I always wonder why there are thousand of views, but only hundreds of likes only. I mean I like it before I always watch it because there hasn't been at no time I didn't like it. Sometime I just wonder if that is a youtube thing. Great job guys!!

@proberts34

3 күн бұрын

Agreed. I usually start a C&C Equipment video, like it, then go full screen. Clinton, Kevin, and the boys are first rate. 👍

@petenolte4192

3 күн бұрын

If I start watching the video I forget to hit the thumbs up

@peadenl

3 күн бұрын

Sometimes I fall asleep and KZread might go through 10 videos while I’m sleeping. That might be one reason. I will still find your videos and like them while I’m awake. 😊

@rickydonahue1586

3 күн бұрын

If you're subscribed then KZread should count it as a like as soon as you start the video. I mean they already know that you like it because you're subscribed to the channel. If it gets to a point where I no longer like or relate to a channel then I simply unsubscribe.

@TonyKing-si2ns

3 күн бұрын

BOSS MAN YOU SHOULD BE THE TEST PILOT ON THAT THING YOUR CREATING. I GOT TO BE HONEST I THINK YOU SHOULD HAVE USE AT LEAST H BEAMS TO MAKE IT . BUT YOUR SHOP YOUR WAY . HOPE IT WORKS FOR YOU AND YOU CAN WORK SMARTER. COS WHEN YOU GET OLD IT MAKES SENSE TO WORK SMARTER NOT HARDER . I THINK YOU AND KEV HAVE BEEN TAKEN TO MENNEY MAGIC MUSHROOMS 😜😜😜😜😜😜😜😜🤤🤤🤤🤤🤤🤤🤤🤤🤤

Building rigs like this to save your body will more than pay off in the future when your joints don't creak and groan and make you old and cranky

@proberts34

3 күн бұрын

"in the future?. . .old and cranky?" Ummm. 😉

@mikehunt3222

3 күн бұрын

TOO LATE!!!

I laughed when Tucker came in and was trying not to look at the welds. That is the first thing a welder will look at no matter what. Seriously though, that fixture will be very nice to use just to keep from crawling around on the floor all day which will make things go better and probably a little faster as well. I despise crawling around on a floor all day with that kind of stuff. When you make it past 50, you'll really appreciate things like this.

@rayhewitt4688

3 күн бұрын

That was a good idea that's how you learn from doing something bad something bad

@edsutherlin473

3 күн бұрын

Just add another 25 to that. I should have taken better care of myself.😂

@tomrogers9467

3 күн бұрын

I’ve “yelled” at the boys there for not wearing hearing protection when they are making noise. At 71 I’m rather tired of listening to a swarm of crickets all day and night. Too much loud work without earmuffs, and too many hours on snowmobiles and loud boats!

Blind man would be happy to see it - and Mrs B happy it was "free".

The stand is from the Wrecker build.

Really enjoy the shop builds very cool to watch. Your videos number one on KZread.

Clinton, you and Kevin bring a new meaning to southern engineering. This is one of those things that wakes you up in the middle of the night. But it looks like it work well enough and save some knee walking and possibly time to change pads or chains. Now Kevin needs to paint it so it doesn't rust away.

I'm sure Tucker has welding wire in his veins, he wasn't at all interested in what you built just the welds. 😂🤣 Brilliant idea and very green, it was all made from stuff you had laying around. 👍

Glad to see the old man showing off some welding and engineering skills, I love it.

hi boys cant tell you just how much i look forward to Tuesdays and Fridays enjoy your videos and learn a lot in the process just a good old win win thank you please keep them coming 👍👍👍👍👍

You,Kevin MBTS and DP all together could manufacture some awesome stuff. Great build

Video starts playing and my 8 year old says, “oh I love this channel”. Raising him right😊

Shop builds are the coolest. No engineering plans, not even scribbles on a napkin. Your plans were conceived out of necessity and built from your vision for job completion. You had a vision for making a task easier while providing a comfortable work platform for your employees. Like others in you inner circle who are not afraid to build tools that were jut a vision: the tile plow, tree/brush rake and limb saw that Dirt Perfect (Mike) and MBS (Aaron) built. You are the programs that draw viewers in. Keep doing what you do, love it.

