a knife that has a lot of scratches already from hard use or even for buying a used knife for a great price and refinishing it. I like the scales you have also on Your tenacious. Are they aluminum? It look much better now with the mods than the stock look. Thanks for the vid.

Very cool, brotha. Digging your content. Wishing you all the best in the future!

Holy crap your in st. Augustine lol I just left there Sunday. Funny KZread made me stumble on your channel!

Great vid! Would like to see your knife and watch collection.

Great tips, thanks a lot 🤘

Great outcome..... Love Spyderco blades. Subbed

Sweet! Thanks for sharing

Can you do a review on the Edge Pro Knife system. Been thinking about purchasing one. Would love to know your thoughts on it.

Hello, great and funny video. Thanks a lot for your amazing instructions 👍

first video of yours ive seen and its a great video. i might have to try this with one of my knives. Subscribing now

Thank you. Great vid.

Rockin that beard brother...beard brothers unite...great video

Awesome content, thanks!

Thoughts on using a spray bottle that does a very fine mist with the Ferric Chloride? I'm curious to what effect/look you would achieve.

Knice vid bro. I sharpen knives for a living, so hats off to you. Spydies are a great blade as well. Also like Chris Reeves Sebenza 21s and any plunger locks. Cheers

BOOM!!! 100,000 . . . . . . CONGRATS, BROTHER!!!

@JeremySiers

5 жыл бұрын

Thanks 😊

Hello, I'm new to the carbon steel game. I recently got into throwing knives and I am currently tired of cleaning/oiling after every use. I'm considering a "forced" patina but as I research I'm seeing the Acid Etch/Stone Wash style and it looks amazing. How is the durability/resilience of the finish? With the throwing knives they are constantly colliding with each other, if I choose to do an Acid Etch will it require a refinish after a short while?

Neat stuff and neat vid!

Well done!!!

Nice job. You're pretty funny while giving great instructions. Hope you're still enjoying life. Hope your neighbor is well also.😆 Going to do this to some knives now. Be blessed, Leo 🦁 from San Diego ✌️.

*I like your videos bro... I especially liked the "clear ice" video. :)* *anyway, just stopped by to say hi*

I spotted that deck of monarch cards. Great video

Excelent vid, Jeremy. Can't wait to get started on this. I do want to wait till it's about 100 here in Tampa.

I'm not even into knives like that but I enjoy your content so much!

@JeremySiers

5 жыл бұрын

😊

Love the Monarch cards in the thumbnail. Theory11 has tons of awesome cards in addition yo those! I'm ad sure you're aware.

You totally looked like the fisherman on Gorton’s seafood logo haha! Yea I’d like to know what sharpening process you used as well! Thanks again for the bad ass episode!

Love the Molon Labe flag! We use to chant this with all football teams I coached!

great video my guy. just did this to my benchmade two weeks ago

@JeremySiers

5 жыл бұрын

One of my favorite customizations! Looks great! Love me some Benchmade by the way 👍🏻

I just stumbled accrosed this video and was not disappointed

I might do this on my UK legal 2.5 inch unlockable Swiss Army Knife blade 😐.

@JeremySiers

5 жыл бұрын

Oh yeah, I’ve seen guys take apart their SA’s and do the whole tool set. Looks awesome! 😂

@jeddy_bravo

3 жыл бұрын

Oof..... I wish I couldn't say relatable

Fanatic tutorial and congrats on 100k!

@JeremySiers

5 жыл бұрын

Thanks 😊

Awesome dude

Very cool buddy looks amazing, got an idea when it’s done I’ll share it with you see what you think

Thanks for the video. I just got an M4 Tenacious to acid etch. Also got some copper scales Im going to shipwreck for it. Im gonna look into that tumbler and media from Harbor Freight.

Sweet one I might try here up the road in Charleston

CONGRATS ON 100k!!

@JeremySiers

5 жыл бұрын

Thanks! 😊

awesome vid, I like your style. subbed

I definitely drive my wife crazy sitting, watching TV, and Civivi flipping.

@motorcyclemark2889

3 жыл бұрын

That's me she's always telling me to stop but I cannot civivi spyderco kershaw all are loud my elementum is probably the quietest

Fellow magician? Loving those monarchs

"My neighbour decided to do his lawn", exactly when you need a knife!

Man Shit Monday.. released on Monday. Wow dude, you feelin' ok?

@JeremySiers

5 жыл бұрын

😂 I totally earned that 😂🤣