*OTC (3050E Noid Lite/IAC Test Kit: amzn.to/2ID8aKt *Spark Tester: amzn.to/2ID9nBv

@bill3641

5 жыл бұрын

Helping a buddy "fix" an off idle stumble on his dad"s car ( we were 16). Had the top off the carb and hit the throttle. When we were done "fixing it" we started it and right away we could hear the accelerator pump checkball bouncing between the top of the piston and the head. His dad talked us through the r+r of a cylinder head on a 57 Ford 292. Found the ball, put it back together and it ran fine. His dad never mentioned it again. Nice guy.

@lewisautomotive9853

5 жыл бұрын

Eric ...you don't get off that easy .... give us the follow up drama ! . ;-) .

@pgtmr2713

5 жыл бұрын

I had a bad distributor AFTER the first start on a swap. It ran then it stopped. It had spark, just weak spark, and i had 2 other bad distributors of the same type. I finally modified to try a different year distributor. Then it finally started and I made final adjustments, ran great for a year and a half til the distributor went again, but it ran... so I was checking other things for awhile. At least the newer disty was repairable and cheaper.

@brandone6252

5 жыл бұрын

Matco spark tester way better touch it to wire or coil an crank look for spark

@ekop1778

5 жыл бұрын

WHAT WAS IT? SPARK PLUG?>]

Mrs. O tooting your horn was hilarious, thanks for not editing that out 😁

@SouthMainAuto

5 жыл бұрын

Haha I can send her to your shop Homie!

@1tobicat

5 жыл бұрын

I have found that sneaking up behind someone and blasting them with the compressed air blow nozzle works pretty good for payback. It would even be better if it was videoed.

@HomieHektor

5 жыл бұрын

South Main Auto Repair send her over, let’s see what she can do with the Cheeta Bead Sealer 💨

@corvettebob96

5 жыл бұрын

My dad always said that is why mechanics are bald. From hitting head when the horn gets honked. Kudos to Eric, He took it in stride. I would have flipped out for a few seconds.... Got to a point that I would disconnect horn if my younger sisters were helping me.

@dtgoodwin

5 жыл бұрын

That was awesome! I jumped as well.

If that's all the DIYer forgot, he deserves a beer

@timhartherz5652

3 жыл бұрын

Imagine rebuilding an Engine from scratch. Hundreds of Parts assembled in the correct Order and Way, just to miss a few tiny Contactsprings on one of the very last Parts. This is so dump it's hard to believe. I would pass it off as an honesty check, to save myself the embarrassment.

@brettfrancis1527

3 жыл бұрын

No he's a fucking moron

@dukeman7595

3 жыл бұрын

@@brettfrancis1527 No you are. I'm sure you couldn't build nothing but a big angry mouth. Stop being a negative person, the man deserves a lot of credit for re=building his own engine, not many could!

@snoopunit

3 жыл бұрын

He deserves a case, lol. Why the coil pack didn't come pre-assembled is beyond me. Never purchased coils that weren't ready to go.

@squatchhammer7215

3 жыл бұрын

@@snoopunit watch as it was a bad batch that snuck through. Just saw the rest. At least it was a simple mistake.

I literally laughed out loud when Mrs. O. honked the horn to mess with you and made you jump!

@eddiebear8370

2 жыл бұрын

Me too. Lol

@johno9163

Жыл бұрын

@@eddiebear8370 And me as well!

@adamdalejohnson

Жыл бұрын

😅😂I did too!!

@mattwigren4044

Жыл бұрын

The honk made me jump😂

@richardlewis4288

Жыл бұрын

Me too lol

The horn honk was freaking perfect. Well done.

@bombardier3qtrlbpsi

3 жыл бұрын

Exactly I would like a live replay 🤣🤣

@gregferguson2398

2 жыл бұрын

Hopefully you didn't charge him for that lol

My first over haul was a 1966 Buick skylark. The car would studder, go blam blam pop pop. After three days pulling my hair out I called a moble mechanic and he came out to look it over. Did a double take when he saw me. Asked how old I was, told him I was thirteen and this was my first car. He thought my Dad helped me and nope he didn't, did it with a Chilton Manual in one hand and a wrench in the other. He looked over the engine and found out the timing was a 180 deg off. Reset and the car started and ran great. He didn't charge me and handed me a card and said if my parents said it was OK I can learn from him on weekends and Summer as long as I keep my grades up. Spent several weekend and Summer's riding and working with him. Learned a lot about gas and diesel car's and trucks. He was a great guy. Passed away a year after high school graduation.

@chicanesimon

5 жыл бұрын

Thats a lovely memory

@kevinritchie9227

5 жыл бұрын

There are not many people like that anymore. You were very lucky to have someone like him. Sorry to hear he passed.

@TheWaterman1000

5 жыл бұрын

@@kevinritchie9227 your right. This country need more men like him. That guy encouraged and sparked the inner me to learn and to have the courage to try new things, not just in the auto/truck industry but others things in life. If you could take just one boy or girl (I have daughter's) and just give them the time of day a word of encouragement or teach them i feel we can help build a better country. But sadly to say in this highly toxic environment created against men now days would you take the chance and liability to even try? If you do be very careful. Look at the crap that went down for the Scotus nomination. And please everyone go and Vote...

@carloselrey36

5 жыл бұрын

@@TheWaterman1000 What's sad is that today that certainly wouldn't happen..parents would not leave you alone with any older man let alone hangout and go places.

@lrbenzi

5 жыл бұрын

Thanks for sharing!

He was 99.5% there. That guy is still lucky to have found you. This would be a dream rippoff for an dishonest shop. Blinkerfluid, lol!

@spankthemonkey3437

4 жыл бұрын

4jrgolf I get mine change every year

@binzsta86

4 жыл бұрын

I got charged $50 for change my blinker fluid once.

@tysimon

4 жыл бұрын

Blinker fluid is gonna be very expensive sometimes, depending on clarity ;)

@4jrgolf

4 жыл бұрын

@@tysimon just stick with full synthetic Blinker Fluid!

@ThatGuy-nv5kz

4 жыл бұрын

I use synthetic blinker fluid, it's expensive so I rarely use the blinkers.

Back in the day I was an automotive machinist. Every so often I would have a proud father show up with an engine to rebuild for his kid's car. This time it was a customer with a 396 for his kid's Chevelle. He wanted the engine bored, balanced and blue printed, and ported heads. I was well into the build when the customer came into the shop and said he wanted to "save" money so he and his kid would have a memory of putting the engine together themselves. I told the customer that I was not happy with that request, mainly because my name was on that engine. The customer finally agreed to let me short block it, but he would do the rest with his kid. A week later, I got a call at about 2:30 in the morning. The customer was yelling at me from the get-go. "This GD engine doesn't have any oil pressure!!!!!". "What the hell did you do or not do!!!!" I stopped at the shop and picked up my drill and pump priming rod and went to the gas station the customer was using to test run the engine in the kid's Chevelle. I saw they had the valve covers off and the top of the heads were dry as a bone in the desert. So I pulled the distributor and put light in the hole and I could see all the way to the top of the oil pump. I asked the customer where he assembled the engine and he told me his garage. I told him the oil pump shaft between the distributor and the oil pump was missing. He told me I must have forgotten to give it to him at my shop. I told him we were going to his garage. In the middle of the garage floor was the box I had given him at my shop. I walked over, looked in the box and there in all its singular glory was the shaft. I didn't say anything to him, just picked up the shaft and went back the the station. I primed the engine oiling system, put the shaft in and put the distributor back and told him to start it. I was younger then and a bit pissed-off, so I stepped back while the crowed gathered around the engine bay. The customer had a remote start and cranked the engine. The engine instantly fired, and all those gathered around the engine..... , well let's just say they received a break in oil baptism. There was oil everywhere. I guess I should have told them to put the valve covers on, but hey, short block it was. I walked out and went home to bed with the biggest smile of my lifetime.