Tucker's reactions to the build are priceless. A seasoned eye, indeed. Thanks for posting.

Good work fellas! Mason’s back will appreciate your efforts!

Wilson/ Finley (undercarriage company) has a rig just like this set up in their shop. Yeah if I did more than 2or 3 chain swaps a year, I’d have one myself. Great job guys. Yalls back will thank you. Ps I’ve been watching this channel for well over a year and always thought mason was your son as well. 😂

I look forward to seeing each video and whatever you guys get up to. I've learned a lot from you all. Don't stop Clint, your a great boss and great dad. Kevin is a great guy to have around. He puts hand to everything. So cool. 👀🇦🇺

DP and Aaron's shop skill's is a synonym...baling wire and shade tree mechanic. Anyone who has watched this channel for two or more years...is a John Deere Certified Rebuild Specialist.

That project that you have done looked like 2 naughty boys were up to no good hopping that when finished every one will be pleased with what they had got up to. The best part was when Tucker came in & saw what was going on, that made him happy , smiling after seeing the welding. That was the best mood I've seen him. As this is all new to me I can't wait to see how it works.

I’ve been doing that, liking before watching, since I first started watching this channel. I’ve never been disappointed.

I'm just waiting to see how you guys take some old rollers and make wheels for that thing to get it in and out of the garage. I love your garage builds!

Looks like your "professionally designed & engineered" track rail is working perfectly. Love it when a plan comes together.

@stevebeaudoin-uq6dv

3 күн бұрын

I would like to see what dirt perfect and mbts would say.

@thebear5454

Күн бұрын

@@stevebeaudoin-uq6dv Right. They are the kings of "cobulation" for sure.

Looks great Clint and crew, works great as well my friends! Thanks for sharing and I’ll see yall in the next video, Clint, Kevin, Tucker, Hunter and Mason! Prayers and positive vibes to yall and your families! Louisiana here! 🙏🏻🙏🏻🙏🏻👏🏻👏🏻👏🏻👌🏻👍🏻👍🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🙋🏼✌🏻✌🏻

kid welders are so mistrustful, you would think he has a back story. the track bench is going to be stout.love it. go kevin go kevin

Yessiree, that’s a slick set-up for swapping out them track chains & pads.., y’all be “workin smarter not harder”. Great video, Thank you sir.

Certainly no jobs I’ll ever do, but I enjoy every minute of these videos, these guys are skilled technicians and the young men are learning from a great teacher. See you on the next one. 😀🇺🇸

This looked like a Dirt Perfect project where everything was done without a plan using whatever is lying around. Demonstrates that if you have a good concept you can build the basics and then refine it with use to work to your satisfaction. Well done!

The track roller was a nice touch in using what you have available, nice job Clinton , Kevin and Mason . Mason should be paying you

Good idea! 👍! Thanks for sharing!

I would recommend using a lifting bar to move the track gizmo, that way you have more than one lifting point.😊

that was the stand for the awesome tow truck build!!!!!

Tucker now understands what Clint goes through when the kids do something that not up to snuff.

Love the project. As we get older back saving projects are very important

Like Kurtis from CEE Australia always says: "Shop-made tools are the best tools." 😁🤘

Shop built projects are always awesome! Thanks

Great team 👏 you've definitely became my favourite you tube channel

a great addition to the workshop and mostly made of scrap is the icing on the cake, great work.

Great job Clinton and Kevin

Awesome homemade invention. Thanks for sharing 👍 😊

Clint, be sure and get Tucker involved with the track disassembly. After an hour or so have him move to a track on the floor and see his reaction to doing it that way. I am with you on the work being postioned for worker comfort.

I think it looks and works frigging awesome. Great idea and job. 👍

I love your vids, you are my kind of people, humble, having a laugh while you work but still the boss at getting it done. GB :)

Nice to see a safe shop and the Willey's under prophylactic cover

thanks for the shop build video ajways like to see people useing scrap stuff laying around to build something the can use keep up the good work

Clinton and Kevin great build! This should save your backs a bit! Thanks for sharing! Kevin

DP new sawhorses are spectacular. Mbts did a nice job.

