[Custom] Jordan 1 Heritage to Chicago
Turning $150 Jordan 1 Heritage Into $2000 Chicagos
Here’s the list of supplies needed for this customs:
1. Angelus deglazer
2. Angelus flat black acrylic leather paint
3. Angelus flat white acrylic leather paint
4. Angelus red acrylic leather paint
5. Angelus varsity red acrylic leather paint
6. Angelus paint brush
7. Angelus 4-coat matte finisher
8. Cotton pads
9. Nike air tongue tag
10. Awl
11. White thread
Angelus Paint Supplies:
angelusdirect.com/J44S
Jerry 44 Sneakers
Jordan 1 Retro High OG Heritage to Jordan 1 Chicago Custom
How to customize Jordan 1 Heritage
Step by step tutorial on how to customize Jordan Heritage to Chicago
Jordan 1 Custom
Jordan 1 Heritage Custom
DIY Jordan 1 Heritage to Chicago
DIY Jordan 1
Heritage x Chicago
Chicago Reimagined
Chicago Reimagine
Chicago Reimagin
Chicago Lost and Found
Chicago Lost & Found
Jordan 1 Heritage to Chicago Reimagined
Jordan 1 high Lost and Found
Jordan 1 Lost & Found
Air Jordan 1 High Lost and Found
AJ1 Lost and Found
J1 Lost & Found
#jordan #sneakers #custom
#HERITAGETOCHICAGO
#J1CHICAGO
#CHICAGOREIMAGINED
#CHICAGOCUSTOM
#JORDAN1HERITAGETOCHICAGO
#Jerry44Sneakers
#Jordan1
#AJ1
#Jordanretro
#nike
Пікірлер: 417
This is an all time sneaker hack.
This is by far your best custom! Showing the love!
@jerry44sneakers
2 жыл бұрын
Thank you
These look great! Well done!
@jerry44sneakers
2 жыл бұрын
Thank you
I'm impressed
I bought the heritage and had my boy do the same thing after i watched this video. I love them, looks really good. Thanks for the idea 👍🏽
@jerry44sneakers
Жыл бұрын
Thank you also for watching my video
@jorgerivers714
Жыл бұрын
Have they cracked? I did mine but the white paint cracked in the first wear 😡.
@NINERSbaby
Жыл бұрын
@@jorgerivers714 no i wore it once too and still looks good 🤷🏼♀️ hopefully mines wont do that 😬
@jorgerivers714
Жыл бұрын
@@NINERSbaby did you use any sealer or left it alone?
@NINERSbaby
Жыл бұрын
@@jorgerivers714 I don’t know i had someone do it for me 😬 I’m sorry I’m no help
Amazing job!
@jerry44sneakers
2 жыл бұрын
Thank you
awesome! perfect also for breds! 🔥🔥
@jerry44sneakers
2 жыл бұрын
Correct
Perfect base for a Chicago 🔥
@jerry44sneakers
2 жыл бұрын
Correct
@r.i.p2464
2 жыл бұрын
For 100% Chicago replica, absolutely! but i prefer fusion red just because of the outsole. I prefer black out sole because in my eyes all the colors are balanced. Even if you use black lace on a Chicago, there's just too much red for my liking. Light fusion red nails the chicago beater for me and for some reason, having less red makes the red pop more if that even makes sense.
@DashDrones
2 жыл бұрын
@@r.i.p2464 yeah the leather on the fusions is so good too. I've used them for a few customs myself 🔥
@r.i.p2464
2 жыл бұрын
@@DashDrones yeah absolutely! For an undesirable colorway to a lot of people, its got one of the best materials no doubt! The only shoe in my collection right now that beats its toe box is handcrafted because out of the two, the latter creased beautifully and the lfr is a close second. If you're not into nubuck then hands down lfr got the best materials on other panels amongst current release.
@DashDrones
2 жыл бұрын
@@r.i.p2464 yeah, have 4 pairs of fusions. Left one as is and the other three are customs. Will have to do a review video at some point. So glad they're still going for retail 🔥
Bro is so precised he doesn't use tape barriers.