@nakedzebra67

3 жыл бұрын

I was a bit younger when remote start was popular too lol

@davecrupel2817

3 жыл бұрын

What an idiot 😂 never try to save money when it comes to engines.

@Ethan-ph3nf

3 жыл бұрын

My dad did the same thing. Knew a guy that did rebuilds all the time for reasonable rates, and my dad took it to a different shop at the last minute that charged more and left the thing completely disassembled and expected me to put it together between my job and school lol.

@andygilbert1877

3 жыл бұрын

Nice one, that made me laugh! 🤣🤣🤣

@cruz1816

3 жыл бұрын

One of the best stories I've heard

I spent four months on my first engine build. I did everything myself. I spent time polishing everything inside and out, I cleaned and painted every bolt, I hand made gaskets and adapter plates, I meticulously lubed and aligned, I tested each and every part and all systems from oil to fuel to coolant, I simulated temperature to be absolutely positive the fans would come on (electric fans were new back then), I checked and rechecked the timing to be sure it was perfect. I tried to start it and got nothing. I somehow didn't have any spark. I checked the coil and the plugs and every wire individually, I pulled the cap and checked it for cracks. Still no spark. I went over it all day and all night before I realized that I was an idiot. I got mad and slammed the hood..... And there it was...... The rotor was sitting on the windshield wiper. That's the stupidest I've ever felt in my life.

@bobhudson6659

2 жыл бұрын

Sorry. I had to laugh. But be grateful. If that is the "dumbest" thing you do in your life, you are doing well. I am now a retired mechanic in Land Down Under and still help people in need. Wish what you did was the "dumbest" thing in my life. If the Good Lord leaves me alive on this Earth past my current 70 years, I am sure I will have more tales to tell others when I missed something staring me in the face.

@thedevilinthecircuit1414

Жыл бұрын

We've all made that mistake. I've done it more than once!

@sanitary103

Жыл бұрын

Sometimes the obvious things get overlooked b/c you’re so focused on the meticulous things. Happens to many.

@942doc1

11 ай бұрын

Wat rotor?!?

Thumbs up just for the horn honk while you're in the engine compartment.

@josepeixoto3384

4 жыл бұрын

Thumbs down!!! I would be royally pissed!!!

@nosuchluck9477

4 жыл бұрын

The Underhood Horn Honk is a classic move! Never gets old! Except for the poor fellow under the hood, that is! 😂😂

@muskokamike127

4 жыл бұрын

@@nosuchluck9477 you gotta do it....it's mandatory. lol

@OffGridInvestor

4 жыл бұрын

I remember my boss connected jumper leads to a car and just as he put the second one on his cell phone went rang and he jumped back.... "these farkan phones"

@kennethmc2601

4 жыл бұрын

You know thats not the first time she has done that!

$1 to hit it with a hammer. $299 to know where to hit it.

@S8_10

5 жыл бұрын

I tell people that all the time. I don't charge you to turn a wrench, any idiot can do that, I charge you because I know which wrench to turn.

@madjeepernh6834

5 жыл бұрын

That's great! Never heard it.

@madjeepernh6834

5 жыл бұрын

@@S8_10 That one's great also!

@yamahonkawazuki

5 жыл бұрын

Yea the percussive maintenance charge

@paulmiller3565

5 жыл бұрын

Actually did that with a buddies car, 6o's something Chevelle, wouldnt turn over so I crawled under and hit the starter with a hammer and it cranked

You are what we need in America, honesty and integrity and I want to say Thank you! 👍👍

It is refreshing to see someone who is honest and displays integrity. I wish I lived closer to your shop as you would be my go to mechanic.

Bro I'm a mechanic myself... I work for myself as well... I was trying to acquire the repair contract for fleet vehicles for a local Transport company... They sent me a vehicle to fix for them it had the same thing missing...the coil springs... They were testing my honesty... When I called them and let them know it was less than a $50 fix I got the contract LOL... Honesty pays

@jlozano180

3 жыл бұрын

Wow

He took the springs out and it wouldn't start so he rebuilt the motor.

@jc-xo8yd

4 жыл бұрын

lolol

@1936Glen

4 жыл бұрын

My buddy works at a shop that just replaced an engine over a cracked distributor cap. Lol, whoops!

@scientist100

3 жыл бұрын

@@1936Glen can a weak distributor cap be visible using an oscilloscope? I saw spark and such but it was still bad lol, no cracks in my case but it was dirty but was still working ok. I wish I did a capture of a weak spark going through the coil wires to compare with a good one.

@1936Glen

3 жыл бұрын

Maybe? Lol. Using an oscilloscope for such things is above my pay grade!

@gillgetter3004

3 жыл бұрын

@@scientist100 look at engine run at night you will sparks moving on outside of cap

Love the comments, I was especially impressed by how sensitive you were to the owner missing first start....very refreshing! Thank you for recording this.

@projectponderer

2 жыл бұрын

Exactly! ⬆️

@donaldolson8962

2 жыл бұрын

Score 1 for Mrs o, great honk.

My first clutch! I was 16 and had no idea what a alignment spline was. Man! Three very frustrating days of holding a tranny up and cussing. Thankfully, the corner gas station mechanic enlightened me? Thank you Jim!

Those fun little moments like at 6:00 are gold.

@dashcamandy2242

5 жыл бұрын

I did not expect to see you here. Small KZread, eh? LOL

@bigclivedotcom

5 жыл бұрын

@@dashcamandy2242 Garage/workshop videos seem to be mostly what I watch.

@Folsomdsf2

5 жыл бұрын

This and seeing electronics that are very close to blowing up in a stiff breeze.

@pospc2

5 жыл бұрын

Suprised to see you here! I like seeing that one of my favorite KZreadrs has similar taste in content. I like your electrical videos and I was raised by a mechanic and have taken to mechanical work myself now. In my spare time I like to mess around with little electric gadgets,amp/tv repair and little diy projects.not to mention it helps with the automobiles to have electronic knowledge.

@ayitsyaboi

5 жыл бұрын

I swear you're subbed to all of my subs. Glad to see you around.

Honestly. If I had a dollar for every time I did a job, turned the key, and remembered oh yeah that battery thing is kinda important, I would be rich.

