Curved Epoxy Resin Table Lamp | Epoxy Resin Art
Тәжірибелік нұсқаулар және стиль
I am making a simple curved epoxy table lamp using olive and walnut wood.
On the lamp, touch on/off button and 12V daylight LED are used.
Mirka Autonet sandpaper was used during the sanding phase.
Mirka Polarshine 35 and Mirka Polarshine 10 were used in the polishing process.
If you liked the video, don't forget to like and subscribe to the channel to show your support.
Thanks for watching.
If you want to buy the products I made, you can check out my Etsy shop:
theatasoy.etsy.com
Instagram ➡️ / atasoy_59
Pinterest ➡️ / atasoy_epoxy
*These videos are meant for the purposes of entertainment. Any attempt to imitate or copy what I do must be done at your own risk, my practices may not always be correct or the safest. You are responsible for your own safety while woodworking. Read and understand the operation and safety manuals supplied with your tools and machinery to ensure you are safe while using such equipment.
#epoxylight, #epoxylamp, #epoxyresin, #epoxyresinart
Пікірлер: 163
Gorgeous as always I love how your mind works.
@atasoy
10 ай бұрын
Thank you very much🙏👍👍
Beautiful!🥰💕💕
@atasoy
10 ай бұрын
Thanks 🙏👍
Your work is always impressive. Thank you.
@atasoy
8 ай бұрын
Thanks I'm glad you like it.🙏👍👍
Beautiful piece.
@atasoy
10 ай бұрын
Thanks 👍
Belíssima peça.
You make unbelivable work... Pure art!
@atasoy
8 ай бұрын
Thank you very much, I'm glad you liked it.🙏👍
Me encantan estos trabajos. El proceso es muy interesante.
Incredible work 👍👍
@atasoy
10 ай бұрын
Thanks 🙏👍👍
Very cool idea
@atasoy
10 ай бұрын
Thanks, I'm glad you like it.
Stunning 🎉❤
@atasoy
10 ай бұрын
Thanks ❤️🙏👍
Belle réalisation, comme d'habitude
@atasoy
10 ай бұрын
Merci beaucoup 🙏👍👍
😍 Nice video, i love it
Incredible…. When you first hit the resin with your 80 grit bench sander, I thought that would be it! Incredible to see by working through the grades how you got it glass clear. Impressive!
@atasoy
10 ай бұрын
Thank you very much, I'm glad you like it.
Que lindo trabalho ❤
@atasoy
10 ай бұрын
Obrigado fico feliz que tenha gostado👍
Un hermoso trabajo, gracias por compartir. Mis felicitaciones por el buen gusto y la dedicación
@atasoy
10 ай бұрын
Muchas gracias, me alegra que te guste.
Amazing ❤
@atasoy
9 ай бұрын
Thanks ❤️
Woww nice
@atasoy
10 ай бұрын
❤️😉
Комментарий в поддержку канала и ролика, а также труда мастера....
@atasoy
8 ай бұрын
🙏👍👍
*una obra de arte* 😎😎
@atasoy
10 ай бұрын
gracias 👍
great job man, this was a tough one!
@atasoy
10 ай бұрын
thanks 🙏👍
Can a suggest a night light kind of aquarium build with moving fishes? Perhaps you can use a shaft and cogwheel made out of resin. That will be a gorgeous build! It will be challenging but rewarding.
Bu tasarım gerçekten çok iyi elinize sağlık 💯
@atasoy
10 ай бұрын
Çok teşekkür ederim 👍
amazing❤
@atasoy
10 ай бұрын
Thanks 🙏👍
très sympa comme toujours !
@atasoy
10 ай бұрын
Merci beaucoup et merci beaucoup de m'avoir toujours soutenu.❤️🙏🙏
@corinnecudicio9405
10 ай бұрын
@@atasoy 😉😊👋
Very nice design & build!!! Fiber optic cables maybe worth exploring for future projects.
@atasoy
10 ай бұрын
Thanks, I'm thinking of doing something with fiber optic cables, let's see what kind of project I will do about it in the future, I'm wondering too.
Brilliant work! I don't know anything about this stuff but I love watching and understanding it! You're vid was helpful! =).
@atasoy
9 ай бұрын
Thank you very much, I'm glad you like it.