Great vid
@jerry44sneakers
Жыл бұрын
Thank you
Thank you😢 for video I’m do it my first paint raw now with the video😎 safe a lot money 💰 😊
@jerry44sneakers
8 ай бұрын
You’re welcome
Nampucha galing mo idol! Proud si Jerry Codiñera nyan. Hahaha.👍
@jerry44sneakers
Жыл бұрын
Hahaha. Salamat
fireee
love your precision around the edges, u dont even need to tape shoesa first! awesome. May i ask where did you get new tag for the tongue?
@jerry44sneakers
2 жыл бұрын
I bought it at Etsy
@JoeTienzo
Жыл бұрын
Can you share the link for the tag?
@jerry44sneakers
Жыл бұрын
www.etsy.com/sg-en/listing/1225686973/j1-sneakers-tongue-tag-chicago-bred-aj1
🔥🔥🔥🔥
Great transformation love the new colourway - can I ask if you had to apply a sealer after the colour change to make it more durable? Thanks 🙏
@jerry44sneakers
Жыл бұрын
Yes, I applied sealer after colour change.
@dl32087
6 ай бұрын
Which Angelus finisher did you use? There’s like 4 kinds
@jerry44sneakers
6 ай бұрын
@danl7765 angelus 4-coat matte finisher
Awesome job, man! Question: I’m looking to paint my metallic midnight navy high OGs - specifically the metallic silver swoosh to black. Any recommendations on how to do so? Worried if I should do anything special because the swoosh is metallic. Thanks!
@jerry44sneakers
2 жыл бұрын
Just use first Angelus leather preparer and deglazer before painting it with black
Hey I did this too
wow thats amazing! Well done sir! 👏🏻👏🏻 How many coats did that take? F’N incredible!!
@jerry44sneakers
Жыл бұрын
Red part on white part is 4-5 coats. Red part on red part is 3-4 coats. White part on red part is 5-6 coats
@villain503
Жыл бұрын
I was just planning on paying resell prices for the lost and found Jordan 1’s. Doing it this way will save me $300 and in my humble opinion, this dope transformation looks way better! Thank you for the post sir!
@jerry44sneakers
Жыл бұрын
Thank you
This is some really great work 🔥🔥🔥 Do you have a video of you painting the heel and the Jordan logo? Did you use a small brush and paint around it?
@jerry44sneakers
2 жыл бұрын
I have a video of the heel painting but the camera is out of focus, so i didn’t include in the final cut. For the Jordan wings logo, I didn’t paint it cause even not painting it is not noticeable .
@double56a
2 жыл бұрын
Did you paint it like you did on your light fusion red to Travis Scott? Like in between the black logo?
@jerry44sneakers
2 жыл бұрын
No, because the red color here in heritage is almost same but the red color in light fusion red is like pink color so it is noticeable if I didn’t paint that
@double56a
2 жыл бұрын
What did you do with the holes in the tie box that had a little red?
@jerry44sneakers
2 жыл бұрын
I just leave it as it is. Not much noticeable.
🔥🔥🔥🔥🔥
Hi Jerry, love the video. I was wondering how to get my hands on one of the nike tags you used in the video, the red one?
@jerry44sneakers
7 ай бұрын
Here’s the link: www.etsy.com/sg-en/listing/1564573778/tongue-tags-for-aj1-air-black-red-black?click_key=646e3510eae499118977edaeb6e2d1ed215f6b9b%3A1564573778&click_sum=a6195898&ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=philsneakerpawn&ref=sr_gallery-1-3&organic_search_click=1&pro=1&frs=1&edd=1&referrer_page_guid=f785e7a12a3.2096329b516b6cb42758.00
Hello, I am your fan living in South Korea. Your custom is fantastic! Question: I will do this custom too. However, I'm afraid the toe box will crack when I wear them. If I do the same, I wonder if there will be a crack?
@jerry44sneakers
Жыл бұрын
Thank you. It’s been 5 months since I do this, until now still no cracks. My advice is prep it with deglazer thoroughly and apply very thin coats of paint. Also let it dry in between coats. 15 minutes for natural air drying and few seconds if using blower or heat gun.
Excellent work. Just curious whenever we need to clean the shoes is there any damage to the color or something?
