Bro really dropped the hardest taillight setup and dipped

As a car guy and an engineer, I must say man, YOU DID THAT! I love seeing creativity like this! Good job! Well worth the time and effort. Thanks for the video!

bro predicted the new charger tail lights🚨

Cleanest challenger taillights I've seen. I would like a set on mine. How much?

Out of this world man, seriously. My respects, keep doing what you enjoy. And keep succeeding.

exactly what I was thinking of doing to my old challenger a few years back!! looks great

Holy crap you did it again! These are gorgeous! I already bought the first type you made, which i love! But i will gladly purchase these if you decide to make them again. Please let me know if you decide to start making this type.

Most dope creativity dude. Futuristic type stuff looks clean af!!

This is better than the factory 👏👏❤️🔥

@WINOBOT

2 жыл бұрын

This is how they should've came stock

@badre001

2 жыл бұрын

@@WINOBOT Maybe in the coming years

Amazing work,looks much better than stock

That’s impressive man, good job!!

Can you provide a list of the parts you used for this? I love how these turned out and would love to give it a try

Excellent work!!! Thanks for the video!

They look badass good job bro

That looks GREAT!!!

Mind blowing MOPAR "OVER THE TOP" Badassery!!! If you were in Florida Id pay you to do that to mine...WOW!!

Beautiful work!!! Looks even better than the facelift...

That’s amazing bro! Good job!

Never liked challengers for this particular reason, but dude, this is bad ass! Do this to my charger ASAP!

Wow, good job! Looks OEM.

Strait skills man salute

Didn't think that was going to work but it looks great! Wish I could do something like that for my 2018.

Wow brother!!! That’s beautiful!!! You..... you....... you got a gift my friend...

Wow these are even better! You gotta get these out to sell!!! I need a pair!

It’s amazing bro good job.

Wow man!! That is amazing!!!

This is super awesome!

These are sick. I want these for mine

Great job man look super clean goodshit.

Excellent job

If I could give you more than one thumbs up I would. Could you upload a tutorial on this? Very creative. Looks like the tail lights of the 08 challenger concept car. Infinite thumbs up. Congratulations on your build.

Wow ! Lots of skills

I know this video old but that's dope. I dont got my R/T yet but I want those when I get it in a few months!!

You got my subscribe by this video. Good work !!

would totally buy one plz make these theyre so awesome

Oh man those are beast

@WINOBOT

5 жыл бұрын

Thanks, alot of hard work went into them.

So freaking awesome 😎

Good job bro

Damn, wish I could buy these. Amazing work!

@zionagnew6250

Жыл бұрын

You could buy it Darren.

@unoriginalconten5217

9 ай бұрын

yea darren

this is maness !

U killing so clean

Just ordered this, going to look sick

@esekillerray

4 жыл бұрын

Max can you send me the link where did you get them

@esekillerray

4 жыл бұрын

Max where can I find them ?

@esekillerray

4 жыл бұрын

Or did you email him ?

Beautiful

Looks good

This reminds me a lot of the taillights on the saleen challengers

Wow awesome I wish you could just make a kit with the relays and the lights so we could install them they ate like the concept car

Man thats dope

good job

Holy shit thats perfect.

Awesome 😎👍

Nice !

Had to watch it agin great video thats skills i still would love to have a set if you sale them or charge todo it i still have my challenger but salute good video man looks like it was a good amount of work too.

@WINOBOT

8 ай бұрын

If you were in Florida 👍

Could you make a kit like this for the newer gen challengers?

So you said later on the road I’ve been waiting to see if you would sell them now or is there a link to anything sim

Built not bought nice bro

Amazing work. could make yourself some money!

Take my money how much! I’ll ship mine so you can do it I’m in love with your invention

Would you please share what size and how many resistors you used on this project?

Hey man just checking back in about getting some tail lights made?

@WINOBOT how much would it cost to do this to my taillights? I'm located in Florida. lmk

they look amazing! Do you have to take it apart if one of them goes out? Like reconstruct it again? That would be a pain.

@WINOBOT

2 жыл бұрын

I would have to, luckily none have went out yet.

Damn homie that was some of the dopest shit I've seen. You should make custom ones at request and make money

@WINOBOT

2 жыл бұрын

Thanks, thats the plan!

Main its so dope let me know how can i get some

this shi fire 🔥🔥🔥

Hey brother so I started this project, trying to figure out how you got the middle tail light lens off? Did you Dremel the trunk bezel off from the back and then glue it back?

@WINOBOT

5 жыл бұрын

Dremel it in half then epoxy back together

@markcusga

3 жыл бұрын

@@WINOBOT Good morning. I will be doing a 2014 Challenger build/giveaway next year on KZread and I would love to have you do these custom taillights. Would you be willing to do it, let me know.

Can you get me a cleaner picture of the wiring diagram? And maybe the led strips you used? Gonna attempt this after watching this video I saw the earlier comment on what resistor timers you used the part in the video is just kinda blurry on the diagram, thanks

How fix newer challenger taillights

Dope!!!

Looks good!...... but what did you do about the reverse light(s)?

@WINOBOT

4 жыл бұрын

They're there, just tinted. You can see in the part where I'm painting that I left them clear.

@josephbrickson5952

4 жыл бұрын

@@WINOBOT sir really interested ,how much total price if you make for me

Could you send me a list of things I need to buy to complete this job

im looking i do this to my Challenger but i cant finde the map to do the circuit. how much for sharing me that info??

Super slick looking man. Are you selling these or even interested in selling a set?