@colecooper5836

4 жыл бұрын

I just finished an engine swap on my bmw yesterday..took like 4 months. Put the finishing touches on it and turned the key... battery dead... it was dead when I parked it... forgot to charge the battery for 4 months. Lol

@acoow

4 жыл бұрын

But you already got MORE than a dollar every time you did a job.

@nathanmcphee620

4 жыл бұрын

Every single electrical install I've ever done, think to myself "Yea I'll wire it all up but leave the fuse until last" then forget the fuse, every single time

@BenPulido

4 жыл бұрын

Yup!

“Don’t you touch that button” .....”honk” Made me laugh pretty hard. Got a sub from me man haha.

I laughed so hard when his wife honked the horn, and him jumping was the “money light “😂

That poor guy! My dumbest mistake like this was doing a fuel pump on an 89 ramcharger. The massive 36 gallon gas tank was completely full and I to siphon as much as I could, remove the skid plate, rip my hand apart disconnecting lines before I could drop the tank. Major pain in the ass job getting that damn tank out. Upon re-installing the tank I realized there was a fuel pump access hatch in the floor....

@lala123abc

5 жыл бұрын

I have a beautiful 89 ramcharger as well!

@ThorOtheBIG

5 жыл бұрын

As a young mechanic, I double threaded an oil filter on my '91 MR2 2.2L. Couldn't figure out why it was knocking. Blew up... Found out later. Now, I triple check that my filters spin on freely all the way to the lip.

@TheKnightDrag0n

5 жыл бұрын

A mechanic told me tank had to be talken down to replace the fuel pump, appently he didn't know there is an access hatch under the seat in the 98 pathfinder, pretty convinient.

@jonathanpalmer228

5 жыл бұрын

@@TheKnightDrag0n I own a 94 pathfinder and yeah it's pretty lovely not to drop the tank. But honestly it's pretty easy tho. Like 10 bolts and 30 mins.

@chuckgates1171

5 жыл бұрын

Live and learn

sometimes you just need a fresh set of eyes :)

@bluesclues3428

3 жыл бұрын

Some times ur a dumb ass

@tyree9055

3 жыл бұрын

Gotta love when you forget to do something... 🤣👍

@penguin12902

3 жыл бұрын

As a network engineer this is super true. You look at the same thing so many times you're sure you checked it...go to sleep, wake up the next day look at it and say "doh!" that was it?

@TrojanLube69

3 жыл бұрын

@@bluesclues3428 like your grammar.

How did the customer react when you told him the news? This is like running a marathon and forgetting to run the last ten feet.

I know this is several years old, but it is my all time favorite video from Eric and Venessa. Please know that I smile every time I watch. Thank you.

Mrs. O and the horn nearly knocked me off my chair laughing. That was GREAT! She's pretty quick thinking!

@FortyTwoAnswerToEverything

5 жыл бұрын

Such a good dynamic between them. Gotta love that small town living. It's a laid back life style compared to being big city, lifeless corporate drones.

@edwardmartinez199

5 жыл бұрын

Ha ha Mrs O is funny. Also much prettier than Eric.

@JOHNBEA

5 жыл бұрын

Mrs. O is hilarious and attractive as well

Honking the horn when your husband has the coil in his hand pure gangster laughed my ass off well done Mrs. O.

@edwardmartinez199

5 жыл бұрын

Yes Mrs O got off a good one.

@Graham_Langley

5 жыл бұрын

Even more fun back in the old days before fully insulated connectors if husband had their hand on the horn terminal.

@fuckjewtube69

5 жыл бұрын

What would happen if you had your hand on the horn "terminal" Is it not 12v?

@ethanpoole3443

5 жыл бұрын

rsx123 The horn is an inductive system with connections getting made and broken quickly, which can generate high voltage back-EMF (that said, there are several ways to make a horn, some of which are worse than others - the greatest spike will be developed when the horn relay reopens to turn off the horn as then there is no return path to the battery that would have otherwise helped to absorb the surge. Nowadays you would either use a reverse biased diode or a capacitor across the terminals to absorb the back-EMF spikes and thus clamp the high voltage spikes as such spikes in the electrical system are not good for all the sensitive electronics in a modern vehicle (nor for radio reception).

@Graham_Langley

5 жыл бұрын

+rsx123 Ethan Poole has it correct in his reply. First time I remember seeing this was when my father hit the bonnet so hard with his head it dislodged the stay.

He's going to be thrilled it was something simple instead of something he screwed up. Having trouble with my fresh rebuild.

@AW-zy1kw

3 жыл бұрын

@Joeys Tomatoe Mine was something simple too. Had the distributor off by a couple of teeth. Runs like a top now.

My first rebuild was a 69 Plymouth fury hardtop with a 318. Took me two days to figure out that the distributor turns counter clockwise. When I finally got it right it was the best feeling in the world. I remember it barking to life, the hair on my arms stood up. I finally had a V8. There's just nothing better to a 17 year old kid.

This is a bit long. I was working as a tech in a Cadilliac dealer and had a complaint that a/c did not cool with radio on. Went on a road test and sure enough if you turned on the radio the a/c stopped cooling. fan still worked but warm air. Back in the stall, I had key on engine off and when I turned off the radio I heard the A/C chitch engage. Wow! After following all the wiring, I pulled the Wiring harness from the plug that went into the vehicle. Looking inside the male plug, I saw one of the spades missed it's mark into the plug and the spade bent to the side shorting against the neighbor spade. The bent one was compressor coil wire and the other one it was touching was "antenna down" so it only sent power to the a/c when calling the antenna to go down. This was a "brand new" car built from the factory with this error. Thought you would enjoy this.

@jefflittle4013

5 жыл бұрын

It would have really freaked you out if you put a cd in and the AC turns on.

@Gauge167

5 жыл бұрын

This is actual trouble shooting. Unlike Chris fix it

@Anonymous-it5jw

5 жыл бұрын

About 25 or 30 years ago, I bought a brand-new, steel gray Mercury Grand Marquis with air suspension. It rode a little low, and wasn’t that smooth a ride, but no tickets due to its appearance. I asked the dealer to check it out. When I went to pick it up, he told me the factory had forgotten to install the compressor, air hoses and air bags, and nobody had noticed. They put the air suspension in. How could the factory and dealership not notice? How did I not notice when I was test driving it? Why did I get rid of a car that no one ever got a ticket in?

@nategrube352

5 жыл бұрын

@Ron Rhoades newer caddys have them underneath the back seat, under the hood, 2 under the dash and one in the trunk depending on the model. Same with the battery its either under hood. Under back seat, or hidden in the trunk on pass side behind a carpet panel.

@jeffreysantos9070

3 жыл бұрын

@Ron Rhoades ALL CAPS !!!! WTF!!!!!!!!