@jerry44sneakers
Жыл бұрын
No damage if we clean. Don’t use alcohol or wipes with alcohol content. Just use soap and water or any shoe cleaner.
Thank you for all of your vids! For the Chicago, you used paint brush, for the bred toe you used airbrush. What’s you rationale for one vs the other? Thanks!
@jerry44sneakers
10 ай бұрын
Thank you. No difference, I’m just trying different kinds of tools to paint.
Great video!! One question, did you also apply the deglazer on the white panels you painted with red? Or only on the red panels and swooshes like you showed on the video?
@jerry44sneakers
Жыл бұрын
Thanks. I applied deglazer on that area too. Basically, all areas that I painted needs to deglaze first.
How many steps until the white toe box cracks a little & shows the red underneath?
Those look really good! Nice work… but what made you color match the heel part red on top of Red? you couldn’t come up with a mixture for the original heritage red?
@jerry44sneakers
Жыл бұрын
Thanks. I wanted to color match the original Chicago red as much as possible.
what’s the difference between the 4 cover from angelus and the grey bottle you have posted
You maniac the breds then the Chicago's
Hey my man INSANE JOB just some questions 1. is the deglazer just like acetone? 2. after the matte finish did the paint crack?
@jerry44sneakers
Жыл бұрын
Thanks. 1. Yes 2. Until now paint still not crack.
and i dont want to ruin my jordans but i want to paint it like you
Hey, nice custom! I’m looking to recreate this, so I have a few questions. 1. Did you paint the heel portion that had the heritage red with your mixture of red? 2. Is this mixture of red gonna match the 2015 Chicago perfectly? 3. Would just varsity red be good to match the 2015 chicago?
@jerry44sneakers
Жыл бұрын
Thank you. 1. Yes, I paint the heel portion with my mixture of red. 2. I compare it with my homage to home and it is almost the same. 3. No, varsity red is too dark.
@IbukiClean
6 ай бұрын
@@jerry44sneakersdo u sell these customs? I would definitely cop the Chicagoa if u sell em.
@jerry44sneakers
6 ай бұрын
@ElCuhz yes, but this Chicago is for my client. You can buy one j1 heritage and I can customize for you.
Dude you convinced me this is the best option for a Chicago now but for one thing I’m really new to paint mixture.. Do you know how I actually measure the amount so it’s 70/30 on the red?.. definitely didn’t want 2 different shades so guess I wanna make sure it’s a big enough batch for the pair of shoes. 🙏🏼 thanks a ton yo!. Total noob here about to make the leap though!
@jerry44sneakers
2 жыл бұрын
I just mix approximately. Total of 1 oz is enough.
@yourking18
2 жыл бұрын
@@jerry44sneakers thanks for that man I’ll be giving it a shot now that I got paid lol
@jerry44sneakers
2 жыл бұрын
You’re welcome
Hey! I love these. i defitnly want to try it out. one Question tho. How durable is the paint on the leather? How long can I expect it to last till I need to do a light touch up?
@jerry44sneakers
Жыл бұрын
Mine is 11 months already and still no sign of cracking
Amazing job brother! I have a new pair of these how do I start the process to have you do this job for me?
@jerry44sneakers
Жыл бұрын
Message me on my Instagram @jerickulep
Hi, the aj1 heritage heel and collar are already red, but did you repaint it again with your mix angelus red paint? because i noticed after you finished the customize it's a little darker than the original red of heritage, thank you
@jerry44sneakers
2 жыл бұрын
Yes, I paint it also
@Peterfggfvb
2 жыл бұрын
@@jerry44sneakers did you go around the wings logo
@jerry44sneakers
2 жыл бұрын
No. I only painted the perimeter of wings logo. I didn’t paint the inside. It is not noticeable even not painted.
Awesome job mate, quick question where do you get the new tags from. I am new to the hobby. Thanks
@jerry44sneakers
Жыл бұрын
From Etsy. Here’s the link: www.etsy.com/sg-en/listing/1225686973/j1-sneakers-tongue-tag-chicago-bred-aj1
@modelplanemadness3852
Жыл бұрын
@@jerry44sneakers thanks alot and good job on the video
@jerry44sneakers
Жыл бұрын
You’re welcome. Thanks
😮
How many coats of white did it take to cover the toe? Love the video and the custom came out great!
