Cupra Formentor tutorial Oem rgb smartphone compartment light

Комедия

Come da titolo vi mostro la procedura di installazione della luce led rgb controllabile insieme a quelle superiori delle portiere, ho scelto infatti di poterle gestire non insieme a quelle inferirori della portiera ma a quella superiore;
Durante l’installazione, scollegherete la presa passacavi e vi sconsiglio accendere il quadro mentre scollegata perché avrete tantissimi errori, non riscorso se la spia airbag appaia anche se non accendete il quadro, in ogni caso tutto va ripulito tramite scansione OBD11 e torna tutto alla normalità.
Vi riporto:
- codice luce OEM che si comporta come le superiori 5fa947355J cambierà di colore anche ad apertura porta
- codice connettore maschio per collegarvi alla luce OEM
a.aliexpress.com/_EwRlqll
- codice connettore per collegarvi al connettore originale della luce già esistente
a.aliexpress.com/_Ezj8HoP
- link primo video in cui modificavo luminosità e potete vedere fasi di smontaggio
• Cupra Formentor Upgrad...
- link pin maschio e femmina
a.aliexpress.com/_Ex1lVeT

Пікірлер: 22

  • @fabiosecci4634
    @fabiosecci4634 Жыл бұрын

    Dai dai manca la retroilluminazione pulsanti clima.... comunque Top

  • @giuseppearmranrandone5726

    @giuseppearmranrandone5726

    Жыл бұрын

    Per quella non riesco 😭😭 o per lo meno non me la rischio a smontare il mio infoteniment, mi servirebbe un display sul quale provare a fare esperimenti, più che altro un display sul quale far pratica di apertura

  • @fabiosecci4634

    @fabiosecci4634

    Жыл бұрын

    @@giuseppearmranrandone5726 certo... difatti non si trova uno stralcio di guida per quella operazione. Ho comprato il manuale officina Formentor in pdf e non sembra ci sia. Se ti serve te lo giro

  • @giuseppearmranrandone5726

    @giuseppearmranrandone5726

    Жыл бұрын

    @@fabiosecci4634 no no ti ringrazio, nel manuale officina trovi come smontarlo e per quello non ho problemi, il problema è invece nell’aprile il display, la “pulsantiera” ecc e questo ovviamente non rientra nelle fasi di smontaggio che trovi nei manuali

  • @bartomiejboryca2798
    @bartomiejboryca2798 Жыл бұрын

    Hi, how hard is to add ambient light to panoramic roof? VW Tiguan has it as far as I remember. My VW Golf 8 has a lot of ambient I wish Cupra has it as standard

  • @giuseppearmranrandone5726

    @giuseppearmranrandone5726

    Жыл бұрын

    it all depends on the type of installation you want to perform, do you want the light to be rgb that changes color together with that of the doors or the dashboard or is it enough for you to be white like the rectangular ones of the ceiling lights?

  • @bartomiejboryca2798

    @bartomiejboryca2798

    Жыл бұрын

    ​@@giuseppearmranrandone5726 I would love to have it in sync with factory rgb ambient. Can I take signal from door ambient and connect it to aftermarket rgb? not sure if controller will be compatible

  • @giuseppearmranrandone5726

    @giuseppearmranrandone5726

    Жыл бұрын

    @@bartomiejboryca2798 no, it can't work as you say; you have to reach the LIN cable up to the sky, you have to place an optical strip and use the original led to light up the optical strip, you also have to power the led from a 12+ it's a mass

  • @bartomiejboryca2798

    @bartomiejboryca2798

    Жыл бұрын

    @@giuseppearmranrandone5726 Thanks for your knowledge. In my Golf MK8 I have rear ambient light in door, and also in foot area. If I upgrade Formentor with OEM ambient light from Golf in rear door, and also foot area will it work? I could take signal from front door ambient, to sync colours. Is it possible? What are your thoughts?

  • @computerall1203
    @computerall1203 Жыл бұрын

    Could you do a tutorial to have the foot lights with RGB and controllable via infotainment please?

  • @giuseppearmranrandone5726

    @giuseppearmranrandone5726

    Жыл бұрын

    it is not yet possible to install the rgb platform lights; to be more precise, they could be installed in the same way in which I carried out the work on the smartphone compartment but the brightness adjustment function that now appears on the infotainment would be lost and you could therefore adjust them not independently but together with the door lights or lights dashboard. it is necessary to find the coding via obd11 to add the function and to make the new leds compatible with the LIN system of the car, in fact I tried the rgb lights of the VW platform and they are not recognized

  • @romeole40
    @romeole40 Жыл бұрын

    How Do you have purple colour in individuel to choose?

  • @giuseppearmranrandone5726

    @giuseppearmranrandone5726

    Жыл бұрын

    I have h58 infoteniment

  • @giuseppepalermo1874
    @giuseppepalermo18744 ай бұрын

    Le luci led dell abitacolo sono di serie?oppure è un optional a parte?

  • @giuseppearmranrandone5726

    @giuseppearmranrandone5726

    4 ай бұрын

    Luci ambiente di serie su tutte, al vano smartphone esce di serie bianca e io l’ho convertita come le altre, alle portiere posteriori esce buia e io le ho fatte uguali alle anteriori

  • @GIANNUSACARMELO
    @GIANNUSACARMELO9 ай бұрын

    Ciao, sai come introdurre le luci color viola nel sistema infotainment?

  • @giuseppearmranrandone5726

    @giuseppearmranrandone5726

    9 ай бұрын

    Ciao purtroppo se hai H56 in giù, ad oggi non è possibile

  • @GIANNUSACARMELO

    @GIANNUSACARMELO

    9 ай бұрын

    @@giuseppearmranrandone5726 non sai nemmeno cosa è possibile fare?

  • @giuseppearmranrandone5726

    @giuseppearmranrandone5726

    9 ай бұрын

    @@GIANNUSACARMELO andrebbe sostituito infotainment da H56 a H58 un casino

  • @reneks5456
    @reneks54568 ай бұрын

    Got a formentor too, but mine hasnt the color Purple........ :/

  • @giuseppearmranrandone5726

    @giuseppearmranrandone5726

    8 ай бұрын

    all formentors with infotainment prior to h58 cannot have purple

  • @reneks5456

    @reneks5456

    8 ай бұрын

    @@giuseppearmranrandone5726 how can i become purple? :)

Келесі