Many years ago I swapped a 350 out of a wrecked '78 Nova into a '79 Malibu. The Malibu came to me with a 267 V8 in it, wasn't running very well, knocking and overheating. My friend and I did the engine swap, got everything back together, and the engine fired up and ran great first go. However, it kept tearing apart the alternator belt. I must have replaced that belt 5 times. I took the alternator off at least 4 times, tore it apart, examined the pulley in great detail looking for any bending, or sharp bits, or roughness in the surface. I examined the belt path looking for any kind of miss alignment. I spun the center shaft probably hundreds of times feeling for any king of binding. For the life of me, I couldn't figure out why the thing was eating belts. I was probably 3 weeks into this fiasco, and pretty much at the end of my rope when my wife (then girlfriend) pointed at the front of the engine, and said "is that supposed to look like that." So, it turns out that while putting things together, we managed to use the crank pulley off one of the engines, with the water pump pulley off the other. One of them had a smaller diameter groove for the outer belt, which was the alternator, while the other pulley had all three grooves at the same diameter, so the two pulleys were trying to pull the alternator belt at two different speeds, literally tearing it apart. Not bad, it only took 6 belts, 3 weeks, and my wife to figure out what the heck the problem was.

@kainhall

5 жыл бұрын

i remember being like 6 or 7 years old...... watching my dad try to get his 72 Plymouth satellite running i kept saying "dad, its the coil!!!" "no it isnt..... your just a dumb kid" (and he was being sarcastic..... he knew i was a smart kid... and i had/have the grades to prove it) so after like 3 hours of checking everything else..... he puts on a new coil crank crank VA-ROOM!!!! and thats how i became a mechanic...... watching/helping my dad he can set dual point distributors by feel..... but i can figure out computer/sensor problems with out a scan tool (went to college for computer science....but was a HUGE nerd before that) together..... not much we cant fix -------------------------------------------------------------------------------------------------------------- now days we dont even have to say a word to each-other.... i remember working on a car..... and getting done with my side of the engine right as heh got done with his with out a word..... we both switches sides at the same time didnt bump into each other.... or anything was like reading each others minds idk.... hard to describe..... but holy fuck it felt good

@JUST_ONE_ID10T

5 жыл бұрын

@@kainhall I remember working on a car with my dad and he was fighting with one of the springs and retainer clips for rear drum breaks. I was there looking at it and the way he was trying to do it I wouldn't do it that way. I tried to say something and he started yelling at me so I kept quiet. I waited until he went in the house about an hour later and lots of swearing. He came back out in 10 minutes and i had the spring on and the rest of it together. He looked it over and didn't say much about it but put the drum back over it. when I have issues with something I normally can look it over and think of another way of doing it and normally never have issues and I don't even swear working on them like he did.

@kainhall

5 жыл бұрын

@@JUST_ONE_ID10T I only swear when it's so rusty or abused that it makes my job harder... Or I break something lol

@JUST_ONE_ID10T

5 жыл бұрын

@@kainhall oh breaking something does suck. I messed up a rear rotor before bending it. I didn't know the caliper was to screw in. I was trying to use a pry bar against the rotor to push it in. It was a 1988 pontiac fiero. the rotors were 1988 fiero only. this was back in the late 90's it was my own car. The auto parts store they were 300 dollars each. you couldn't find a used one at a salvage yard as in 1988 they changed the suspension for 1988 and they changed the breaks and 3 months into making them they stopped production of the pontiac fiero. That was a learning experience. I still didn't swear. I thought they would just push in like the front.

Mrs. O gets an award! We learn many things by making mistakes. No harm no fowl. Thanks for the great videos.

Hats off to the owner to be able to walk away when the frustration set in and something really bad happened. And I understand Mr. O's desire to have the owner there for the moment of pride on the engine's first start. But business is business.

Didn't tighten the high speed tire balancer... wheel came off tire hit the floor running out the shop so did I chasing it across the dealer parking lot till it hit a parked car. Looked real professional in my mechanic uniform. New Olympic event.

@jaywebb0113

5 жыл бұрын

LMAO that sucks , i have had a few tires come loose on tire balance machine but i was able to catch it before it was spinning to fast. what i do now is we keep a hammer on the balance machine and once i think i tighten it down i wack it with a hammer a couple of times to "snug" it up.

@MAXTORRACER

5 жыл бұрын

I literally laughed out loud

Sometimes a new set of eyes make all the difference. The guy probably just got caught up looking for something more difficult and just overlooked it.

@CuttinInIdaho

5 жыл бұрын

So true!

@amak1131

5 жыл бұрын

Heck, sometimes someone inexperienced can be a godsend! People with experience may tend to look for a more difficult answer while the rookie may just go "... is it supposed to look like that?"

You are an honest man. Cranked on a 1957 Dodge 318 , no start. Towed it for two miles and no start. Opened the distributor to find no rotor. We all have our lapses.

Just about fell out of my chair laughing when Ms O honked the horn.

In this episode, Eric O closes the gap (literally!) between customer and his vehicle. and puts the spark back in another vehicle and sends another customer on his way WITH a spring in his step (and his plug wire boot).

I needed that laugh today, a huge THANK YOU MRS. O!! As our normal tradition, Sophia and I sit on the couch with my cell phone and watch your video before she goes to school and I'm out patrolling the streets we watch your videos. Today Sophia said watch Mr. O get zapped (she knows what a coil or Magneto's are) but Sophia wasn't anticipating the horn so when she tooted the horn Sophia jumped a mile off the couch or jumped the same time you did. She literally levitated off the couch. Hilarious....thanks for the laugh

I believe if you have a mechanic school this one would be so successful, having a teacher like you. 👌🐾

This is what keeps me coming back your honesty and great work ethic can't be beat. Keep up the great work Eric 🇬🇧

Customer.... Hey, I saved 800 bucks changing my own engine! How much do I owe you for putting those springs in? Mechanic......800 bucks..... 😂😂😂😂😂

@MMGJ10

4 жыл бұрын

Sometimes it's worth the learning experience. I rebuilt an engine in my 03 Liberty. Learned a hell of a lot. Lol. Hopefully I get some time to actually put it back in someday. 😂

@SkyMine911

4 жыл бұрын

Yup

@Thegoodbrick-jv4ue

4 жыл бұрын

Kevin Burns 😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂

@denospyridon3126

4 жыл бұрын

Kevin Burns - I know a mechanic who would rip someone off like that. And that is why I quit that job. I won’t even take him to church with me cause he’s the type that would steal the blessings out of the holy water. Not even kidding L.o.L

