Your literally my favorite person that creates content your such a inspiration to go out there and get stuff done!! Keep up the good work love the videos man 🤘🏻

@austinniemela

3 жыл бұрын

Thank you I appreciate it!!

Wasn’t sure how much I was liking the rear bumper until I saw it on the truck, definitely did a fantastic job on it looks absolutely amazing!

@austinniemela

3 жыл бұрын

Thanks!!!

Awesome !! love this channel, its just a regular guy, with tools, skills, smarts, motivation, and building cool stuff, no flashy cheesy fluff

@austinniemela

3 жыл бұрын

Thanks man! I appreciate it!

Absolutely fantastic. IF I could suggest one thing, use a rubber gromet for the plate wire where it passes through the back.

Black wheels on a set of 33~35 Patagonia tires! 👍🏼

The detail and craftsmanship is just beautiful! Love the builds.

@austinniemela

3 жыл бұрын

Thanks man!

Super clean bumper

I love the Shoshone license plate. Even though it hasn’t been registered in 18 years. I’m not in Shoshone but I live in North Idaho. Nice job as usual.

Super clean

Sweet build

Nice work.. simple and clean.

Simply the best doing that..!

Great looking rear bumper.....to match the great looking front bumper. You really have a knack for those bumpers. Nice solution for the plate.

I simply spray some thinner with my gun when I finish painting and I call it clean.. Doing that for years and had no issues

@twotwentyswift

3 жыл бұрын

Does that work with raptor liner?

When putting a bars on or rock rails ect I use a office chair minus the back rest with a adjustable gas base, It’s like you personal (padded) hydraulic lift. Nice work again Bro! Edit:: how TF can people thumb down this video! Lighting good Content, good Concise and to the point, good Audio editing and backing track, good Well spoken, good Toyota, good AAAHHHAA THE NISSAN and JEEP PEOPLE ARE BACK!!

@austinniemela

3 жыл бұрын

Good tip!

Love your work dude. Just wanted to pass a little tip, I have heard that when using weld through primer, you want a very thin coat of zinc enriched primer for steel. Zinc to help stop galvanic reaction, and thin coat to keep from messing the welds up.

@austinniemela

3 жыл бұрын

Thanks! I was using zinc weld through primer!

Man, I've been watching your series of vids and I'm impressed. I work for Toyota in Australia fitting factory bars. Yours look awesome. Well done.

Nice job Austin.

Looks really good! Can't wait to see what wheels you pick out

Love watching these videos gives me ideas and a chance to help someone out. Beauty job.

Awesome job

Black steelies + mud terrains. Black steelies would look so good on that.

Looks so good! Would definitely use your templates if you did bumpers for your wife's 3rd gen!

Looking forward to seeing what’s next to receive your creative touch. 🇦🇺👍🏻

Truck looks great

@austinniemela

3 жыл бұрын

Thanks 👍

That hinge was ingenious!

Method wheels wrapped in some 33" Cooper S/T MAXX or S/T PROS would look sick.

I always like before I watch because I know it’s gonna be fire 🔥 👌🏼

@austinniemela

3 жыл бұрын

Thanks!!

Looks good

Ive really enjoyed this build. I have a 91 regular cab Pickup myself. Just want to throw out my opinion. Im aware that the 20 inch rims like on the red truck have been fashionable for a long time now but I feel they look too cheesy. The old school big sidewall/small rim combo looks proper on these trucks. Plus the ability to air down and get flotation and grip is huge. I'm sure you'll pick the look you want, but some black 15 inch steelies and some 33x12.5x15 tires would look great on this machine.

Perfect job!

@austinniemela

3 жыл бұрын

Thank you!

It came out really well .. quality job

That bumper (and all your work) is NICE! You could do a how-to and Raptor line those rims and put some spacers on for a budget solution until you get ideal wheels/tires.

nice work. great spray finish.

@austinniemela

3 жыл бұрын

Thanks 👍

Good stuff, man! Love the ingenuity and attention to detail. Keep it up 🤙🏽

Looks great.. the whole truck is looking great. Just enjoying the journey and looking forward to seeing what's next. Me, I would stick a shell on the back of it lol... but hey who am I lol... just a good looking little truck so far. Everything else you do is just that ahh factor now.

You killed that! So nice.

Excelente trabajo bro, muy detallista y eso es lo que se diferencia de la calidad 💯 Muy buen canal, tanto que me estás animando a que yo fabriqué mi bumper 👌 Saludos...

Very COOL! I just recently found your channel so I'm binge watching LOL Getting me motivated to try my hand at building my own bumpers for our '74 CJ5👍🏼😁

Great job as always!

@austinniemela

3 жыл бұрын

Thanks again!

You're very inspiring and I enjoy your creative solutions and process. Idaho is cool, I once had to deliver a Mazda B-series to Pocatello and spend a couple nights in Lava. It's beautiful up there.

@austinniemela

3 жыл бұрын

Thank you!!

Looks awesome!

@austinniemela

3 жыл бұрын

Thanks!!!

@frankfilippone9679

3 жыл бұрын

I'm actually about to buy the 600$ TG bumper for my 03 Tacoma, would it be worth it to you to make another one of these puppy's? I'd rather give you the money if it's worth it? If not I understand, I live in long island NY we could probably figure out the shipping? But like I said it would have to worth it for you?

Awesome DIY legit bro! bravo!

Looking good dude

Rear bumper came out really nice.

Nicely done sir

Great piece of work bruiser!

The market for 2nd gens is much bigger than 1st gens. Hoping to see some plans for 2nd gens soon!

