Custom Built Fishing Pontoon the LUCILLE IV (part 1of4)
Спорт
I built my custom fishing pontoon specifically for catfish fishing on big rivers. Pontoon boats are great fishing boats when probably set up. In. this video Ill show virtually everything you might want to know about this custom fishing pontoon.
Пікірлер: 201
WOW. Definitely makes me want a pontoon. Great build, beautiful boat!!
Hell of a job, gave me some great ideas for a boat build. Thanks and I hope to see more from you.
I like it! Alot of thought went into the build!! You also had the trailer sitting level while hooked to the truck, good!
Everytime I talk to a dealer about a center console pontoon set up spacifically for fishing. All I get are vacant stares. You done it. Nice job.
You did a great job building your boat. I really like it. Be safe!
WOW! You just gave me a thousand ideas for my pontoon build. GREAT JOB!
What a thoughtful build. Great job!
Best setup I've seen yet! Super efficient without all the fluff. Brilliant add on's. Can't say enough good things!! (And I'm one that usually criticises).
NICE boat! Looking forward to more content.
well done! Like the way you improvised the "bait table" and how it is stored and utilized. You are a true cat fisherman. We drift for cats in the summer out of our pontoon. Your setup is spot on!!
Terrific fishing boat, well desinged and laid out for essential needs and Fishing Fun! thanks!
Very nice setup. That Minkota motor that will hold the boat in position is especially an asset. Love all the storage on the boat too.
Very nice ! Thanks for sharing ! Tight lines , safe outings !
Sir this is a very well presented video ... Exceptionally well done my friend on both the build and the video ... Great job 👍👍👍
@johndziadyk8624
4 жыл бұрын
yes …. but where do the females go potty????
That is a well thought out build. Realy nice boat.
Absolutely awesome!
Well done video and great job on building the boat to fit your needs.
Hate to say I’m jealous but ..... I’m jealous. Our Scottish lifestyle doesn’t allow for such warm relaxed living and fishing. Want to go fishing here, you’d better get you’re storm weather gear on and that’s in the summer. I used to live in Zambia as a child ( 70’s - 82) and my dad had what we called a ‘house boat’ It was basically about 10, 50 gallon oil drums welded together to make the pontoons, a wooden deck with fencing all round and a corrugated iron roof. We had a 5mph Seagull outboard and we used to go fishing on the lake. I thought it was the best thing ever. Most of the British expats had similar boats. You’re ‘set up’ would have been regarded as a pontoon for a King. Superb mate.
Amazing build!!!
I like your setup on your pontoon fishing boat!! Good job!!!!
This fella is obviously an expert (probably TIG) welder. Seriously no joke skill level. Dont underestimate value of a skilled welder, especially when it comes to aluminum. Great boat! Let me know when it comes up for sale.
Wow ! What a great boat. Exactly what I always wanted to do.
Sweet Lucy is a dream. Good video,Thank You.
Dang you make me want a pontoon boat now best of every boating world really, love the build!
Best pontoon set up I’ve seen. Love the bait station and how they can be turned around
Best set up on a pontoon i've ever seen! Great Job!
@terrydriggers5217
4 жыл бұрын
Agreed, very nice job.
Nice build, lots of good ideas
I can really tell you put a lot of thought into it... That is a great fishing machine bud!!👍
Awesome rig. I look forward to seeing it in action.
@alfredquinton9593
6 жыл бұрын
Very nice set up, I would add one thing if the budget allowed, minn kota talons they are phenomenal
I like. The pump with a spray nozzle is a really cool thing.
Very nice boat well built thank you for the video
That's one of the best pontoon builds I've seen! You see a lot of fancy "flufftoons" out there, but yours is ultra functional and still clean. I'm getting ready to do some reconfiguring on my 22ft tritoon and this has givin me some inspiration. Thank you!!
@GATORADDAM
5 жыл бұрын
Mid-South Outdoor Life Maybe. But my bank account says you are smarter! Lol.
Very cool video ..Heck of a boat for sure...
Great boat, very well done vid, thanx.
That is a very nice photon , and a lot of though went into it 👍
Great Video thanks Quinton. I’m sure jealous.
I found out the hard way, those hand rails up to the front of the boat lessen the turn radius of your truck. A couple minor crinkles in my bumper and now I get it. Great video!
That trolling motor is awesome!