@bleachinuri

4 жыл бұрын

@False Flag 🤣🤣🤣🤣🤣🤣🤣🤣

About 45 years ago, when I was in school, I worked on cars in my front yard in the student apartments area (1 story GI-Bill surplus tarpaper shacks from the late 1940’s ). After working on foreign cars exclusively, I took on the tune-up of a US made V-8. I can’t remember exactly what make it was, but to do the job, I decided I had to remove the distributor from the rear of the engine, behind the air cleaner, and it was a long reach with very little working room. The tune-up was all routine, gapping and installing the plugs, checking the wires, checking the distributor cap for carbon tracking, and checking that whatever triggered the spark, either points or a primitive electronic system, etc. was working fine, replacing parts as needed, etc. It was still daylight when I thought I had finished and first tried to crank it up. No spark! At midnight I was still out there in the yard fooling with it. Did I mention it was a dark winter night near the Virginia mountains and it was really cold? The car absolutely, positively had to be ready by 8:00 a.m., and I was sweating bullets, in spite of the freezing weather. Defeated, I finally went to bed. An hour later it hit me - the only major change I had made was to pull out the shaft that turned the distributor, check it out and put it back in. As I remember, back then most distributor shafts on foreign cars could only go back in one way - it either worked or it didn’t, but it only went in one way. Not so for my buddy’s American made V-8 - that night I learned that the distributor shaft would go in the correct way, or you could turn it half a turn (180 degrees) and it would also go in and seat properly, but the ignition timing would then be 180 degrees off, and the engine would never start. There may have been a way to know right away that you had installed the shaft incorrectly, such as marking the position of the distributor cap before you took it apart, but there was no glory in using common sense or caution, so this fool rushed in where a real mechanic would have feared to have gone. I fixed it at about 2:00 a.m., and made about 50 cents an hour for my labor. Was there any valid reason to take out the distributor shaft? Of course not, but I didn’t know how ignorant I was. This was the Dunning-Kruger Effect making one of its early appearances in my life. Look it up - it has universal application, just like Murphy’s Law, the only law that has never been amended or repealed!

I personally have never made a silly mistake like that (.....😆) but in about 1970 my Dad and I (12 years old) changed from summer tires to snows on his ‘66 Chrysler. It was only after we busted two wheel studs that we discovered that the studs on the driver’s side were left hand threads. What an excellent automotive engineering design innovation that was.

There is a local mechanic here does a weekend radio show. To check out the honesty of potential sponsors he would drive to their shops with a vacuum hose purposely upplugged and tell the mechanic that the car was running bad. It was easy to see who the honest mechanics were in town, all they had to do was plug in the hose. Those that quoted him x amount of $ to install this or that part he stayed away from. To their credit some mechanics easily heard the vacuum leak, plugged in the hose and did not charge him, sent him on his way. He went after those for sponsors.

The guy rebuilt the engine and didn't realize the springs for the coils were still in the trunk. We've all been there ! On a more serious note the guy is very lucky he brought the vehicle to you. Some out there unfortunately would have given him a $700. bill and said it was something else. Sad but true. Nice one Dr. O

I'm an amateur mechanic but the stupid thing I do is misplacing a tool after just having it in my hand. It drives me crazy that I do that.

@dibjr

10 ай бұрын

One time I was looking all over for my 10mm open end, probably 10 minutes. Then I noticed that it was in my left hand.

@larrymitchell3502

4 ай бұрын

You are NOT alone! Notice the - as of 02/19 - 50 + upvotes. 😂😂😂

Many years ago the starter went out on my dad's 1985 Nissan Maxima with over 250,000 miles and a manual transmission. It ran beautifully other than the starter issues. I was an aspiring mechanic so I volunteered for the job, but also because I was a kid and didn't know better, I was afraid removing the starter would spill the engine oil everywhere. So, I decided to drain the oil before changing the starter. He came out to check on me while it was draining and commented on how nice and clean the oil looked for such a high mileage engine. I agreed - he took good care of his car! I gave it plenty of time for every bit to come out so none would spill. Once I removed the starter of course I realized it wasn't holding in oil after all - relief (but I guess I also wasted my time). So, lickety-split, I changed the starter, carefully poured the oil back into the engine, and it fired right up on the first try! High-fives all around for a job well done and saving a hundred bucks! The next day, upon returning from work, my dad mentioned that he briefly heard a weird rattling while driving but it went away - probably nothing to worry about. The day after that, my dad came home from work in a tow truck. The rattling had become much worse, the car had broken down, and was at the mechanic. The next morning, the mechanic called and said the problem was in the transmission - it didn't have a drop of oil in it and weirdly, the engine was way overfilled. The cost to replace the destroyed transmission exceeded the value of the car - by a lot. -_- And that, boys and girls, is the story of how, at the age of 16, I ruined my dad's car and how he started driving a Nissan Quest minivan. My dad's been dead for years and I STILL feel guilty about it. He really loved that car. ---- Epilogue: Months later, dad received a call from the state saying that his car was on the side of the highway over 200 miles away. Apparently after he traded it in, the dealership simply filled the transmission with oil and sold it to an unsuspecting victim who never registered the car, so the state thought he still owned it.

Yep I was 14 my first o\haul on a 55 ford Y block It was 180 out ,After a week of cursing and nashing of teeth,My Father came over ,But I had just figured it out but I didn't say anything we fussed a bit and stared it ,He was the hero.And then died 6 months later of cancer.The only father thing he really did.RIP Paul

The fact that this guy rebulit his engine and(as you stated, Eric) everything was neat and tidy and appeared to be in place shows that he had done everything right....almost. Even good professionals make mistakes from time to time and if anything this little video shows how fallible we all are. I can understand your words regards 'being set up' completely but you did your customer proud and credence to both of you for 1.) Having a go at rebuilding and engine 2.) You being a genuine professional and concentrating on the basics in your diagnosis....I know many who would not attempt the first and others who would use the second as a money making exercise..Thumbs Up....!!

mrs O and the horn definitely gets a like from me!

@capnskiddies

5 жыл бұрын

I read that back to front first time round. My mind is filth

@malcolmyoung7866

5 жыл бұрын

Mine too....although it's been a while for me so I don't know why of what for anymore....

I've done a lot of diagnostics in my life, in multiple fields, and ANY time you tell yourself "no one could be that stupid", they will prove you wrong nearly every time. Always check the simplest stuff first.

This is a lesson on always starting out with checking the basics BEFORE you start getting complicated. Is it getting spark? Fuel? Air? A lot of guys would assume it's GOTTA be something more complicated since "no one can be THAT silly" and start by playing around with the timing belt.

Sticking to the “trouble shooting tree” is just beautiful. Shows how first verifying basics can lead to a quick fix.

As a teenager left the wrench on the air cleaner slammed the hood shut ,started the car it fell hit the fan shot up hit the hood and dented it then fell back back hit the fan one more time and went thru the radiator.. to this day I never leave anything in the engine compartment I guess it's true you always learn from your mistakes

@Graham_Langley

5 жыл бұрын

Many years back, when washing a car for the first time after it had been in the body shop (at someone else's expense) I found two small bumps in the centre of the bonnet. Opened it and found a bumper bracket sitting on top of the air cleaner - and a nice shiny new one where it should have been. Body shop were rather embarrassed.

@ethanpoole3443

5 жыл бұрын

That would be about my luck, but you certainly will never forget to account for your tools at the end of a job now,

@williamtyrrel769

5 жыл бұрын

I once lost a socket in my wife's Nissan.. Had this little cavity under the battery mount plate. Never did get that socket back...

I installed calipers upside down and was stumped as to why I had a spongy pedal after bleeding. Oops. Thanks for being such a humble mechanic. And not grilling the kid for a simple mistake. 👍🏻

Your honestly and humbleness will bring you even more business than you have now. Stay blessed.