@jerry44sneakers
2 жыл бұрын
Thank you 6-8 coats
@jorgerivers714
Жыл бұрын
@@jerry44sneakers has it cracked? I did mine and they cracked on the first wear.
Did you paint the heel red even though its already red? Or did the paint colors match well enough?
@jerry44sneakers
2 жыл бұрын
I painted the heel and collar to match the red mix I painted at other areas
Good job on the custom! I have got a couple of questions, when painting the heel did you have to re-paint the Air Jordan symbol over it? Also where did you get the tongue tags from?
@jerry44sneakers
Жыл бұрын
I did not paint the wings logo. I bought it from Etsy
@MrGrass6000
Жыл бұрын
What about the tongue tags?
@jerry44sneakers
Жыл бұрын
I have stock of the tongue tags. Message me on my Instagram @jerickulep
@ticctacc
10 ай бұрын
@@jerry44sneakers keen on the tongue tags if you still have some. Any other ways to get in touch with you aside from Instagram?
@jerry44sneakers
10 ай бұрын
@ticctacc no more already. You can check philsneaker pawn on Instagram. Can message me also on Facebook Jerry44Sneakers
Did you paint the heel and around the wing too? Or does the finish coat make it look a little darker then the original red
@jerry44sneakers
2 жыл бұрын
I painted the heel and around the wing too.
I know you repainted the back part as well. Did you repaint the wings logo as well or just around it?
@jerry44sneakers
2 жыл бұрын
I just paint around it
Awsome Job but im confused as to what the liquid kicks matte topcoat is for and how to apply it?
@jerry44sneakers
Жыл бұрын
It’s matte finisher. Clear coat protects the paint from scratches. Apply 1-2 coats with paint brush.
Will the paint crack with use and if so will the red show underneath? Great job btw
@jerry44sneakers
Жыл бұрын
Already 1 year and still don’t have crack. Thanks.
What did you do for the red ankle portion with the black AJ wings logo? Did you paint over that red intricately between the logo? You didn't show yourself painting it in the video but that whole red ankle panel somehow looks darker/color matched like the rest of the red you painted in the After pictures
@jerry44sneakers
Жыл бұрын
I painted only until the border of wing logo. I didn’t paint the red parts inside the wing logo.
If I messed up on the white toe should I removed all of the white or as mush as I can, because for the rounded corners are hard to remove
@jerry44sneakers
Жыл бұрын
Just as much as you can
Great attention to detail. How can I get the Chicago tongue tag?
@jerry44sneakers
2 жыл бұрын
You can buy it at Etsy
hello, I noticed that while I color the front red part white, the holes are covered and become white, how do I make them visible again now? thanks
@romyvillaluz4101
10 ай бұрын
I think you can use a toothpick.
How does the leather feel after it’s been painted? Can you tell the difference at all?
@jerry44sneakers
2 жыл бұрын
Cannot tell the difference
Is 1oz of angelus red enough for a pair of shoes? When mixing the red paint with 2-thin, is it a 1:1 ratio? Thanks in advance for your help. Also, would using no varsity paint, just the angelus red look better or worse?
@jerry44sneakers
Жыл бұрын
1oz is more than enough. Will you be using air brush? If so, 90% red and 10% 2thin or until like milk consistency. If not, no need to mix with 2thin. Just red paint is still nice, I think.
Hey , the custom is amazing but i wanna ask you that did you use any color paint else with the red color of the heel part and the part has the AJ wing logo(dont know what it called), because after customized it looks kinda better eventhough i dont see any paint on those parts?
@giakhanh3531
Жыл бұрын
hey I know the answer now.
noice
Hey, loved the custom but I wonder which color did you use to mach the red on the shoes? Thank you!
@jerry44sneakers
4 ай бұрын
I used a mixture of 25% varsity red and 75% fire red
@ErickDaBarber
4 ай бұрын
@@jerry44sneakers Thank you!