I did a pontoon boat like this, Still working on it. I went to Arkansas to get this 28 ft party barge. I stripped the deck down and took the bar and console out. Built a center console and extended it out and put a table on the front with storage under it. When closed it is a bench. The center is a live well. Also built a storage across the back which when you let the lid down makes a big bench. Trailer was a little rough and surprised we made it back home. They were putting new tires on it when we got there. Tandem axle and I had to replace 2 sets of bearings and put buddy bearing caps on it. The motor did good first couple times out but them lost a cylinder. 85 hp Force and the power pack is 350 dollars. I had a 70 hp Johnson but needed rebuilt. I found another 70 hp Johnson in Texas and bought it cheap, $120, and only had to put a water pump on it and now I have lots of spare parts. The Johnson not as fast but after changing the prop does good and runs great. Got all my lights done for night fishing and can't wait to try them out. Wind here has been terrible and when it drops below 40 mph I start thinking about going. LOL Always looking for ideas to put on here.
Very cool build.
great boat build
Fantastic vessel!
Super nice design
Best I’ve seen!!! You should mass produce these!!!
awesome build boys !
V E R Y impressive! Nice job
Great Fishing Set-Up! Well Done. Wheel Bearings? That is always the first job.
Never heard of y'all and I'm born and raised in jonesboro but I will sub
Nice job, got a 24’ recently that I would like to do similar. Got my graphs(onix 8 and 10) and an extra ulterra 36v from my bass boat along with two talons( I won’t get crap for them if I let them go with the Boat when I sell it. I really want to do something similar to what you’ve got with heavier rails for sturdier rod holding and flexibility. I was thinking about using a third toon for extra storage. Great idea on the tables, real estate is valuable
Awesome this thing is sick
very nice fishing rig you have done a great job love all the room you have, look forward to your next vid
nice setup I like the grill on the boat like my boat people look at you funny when your grilling and fishing at the same time I recommend some solar panels for charging batteries
Cool toon man.
Love the boat. Well thought out. Simplistic but functional to it's fullest. I'd like to see more of the aluminum square tubing and structure. Very impressive.
@shanebeaudrot777
5 жыл бұрын
@@catfishkarma1 - do you do your own welding? If I had that skill set, I could be more confident in creating lighter weight frame structure vs using wood which doesn't last forever.
@tedsell1455
5 жыл бұрын
take a welding class 🙂
@shanebeaudrot777
5 жыл бұрын
@@tedsell1455 - that's exactly what I'm looking to do. My dad recently bought a welding machine and he said he could show how to use it. I suppose I can still learn a new skill at nearly age 53.
I have seen you turning to go to mud island on my way to work. Made me want to turn around and go fishing
My right ear really enjoyed this
@jcgalmiche8352
4 жыл бұрын
Left ear sounded like a goose entire time.
Holy BLEEP mister! $3K? You scored! May have to have you look for a pontoon boat for me! Ha ha ha. Did very well. BTW that under deck stow, great that its made out of aluminum, is awesome as a skid plate. At least for use in the Pacific Northwest. The ONLY thing that I would probably change &/or add is solid siding (to keep water from blowing onto the deck on windy/choppy days) & removable/stowable seats. Love the setup!
i love your videos my man. i think your boat build is the most fishable boat i've ever seen..i wish you would consider selling detailed material and build plans. keep your videos coming and good fishing
@joecrowder6590
5 жыл бұрын
@@catfishkarma1 after watching every video you have.... " I am on board!" Your hard work has motivated me. I have one question though...... If you built another would it be a tritoon or would you stay with your current build? Thankyou!
@joecrowder6590
5 жыл бұрын
@@catfishkarma1I believe for a fishing rig you are right as usual...lol. Definitely less snagging and hanging the boat up......... Thanks for sharing! Now I just need to find the right rig to get started! 😁
amazing to say the least !
Good show, if you're ever in the Suwannee river, be sure to pull up on our beach. Down from the Music Park.
Sick brother
Nice Video And Boat
Cool boat! Perfect for what you use it for. Thanks for sharing. #Pontoon
Bravo Zulu sir! I really like the custom fit to your needs/requirements. I'm about to start an '87 Bass Buggy "retro" and you have given me an idea or two I did not think of.
I'd love the 18' version of this. Nice!
@catfishkarma1
3 жыл бұрын
👍
Nice job
Lmao at the way they posed with the fish 💪🏻💪🏻💪🏻💪🏻
Loving the design I'm looking at going with a 24 Footer but not to sure if that's the best bet debating on converting it over into a cruiser pontoon to where it has a small enclosed space also with the patio to enjoy on both the front and in the back I'm thinking about doing it this way so that I don't have to invest in a houseboat which really adds an extra expense when you just really want to enjoy the outdoors. Doing this you have that ability with the cruiser pontoon structure. I'm looking to purchase the Pontoon for 1000 or 1500 with no interior and the possibility of no motor being that they don't have the title for the motor and I don't want to get into the issue with purchasing something without the title. Now the trailer is just like yours the only problem with that is,.. it is coming with a bill of sale and a Tx 143 form due to the fact they say they can't find the title. So If I can get some feedback on that that be great thanks.
love it!