Funniest thing I found a customer replaced his fuel pump In tank and said it still won’t go ,got there no fuel to rail but I could hear the pump he left the dust cap over fuel inlet and pushed hose straight over it 😆

I replaced our family car's engine (2005 Honda Civic 1.7) by myself when I was 15. I pulled the blown engine out and replaced it with a junkyard engine that I had taken apart, cleaned up, and fully rebuilt. New bearings, rings, seals, etc. When I installed the engine in the car and bolted the engine to the transmission I went to turn the crankshaft to line up the holes in the flexplate with the holes in the torque converter so I could get the bolts in and the crankshaft wouldn't turn. I loosened the bell housing bolts and the engine would turn again, but as soon as I tightened the bolts down again the crankshaft would lock up. I called a mechanic friend and he told me I probably put the flexplate in backwards. I pulled the engine back out to check the flexplate and sure enough it was on the engine backwards and it was sticking out, so when I bolted the engine to the transmission the crankshaft was shoving the torque converter into the bell housing and locking everything up. Once I turned the flexplate around everything was fine, that engine still runs perfectly to this day. February 2022 update: That engine is still running perfectly. I recently did a compression test and got an even 210 PSI on all 4 cylinders. I'm currently driving that car 50 miles a day 5 days a week to and from college and that engine has been totally trouble free.

@davecrupel2817

3 жыл бұрын

Nothing beats a Honda 4 stroke engine. Especially an older cast iron engine. You can't kill it.

@averyalexander2303

3 жыл бұрын

​@@davecrupel2817 Yup, Honda makes great engines!

@thatoneguy9437

3 жыл бұрын

@H. Bailbondsch is there any part of that you're proud of or did you just want to brag about how inept you are when it comes to taking care of cars?

@IIGrayfoxII

3 жыл бұрын

@uhチュンチュンマル I cant see how sucking hot air will lead to an overheat. Something else had to have happened. I have run my subaru without an air filter in the garage to test things and it never overheated. It idled like a pig as it had no MAF sensor data, but it ran.

@tyree9055

3 жыл бұрын

@H. Bailbondsch You just expect too much from these civilian vehicles. I have to admit that I expected too much from my 2002 car (in comparison to my 1990's one). They're not as structurally sound nowadays, but easier to work on (for the most part). Still, I haven't blown any engines up due to abuse (though I did drive one too far after the water pump blew out on the interstate - it was only a half mile at most but it was still enough to seize the engine up). 🙄🤬😞

Give thanks that the "fix" was an easy one for a change, and you helped someone who will be your customer for life. great job, wonderful channel.

Owner did a great job on the rebuild. Kudos!

I rebuilt a NP231 for the first time last year. Heard everyone complain about how hard it is to get the pump in right. Was super easy, didn't even have a problem getting the pump in! Had the transfer case all sealed up, full of fluid ... then noticed the pump sitting on the workbench.

As a teenager I replaced lots of parts on my old hot rod. Turns out that they run much better with gas in the tank....... Lesson learned.

@ainzooalgown7589

5 жыл бұрын

mine was installing the gas tank without the pump

@keithlea6804

5 жыл бұрын

been there done that.lol

@navret1707

5 жыл бұрын

John Baugh - after an MGA rebuild, I found the distributor rotor sitting on my work bench. 🤦‍♂️

You’re such a nice guy for looking in the back for the parts. Good on ya!

Could happen to anybody, the guy actually did a pretty good job.

Well not something "I" did, but was involved in... my wife was an RN working the graveyard shift at the local county hospital and usually started for home around 3:45am when one early dark morning my wife calls home and is crying saying her Jeep won't start. It was a Cherokee Laredo with an automatic... I get there and it is COLD out... here I am at 4am, in the winter, cold as hell, wearing my flannel pajama bottoms, a sweatshirt and my carhartt jacket. Grabbed the keys from her, got in and tried to start the jeep and no go, looked down at the gear selector and it was in DRIVE still! Put it in Park, started it up and let her know "it was fixed"... (Hubby's gotta be the hero right?) 😜

@smaqdaddy

5 жыл бұрын

The easy fixes are my favorite!

@blake102989

4 жыл бұрын

Shoulda drove off and made her walk home for makin u have to do all that so early 😂

@beastfromtheeast9318

4 жыл бұрын

So how did she even get the keys out of ignition to go to work if the shifter was in drive

@bobm7275

4 жыл бұрын

@@beastfromtheeast9318 Easy dumb ass it was in park then, It only got in drive while she was fumbling around in the cold, dark night.

@beastfromtheeast9318

4 жыл бұрын

bob m ahh man fuck you fucken millennial. Sorry sack of shit. You probably don’t even know how to change oil on a car.

Someone, or a group of someones, did send me a "test car" once. It was a Supra, about a 1991 if I recall. I had owned an '84. A nice car, 5MGE motor. Anyway, the complaint was "no AC." I attached a gauge and saw the standing pressure looked very reasonable, yet the compressor would not run. I knew that Toyota likes to use several fused power sources, and their module is called an "AC Amplifier." I called our help desk and got a fax (it was the 90's, no email) of the AC schematic, and found that one of the fuses was in the right hand kick panel. It was missing. We replaced the fuse and sent it on its way as a "no charge." Later, we were contacted and told that it had been a test car.

@ethanpoole3443

5 жыл бұрын

Art Houston Toyota still likes to do that, burying one or two fuses off in never-never land for no apparent reason for the AC system. Why they can’t put those fuses in the main fuse panel is a puzzle.

@averywellsand888

5 жыл бұрын

@@ethanpoole3443 I love hunting for relays in my early nineties Subaru

Wow! It was a short video but the honesty in it was priceless. Thanks for doing this video.

That horn honk was amazing!

OMG, when Mrs. O blew that horn...I haven't laughed so hard in a long time. Thank you for making my Monday!

The old bip the horn trick.

@ferrumignis

5 жыл бұрын

Gets 'em every time!

Hey Eric- O, Thanks for your honesty man. You are a true excellent mechanic.. respect man. One silly thing i did while i was servicing my car. I drained the oil and forget to replace the oil pan plug and i realised that after i had pured [3] bottles of full synthetic engine oil through the engine. Weare human and we will forget even the simplest things sometime

@steelwheels327

Жыл бұрын

I did the exact same thing Ed ....it happens !

Reminds me of many years ago when my friend's Mini kept jumping out of gear. The main dealer wanted to replace the gearbox. I took a look and fixed it with a new rubber stabiliser bush at 0.01% of the cost.

We had a car towed to our shop years ago that had a no crank no dash lights issue. The customer replaced the battery himself and it still didn't start. When it arrived at our shop we discovered that the customer forgot to remove the plastic caps that cover the positive and negative poles on the battery and installed the battery cables right over them. He was very embarrassed to say the least. Really enjoy your videos Eric!

@richrodriguez8156

5 жыл бұрын

faf

@rogerdavies6226

5 жыл бұрын

I just saw one of these on Utube a few days ago

@davidwithrow512

5 жыл бұрын

I've seen that more than once.

@thegoodearth7

5 жыл бұрын

That is actually pretty funny.

@bakedandsteaked

4 жыл бұрын

That's incredible. I feel bad for people that stupid.

