CT110 Postie Exhaust testing

Автокөліктер мен көлік құралдары

I was given a modified exhaust to try on my postie, The Exhaust has a baffled section, larger outlet and larger header pipe up to the baffles. I road tested the bike for a few days before putting it on my chassis dyno. My suspicions were confirmed.

Пікірлер: 8

  • @gravelyetigravelyeti4284
    @gravelyetigravelyeti4284 Жыл бұрын

    good stuff 🤙

  • @MrTSOPKAS
    @MrTSOPKAS11 ай бұрын

    Thanks a lot for the information ! I safe my $

  • @frashd

    @frashd

    11 ай бұрын

    No worries mate. I will be doing more testing over summer on other mods.

  • @CHINGY1993
    @CHINGY19933 ай бұрын

    Did the mixture lean out with the larger exhaust on it. I found mine full standard good filter valve clearances done etc is rich like .8 lambda at full throttle ? Was told they run rich from factory to help keep them cool

  • @frashd

    @frashd

    Ай бұрын

    I tried leaning these engines out and they make slightly more power but not enough to be able to justify holding it at full throttle for half an hour. I do know of a few bikes that have grabbed in the bore on a hot day from running them lean and mean at full throttle.

  • @darcykelly1982
    @darcykelly19828 ай бұрын

    take the airbox off from the crate at the back and see if that makes a difference, will help with it being too rich as well

  • @frashd

    @frashd

    8 ай бұрын

    Carby is way to sensitive. Tried it and failed

  • @darcykelly1982

    @darcykelly1982

    8 ай бұрын

    @@frashd Oh well, that is what i am going to do with my postie, as well as putting 2 exhausts on it and drilling out the main jet

Келесі