@azariahkeith5189
3 жыл бұрын
pro trick: watch movies on flixzone. Been using it for watching loads of movies lately.
@jaydenquentin3232
3 жыл бұрын
@Azariah Keith yup, been watching on Flixzone} for months myself =)
Nice job btw
I was going to ask how many times you had to go swimming after it if the trolling motor didn’t respond! Great video! I love my pontoon fishing boat.
Just starting my pontoon project. Gonna use a few if your ideas. The storage underneath is a great idea. Mine will be used to transport my Honda Pioneer 1100. My pontoon is 31 feet long.
Can't say I've ever seen a video from Jonesboro. Nice boat.
@Oxinder
5 жыл бұрын
Arkansas?
I comment you on all your hard work and attention to detail on your customized pontoon boat. Can please tell me the name again of your automatic boat launcher…that is very nice and saves a lot of time.
I live in the Mountain Home area but I lived 5 years in Jonesboro!
Great design, for what you are doing, wonderful the way you have managed to keep everything secure and out of your way, what did you use for the top, and can you get on the top, are used 3 inch insulated roofing panels for my Sundeck because we get on top of it when we’re cruising, don’t like the short side rails because that Seems to be just enough to trip over
What is your clearance height with the boat on trailer? And height of canopy from deck for wheel house? Would like to see a video of you just measuring everything. Very unique boat, 👍
Incredible boat. Great build. Can you or have to taken this in the ocean? How would it handle out there
I would solar panel the top of the cover and add some more deep cycle batteries because one can never have too much reserve DC power on a boat . I have a 47' Houseboat here in Nor Cal . I have 1500 w of solar panel that maintains a total of 1530 AH worth of 12v DC power. Which is more than I should ever need in any type of situation. I also have a 3500 w gas powered Honda generator that I have actually never had to use.
I bought two of these one for front one for rear for jon boat used about five times now no problems
NICE
Great set-up. I’m not so sure about storing wet anchor line in the same locker as the batteries. I’d worry creating a short and burn the batteries.
Like the boat ! Have you thought of using clear shower curtains around the pilot house for inclement weather?? (Just a thought)
Very Beautiful Boat Sir, I am very interested in that storage compartment you have on the front for your batteries, where can i get one?
Best boat build I’ve seen!!! How much for you to build me one????
@ButterzBBrunsworth
4 жыл бұрын
He is selling it... Lol now's your time to shine
After you built the boat, you shoulshave built a sound system that works.
So, it's been a few years. Anything you would have done differently building the boat? I was surprised you didn't have solar panels for the trolling motor batteries.
I love this boat!! Is all that aluminum brazed or welded together?
Have you considered adding a water glide or a aluminum skin under your boat? I appreciate your build and sharing your experiences. I will be building something similar. PS: When the holiday is over and if you get a break....lol. I live in Wynne and would love to look at you boat if you have time. Thanks again!!!
@joecrowder6590
5 жыл бұрын
@@catfishkarma1 You have done a remarkable job!
the rip tide 2nd man trolling remote control motor is truly bass bad.
Hello sir will you make my boat as same as yours I like the idea and the look it awesome
Interesting about using the transom well for bait or livewell. What is the transom well even used for?
a very excellent design and lots of creativity, well thought out, well constructed, and a craft to be admired,,,,,,,however,,,,i have NO need to do fishing and cant use it.....having said that,,,id like to have you help me think through and construct a pontoon boat for family riding and funning,,,,,thanks for the post
Our family likes Craighead Forest Park. We camp there a lot.
@mikeelder9263
5 жыл бұрын
No, I haven't. I was browsing and noticed that you were videoing in Craighead Forest Park in Jonesboro.
Great job man. I’m guessing your a pretty good aluminum welder. I’ve been looking at pontoon boats. I never thought about restoring one. I’m retired so I think that would be a great project.
@catfishkarma1
3 жыл бұрын
I get by. 👍
I just bought a pontoon boat to fix up. What item should I get first a jack plate, trolling motor, or a minn kota 12ft anchor, I can only afford 1. Your video inspired me to buy a pontoon boat. Thanks.
AWWWsome
Man this is awesome idk how you channel came on my feed but I’m glad it did! Man if you don’t mind how much total did you put into this build from the initial 3k for boat and trailer to all the kids you did to it?
love the idea and boat. just not the bomb part. great video