1968, junior in college working part time at a Chrysler Plymouth dealer, new car set-up, sometimes tune up. Old customer brought in 1967 T-Bird for a tune up (we worked on anything). I did the tune up, plugs, points etc. Opened the drivers door and set the emergency brake and started the engine to set the idle. When it came off high idle it was still too fast so, per the book, I reached through the window and put it in gear to set the idle. Also, per the book, driver door shut, put in gear, the emergency brake automatically released - a FoMoCo convenience. So there I was hanging through the window as the car idled away with me across the shop. I managed to slam it into park before it hit another car in the shop. I was the talk of the shop for the week; one of the mechanics carved a set of chocks with my initials on them, I was to chock any car I worked on. I still have the chocks.

@Scrubworks

5 жыл бұрын

I did something very similar when I was an apprentice a few years ago. We had an old Rolls-Royce Silver Shadow on a four-post lift for some fixes. The windscreen washer system was not working, but I had tested the pump itself and found it was ok, the problem was between the pump and the switch. For reasons I can't remember, the lift was raised about 4 feet in the air, and I was standing on it doing the work. I had the engine running, because the washer system wouldn't work without the ignition on, and I didn't want to burn out the coil. The button to use the washers was on a stalk on the left side of the steering column. I reached through the driver's window (car was right hand drive) to press the switch for the 10th time, and it still didn't work. Frustrated, I withdrew my hand quickly, and accidentally bumped the column shifter, putting the car in reverse. For a heartstopping moment, it reversed along the lift, and came within inches of overcoming the chocks on the ends of the lift ramps, specifically put there to stop cars falling off. Had they not been there, I would have hung the arse of the Rolls over the edge and probably put massive dents in the sills and been in a shitload of trouble. All future work was done with the handbrake very very on.

@beezertwelvewashingbeard8703

5 жыл бұрын

My cousin and I put a replacement engine in his mom's 1970 mustang in the backyard. Went to start it from under the hood jumping the starter relay with a screwdriver. Car was in gear and took off pretty fast. My cousin being 300 pounds and myself being the 125 pound skinny guy, I was the one who ran after the car and jumped in dukes of hazard style and got it stopped before it went through the back of the garage.

@rogerdavies6226

5 жыл бұрын

grin

@JohnRodriguesPhotographer

5 жыл бұрын

I did that once. I forgot about the vacuum release on the emergency brake. Wasn't a big deal there was a house in front of me! Thankfully it was my house! Just got to remember to yank the vacuum hose if you wanted leave the parking brake on and put it in Drive. It's right above the pedal on most of them.

@tinknal6449

4 жыл бұрын

@@Scrubworks Finish the story!

dang she gotcha good haha way to go Ms. O

After an engine rebuild my friend put in spark plugs that were too long and they hit the pistons. 1968 Pontiac GTO. I happened 40 years ago and haunts me to this day.

I had a 1983 Camaro with an automatic transmission. Wanted to learn how to drive stick, got all the parts from a junkyard and successfully converted the car to a 5 speed. A few months later, doing an oil change, I spent 45 mins looking for the transmission dipstick to check the fluid. Couldn't find it.. jacked the car back up, looking underneath to see where the dipstick enters the transmission to finally realize.. there's not even a transmission pan anymore.. doh!!!

@Cheepchipsable

5 жыл бұрын

They still have oil in them though.

My dad just did a tune up on the family car and now no start. Frustrated he went inside for a cup of coffee. I looked over the engine and noticed the negative wire on the ignition coil was disconnected. Reconnected the wire by that time my dad came back out and I told him to start it up. Started up and ran fine. Told my dad what it was and he just called me a smartass. I told him this smartass just saved your bacon.

Not many honest mechanics around. Wish there were more like you. Thank you for what you do. Have a blessed day

It’s refreshing to watch a humble professional share His knowledge gained through experience.

This man has been zap before, I died at the horn

Confession is good for the soul, so: After replacing the blown turbo on my CDTi Astra, I'd almost finished reassembling everything so it was time to fill the radiator. I decided to just pour the coolant straight into the top radiator hose and I'd poured about 3 litres into it before I looked down and noticed this wasn't the top radiator hose, it was the air intake. I'd filled the intake, manifold and two cylinders with coolant. After I'd finished panicking I managed to recover by cranking the engine with the injectors removed (which emptied pressurized coolant all over my garage). I still can't believe it actually made it back to life after that. It wouldn't be so bad if I was a beginner, but I've spent my share of time under cars and I'll never forgive myself for this one.

@frazerguest2864

5 жыл бұрын

James Skipworth :Holy shit ! That’s awesomely bad.

@jamesskipworth939

5 жыл бұрын

@@frazerguest2864 Yep it was definitely the dumbest thing I've done to a car that didn't involve setting it on fire.

@aarongrabowski5620

5 жыл бұрын

James Skipworth sorry but I laughed so hard reading this!!! Thx, I needed that. Certainly did my share of blonde moments

I really appreciate your competence and honesty. You are a true mechanic. I love this so much! I wish you could do a story of his response.

Love that Mrs O got you with the horn, spat my coffee out when she did it 🤣🤣🤣 that's my favourite trick too.

I had a code for a cam position sensor in my 97 Cougar. Went to Carquest picked one up and put it in. Error stayed. I spent countless hours researching expected resistance in wires, shielding issues, etc. I spliced in new wires, picked up a different ECM, tested wire ohms, etc. I finally cried Uncle and took it in to the Dealer. They couldn't see anything with their equipment and said I went further with my diagnostics than they would have. I finally told them to throw a different sensor in. Turns out the parts store sensor was bad. A bad $20 sensor that takes 2 minutes to replace cost me hundreds of dollars and dozens of hours researching and diagnosing. Never assume the new part you buy is good. The bonus is I did learn a lot about how signal wires can affect the ECM.

@Realdogday727

5 жыл бұрын

Better safe then sorry I always say when working on cars!

@scowell

5 жыл бұрын

Was it AutoZone? NAPA usually gives higher-quality parts.

@TylerBoespflug

5 жыл бұрын

It was Carquest before Advance Auto Parts even bought them. Frankly, I think it was a fluke I've never had issues with a Carquest product other than that one time. I did avoid anything electronic from them for quite awhile though.

@Cheshire897

5 жыл бұрын

A few years back, I had a VW TDI with a starter going south. Got a Bosch remanufactured and popped it in. Car started fine the first three times. The next start, car running , but I hear a whining noise. The starter is not engaged, but the motor in the starter is running. Okay, a bad starter, I got another one. Installed it, and the same thing occurred again. Three normal starts, then the fourth start, the starter motor is running, but not engaged with the flywheel. I spent the next week chasing diagrams, checking wiring etc trying to figure out what the hell? Finally decided to check the starter on the floor AGAIN! Three normal operations,the fourth,the gear retracts, but the motor keeps spinning merrily along. I really wanted to tear it down to see how it was possible, but I didn't want to void the warranty. The next starter works fine 8 years later. What are the chances of 2 identical weird problems in row causing you to doubt your sanity?

@TylerBoespflug

5 жыл бұрын

At work (IT) when we have the same stupid problem with hardware occur within a short period we always say they were made on a Monday after a big party weekend.