@jerry44sneakers
4 ай бұрын
You’re welcome
Is the red on the AJ1 heritage the same red on the real Aj1 Chicagos? If it is, then this might be a worthwhile custom to do
@jerry44sneakers
Жыл бұрын
It’s not the same. That’s why I repainted the red parts of heritage to red of Chicago
Nice dude I think I should buy jordan 1 heritage and paint it to chicago but if I touch the shoes will color go on my hands?
@jerry44sneakers
Жыл бұрын
No it will not go on your hands if you deglaze first before painting and put finisher after painting.
@discojackson1234
Жыл бұрын
@@jerry44sneakers alr thanks
@jerry44sneakers
Жыл бұрын
You’re welcome
I have a normal hair dryer which setting should I use hot or cool and how long shoul I dry it each layer thanks
@jerry44sneakers
Жыл бұрын
Hot, few seconds. Until you see it’s dry already
can u tell me how to mix the paint properly? I don’t understand how the 70/30 thing works. Thank u 🙏
@jerry44sneakers
Жыл бұрын
Just approximate. For example, mix 3 drops of varsity red with 7 drops of red.
I’m literally going to do this BROO. I AINT SPENDING 1k 🙅
Did you use any softener in the paint to keep it from cracking when they crease from wearing?
@jerry44sneakers
Жыл бұрын
I did not use any softener
Nice job! Did you paint the outsole, and if you did, how? And how did you paint around the wings logo?
@jerry44sneakers
Жыл бұрын
I did not paint the outsole. I did not paint the inside area of the wings logo
@pauldougherty1612
Жыл бұрын
Thank you.
@jerry44sneakers
Жыл бұрын
You’re welcome
How many layers of matte finisher did you apply if you don’t mind me asking?
@jerry44sneakers
Жыл бұрын
2 layers
For the white toe part should I use a mix of flat white paint with Angelus 2 thin or just the flat white by itself ? I saw a person customize their shoes like that
@jerry44sneakers
Жыл бұрын
Both are ok, as long as you spread your paint evenly and as thin as possible per coat. I think they use that so it easily spread and less chance of uneven painting.
@jerry44sneakers
Жыл бұрын
Angelus 2 thin is usually mix with paint when using air brush to make the paint thinner and will not clog the air brush
How many coats of red did you paint the two back panels ? since I’ve noticed you painted those too
@jerry44sneakers
Жыл бұрын
3-4 coats
How many coats did you apply for the red and varsity mix?
@jerry44sneakers
2 жыл бұрын
4 to 6 coats
Do you recommend painting a shoe at a time or both simultaneously?
@jerry44sneakers
Жыл бұрын
I prefer paint both shoes simultaneously
Did you paint over the original red parts to make it even or did the color just match perfectly
@jerry44sneakers
Жыл бұрын
I paint also
Hi, this was a great project just two questions, firstly, is the ammount of paint you showed here enough for the whole project and is the Angelus 4 coat matte finisher ok aswell? , because you showed a different one in the video. Thanks
@jerry44sneakers
Жыл бұрын
Yes. The amount of paint I showed is enough. Angelus 4 coat matte is good also.
@ulg_shade9317
Жыл бұрын
@@jerry44sneakers Hi thanks for your reply, also, is acetone ok instead of the one you showed? And is 1oz ok instead of 4?
@jerry44sneakers
Жыл бұрын
Acetone can replace deglazer. 1oz is enough.
I'm going to do this custom and was wondering how much paint I should buy 1 ounce for each color or 4 ounces lastly how do you accurately mix the reds to create the red you made. Thanks.
@jerry44sneakers
Жыл бұрын
1 oz is more than enough. I have the Jordan homage to home which is same red with Chicago and just compare with it.
@Landonmnguyen
Жыл бұрын
@@jerry44sneakers do you think it would still work if I didn’t mix the red paint and only just used the Varsity Red collector paint for the shoe
@jerry44sneakers
Жыл бұрын
Varsity is too dark
Using your vid for reference, you remember how many coats you did for the red,black, and white paint?? Thank you!
