At some point I have to make this happen. Instead of getting the 2.8 I just put 10k into the XJ for a Colorado trip with my dad, he couldn't give us a vacation so I'm giving him one. He loves camping and wheeling and his health is going so it was kind of a rush job. Soon I will grab another Jeep and put this in. I can't wait to get this!

I’m glad they finally did this. I always wondered how it came packed, how big was the box, could I leave alone until ready to install,etc. Great job!

@thegrizzlydude

3 ай бұрын

😂😂😂😂

Great overview. It answered a lot of questions. Thanks

Great Video. Congratulations. I am amazed about the endless possibilities with this engine. Thank You

Great video...Nicely laid out and explained...Thanks!

Cummins is great......have one in a motor home but to be truly unique I would want a 2 stroke Detroit Diesel all mechanical no electronics. There are a lot of them out there salvaged from stationary generators and pumps. A lot of folks have re-powered pickup trucks with DD's.

I came here from DeBoss. Give them one so we can see how to ACTUALLY install one.

@lloydbrewer4229

3 жыл бұрын

100% man,. I'm thinking of putting one in an old Jeep J10 4x4 truck. I'd love to "DeBoss" do a swap/install. Cheers

@ShainAndrews

Жыл бұрын

Where?

@sabrinafrankenfield4966

Жыл бұрын

😂😂😂

Australia loves the 2.8!

This looks like a great kit

great presentation thanks

Cummins its really cool you went in this direction...must be pretty flush with cash since you set up international and got them out the market

just ordered mine!

@CumminsEngines

6 жыл бұрын

Welcome to the Cummins family! We'd love to follow your rebuild. If you're active on Instagram, tag your photos with #CumminsRepower and we might share one or two photos of your build with our @Cummins and @CumminsRepowerOfficial followers!

@dannyantrim3546

5 жыл бұрын

Cummins I got to know is that engine a pushrod engine or is it based off of 6.7 Cummins or could it be based off something else please comment in this section and tell me I want to know

ビジネスとは言え、小型商用車愛好家の気持ちにしっかりと応える識別眼を持ってるカミンズに胸熱だぁね☆

I’m still rocking a 12 valve!

@DEBOSSGARAGE

6 жыл бұрын

Me too!

@superkittybtc

5 жыл бұрын

Yeah boi!!!

@1STGeneral

5 жыл бұрын

91.5 12 valve ve pump 300ish at the wheels thanks Shield diesel

@gregorykingsley4338

4 жыл бұрын

98 12 valve! Would love to put one of these 2.8 into a little pickup

Gosh. That's sexy. Unboxing a crate engine. Nothing finer than a Cummins diesel.

You guys should provide ecm mapping software for upgrades . Thats why your 5.9 series engines are so popular no matter the generation they can be tuned.

Nice!

Heard of bed in a bag...but this is much more fun

Cummins rocks.

I know it is "rated" for a 4000 pound jeep - but with a few power adders/retune could it manage in a 4300 pound truck? Looking to repopwer my 69 GMC into a diesel and figure this would be perfect! The specs loosely match the stock 305 that is in the truck now....

Im honestly considering on swapping one of these in my uncles chrysler imperial to make it a daily driver. It seems like it would get good mileage and get the car up to highway speeds without an issue. I wonder if you can bolt it up to a torqueflite transmission. He doesnt drive fast anyway so this would be perfect!

Very cool 👍 I want a Subaru Diesel Cummins 😃

She's definately nice eye candy. Engine looks good too.

if you wanted to swap one of these into a obs chevy tahoe or a half ton pick up is that too much truck for this engine?

Where can I purchase the universal chassis side harness? I got in a wreck and damaged mine to the point it would be easier to just replace it.

I'm thinking of replacing the Cummins in my gen set. Is there one made for that ?

That's so pretty.

what automatic transmission would suggest with this engine

What if you're using a pre-diesel-emissions vehicle, can you remove the EGR/CATS and tune them outta the ECU?

I am building a 1949 F1 and want to put a 2.8 Cummins. My only concern is that if I purchase the motor it's going to take me over 90 days to finish the build and the warranty will expire before I can even get the truck up and running. It would be nice if the warranty was based on engine hours or someway to allow us to build our projects and have the warranty start when we actually start using them. That is the only reason I have not purchased mine yet.

