CTi custom knee braces: the final fitting process︱Gall Brothers Medical
gallbrosmedical.com.au Fitting the CTi Custom knee brace is extremely important, as a good fit ensures the best protection especially against twisting forces in extreme sports such as motocross and enduro. Ideally proper knee protection requires custom knee braces, as a custom fit best reduces the chances of knee injury, especially from twisting motions so common dirt riding which can damage the ACL and other parts of the knee. Stephen Gall of Gall Bros Medical is very experienced at the fitting process for CTi custom braces and Gall Bros Medical are distributors for CTi Braces in Australia.
Gall Bros Medical website: gallbrosmedical.com.au
Gall Bros Medical Facebook: / ctikneebracesau
Gall Bros Medical imports CTI knee supports, ranging from Custom knee Bracing, Off-the-shelf bracing, Osteoarthritis Bracing, and Post-Operative Bracing. A custom knee brace like the CTi demands a commitment to quality. Hand-crafted to it’s owners measurements, CTi Custom Knee Braces are the ideal for knee protection with carbon fiber weave blended with advanced epoxy resins to produce ultra-light, and a sleek rigid frame for stabilising control of the knee. Australian motocross legend Stephen Gall is the founder of Gall Bros Medical. He realised the need for orthopaedic Knee Braces after rupturing both of his ACL knee ligaments in the 1980s. CTi's exclusive computer co-ordinates Custom Measuring System (CMS) helps ensure correct fitting to the knee.
Gall Bros Medical medical contacts and reps are very knowledgeable with all our products and we offer technical support over the phone and in person for sports knee braces. We stock a large range of all products in all sizes for many sports including enduro, dirt riding and motocross. Stephen Gall is especially knowledgeable about fitting the knee braces for dirt riding. The CTi Knee Brace is famous in extreme sports such as enduro and motocross the world over, making headlines since the 1980s. CTi was the brainchild of a keen motocross rider and skier but following an accident where he was hit by a car had suffered from ligament damage which had compromised his mobility and his ability to fully enjoy the sports he loved. After being involved with the medical aspect of knee braces, Gall Bros Medical decided to expand their business and become a distributor for other imported products which includes fitting the knee braces. We distribute our range of products to the retail, sports and medical market. Always remember correct fitting the knee braces is critical for knee protection!
Пікірлер: 6
I have one, it's pretty awesome. Only issue I have is after two hours of riding, the top of the brace likes to pull away for my thigh by about an inch. I just stop and readjust. I only have one on my right leg and it is very noticeable, hopefully I can afford to get another one on the left
Thank you very much. For me, very useful video.
I have been wearing braces for 30yrs. I prefer bottom straps to be just ( not tight at all) tightened up and the top strap loose. The reason u are wearing the brace is for exercise and the blood filling ur muscles will tighten the straps up. The absolutely most important strap is the one just below the knee. This strap stops the brace from migrating down ur leg. I have had to add padding on the lower part of the brace just to strap migration . I have had 4 braces and not one was fitted properly from the therapist. I had to customise them all including cutting holes in the brace for straps instead of those skin piercing stupid buckles most manufacturers put on the inside to annoy and cut your skin.
I really need some direction from you guys my user # at cti. In 1991 is 1092... I am 50 now " magic legs""!!!!!
I wish you guys were local to me because I have been trying to get custom cti braces sorted out for the last 3 years, I have had at least 12 yes 12 maybe 14 sets of braces made and they still don't fit as of today, every single brace has been way to small some so small the ossur rep could not even get it on my leg, it has been one of the very worst and most frustrating customer experiences I have ever had and I wouldn't recommend even my worst enemy to get cti braces. I tried dealing with corporate and the northeast ossur rep plus another ossur rep and all of them absolutely refuse to make a cast/mold of my leg or do a 3d scan all the do is use a tape measure and take pictures and every single brace is too small. I have returned all the braces I give up on ever getting a set that fit.
how do you transfer the measurements of leg to the ''carbon fiber brace itself'' ? are all solid parts of brace the same? if all measurements of leg are for straps . the measurements would be too elastic to worry about ,other than a tight fit. ..............