In my younger years in high school around 1990, my brother was teaching me how to change the oil in my 1969 Camaro that he gave me. I removed the oil filter, put in 5 quarts of Kendall 10/40, started her while seeing the lack oil pressure on my Auto Meter gauge. I quickly shut her down, looked underneath and realized I forgot to install the new filter after seeing all the oil on the floor. I have never made that same mistake ever since. Lol

@kyoteecasey

5 жыл бұрын

Similar to my first oil change, i forgot to replace the sump plug, poured in new oil, and watched a puddle slowly form under the car and realized my mistake. Always double check the plug is back in before adding the oil

@Xiferr

5 жыл бұрын

My first motorcycle oil change i ran all the new oil right back out the drain plug because i forgot to put it back in.. i did the filter just fine just forgot the plug LOL. $40 of oil down the drain..

Spent three months rebuilding the 413 wedge, in my Fury I when I was 17. I had it all together and needed to get the timing right, but I had to go to church that evening. My cousin came over while I was gone. By the time I got home, he had set the timing and had got it started. I could have killed him. Three months and this J... A.. was the first to start it.

Sounds like he did a decent job on the rebuild. It's in the details. Poor fella.

Not a mechanic problem really but a friend of mine decided he'd be nice and start his sister's truck for her when he left for school that morning. I came by the house the next morning to pick him up for school and I said is your sister going somewhere soon? He's like IDK let me ask her, she was upstairs asleep, he comes running back down and says no, I said why is her truck running then? He says Holy sh** that thing has been running out there since yesterday morning when he started it for her, she never left the house that day...so I said well tell your sister her truck is warmed up and the tank of gas I put in it 2 days ago well is gone, it was literally on empty....so an 89 Chevy S10 4 cylinder will idle for a whole day on a full tank of gas if anyone is curious LOL.

@danhillman4523

5 жыл бұрын

I did it once. Let my truck idle in the garage overnight. OOPS! Garage was nice and warm though, so there's that.

@wildbill23c

5 жыл бұрын

Cool

@gazgsxr

5 жыл бұрын

brilliant! cant stop laughing lol

@arnemaeschaelck5012

5 жыл бұрын

@@danhillman4523 In the garage???? You'd be dead??

@kylesonsalla7620

5 жыл бұрын

@@arnemaeschaelck5012 Why? Not all garages are attached to the house....

OMG the horn.. so evil ... I LOVED IT!!!

@WifeBTR123

5 жыл бұрын

I Lol'd

@s2hjt

5 жыл бұрын

Newby garage prank.

I almost fell out of my chair laughing when she honked the horn. Not because you jumped but because I did.

I have to say, in rebuilding many motors at home, this stuff happens. By the time you put it back in, you forget the little things! Worst thing in the world is replacing the fuel pump, only to realize you didn't put the new pump in the night before like you thought and you install the tank the next day and can't figure out why it won't start the next day (was working 80+ hours a week at my day job when this happened BTW)

I think we've all reassembled something and had an extra part leftover.

@brentbuckingham291

4 жыл бұрын

Extra parts are a key indicator that you may have not completed the job.

@gslogar1

4 жыл бұрын

I built a gas turbine from all the parts supply by our production stores and had seven parts left over. Spend the next week tracking down those parts to see where they went on the engine, after all I managed the build of material during the engine design. Someone just left the parts on the parts cart from another type engine build. Scared the hell out me that I wouldn’t know where these parts went on the engine.

@brentbuckingham291

4 жыл бұрын

Gerrick Slogar LOL

@DROGOC0P

3 жыл бұрын

happened to me with an airplane rudder. I had one extra little screw, the supervisor excoriated me lol

@modesttoolbox

3 жыл бұрын

That just means you did it better than the manufacturer lmao

Oh Eric we need a follow up on this one. We want to know what happened when you told him.

@jusb1066

5 жыл бұрын

you try not to embarrass the guy, weve all done something silly, hope eric will be a bro and discount his bill

@Joseph1NJ

5 жыл бұрын

They'll both get a good laugh, but most of all, he'll be relieved it was a simple fix.

@edwardmartinez199

5 жыл бұрын

@@jusb1066 I think the first hour diagnostic fee is appropriate.

@ImLivin6

5 жыл бұрын

Chris Jepson I agree, it would be nice to know the rest of the story (Paul Harvey). I would bet that you will restore his faith in his mechanical abilities. And all without any OBD hook-up :).

@ischmidt

5 жыл бұрын

If I were the customer I'd have a good laugh and then be very proud of how well that rebuild ran first start. (And hey, Eric's got it on video so he didn't really miss it!)

0:50 right off the bat, thank you for this video that I have not watched! Perfect!

First time I did drum brakes with my friend on his 76 Chevy pick-up, we completely disassembled both sides simultaneously and then had nothing to refer to visually, when we went to reinstall the new brakes and associated hardware. Eventually, we got it together. Did it the hard way, though.

My story: first nice day of spring, time to pull out all the summer toys and get started on yardwork. First step, pull the spark plugs from the riding mower, push mower, and string trimmer, and go to the hardware store for new plugs & fresh oil. Changed the oil in the rider, installed the new plug, did the mowing. Changed the oil in the push mower, installed the new plug, did the push mowing. String trimmer is 2-cycle so didn't need the oil changed. Now, this trimmer was very predictable. With a cold engine, full choke, four pulls and it would sneeze, half choke and one pull and it would start. Every. Single. Time. I must have pulled the rope 30+ times, and it wouldn't even begin to try to think about starting. My lovely wife called across the yard, ever so sweetly, "Did you put the new spark plug in it?" As I flipped it over to prove it, I positively BELLOWED back at her, "OF COURSE I PUT THE DAMN.... no."

@ct1762

5 жыл бұрын

you didn't feel how there was zero compression on the pullstart?

@lelandp5859

5 жыл бұрын

not sure but maybe it has a compression release so no comp til it spins fast enough? could be absolutely dead wrong

@DaddyBeanDaddyBean

5 жыл бұрын

It was a while ago; it's a valid question, but I don't know. Maybe compression release, maybe I just wasn't paying attention, maybe I noticed but didn't grasp the significance. I don't have that unit anymore or else I'd go try it with and without the plug right now.

My first rebuild was on a Cessna 150, it was a 4 cylinder, i was in mechanics school and it was a team project. I happened to notice my friends team had missed some gaskets that go around the lifter cover tubes to make it waterproof. Not a big deal but would have resulted in them having to back track to fix it for a good grade if I hadn’t slyly pointed it out. Simple mistakes happen that’s why a fresh set of eyes never hurts. Edit: this was an airplane just to clarify

It was the first oil change after Dad and I finished a total restoration of a 69 Camaro. Took off the old oil filter, but the old rubber gasket stayed on the engine. Put the new oil filter and stacked the gaskets, unbeknownst to me. Fired it up, and oil everywhere! They don't stack well! Wouldn't have been such a big deal, but the underside of the car was as clean as the body. It took some doing to get all that oil off the undercarriage! Now I check for a gasket every time on every car!