@holmes1956O

5 жыл бұрын

Mr Chuntaro good point is someone at cumins listening

@brittanyhuesman6234

5 жыл бұрын

Warranty has been extended to 2 years, 2600 hours (still parts only)

what AC compressor is used with the kit and can hydroboost be used with the existing power steering pump?

Will this fit in my Rubi JL?

I wanna use this for my 06 Ram 1500. It currently has a 5.7 and I definitely want something more fuel-efficient and unique. My guess is I'd have to source a GM transmission, but that's ok. It's a dodge so I guess you could call it "preventive maintenance".

@ShainAndrews

Жыл бұрын

You any good at math?

Will this fit in the back of a DeLorean?

I would love to swap one of these into my 98 4Runner but I seem to be having trouble finding information on a automatic transmission to pair with the engine, any suggestions?

Will you program an 1800rpm idle if we request? I want to repower my generator with a new reliable engine and this one is in my budget.

I would love to do a project with this engine one day. However, I don't have the tools, the car to modify (in my project, it wouldn't be a jeep or Land Rover), the experience, or let alone the income to do all of this. One day though, one day...

How much for just the wood crate? That would look great in my living room.

Would this be a good replacement for a 4.7L ram 1500 engine?

@johnpitcock5608

5 жыл бұрын

I want to put one in my 4.7 AWD durango for a daily

I live in Connecticut, where vehicles have to do inspections and emissions, Is the version out yet to go into my 2006 Jeep Wrangler yet? I know it was in the works, but the first version only was good through years 1999 jeep wrangler tj legally.... Waiting anxiously to get one,, but it must be legal, unfortunately...

@nevileasterling648

4 жыл бұрын

Can you use a vehicle 25+ years old and get away with emissions in your state?

Is there a finance plan to get the engine because some of us aren't made of that kind of money to drop all at once ? but would be able to pay it off in payments.

@KurNorock

4 жыл бұрын

If your credit is decent get yourself two credit cards with decent credit limits. Get them from large banks so you can take advantage of a specific deal. Discover card is very generous with their credit limits. Here is the trick. It works, I've been doing this for the last 7 years to avoid paying any interest. Make your purchase with one of the cards. Get online, or call your other credit card company and ask them for their balance transfer promotion. Usually this involves paying no interest for a year or even 15 months. Transfer the balance to the second card and pay it down as much as you can while you have your zero% interest rate. Then after the 12 or 15 months, simply transfer the balance back to the first card using their balance transfer promotion.

@gwolf7716

4 жыл бұрын

A personal loan from your bank would be preferable to the CC trick since there is always a several percent transfer fee for the “0%” interest rate and funky fine print.... A day late and the rate jumps to mobster levels guaranteed. I’d think Cummins would eventually assist with financing much like buying a trailer or motorcycle/ATV.

@KurNorock

4 жыл бұрын

@@gwolf7716 The transfer fee is usually only 3% or less and it is a one time charge. A personal loan from a bank is going to be not only a higher interest rate, but also will charge you every month. And you shouldn't be worried about making a late payment. You should be paying all your bills on time anyway. And even if you don't have the money to make a payment one month, you can always just make the minimum payment that month and you are fine.

@csxconductor100

4 жыл бұрын

Yes save your money for a year and pay 0% interest

@JasonY02

3 жыл бұрын

Just put so much in a different account till you have the amount to pay for it.

Would this motor be a decent replacement for the avg V8 in a 1/2 ton (Ford/Chevy/Dodge) pick-up truck and still be able to tow our weekend toys (boat, (two)horse-trailer, car-hauler etc)?? Or should we wait on the tba next Cummins Repower engine? What displacement might that tba motor be?? Thanks!

@roboto204

6 жыл бұрын

if you look at it it has about 30-40 less HP (around 160 while a stock 70's 305 is about 200), but I heard they can be relfashed to about 200 HP with obviously more torque (looking at putting it in a 69 GMC)

@holmes1956O

5 жыл бұрын

scott web horsepower doesnt mean anything in a diesel look at the torque numbers and the torque curve way fatter than gas

I would like to tow with this motor. What rpm would you recommend for towing a 5000 lb trailer at 55 mph? Thanks

@JasonY02

3 жыл бұрын

Don’t forget what gear ratio do you have

What about swapping one of these in an XJ, would I need to change to a standard transmission and what years would it work in?