@3eeaee3
Жыл бұрын
And did you paint the heel white before painting red? Thanks again fam 😆
@jerry44sneakers
Жыл бұрын
Red: 3-5 coats Black: 2-4 coats White: 4-6 coats I did not paint the heel with white. I paint red directly after deglazing
@3eeaee3
Жыл бұрын
@@jerry44sneakers Thanks! Thats a lot of help! 🙏
@jerry44sneakers
Жыл бұрын
You’re welcome
Hey how did u get the finished look on the white paint and the red paint. I’m just wondering cause after u cut away to another part of the shoe the paint looks very finished
@jerry44sneakers
Жыл бұрын
I painted 4-5 coats. I didn’t show the other coats because it will be too long.
Should I go with Matte for the new flat finisher? And where do you find that tongue tag?
@jerry44sneakers
Жыл бұрын
Yes, go for Angelus 4 coat matte. Be sure to shake well before use. I got the tongue tag from Etsy .
The music ruined the video for me.
@PlxnePwxer
3 ай бұрын
frrr
How many layers of white did you use on the toe box? Mine keep cracking 🥲
@jerry44sneakers
2 жыл бұрын
6-8 coats
How’d you get that brush look not visible on the shoe color for the red?
@jerry44sneakers
2 жыл бұрын
By applying thin coats
Jerry what's good bro, I'm trying to correct some of the red on my heritage jordan 1's I'm customizing them to be breds. what is the best color match for the university red on the heritage or would it be best to use your 30 percent to 70 percent ratio you used here.
@jerry44sneakers
2 жыл бұрын
I don’t know the mixture for the heritage red but if you want to use the 30/70 ratio I used in my Chicago customs, just paint all red parts with it so it will be uniform.
@Mxrclxrk
2 жыл бұрын
@@jerry44sneakers okay bet thanks bro, waiting on my paints to be delivered.
@dczed2104
2 жыл бұрын
Do you do customs like this?
@jerry44sneakers
2 жыл бұрын
Yes bro
Did the paint look messy then it dried to look good or did you have to keep painting it
@jerry44sneakers
5 ай бұрын
I keep painting it. 4 to 5 coats
Is the Top coat you use the best for this or would another one be fine
@jerry44sneakers
Жыл бұрын
Another would be fine
Yo, where did you get the nike air tongue tag replacement?
@jerry44sneakers
2 жыл бұрын
From Etsy
How much does the paint least, and If u try to clean them will it erase??
@jerry44sneakers
Жыл бұрын
It’s been 5 months and still ok. It will not erase if you clean them
Did you use a micro brush for the white stitching on the swoosh?
@Evil_Change
Жыл бұрын
or was it just the small brush that comes with the paint brush set?
@jerry44sneakers
Жыл бұрын
I used micro brush
was there any paint chipping or fading after a couple of weeks/months of wear on the toe box area po?
@jerry44sneakers
Жыл бұрын
1 month na, pero wala pa naman sinasabi yung nag pagawa na nag chip or nag fade
@shawnsanjuan7129
Жыл бұрын
@@jerry44sneakers thank you sir Jerry, may mga nakkita kasi ako nag ccustom na nag ffade/paint chip toe box area
@jerry44sneakers
Жыл бұрын
Tingin ko hindi na prep ng maayos yun.
Do you use matte topcoat over everything you paint
@jerry44sneakers
2 жыл бұрын
Yes
how did you make the red color darker?
@jerry44sneakers
2 жыл бұрын
Mix 70% red and 30% varsity red
If you repainted the red on the hell and collar what’s the best way to do the wigs logo?
@jerry44sneakers
2 жыл бұрын
I only repainted the heel and collar. I didn’t repainted the wings logo as it is not noticeable even not painted.
@royalty694
2 жыл бұрын
@@jerry44sneakers oh okay thank you that’s what I was worried about
@jerry44sneakers
2 жыл бұрын
You’re welcome
@royalty694
2 жыл бұрын
@@jerry44sneakers thank you for the help & I watched it again and hand another question; what was the color mix of varsity red to regular red to get the chicago red you used?
@jerry44sneakers
2 жыл бұрын
70% red and 30% varsity red
i did my custom and i ran into an issue. i finished the custom and i wore them and i saw the white paint on the toe box was cracking and showing the red, how do i prevent this
@jerry44sneakers
2 жыл бұрын
Did you prep the shoes before painting?
