Nice job!

Nice Job! Looks Strong.

So greatful this video answered all my questions about my inboard to outboard conversion. Have you any drawings

Great job man, it looks solid!

@sovereign_skipper

Жыл бұрын

Thank you

Bomb proof build

Did you use use the hull bottom running surface to match your bracket angles ? Will it be more of a hull extension which extends the boats effective length vs adding setback? Looking to make this but didn’t wNt to glass it to hull

@sovereign_skipper

9 ай бұрын

Hello. This is bolted to the back 50mm above the keel height with a slight taper angle on the bottom surfance as well.

verry nice! doe you have te exact messurements?? can't really see it in the video

Puedes mostrar las medidas y los ángulos please

In every corner or “90 degree” like what you see on the inside braces, do you fill those corners with a small radius of epoxy filler or do you just shove the fiberglass in there?

@sovereign_skipper

Жыл бұрын

Curves give more strength than right angles. And i would personally never use epoxy especially when building something out of polyester as it will not chemically bond.

@brandonlure2738

Жыл бұрын

@@sovereign_skipper ​ Ah I see. Also how thick is the part the motor is attached to? I see it’s three layers but doesn’t look like 3 layers of 18 mm

Hou do you mount it against the Hull?

@sovereign_skipper

Жыл бұрын

Hey! We bolt it onto the back of the boat with 12 stainless steel bolts and backing pads. 🙂

@realmrboatguy

Жыл бұрын

@@sovereign_skipper nice! thank you. verry doe you have te exact messurements?? can't really see it in the video

How many layers of glassfiber did you use outside and inside? And what type please

@sovereign_skipper

11 ай бұрын

4 layers inside and out of 900g combination matt with polyester resin

@Wfrench01

11 ай бұрын

@@sovereign_skipper thank you for answering. Im currently making something similar

@sovereign_skipper

11 ай бұрын

@@Wfrench01 best of luck hope it goes smoothly

Mi puoi mandare lo schema e che spessore di legno hai usato

@sovereign_skipper

Жыл бұрын

mi dispiace non posso inviarti il ​​diagramma poiché abbiamo progettato questo prodotto. ci sono altri disegni su internet. abbiamo usato uno strato marino da 18 mm per costruire questo pod.

What’s the weight

@sovereign_skipper

7 ай бұрын

Around 45KG or 100Lbs for our smaller one and this was was heaviest we did as it was the prototype couldn't tell u exactly but closer to 100kg depending which measurement you use

What thickness ply did you use ??

@sovereign_skipper

11 ай бұрын

Three sheets of 18mm ply for the transom

@therukugorillazaotearoa_

11 ай бұрын

@@sovereign_skipperawesome cheers

@therukugorillazaotearoa_

8 ай бұрын

Also when attaching bracket to the transom was it bare fiberglass did you just glue and bolt ??

@sovereign_skipper

8 ай бұрын

@@therukugorillazaotearoa_ we use sikaflex around each bolt, then attach it with 12 x 316 stainless steel M12 bolts

@therukugorillazaotearoa_

8 ай бұрын

@@sovereign_skipper awesome thank you