@MegaSpazGaming

4 жыл бұрын

Advance Adapters sells bellhousings and flywheels that can adapt to most jeep and gm transmissions.

@Nothingtoya

4 жыл бұрын

@@MegaSpazGaming Since I made this comment, I've bought a 5 speed 95 Jeep Cherokee.

Hi would this be a replacement for my 2008 jeep wrangler with v.m 2.8 crd?

You guys need to make a 6 cylinder version of the 2.8.

Can I get mine with a mechanical pump and injectors?

why is the warranty so short?

🔷♦👁👁👍cummins lo mejor del mundo muy buen motor

Will this engine work in a 98-01 XJ?

Will there ever be a 4.2L six cylinder version? And is there any possibility of a "race only" version without the EGR system?

@brandongahm6208

6 жыл бұрын

yeah its called removing the EGR and tuning it.

@goober239

5 жыл бұрын

They can't due to federal regulations. You can delete the EGR yourself and the DOC, but please keep it on the track.

@jellyfrosh9102

5 жыл бұрын

@@goober239 ...Or just swap it into something older so you don't have to have it on there legally anyways.

@magnacartasamadams8189

4 жыл бұрын

@@goober239 Yeah to have equipment on your vehicle that will only destroy it over time Make it less fuel efficient And huge costs for repair

Is this kit around 6 or 7 grand?

I would love this in my 89 W150 but haven't seen and 727 adapter plates. or found anyone local to do an install lol

I wonder how well this would fit in a 2003 trailblazer, put this bad boy in there and find a way to fit a standard transmission behind it and it might not be bad, I know my current setup is pretty efficient, I get 20mpg at 75 mph with a 4l60 and 3.73s I have the vortec 4200 and there’s not too many hills I can’t get up in cruise control, it doesn’t even downshift

I would like to know about fitment of transmissions I have a 1987 ford bronco II it needs a new motor I like to have it installed I live in Columbus IN want shop could I go too to get this motor package installed

Are there any bell housing adapter kits for the Land Cruiser 80 series yet?

@CumminsEngines

6 жыл бұрын

Hi, Kal! There are several companies making adapters for this engine. The most common setup we have seen is to use an adapter from the R2.8 to a GM bolt pattern, and then a second adapter from GM to the Toyota transmission. We’d also be surprised if someone hasn’t already (or has one in the works) to go straight from the R2.8 to Toyota. Check out Axis Industries and Advance Adapters (or a quick Google search may highlight some others).

@johnhull6363

5 жыл бұрын

CumminsEngines what bellhousing pattern is standard...

@ForeverNeverwhere1

5 жыл бұрын

John Hull why not just get a land cruiser Diesel engine instead, bolt in, last forever and way cheaper.

@cumminsengines So where does the customer take their jeep when they can't figure out a fault code? Do they go to the nearest cummins facility? I'm guessing there's a 3 pin connector for a cummins tech? Could always tap in to the data link if not.

@sandslammer

4 жыл бұрын

Just pulled up the wiring diagram and found the dedicated data link.

@CumminsEngines if it's in the customers best interest to separate the ecu from the engine why not include a protective cover besides "put a plastic back over" a wiring harness that only God knows the cost of? Help us out with some factory goodness.

has Cummins received a California CARB number yet? I want to install one of these engines in my CJ7.

@WattsUpDev

6 жыл бұрын

Steve Zickefoose I thought all that was opted out on diesel build 97 & older? What year is the CJ7?

I was expecting a beautiful RED ROSE on top of wrapping.well schucks

I wonder if I use that swap on a rust free s10,or ranger if I could sell it for 12k?there are a lot of good bodies out there .

@mountain_man1432

5 жыл бұрын

You'd need either a gm or jeep transmission & probably an adapter plate. I just priced the motor, adapter plate, and an ax15 jeep 5 speed tranny (no flywheel or transfercase) at 12,327.02. With all the extra fabrication youd need (building motor mounts, tranny crossmember, etc.) I wouldn't sell it for a dime under 20k

Why is this repower kit not available in Texas / West Virginia? My guess is emissions standards.

@ShainAndrews

Жыл бұрын

Nope...