@Hakka2424
2 жыл бұрын
@@jerry44sneakers yes
@jerry44sneakers
2 жыл бұрын
1. Remove factory finishing by scrubbing cotton pads with deglazer or acetone. 2. Sand with sand paper (optional). 3. Paint with thin coats. 4. Allow to dry ( 15 minutes for air dry, few seconds if using heat dun or blow dryer). 5. Apply 1-2 coats of finisher.
Quick question did you also paint over the red on the herritage with the red paint or no
@jerry44sneakers
Жыл бұрын
I also paint that
@spooktyrone9337
Жыл бұрын
@@jerry44sneakers okay thank you, i missed out on the lost and founds and i aint paying resale. Keep up the good work man you got talent
@jerry44sneakers
Жыл бұрын
You’re welcome and thank you
Oh man, and another question: how can i replicate the red on the heritage? I want to do the chicagos like you did, but instead of repaint the back of a darker red, i want to paint only the front but with that exact red..i hope it makes sense🤣 any advice on the ratio?
@jerry44sneakers
2 жыл бұрын
I don’t know the exact mix for the heritage red but I saw someone use fire red and it looks close to heritage red.
@simonediamante7556
2 жыл бұрын
@@jerry44sneakers thanks for the help my friend i will update you
@simonediamante7556
2 жыл бұрын
@@jerry44sneakers oh and another question mate, do you remember where you see the one painting them with fire red? Or who he was?
@jerry44sneakers
2 жыл бұрын
Here’s the link: kzread.info/dash/bejne/qWeB19ClnpCsobg.html
@simonediamante7556
2 жыл бұрын
@@jerry44sneakers thanks homie!!
You used the deglazer on the jordan wing logo?
@jerry44sneakers
2 жыл бұрын
No. I didn’t paint that area also
Which seller did you get the tongue tag for? Or can you put a link?
@jerry44sneakers
2 жыл бұрын
Philsneakerpawn from Etsy. Here’s the link: www.etsy.com/sg-en/listing/1225686973/j1-sneakers-tongue-tag-chicago-bred-aj1?click_key=662468703ab4c44e9414a8c0eb803fb0bb68c225%3A1225686973&click_sum=15f2e098&ref=search_recently_viewed-1
How much for you to do the same custom on a size 9.5 can ship out
@jerry44sneakers
2 жыл бұрын
$150 USD plus shipping to Singapore and shipping back to your location
How long does the paint stay on for pls anwser
@jerry44sneakers
Жыл бұрын
It’s been 5 months since then and still intact
Where did you buy the red and white tan for the tongue
@jerry44sneakers
Жыл бұрын
I have stock. Message me on my Instagram @jerickulep
How many layers of Red and Black did you do
@jerry44sneakers
2 жыл бұрын
4-6 coats
Hi, where did you buy the tounge tag? Thanks
@jerry44sneakers
Жыл бұрын
Etsy but it’s currently unavailable
how identical does this look to the real pair. is it noticeable?
@jerry44sneakers
Жыл бұрын
Not noticeable. But if you look closely, a little bit noticeable
Hi how much paint do you use? 1oz bottle of each color would be sufficient for both shoes? Do you use a heat gun to make the drying process faster? Thank you and great work!
@jerry44sneakers
2 жыл бұрын
1oz is sufficient. Yes, I use heat gun to dry faster. Thank you.
@1manmob341
2 жыл бұрын
@@jerry44sneakers when you use the matte finish, do you brush by hand or use air brush tool? Thanks 😊
@jerry44sneakers
2 жыл бұрын
I just use brush by hand
@1manmob341
2 жыл бұрын
@@jerry44sneakers thanks for getting back so fast!
@jerry44sneakers
2 жыл бұрын
You’re welcome
How much do you charge? I would like the exact thing done to my heritage 1’s
@jerry44sneakers
Жыл бұрын
Message me on my Instagram @jerickulep
How did you get the chicago tougue tab??
@jerry44sneakers
3 ай бұрын
I bought it from Etsy but it is currently sold out