Thank you Dad for calling them your children not your kids!

@fochall1

3 күн бұрын

Yep, no baby goats allowed. Bugs me too.

Kevin the bird man keeps them coming in

Am I watching CEE here..!! Oh, no, it’s CKE. (Clint & Kevin Engineering) Cut your best and fill weld the rest..😂😂😂 Actually, I think I just saw Curtis out the back of his shop chucking..🤣🇦🇺 Top job boys. Really enjoy all the videos.👍🏻

My back and knees feel better already.

👍 Popsicle sticks... she's got a point. Would I be complaining, hell no.

This will save your knees and that makes it a great tool. Great video.

Fill in the gap between the rails and it becomes an RC Plane Runway... That way, you didn't lie to Missy... Much... 😄😁😆😅😂🤣

its cool to see you gyus making tools that is useful.

Always improving... Awesome creation. Great video. Congratulations to Tucker on graduation. Excited to see Tucker get to work in his new shop.

The plasma table is a must have.What an awesome tool

Want a good laugh guys? Whenever I watch someone on u-tube weld I close my eyes for a second! I know it’s dumb but it’s become a habit!

@motor2of7

3 күн бұрын

The dumb ones are the ones who say you can’t watch welding because it will hurt your eyes!

@wrstew1272

3 күн бұрын

@@motor2of7. The really dumb ones weld without a helmet when it’s available. 😢 then wonder why they have to wear glasses…😢

Man after my own heart,there is no such thing as a scrap pile😊

@richardw.foxhall3392

3 күн бұрын

Scrap is in the eye of the beholder, it is as of now unused stock for future projects to be dreamt up.

@littlelifters7543

17 сағат бұрын

It’s termed inventory sir.

I hit the thumbs like up first , even if ,I don’t watch, time is important here, so lot of the time ,I can only hit the like thumbs up and come back and watch later, ok thanks BigAl California.

Look out Tucker is inspecting your welds 😬😁 great job guys!

Necessity is the Mother of invention. Brilliant idea! Making something useful out of on-hand materials is the best.

The “Mark I Mod I” version proves itself.

Show all of it! Love the ideas!!

Love shop projects 👌🏻🤘🏼🤘🏼

Looks and works great!!!

GOOD WORK EVERYONE!

With all the why questions Tucker was asking he was sounding like his mother’s son!

Clint, good job, when I was working I was always trying new things that made my job easier

Guys did a good job

Great idea . it will work well.

Plan and build as you go! Can’t wait to see how it turns out.

Like shop projects guy's Like to see mores stuff like it .

Awesome job

Speaking of Dirt Perfect you would benefit from having Aaron about now. And Aaron has some great yellow paint. But you have Kevin to paint.

@user-yd3et5er9j

3 күн бұрын

"you have Kevin to paint" Kevin is about to become a "person of color"........my autistic mind tries to unsee this one 😁

@tomrogers9467

3 күн бұрын

@@user-yd3et5er9j. I see Shrek green as the perfect choice!

Thanks good idea 👍

Kevin is C&C's very own "man behind the scenes ". AL B.

That's freaking awesome! 😆

Really neat idea! Get a couple small trailer axles and tires for it and just tow it around!

Nice new tool to add to the homemade tools

Wow great job for building off the cuff !!!

Love the shop builds

Good job guys!!!

Nice job!!

Love the build

if it works, it aint crazy! 👍👍👍

Great shop project

Well needed shop equipment you can never go wrong keep up the great work and awesome content

I like it, not a bad performance for a first time use, nice build for an off the cuff put together on the spot with scrap and used parts. Thanks for the update, enjoyed watching and listening.

Great job it will work great tks for sharing😊

Great Video lots of fun

Great idea cheers

Great job make so much easier.

Great job

Enjoyed it

great idea,

looks like a back saver for sure. Mine hurts everyday so i would love that little jig. nice job fellas like always.

Good Job Again!!!

Love the "back woods" fabricating stuff. Can't wait to see more.

Great work

Great job as always.