@afriend8961
9 ай бұрын
@@atasoy One more question; where did you buy the light from? Is it sold exactly as you purchased (touch button/strip/anything else)? Sorry! This one is not a touch button. But I'd like to buy the exact same set-up you have to try this out! Thanks! =).
@atasoy
9 ай бұрын
a.aliexpress.com/_EJwuRAJ a.aliexpress.com/_EzkhBmR
Дуже гарно❤
@atasoy
10 ай бұрын
Дякую 🙏👍👍
Sehr schöne Tischleuchte. 👍👍👍
@atasoy
9 ай бұрын
Vielen Dank.👍👍
@kairohmann4350
9 ай бұрын
@@atasoy Danke auch. 👍👍
gerçekten çok güzel, eline sağlık❤
@atasoy
10 ай бұрын
Çok teşekkür ederim beğendiğinize sevindim 🙏👍👍
Eline sağlık çok güzel 🙏
@atasoy
10 ай бұрын
Teşekkür ederim 👍👍
It would be really cool to introduce some laser sources on one end of it beings criss crossing in the resin. unidirectional coherent light source dont give that effect. I am inspired to try this but not sure if I go epoxy route, too much work, I will try with acrylic sheets. I know it does internally reflect lasers quite well and if you do frosted, it would feel likes its glowing. Really cool project!
Nice
@atasoy
10 ай бұрын
thanks 🙏👍
çok beğendim eline sağlık ❤
@atasoy
9 ай бұрын
Teşekkürler, beğenmenize sevindim. 🙏👍👍
Sen bir sanatkarsin başkan❤❤❤
@atasoy
10 ай бұрын
Eyvallah başkan 🙏👍👍
If I wasn't broke I would 100% buy these masterpieces. Amazing work as always!
@atasoy
10 ай бұрын
Thanks I'm glad you like it
Elinize emeğinize sağlık 👍
@atasoy
10 ай бұрын
Teşekkürler 👍👍
Good
@atasoy
9 ай бұрын
Thanks
Beautiful, if you ever start sell them sign me up for one, after the wife see it most likely two more, lol.
@atasoy
10 ай бұрын
Sold
Kullandığın epoksi tür ve markalarıyla ilgili de video yapar mısın
Çok güzel 🎉
@atasoy
10 ай бұрын
Teşekkürler 🙏👍
Very nice indeed. I’ve been a woodworker for over45 years and have worked with epoxy for many years. Its not my favourite thing to use with wood although I understand it can mean using pieces that would otherwise be fire wood. However, your use of epoxy is imaginative and clever. Many congratulations.
@atasoy
10 ай бұрын
Thank you very much, I'm glad you like it.👍👍
Как декоративный элемент,красота. Как лампа фигня))
Excellent as always. I didn't get how you installed the button
@atasoy
9 ай бұрын
This circuit is magnetically tactile. Thanks to this, it acts as a touch button very easily inside or behind wood and similar materials. After the necessary electrical connections are made, all you have to do is to position the round small copper plate at the end of the circuit in a suitable place. aliexpress.com/item/1005004755138866.html
What is the small printed circuit board you are using both here and on the heart? You've given me a great idea for my next project. Thanks.
@atasoy
9 ай бұрын
This is the circuit that acts as a touch button. a.aliexpress.com/_Ey5DSPh
Hello, I really enjoy your work ❤️❤️👏 May I ask what you do so that the resin does not scratch easily?
@atasoy
5 ай бұрын
There is no method I currently use.
@Afra_light
5 ай бұрын
@@atasoy thank you so much...🙏🌷🌷
🌬🔥
Great lamp but what paper did u use to make rhe mould
@atasoy
6 ай бұрын
Thank you, I'm glad you liked it. I used cardboard. I covered it with clear tape to prevent the epoxy from sticking.
@anmolrana3428
6 ай бұрын
@@atasoy thanks
Amazing! Well done! Could you tell me please where can I buy this touch device switch on/off?
@atasoy
9 ай бұрын
Thanks 👍👍 a.aliexpress.com/_EuFyOIx
@rlmangili
9 ай бұрын
thanks a lot@@atasoy
Super boulot, c'est très beau ! Il s'agit d'une simple feuille de papier (cartonnée ?) qui te permet de faire le moule de la forme où tu verses la résine époxy ?
@atasoy
8 ай бұрын
Merci, je suis contente que ça te plaise. Oui, j'ai utilisé une simple surface en carton comme moule en la recouvrant de scotch transparent.