Hey, did I see that this had a re gen system?

@CumminsEngines

6 жыл бұрын

This engine does not come equipped with a DPF (Diesel Particulate Filter) so it does not require regens.

Hi Cummins can make vid about 'California' what years of vehicle can i swap this engine in and emission legal ?. thank you Cummins

How much is it for engine cummins 2.8

I have a 1995 Toyota T100 3.4 5VZ 4x4 Manual Transmission (same engine and drivetrain as Tacoma) has anyone thrown one of these in?

@CumminsEngines, how can someone get a hold of a 3D CAD model of the engine? (even if it's just an outer shell) I'm trying to lay out an MB in CAD, and want to install the R2.8 in it. Please tell me you can help with this request!

@CumminsEngines

6 жыл бұрын

Hi, Chuck! We are working with SEMA Garage to host our 3D models and drawings, but you will need to be a SEMA member to gain access to it.

@BlackenedBrew

6 жыл бұрын

And unfortunately, that's the problem. SEMA won't let the CAD enthusiast become a member, even if you want to pay the fee. I know quite a few people that would gladly pay the fee to be able to model their favorite rig to build, but because they aren't a business, SEMA won't grant access. Lots of these people (myself included) work in the engineering/design field, and we're used to non-disclosure agreements. I'd gladly sign and abide by a non-disclosure agreement so I could have an actual model to put in the rig (Willy's MB) I'm wanting to build. Even if it's just an outer shell that had motor mount locations, and accessory locations.

@James-vp2jn

3 жыл бұрын

You can have the engine scanned and turned into a 3D model. Faro Measurement Systems makes a scanner.

I am planning to do a mod on a 2000-2002 dodge dakota 4wd 4door transmission to fit

9k$? what if i let u keep all that emmissions junk do i get a discount?

Is this Cali legal

Any adaptors for 3rg gen 4runners as yet?

@shawnbrodrick8673

5 жыл бұрын

Call advance adapters

@yeoldmetalhead6592

4 жыл бұрын

Nice.

I'll stick with the old tried and true 4bt and 6bt. Just look at all those problems waiting to happen on the 2.8

Does it run on biodiesel!? Would be nice to see a video of one running BD

So today's question is..When are these available again!?? :) Backorder situation is ughh..

Wheres some pics of your old jeep steve

Soo you connect this diesel engine to a gas trans..

@cameronanderson7175

5 жыл бұрын

Might want to look into a different trans. Some people use jeep transmissions because of the rev difference between diesel and gas engines. I'd look into it. Diesels normally redline at 3,900

Wowwie, WOW.... 53,100 views. I guess this bad boy isn't only on my extreme list wish,. I sure wish it wasn't $9000.

My friend tried to buy a engine but said there was none to be had now and many months out . I use to turbo diesel Toyota 4x4 which was a ok truck but it was a id motor and ran like that . I have would consider this or even a Jeep and get rid of the Toyota . So when do you expect to have engines back in stock . I have a 95 4x4 12 that getting a g56 now . Having a good small truck to go and do what I want and get mileage like 30 is nice.

Where is the R2.8 built?

How about a 1950 Willys CJ3A?

Has anyone put one in Nissan Xterra ?

Where is the six cylinder????????

@holmes1956O

5 жыл бұрын

grumpybill why😠

What about a/c

It’s a mess dude calm down

How much?

I would wait till it has been around for a few years to get all the bugs out

Try offer this engine to pt.pindad indonesia for maung

One would think Made in China would reduce the price a little. $9k?

@techguylos213

5 жыл бұрын

Really? Made in China?

@lloydbrewer4229

3 жыл бұрын

$9k? What?!?!?! ....made in China ????? WTF ?!?!?! no wonder the country is falling apart at its seams

@adrianpaneda6467

3 жыл бұрын

They're made in the US

@John-hm7px

2 жыл бұрын

@@adrianpaneda6467 China

You can just give me one for freee lol good 👍👍

I think its overpriced. It should of been around $5-7,000. Not $9,000. Though I"m glad it finally came out.

@johnhull6363

5 жыл бұрын

Jeremy Rhodes but for the money? It's really a complete kit....low volume = high development cost

@tripleseven8361

5 жыл бұрын

I thought it was a great price...A comparable aircraft piston engine is upwards of $30,000 for what is arguably a much simpler engine and a less complete package...