A set of soft 8’s and some 33 inch KM3’s would look badass.

Turned out great, can't wait to see what's next

You make everything look so simple but you are just good like that excellent job 👍🏻

@austinniemela

3 жыл бұрын

Thanks!! Video makes everything look easy!

Thank u for the content and the knowledge of doin amazing work flawlessly. I plan on using them on my T100

Good stuff bro looks real clean

Looking good 👍

Daaamn that’s a nice ass bumper.. love that it’s black and not chrome.

I’m not sure how I came across your channel, but I’m glad I did. I’ve just binged all the Toyota build videos! Awesome work! I can wait for the next episode.

@austinniemela

3 жыл бұрын

Thanks man! And welcome!!

Looks good buddy.

@austinniemela

3 жыл бұрын

Thanks 👍

Awesome video as always. The raptor liner really tied the bumper up nicely, looks sick. Also, I think over time just due to wear from dirt and debris, those magnets will lose some of there holding strength. So maybe it's a good thing they're so damn strong.

Great Work Friend

Perfect👍

Great video cool bumper! Great Idea with the Magnets! I was going to message you to do something like that. For Wheels on the Cheap, Raptor Line your wheels black and put Either 33x10.5r15 or 255/85R16 depending on your wheel size.

Love it

Quality as always.....you have some serious skills💪👌🇮🇪🇮🇪

@austinniemela

3 жыл бұрын

Thanks!!

That is a very nice video with explanation and a great result.

@austinniemela

3 жыл бұрын

Thank you very much!

Easy way for the plate mount is hit the pick your part yard and grab a plate frame from a 70s/early 80s car that had the fuel filler behind the plate. Spring loaded and ready to go.

I like the bumpers.

Now that you have done a front and rear bumper you may aswell do the full bar-wprk all around and make some rock sliders and a headache rack

Man this thing I think would set this truck off is black flares and either the color match wheels or desert tan wheels but it's you truck love the content and keep up the great work man you bust your ass for your trucks and channel

GREAT JOB MAN, I´VE BEEN WATCHING ALL YOUR VIDEOS FROM HONDURAS CENTRAL AMERICA. I MIGHT CONSIDER WORK IN MY OWN TOYOTA WITH SOMETHING LIKE YOUR WORK. I KNOW IT WON´T BE EXACTLY LIKE YOURS BUT I´LL TRY. MY BEST FOR YOU, THANK YOU FOR YOUR HARD WORK. MANY BLESSINGS.

@austinniemela

3 жыл бұрын

Thank you!!!

Very nice job i am waiting for the next video very soon

Did a hidden hitch mount on my chevy truck 30 years ago. Used a spring plate mount off of (i think) a buick

Love a new video,in physics class rn

Love the paint work 💟💯💥 Too good💯

Very cool as always ,hi from Kazakh🇰🇿

Mind blowing. Good work 👌

@austinniemela

3 жыл бұрын

Thank you so much!!

Maybe a set of method 703’s with some nittos? I feel like the bronze color would compliment the raptor liner well

The Yota would look with a set of rocker sliders / nerf bars. The Yota is looking good.

You should do a lobster back 4" stainless snorkel next 😁

very nice

Austin, Glue some thin rubber over the magnets this will reduce the magnetism and dampen it when it closes.

could put some small pieces of tape on the bumper, maybe a few layers haha. Great job, I built two for mine. Really fun and looks way better.

I know you already sold this truck, but I was considering this bumper build, and I did notice a slight issue guys might want to consider if they go forward with it. The access hole for the spare tire hoist is possibly partially blocked, and may be a challenge to get to. Lowering the bumper by half an inch or maybe less would probably solve this. Maybe it's hard to actually tell unless you can see it in person, but just keep an eye out for this when mounting.

Raptor lined black steel/ alum rims. 16” or 17” maybe a 33” tire. Just my take. Well done done sir

Mickey Thompson Baja MYZ P3 37s💪🏽 Got them on my Jeep!

You should ride by the old owners place when you get it done and get their reaction lol

Dude I cannot get enough of your channel. You’re fueling my new found love of Tacoma’s

@austinniemela

3 жыл бұрын

Awesome!! Thanks for watching! Great trucks aren’t they?!

Thats one solid bumper! Good job mate.. #allTheWayFromMalaysia

@austinniemela

3 жыл бұрын

Thank you! Should do the trick!!

Salut comme d'habitude super boulot. A+

Хороший бампер👍

Son tremendos los videos y los trabajos que haces! Pero podrías subtitular los videos??? 🙌🙏 Sería genial!

Top job....

👍

Love it! The license plate hinge is cool. Have you found a 4.88 front diff for the red truck?

@austinniemela

3 жыл бұрын

Got one on the way finally!!

@jimmadonna1436

3 жыл бұрын

@@austinniemela cool! I'm really looking forward to this.

Are you going to keep this truck Austin or Flip it? I wasn't sure how the hidden hitch was going to turn out, You killed it!

@austinniemela

3 жыл бұрын

I’ll be selling this one when I’m done!!

@bob_frazier

3 жыл бұрын

@@austinniemela Oooh! Bring a trailer!

👍👍👍

Great work, DO you have any design for the LR2? Rear bumper? Thanks in advance

Any custom bar work for the black truck? Loving the metal fab series

I would have put extra reverse lights mounted in this bumper That is for sure I would have put the same lights that I put in the front it's that I put in the front in the back please comment back if you feel the same

Will you be making any custom 3rd gen 4runner bumpers?

@austinniemela

3 жыл бұрын

That may be someday!

лютый чел