Could you give some more info on how to wire all the components? Would love to build something similar for my 2008 srt8. I would like to keep te reflective outer line functional though, since its mandatory here. I see you painted that part black, was that a purely esthetic choice or do you think the reflective edge wont work after sandblasting en sanding? Greetings from the Netherlands.

@WINOBOT

8 ай бұрын

So for the wiring I found it easier to just buy a sequential light kit which is pretty much what I built with the timer relays and diodes in the video. The reflective part can stay and work fine I just painted it for a sleeker looking final product. Although thinking back now I could have just left that part red and just tinted it black and got the same result.

Brahhh i gotta get these on my 14! Clean look. Ever thinking about selling a couple of sets?"

@WINOBOT

5 жыл бұрын

Eventually

I want a set. How much, best taillights I’ve seen

How does it look when reversing(since you removed the reverse lights)?

@WINOBOT

5 жыл бұрын

I didn't remove them, they're there just tinted. They're visible when I back up.

How did you trick the cars computer into having LEDs without having it think there was a missing hollagene bulb. On mine I had left the oem ones plugged in and hid them in the trunk. I made a similar replica to these but water got in through the back center light and shorted out an LED strip.

@WINOBOT

4 жыл бұрын

Resistors

looks goo i know. im sick of replacing light bulbs every 6 months, how long does the leds last?

@WINOBOT

5 жыл бұрын

According to the manufacturer, over 50,000 hrs

NAH for real you the truth for that I need that for my car

Could you tell me what spray cans were used to make the tail light lens to go from clear to an acrylic matte finish? & which ones to use from first to last? I would like to do the same for my lenses on a different car & have that "led lens" look.

@WINOBOT

5 жыл бұрын

That was not spray paint, I sandblasted the plastic.

@KrOnIc343

5 жыл бұрын

@@WINOBOT ok thank you

Thnx for the great video, quick question plz, did u remove from inside the light to fit the corner bead?

@WINOBOT

2 жыл бұрын

Where exactly are you asking about?

@willa5060

2 жыл бұрын

At 0:31 while u r putting the beads, i tried but it doesn’t fit unless i trim from inside the lights housing (the bridge in the middle and in the corner)

@WINOBOT

2 жыл бұрын

@@willa5060 i cut the bead down so the top half of the housing fits if that's what you're asking. But i don't build them like that anymore, i put the bead in upsidedown and screw it to the housing. This assures me that it will never come loose, the epoxy will eventually fail. Whether that's a year or 5, who knows but it will eventually.

@willa5060

2 жыл бұрын

I appreciate the help so much , all the work im doing is inspired from u , thnx alot

I'm very interested in potentially purchasing either version of these taillights. If your still selling some let me know

Thats sic man would you consider doing it for someone if they paid you?

@WINOBOT

2 жыл бұрын

Definitely, I'm going to be selling a limited amount for the first few people that are interested. I'm also going to be doing a giveaway for the ones in the video if I can get to 1k subs but I haven't officially announced that yet.

How much to build me something like that for my challenger 2012?

Did you have to make each bend by cutting the led strip at each angle, or was it a single strip & you somehow bent it or folded the strip over to make a bend/angle? Want to make a solid piece like Oracle makes for this car, but its for a totally different car.....

@WINOBOT

Жыл бұрын

I had to cut for every angle

Next Evo taillights please 🤞🏿

How much for you too make a set for 2012 challenger rt

Hi winobot these tail lights look amazing can you custom make mines for a Evo 8? Let me know 🐎

@WINOBOT

3 жыл бұрын

I got you fam

How do u make the tail lights like fogged up to where the look like the newer tail lights nowadays can someone tell me?

@WINOBOT

5 жыл бұрын

It's in the video, I sand blast them on the inside to get the frosted look.

Hey I know it's a lot of work but I would love it if you could make and sell a few of these. I bought the black strip from Luxe that runs along the lights so I can at least try and not hate them but man I would buy a set of these in a heartbeat!! Please let me know if you decide to build another to sell. 👍

Yo how much will you charge I’ll send my taillights and everything

could you upload a list of parts you used Im trying to figure out which leds you used im about to tackle this project myself.

@WINOBOT

5 жыл бұрын

The important stuff is in the description. I used 3014 led strips.

@antoniocompere1391

4 жыл бұрын

please contact me at eventz9999@gmail.com I would like to do it for me, i will insted of buying the new sequential tail light

I need this on my car. How much to order this light please?

Do you still make these

Wow😍😎

Ok, nevermind. These are the ones I want 😭

One of one

Dope

Hey Winobot, what did you used to mount the leds inside the light? I mean the metal things that you’re cutting at 00:29.

@WINOBOT

3 жыл бұрын

Drywall corner bead

@WINOBOT

2 жыл бұрын

materials list is in the description of exactly everything i used if you want to try to make your own.

@zacsalerno3297

2 жыл бұрын

@@WINOBOT thanks fam. It’s been tough but hopefully mine turn out as good as yours :)

@WINOBOT

2 жыл бұрын

@@zacsalerno3297 I kept getting requests for materials list so I went ahead and compiled it. How far along are you?

@zacsalerno3297

2 жыл бұрын

@@WINOBOT just opening them today. Got em off a junker and had to clean them.

Love your work, it came out perfect, what timer relays did you use? I like the outcome and would like to try it out myself, if you would not mind the info? Thanks and We all want them know.. 316Mopar of Wichita

@WINOBOT

5 жыл бұрын

This is the timer I used rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F190888145497