@honda8770

4 жыл бұрын

$9,000 is priced exactly as it should. So some quick price checking NEW full package engine kits (everything needs to run) and you'll see this is priced right.

Low key really want to throw this engine in my crown vic... is that weird

@MrClarkisgod

3 жыл бұрын

I respect it.

2015 SL 2500 Cummins 6spd 4x4 4door Crew cab deleted 4" pipe, KN flat air filter camper shell EdgeCts2 computer 20gallon extra tank, 3 light bars =970watts, Setup as 1st responder, 10k+#, same mpgs since deleted by PFdiesel.com 25-32mpgs freeway 20-25 city, 10-20 off road Avg.MPGs From 78k to 200k Efficiency is measured TonXMiles per gallon used by scientist in the diesel truck industry 2015 RAM Cummins 4x4 4door= 5.2tonsX28+mpg=146Tmiles/gallon😀 Toyota Prius is 3200=1.6tX50 mpg=80Tmiles/gallon 😆 6ways MPG math confirmation 1-ram computer 2-garmin gps 3-google maps gps 4-USGS maps gps 5-AAA maps Android 6-hand=4 semesters calculus Diesel ECONOMY TIPS 1:Speed 55 & rpm 1500 2: Close Windows 3: No items on top of car 4: Make truck aerodynamic 5: Inflate tires 2 maximum 6: High rear end gearing3.42 7: Factory tall tires 8: 5-40w Synthetic Oil 9: avoid 4x4 driving 10: Remove excessive weight 11: Fuel is heavy too 12: Plan journey wisely 13: warm up engine 14: clean outside 15: Avoid RAIN 16: No aggressive driving 17: Don't over-rev. 18: Gear fast, slow & accelerate 19: Avoid idling. 20: Overdrive & cruise control 21: Ele&AC worsens MPG 22: Exploit cruising down hill 23: Avoid a complete stop 24: red>roll in neutral gear 25: Tune engine to low HP 26: Change oil regularly. 27: Replace air filters regularly. 33: Leave early Family drama 34 constant Mph=Mpg 36: avoid drama & stress 37 Park in shade 38 distance to prevent braking 39: Forced induction =MPG 41:Rough asphalt tire wear+7% 42:Use brakes to slow down. 43change fuel filters often 44change power train oils 45avoid wider tires 46avoid jacking truck height 47used tires =better MPGs 48TenDegrees=HalfMileMpg Obama Diesel Exhaust Cooker warranty expired 80k. 3rd Cooker by 75K so 78k I deleted. Save 10c mile or $1000/10,000 miles Or $10,000/100k miles! So if I deleted@0, $7800 saving + $10,500=$18,400 fuel savings!

@__WJK__

5 жыл бұрын

John Jason Chun - You by chance have a youtube channel...?...if not, you should!

Always a token chic.

That ain't no moister wicking bag! that's a VCI bag and it's coated with some sweet ass chemicals that coat the parts inside with anti corrosion crap. Many VCI's are hazardous but green ones are coming onto the market.

OK. They've been out for awhile now. Where's the performance parts?

@tadaho2128

5 жыл бұрын

What do you mean?

@blueschild61

5 жыл бұрын

Sinister Stephen Google Cummins R2.8 performance parts and you don't get anything. Tuners, turbos, intakes, etc.

My heart sank when I saw all the plastic parts 💔

Someone school me, it makes less horsepower and torque than the penastar. I do get that it has good low end torque and it'll last longer being diesel. But if I can make more torque at a little bit higher rpm why would I want this engine?

@holmes1956O

5 жыл бұрын

Eric DeLong if it has to be explained you probably will never get it. Get yourself a test ride in diesel and then maybe you will

Nice engine, contents etc. But the price is HIGH, to HIGH !

@CumminsEngines

6 жыл бұрын

Hi, Will. Thanks for watching the video! We find that if you do some research, the price is competitive within the new crate engine market, especially when you consider everything that is included in the kit. To purchase a comparable E-Rod engine as well as everything we supply, the end cost is very similar.

So do you not need the MAF sensor if you are doing an EGR delete? Goddamnit it's not a mechanical throttle body?? Welp there goes using this engine

Is this engine made in china and no parts are available?