@nico77
8 ай бұрын
@@atasoy Merci pour la réponse et l'astuce :)
Beyaz renkte kesip kalıp yaptığınız kalın kağıt mı? Nedir? Emeğinize sağlık, diğerleri gibi çok iyi👍🏻
@atasoy
9 ай бұрын
Mukavva karton
how do you cut so easy with the band saw? every time i try, with a fence or not. The blade wants to start curving. Every single time. Please help if you can.
@atasoy
10 ай бұрын
The video is accelerated while using the saw, please take this into account. If your saw wants to go left and right while cutting, the saw teeth are deformed, you should either sharpen the saw or install a new one.
Genuine question: wouldn't it be better to try to insert an LED inside where epoxy meets wood? Drill a hole in the wooden piece or smth. And probaly a couple of tiny ones for ventilation purposes. I've got no idea if it would work but I suspect it may fill the epoxy part with light in a slightly more natural way and instead of redirecting it would start emitting light. But you won't be able to place many LEDs there of course...
@atasoy
10 ай бұрын
In my previous works, I applied lighting as you mentioned, in this work I wanted to try such lighting. Thanks for your recommendation.👍👍👍
Ottimo video illustrativo. Complimenti per il lavoro e per la buona idea semmplice ma molto interessante , come il resto dei tuoi progetti. Ti chiedevo se era possibile avere qualche link o nome del tipo/marca di resina che hai usato . Grazie!
@atasoy
3 ай бұрын
Grazie mille, sono felice che ti sia piaciuto. La marca di resina che utilizzo è Resinin. Condivido il collegamento al sito web. resininresin.com/
What material do you use to make the frame?
@atasoy
6 ай бұрын
I use cardboard and cover its surface with transparent tape.
Здравствуйте, подскажите, сколько затвердевает эпоксидная смола?
@atasoy
7 ай бұрын
24 часа. Время высыхания эпоксидной смолы зависит от типа используемой эпоксидной смолы, ее количества и температуры окружающей среды.
How do you prevent the resin from sticking to the wood base?
@atasoy
9 ай бұрын
I cover the floor with large clear tape.
Elinize sağlık dokunmatik switch butonun linki var mı hocam?
@atasoy
10 ай бұрын
Teşekkürler, linkini paylaşıyorum ama şuanda aliexpress tarafından türkiye'ye gönderim sağlanamıyor yazıyor. Eğer satıcı ile özel olarak mesajlaşırsanız size gönderim sağlayabilirler. a.aliexpress.com/_ExfIiCB
Hi, Mind blowing, Would you pl let me know, R you selling these products
@atasoy
10 ай бұрын
I add the products from the videos to my etsy store so that my viewers can buy them. theatasoy.etsy.com
@SanjeevSharma-yq6qd
10 ай бұрын
@@atasoy great, will see
@SanjeevSharma-yq6qd
10 ай бұрын
But I want directly from you so that I can resell at my shop
Hallo, vergilb es mit der zeit oder ?
@atasoy
9 ай бұрын
Es besteht die Möglichkeit, dass es nach sehr langer Zeit etwas gelb wird. Dies hängt von der Harzqualität des Herstellers, dem Handwerker, der das Harz hergestellt hat, und der Zeitdauer ab, die die Lampe dem Sonnenlicht ausgesetzt ist.
Elinize sağlık , kalıpta kullandığın beyaz malzeme nedir
@atasoy
6 ай бұрын
Teşekkürler, beğendiğinize sevindim. Beyaz mukavva, yüzeyini ise koli bandı ile kaplıyorum.
6 ай бұрын
@@atasoy teşekkür ederim cevabınız için , bir de dökeceğiniz ağırlığı nasıl hesaplıyorsunuz acaba ?
@atasoy
6 ай бұрын
Hacim hesabı yaparak bulabilirsiniz. Ben yapacağım modelleri bilgisayarda taslak olarak çiziyorum, düz olmayan parçalarda kalıbın hacmini yaklaşık olarak çizdiğim program sayesinde buluyorum. Hacmini bulduğunuzda çıkan rakamı 1.05 ile çarparsanız daha net ağırlık çıkacaktır. Küp, dikdörtgen, silindir, koni ve küre kalıplarınız için online hacim hesaplama sitelerinden yararlanabilirsiniz.
6 ай бұрын
@@atasoy teşekkür ederim, benim de aklıma geldi de yine de daha iyi bilene sorayım dedim. Solidworks de çizip oradan dediğiniz katsayı ile çarparak kullanabilirim o zaman, teşekkürler
@atasoy
6 ай бұрын
Rica ederim kolay gelsin.
What's the tool you used at 6:20? Love the video.
@atasoy
6 ай бұрын
Dremel 4000 engraving machine.
@Nightman-eb8mj
6 ай бұрын
@@atasoy Thank you!
Merhaba, etsy de sattığınız ürünlerinizi hangi kargo ile yurt dışına gönderiyorsunuz? Maliyeti ne oluyor?
@atasoy
10 ай бұрын
Merhaba, navlungo.com ile gönderiyorum. Siteye kayıt olarak paket desi si ve gönderim yapacağınız ülke için fiyatları teklif alma ekranından öğrenebilirsiniz.
@beykana
10 ай бұрын
@@atasoy teşekkür ederim
@atasoy
10 ай бұрын
Rica ederim
it's really nice. I think it would be better if you sandblasted the crystal
@atasoy
7 ай бұрын
Thanks, I'm glad you liked it. I don't understand what you mean by sandblasting the crystal.☹️
@majidsaeidi7760
7 ай бұрын
@@atasoy Sorry, I thought it was some kind of crystal or glass but when I re-watched the video I realized it was epoxy resin. In my opinion it will be better if you made it blur. You can do this by sandblasting or maybe using sandpaper. This helps the light spread better like a diffuser.
@atasoy
7 ай бұрын
Unfortunately, this process creates a very bad appearance in epoxy. Sandblasting or sanding will make the surface look very bad. Your advice is very valuable to me, thank you very much for expressing your opinion.
ton interrupteur et digital ? peux tu mettre un lien pour l'obtenir merci
@atasoy
8 ай бұрын
a.aliexpress.com/_EHyJCyL
First view first like Pls reply sir
@atasoy
10 ай бұрын
Did you have a question, what do you want me to answer?
How does the switch work?
@atasoy
8 ай бұрын
This is a proximity sensing circuit that works like touch. After making the necessary connections and positioning the round yellow copper plate and the circuit, it is ready for use. It detects from behind the wood up to approximately 2 cm. (I only tested it on wood, I did not test it on other materials such as metal or plastic.) It has a very simple structure. One-touch on-off, and long touches change the brightness of the light.
@SamNetik
8 ай бұрын
🤯
@atasoy
8 ай бұрын
I guess you are not satisfied with the answer. What exactly are you wondering?
@SamNetik
8 ай бұрын
@@atasoy no I am satisfied, it just blew my mind as I don’t know anything about electronics
@atasoy
8 ай бұрын
I am sharing the product link. The connections are shown in the picture.
O dokunmatik düğme ahşapın altından nasıl algılayabiliyor
@atasoy
8 ай бұрын
Teknik olarak bilmiyorum. Bu düğme prensibinden çok yakınlık uzaklık mantığı ile çalışan bir sensör sanırım.
What is the value of this beautiful work?
@atasoy
10 ай бұрын
theatasoy.etsy.com
кривовато, но как декор сойдёт
Sevgili kardeşim.Tamam güzel yapmışsın tebrikler ama bu şekil nedir?Birini yada birşeyi mi temsil ediyor???Hayır eğer temsil etmiyorsa bence olmamış.Şekil çok kötü yani.Tamam işçiliğine diyecek lafım yok ama şekilin ne olduğu anlaşılır değil.
@atasoy
10 ай бұрын
Birini veya birşeyi temsil etmiyor, evet çok kötü olmuş.
I'm up all night to get lucky
Man why freakn background music nonsense...
Epoksi döktükten sonra herhangi bir çatlak olmamasını nasıl önlüyorsunuz?
@atasoy
7 ай бұрын
Nasıl bir çatlaktan bahsediyorsunuz anlayamadım.
@ekremmuran
7 ай бұрын
@@atasoy Bazı epoksi kullanıcıları çatlak oluşmasın diye basınçlı bir kutuya koyuyolar.Oyüzden sordum.
@atasoy
7 ай бұрын
Basınçlı tank kullanımı baloncuk oluşumunun minumum seviyeye indirmesi içindir. Vakumlamaya alternatif olarak kullanılmaktadır.